How to create a Pre-Loader

Hi,
I've watched several tutorials, and read several webpages on
how to create a pre-loader flash page, but I can't seem to figure
out how.
I like the one here:
http://jonhmchan.com (Yes,
JonHMChan)
Thanks so much!
(P.S. Using Adobe Flash CS4)

Hi KGlad,
I'm having exactly the same problem, so I downloaded your preloader.fla file, but unsure where to proceed with it now. The preloader which I normally use is an extension manager file which I access by dragging onto the stage and then via the components inspector I can add the swf file which needs to be pre-loaded. Unfortunately it is an asc2 file so from the above I gather it will not work with the swf file created and exported from InDesign.
Without a preloader, it works fine (as can be seen from the low resolution test file below)
http://www.carolsteele.co.uk/testing/test_01.html
The above links to a lower resolution version for testing purposes only - but I need a preloader as there is a distinct time lag before the swf file is loaded if I use the full version with a higher resolution image setting. If I use my normal preloader, it loads correctly, but the swf just simply runs through at high speed without stopping as can be seen in the link below.
http://www.carolsteele.co.uk/testing/test_02.html
How do I modify your fla file so as to load the swf file please.
Thanks in advance
Carol

Similar Messages

How do you uninstall pre-loaded software?

I am looking to free up some space on my hard drive, and I would like to get rid of the some of the unnecessary preloaded applications. I know that this can be done on windows but can it be done on macs, and if so how?

I agree with Eric in that if you haven't had your MacBook very long and can backup you data well it's probably best to reinstall using a "Custom Install" and pick and choose what you want on there.
AppZapper is.....mmm okay. I got it when MacZot had a deal and got it for 65 cents or I wouldn't have gotten it (Spotlight is just as good). Problem with most if not all of the pre-loaded application are they're package installed. AppZapper IMHO has limited success uninstalling them.
I used to use DesInstaller to rid myself of .pkg installs. I'm not sure if there's a Universal of it or not. I now use OSXPM which manages .pkg files (creates them too!) and while it's a beta it works well and it's free (so far).

How to create new pre-designed CSS layouts in DW CS4?

Since I'm a relative newcomer to Dreamweaver and CSS, I normally begin my new pages with one of Dreamweaver CS4's pre-designed CSS layouts in the Blank Page HTML section - 2 column fixed left sidebar, 1 column elastic centered, 3 column fixed header and footer, etc.
Lately I'm expanding to some more elaborate layouts and I'll like to be able to create new pre-designed CSS layouts of my own to add to this list. So I have a couple of questions:
1) What types of files are these layouts? They all seem to have an accompanying style sheet in addition to having a page template. What I'm getting at is, if I were to revise one of these, how would I save my revised version so that it would show up in this list of pre-designed layouts in the future?
2) Related to the first question, where are these pre-designed CSS layouts stored within Dreamweaver's file and folder structure? I can't seem to find them anywhere.
I appreciate your input on this.

Adobe scrapped the old Starter pages. Many things have changed since they were first introduced.
You'll find newer Templates and Starter Layouts below:
Dreamweaver CSS Templates for beginners
http://www.adobe.com/devnet/dreamweaver/articles/dreamweaver_custom_templates.html
New DW Starter Pages --
http://www.adobe.com/devnet/dreamweaver/articles/introducing_new_css_layouts.html
Ultimate Multi-Column Layouts -
http://matthewjamestaylor.com/blog/ultimate-multi-column-liquid-layouts-em-and-pixel-width s
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

How use a custom Pre-Loader

Hi, quick question
How can we modifies the default Pre-Loader of our APP ?
Regards,
Core

Hi Core,
the link below from ted is a good one for custom preloads
http://www.onflex.org/ted/2006/07/flex-2-custom-preloaders.php
check this out,
Arthur

How to create a data load file from Excel !!!

Hi All,
I'm new to HFM and would like to load data into an HFM application. As I have an Excel file with all the data. When I'm directly loading the data it throws an error saying "No section has been specified to determine if this is data, description or line item detail". How can I convert this excel file into proper format (.dat) file understandable by HFM ?

There are several ways to get this data into HFM.
1) FDM - best option if you have it
2) Webforms/Data Grids
3) HsSetValue formulas in Excel
4) DAT file loads
5) JVs, etc
If you wish to use DAT files created via Excel, you will likely want to use Excel VBA macros to create your DAT file to load. We do this on occasion for special projects and it works quite well. What you can do is set up an Excel file with your data inputs to look however you want, then link your POV members and amounts to another tab (we commonly call this the Export tab and it is set up in an HFM-friendly format).
Create a macro to write a DAT file to a specified location using data from the Export tab. The DAT file will need to be formatted as below. For a specific sample, you can extract data from your HFM app and see the format.
!Data
Scenario;Year;Period;View;Entity;Value;Account;ICP;Custom1;Custom2;Custom3;Custom4;Amount
Scenario;Year;Period;View;Entity;Value;Account;ICP;Custom1;Custom2;Custom3;Custom4;Amount
Scenario;Year;Period;View;Entity;Value;Account;ICP;Custom1;Custom2;Custom3;Custom4;Amount
Scenario;Year;Period;View;Entity;Value;Account;ICP;Custom1;Custom2;Custom3;Custom4;Amount
Scenario;Year;Period;View;Entity;Value;Account;ICP;Custom1;Custom2;Custom3;Custom4;Amount
Brush up on Replace, Merge, or Accumulate load options in the HFM Admin and User Guides, then upload your new DAT file.

How to create keyboard for Load Files into Photoshop

does anyone know if there is a way to create or is there an existing keyboard shortcut to Load Files into Photoshop from Bridge?

I should have been more specifc.
Much like in bridge-tools-photoshop-load files into photoshop, I want to load multiple files into a layered photoshop document.
Can't seem to find a keyboard shortcut for this action. Though I don't know how to write scripts very well but there are far too many keyboard shortcut posts I've searched and can't seem to find a way.
thanks

How to create several fast loading big albums in iWeb using your own templates

hi guys - here comes one for the real cracks.
i am trying to create a nice PICTURES page containing about 100 albums with each of it containing up to 100 individual pictures on my website, where i also have several videos online and (soon) audio files - everything available for download.
my problem is that the main "My album" page in iWeb will always ALL sub albums on just one page, which would in my case lead to endless loading time - i have now 30 albums online and it already takes ages to display all of them.
so i want to create several album pages, each of them displaying only 6 individual sub albums and this way allow a decent page loading time. this is usually done by just adding a new "my album" page using one of apple's templates. and here is my problem: my web site design is made from scratch and is not similar to any of apple's templates. since iWeb does not allow you to save your individual pages as "templates" i had to go a long way around, using iWebsites and merge a newly created picture template page (containing my own duplicated "my album") with ma main site. for some reason this did almost work out but in the end not really - if you are interested have a look at the separate discussion in this forum
https://discussions.apple.com/message/15532580#15532580 (how to save any iWeb page as a template)
so my question here is if any of you know of any other way to achieve my goal of getting several individual main albums containing 6 subalbums (this way it fits on one page and allow NOT having to scroll down at all) and this in a way which will fit the design of my web page. have a look at the now existing pictures page and imagine that i want more or less the same but divided in individual pages containing only 6 albums per page:
http://www.giorgiodellapietra.com/giorgiodellapietra.com/PICTURES/PICTURES.html
here an example of how it should look like in the end:
http://www.giorgiodellapietra.com/giorgiodellapietra.com/PICTURES/Seiten/MIXED.h tml#0
thank you very much for your impact.
cheers
george

hi folks
don't worry, i have given up as it really seems iWeb can not do this.
however, i have identified 2 possible solutions. the one i have chosen is to simply add new albums by choosing one of apple's templates and then modify it until it fits my design. i have created 15 additional main albums this way and it took me (because of the "mass production") only 15 minutes per album to get it done. now i have enough empty albums spare for the next few years...
the other way to accomplish what i wanted would have been to make the main "my album" page invisible for visitors and use it only for administration (so it can contain 100 albums but nobody would ever have to wait until they load). then create a new page which i call picture (copy any of my other pages and modify it) on which i will post some "virtual albums", which means use any picture out of an album and create a direct link to the album. i could use a vary low resolution version of the main pic and this way i would have a "picture" page which loads extremely fast but is actually nothing else than a link to the real album. then just copy this page as many times as i need albums and change the pictures and the links in it. the advantage is that it loads very fast, the disadvantage that i loose the ability to scroll through albums by moving the mouse over it, as what you see is of course only a picture and not the album.
i have chosen the first version because it has the advantage to be able to move albums as one pleases. however, both versions would be fine.
it's already done and eaten.
thanks anyway for reading yourself through this...
cheers
george

Can't Figure Out How to Create a Pre-Set leaving Exposure Unchanged

LR4.3, Windows 7 Home Premium 64bit
I have been trying to create a preset that updates the Process Version to 2012, changes contrast, highlights and shadows, but leaves the Exposure unchanged.
So, I change the Process Version to 2012, set the sliders for contrast, highlights and shadows where I want, and then I create the preset, leaving Exposure (and a bunch of other things) unchecked.
Then, I apply the preset to a photo that is currently Process Version 2010. The process version, contrast, highlights and shadows all change as expected, but the Exposure goes to zero. What am I doing wrong?
Thanks!

Ok, additional information
If I apply this preset to a photo that is already Process Version 2012, then the exposure remains unchanged.
If I apply this preset to a photo that is a previous Process Version, the exposure is set to zero. Why? How do I fix this?

How do you delete pre-loaded music on nokia 5300!

reallyy annoying.
iv tried everything 2 remove it & it just isnt working,
is there any-one who knows how?!

Took me ages to find this. The trick is to connect to your PC on "Data Storage Device Mode" - then you can see them and move or delete them. I found this on /discussions/board/message?board.id=phones&message.id=10066.
The answer is the final reply from jerry_lewis. I could not get his first solution to work on my phone -- I must have a different software version -- but the second solution works!

How do u delete pre-loaded music from nokia 5300?

hi, i was just wondering if anybody knew, its really annyoing iv tried to delete from the phone many times and theres no way.
does anybpdy no if its possible?

Connect the phone to the PC (as MSD), browse to the folder where the ringtones are and delete them Hope it helps.

How to re-install pre-loaded windows Operating system On LENOVO 3000 N200

Hi!
I am having re-installed Windows Vista Home edition on my laptop. Does anyone know a procedure to re-install the Vista for a clean install. I have not received any recovery disk from LENOVO along with the laptop. Do I need to download all drivers from the LENOVO web site to recover my system after the Vista re-install? Do someone has the recovery disk for this model (0769)?
Regards,.
Arun

Hi ljinks, welcome to the forum,
do you have a folder D:\drivers on your system? I believe that some Idea system do; it should contain drivers and preinstalled apps in which case hopefully you'll find it there.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

How to create pre-defined folder in the document sharing iView in a room?

Hi everyone,
As title, I would like to know how to create some pre-defined folder(s) in the document sharing iView in a collaboration room?
Hope you someone can help me~~
Thanks and best regards,
Marcus

Try it like this:
Help with collaboration rooms templates
and here are soem of those docs:
http://media.sdn.sap.com/public/KMKeywords/Collaboration-Room.html
Regards,
Darin

How to burn pre-loaded OS

Hi All!
I just wanted to ask, how can i burn or create a bootable DVD from the pre-loaded OS which is WIN 7 Home Premium x64. I dont have Windows automated installed kit (waik) and tis time consuming to download it for it is 1.37GB of size..any help will be much..Thanks

Pre-loaded OS is from the Recovery Disk. Instead of burning it directly, why don't you do a "Product Recovery Media" since burning those would also contain your OS and your factory initial condition.

How to create a complaint with pre-decessor document Inovice?

Hello experts,
I need create a complaint with reference to a pre-decessor document type Invoice (apart from other types such as sales order and service order). Can someone enlighten me
1) how to create an invoice in IC Web Client and backend?
2) how to create a complaint with reference to this created invoice in IC Web client and backend?
Thanks a lot!!!

Hi Easwar
Thanks a lot for answering the question.
Yes I do have CRM Billing documents. But the problem is
a) either the billing document doesn't have Transfer to Accounting status Transferred or
b) a transferred billing document, but all items have error "Unable to offset billing item 90003458 0000000060" etc.
Do you know
1) how I can make a billing document have "Transferred" status? Pressing "Transfer to Accounting" button in the billing document overview page will only set the status to "Being transferred". And it's always being tranfered.
2) What does the error "Unable to offset billing item ... "mean? How to get rid of them?
Thanks a lot!

How to create a load job in Oracle 9i

How do you create a basic load job in Oracle 9i? I'm really struggling with the syntax.
This is what I have so far and its not working. I am a Microsoft SQL Jr. DBA, Oracle is not a strong point :/.
Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
VARIABLE jobno NUMBER
BEGIN
DBMS_JOB.SUBMIT(:jobno,
'load data',
'infile oracle.csv',
'into TABLE HUB.PROVLKUP_LOAD_MATT',
'fields terminated by "|"',
'TRAILING NULLCOLS',
'(PROV_NO,PROV_NAME,FIRST_NAME,MI,TITLE,ADDRESS,CITY,COUNTY,STATE,ZIP,PHONE1,PHONE2,SPECIALTY,TAX_ID,PROV_NETWORK,EFF_DATE,TERM_DATE,PROV_TYPE,DO_NOT_REFER,DNR_DATE,DO_NOT_USE,NOTES)',SYSDATE, 'SYSDATE + 1');
COMMIT;
END;I actually want this job to be only run by the DBMS_JOB.Run command and not on auto schedule. Is there a way not to include a run date?
Edited by: 1007692 on May 23, 2013 11:38 AM
Edited by: 1007692 on May 23, 2013 11:39 AM

Welcome to the forum.
Oracle 9i is a database version from the previous century.
But:
You can read about DBMS_JOB in the 9i documentation here:
http://www.oracle.com/pls/db92/homepage
Or do some searches on http://asktom.oracle.com
Anyway: if you want the job to run once, then omit the interval...
Oh, and don't forget to read {message:id=9360002} from the SQL and Pl/SQL FAQ here:
SQL and PL/SQL FAQ
Edited by: Hoek on May 23, 2013 8:09 PM

How to create a Pre-Loader

Similar Messages

Maybe you are looking for