How to create a selection field in Infopackage

Hello Experts,
Greetings.
My Requirement is to have a infopackage to dynamically accept the selection field values
Now I Understand the we can only populate single ragne of values VIA ABAP Routine.
Eg: 0Plant : 1 to 99999999999
But now my requirement is to make Infopackage accept full range of single values.
like for Eg for Numeric values it should be
0Plant = 1 to 99999999999
for charcters plant from all characerstic material master
0Plant = CR_001
0Plant = CRWed
0Plant = QWET
Eg: It has a field 0Plant now i want this field to replicate as many plant as I get from Material Master table
How can this be achieved .
Regards,
Sachin Dehey,

Hello Sachin
You can add 0PLANT in the InfoPakckage more than once in the Data Selection tab by simply pressing '+' sign.
Like
0PLant 0000001 - 0999999999 ( this will be populated via routine or can be fixed values)
0Plant = CR_001
0Plant = CRWed
0Plant = QWET
THis selection will pull all the plants' data where plant is 000001- 0999999, and plant is CR_001, CRWed and QWET.
But I must acknowledge , I did not get your question properly. I replied based on my assumption.
Regards
Anindya

Similar Messages

How to create a new field for Q3 - QM notification in Header and item level

Dear All,
l
Sub: How to create a new field for Q3 - QM notification in Header and item level
Ref. the link --> Quality Notification
We want to create a new field in header level and item level.
As per the thread the solution is given below.
In the IMG Config: Quality Management -> Quality Notification -> Notification Types -> Define screen areas for notification types Then Choose 'Define screen areas' Then Click on 'New entries' button Now, select the relevant Notification Type and click in 'Enter'. Select the 'Iten Cases' register and remember to setup the Tabstrip Header, Icon, etc. Set the 'Tabstrip active' flag. Then Save.
Quality Notification -> Notification Types -> Define screen areas for notification types
WE ARE UNABLE TO FIND IN CUSTOMIZATION PATH --> DEFINE SCREEN AREAS FOR NOTIFICATION TYPES.
Please help.
Question No. 2 :
THE REQUIREMENT IS GIVEN BELOW.
We want to hide the field in Q3 - QM Notification
In header --> Reference tab --> Item (sub heading) --> "DEFECT LOCATION" FIELD TO BE ELIMINATED (HIDE)
Ref the link --> Quality notification
The solutiion is given below.
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
By double clicking the "DEFECTIVE QUANTITY (EXTERNAL), WE COULD NOT GET --> field TXTCDOT .
Plese do the needful.
We are using ECC6.0 Ehp3 and Ehp4.
With Best Regards,
Raghu Sharma

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

How to create a new field in a sub screen in material master. ?

How to create a new field in a sub screen in material master. ?
Kindly help us.
LIke wise tell me how to create a new sub screen as per my desired

Follow the documentation of Logistics - General->Material Master->Configuring the Material Master->Create Program for Customized Subscreens to add the new field in material master.
Create Program for Customized Subscreens
In this IMG activity, you can create a function group of your own by copying function group MGD1 (for industry) or function group MGD2 (for retail). The subscreens are not copied, except for two subscreens which are copied for technical reasons. You can use this copy to create subscreens of your own which you can assign to a data screen in the activity Define Structure of Data Screens for Each Screen Sequence.
Requirements
Be sure to read the program documentation first.
Activities
1. Create a function group of your own by choosing Execute.
2. Enter a name containing up to 25 characters, beginning with the letter Y or Z, and choose Save.
3. Access the Object Navigator.
You do this from the SAP standard menu by choosing Tools -> ABAP Workbench, and then Object Navigator.
4. Display either program SAPLMGD1 (industry) or SAPLMGD2 (retail) as required.
5. Copy the subscreens as required, ensuring that they already contain as many as possible of the field names you want to use in your function group. You do this as follows:
a) Choose Screens, position the cursor on the corresponding subscreen, and choose Copy in the context menu.
b) Enter the program to which you want to copy the subscreen, prefixing it with SAPL, and enter a screen number. Use the screen number of the original subscreen where possible. If the F1 help is specific to a particular subscreen, this ensures that this context-specific help continues to be displayed.
Example
You have called your function group YENTERPRISE, to which you want to copy subscreen SAPLMGD1 2301. Enter SAPLYENTERPRISE as the program to which the subscreen is to be copied, and enter (preferably) 2301 as the screen number.
6. Return to the initial screen of the Object Navigator and display your program. In the example above, you would enter SAPLYENTERPRISE.
7. Choose Update object list.
8. Select the subscreen you have copied and activate it by choosing Activate in the context menu.
Using the Screen Painter, you can remove fields you do not require on the subscreen or include additional fields from other subscreens (see the ABAP Dictionary). For information on the Screen Painter, see the SAP library documentation BC ABAP Workbench Tools.
Points to consider when removing or adding fields
Make sure that a field statement exists for each field on the subscreen since data may not otherwise be transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
For the fields you have added, include any check modules and modules for self-programmed F4 help that are called up for these fields on the original subscreen. You can do this by displaying the flow logic for the original subscreen and searching for such modules. They normally have the same names as the fields themselves. When you find a module, copy the corresponding module call to your subscreen.
If you change the order in which fields are transported that are checked together in the flow logic (such as the safety stock and minimum safety stock), you must deactivate the check module for the first field and activate it for the second. The system would otherwise transport the first field, and carry out the check before the second field is transported.
Any error messages that fields are unknown when activating the subscreen are due to the fields still being included in checks, even though you have removed the fields from the subscreen. Search for the fields in the source code and make the lines in which they appear comment lines. Then reactivate the screen.
9. Assign the subscreen to a data screen as required.
Note on transport
Use the Workbench Organizer to transport the copy you have created.
Proceed

How to get multiple selected fields in list

Hello all,
I am trying to get multiple selected value from a list but i dont know how to get multiple selected fields from a list though AS3.
Actually i want to pass the selected fields to php, so for that i need to get the selections and send to php.
Thankx..

i want to put the selected fields of list in an array through AS3....
actually......i figured it out how to do that...........
Its simple......use
list.selectedItems[index]
and to get the number of items selected......
list.selectedItems.length
simple.....

Quick Tip: How to create editable form fields | Acrobat X Tips & Tricks | Adobe TV

A short tip that details how to create editable form fields using Acrobat X Std. or Pro.
http://adobe.ly/wzXkmL

I have created a form which will be filled out by customers and sent back to me via 'submit' button. What I am trying to figure out is when we receive the filled out form, is there any way to have it as a pdf. To clarify, when the form is filled out and sent, the receiver opens the email and attached is a non-editable pdf. This way the customers information is no longer editable.

How to create the select option in the screen

HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Please search before asking - post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PM

Try RANGES.
The RANGES has same structure as that of select-options.

How to create multiple selection screens in reports

How to create multiple selection screens in reports
Thanks,
Sridhar

Ex: hope you will find an idea from the below example :
SELECTION-SCREEN BEGIN OF BLOCK SEL1 WITH FRAME TITLE TIT1.
PARAMETERS: CITYFR LIKE SPFLI-CITYFORM,
            CITYTO LIKE SPFLI-CITYFORM.
SELECTION-SCREEN end OF BLOCK SEL1
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN INCLUDE BLOCKS SEL1.
SELECTION-SCREEN BEGIN OF BLOCK SEL2 WITH FRAME TITLE TIT2 .
PARAMETERS: AIRPFFR LIKE SPFLI-AIRPFROM,
            AIRPTO LIKE SPFLI-AIRPTO.
SELECTION-SCREEN END OF BLOCK SEL2
SELECTION-SCREEN END OF SCREEN 5000.
INITIALIZATION.
TIT1 = 'ITIES'.
aT SELECTION-SCREEN.
CASE SY-DYNNR.
WHEN '0500'.
   MESSAGE W159(at) WITH 'SCREEN 500'.
WHEN '1000'.
   MESSAGE W159(at) WITH 'SCREEN 1000'.
ENDCASE.
START-OF-SELECTION.
TIT1 = 'CITIES FOR AIRPORTS'.
TIT2 = 'AIRPORTS'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
TIT1 = 'CITIES AGAIN'.
CALL SELECTION-SCREEN 1000 STARTING AT 10 10.

How to create the select option for the Plant in screen (Module pool)

HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Cross post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PM

Steps to get SELECT-OPTIONS in module pool programs.
1.Start one dialog program with SAPMZ_001.
Place the below code in the TOP include of the dialog program.
TABLES marc.
SELECTION-SCREEN BEGIN OF SCREEN 3200 AS SUBSCREEN.
SELECT-OPTIONS: werks FOR marc-werks.
SELECTION-SCREEN END OF SCREEN 3200.
2 .Create one screen 3000.
Go to Layout of the screen and Define subscreen area on the screen and Name it as l_subscreen.
Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN l_subscreen INCLUDING 'SAPMZ_001' '3200'.
PROCESS AFTER INPUT.
CALL SUBSCREEN l_subscreen.
Activate all.
Create Transaction code for the dialog program .
Execute the transaction code. You will see the select-option for werks how we see on Selection-screen.

How to create a calculated field

Hi. I'd like to know how to create a calculated field for a master- detail form. For example: having two db fields price and quantity, i created a the total item (price * quantity) as pl/sql function like this:
begin
:p13_item_total := :p13_price * :p13_quantity;
end;
However, the item is not calculated. It is not and instant calculation. I mean if i modify either price or quantity, how to recalculate item total immediately

You must submit the page to do it with PL/SQL. If you do not want to submit the page, you must do it with JavaScript.
Thanks,
Tyler

How to create a new field

how to create a new field form se 38 and update it to the customized table in the se11. I have done modification insertion deletion and update of field values in se 38 and has updated to the table in se 11. I want to know how to create a table from se38 and update it to the table in se11.I dont know whether it is possible. Enlight me.
with regards,
SREERAM M

Hi:
have a look
[Link1|http://www.wiziq.com/tutorial/17782-SAP-BDC-File-Handling]
[Link2|http://www.sap-img.com/abap/learning-bdc-programming.htm]
Regards
Shashi

How to Create the new Field ( Table - Row) in SAP B1

I have a scenario in which the Purchase calculation is based on LR, so for that we have to add new field in Purchase Document. that filed is not available in form setting. kindly let me know how to Create a new field in Purchase document.
Thanks

Hi,
I have adding new & existing forms and creating User Defined Field in row. example on adding a field in an existing Form and its corresponding to the database, including user input validations?
I want to add a new field in the detail section ( row area ) of a Production Document, and save it to database and read it back when the document is opened.
Thanks.
Syed Waqar Khurshid

How to Create a selection variable for Fiscal period/year range

How to Create a selection variable for Fiscal period/year range. The idea is to filter the query results using a fiscal period/year range user input rather than a full fiscal year input.

Hi Priya,
Open the query in a query designer -> in the left hand side you would find the fiscal year period under the time dimension -> right click -> create variable -> create the variable.
The better option would be use any of the SAP provided variable. You would find them under the Fiscal year period in the left hand side in the query designer.
Bye
Dinesh

How to create narow down field?

How to create narow down field?
when i type the data in a field that field show list of value in narrow down style...

Have you tried "Text Field with Auto-complete" ? ( available only in APEX4.0)
Regards,
Hari

How to create a LookUp field, selecting a value from another record type ??

Hello all,
I am looking to create a new field in Opportunity in CRM On Demand where we can give the user an option to select one of the records. Data in this search applet should come from another Record Type in CRM On Demand. I am not able to find any similar literature in the Help books.
I would appreciate if somebody could give me real life steps please.
Thanks a lot

Okay. I found the solution to this.
Now, along with this single reference, we also wish to bring the values of some more joined fields from the other record type in the Opportunities screen.
We were hoping that the Default value, and using fx, we should be able to achieve this using "joinedfieldvalue". However, it's not bringing back any value. Our expression is -
JoinFieldValue('<CustomObject3>',[<CustomObject3Id>],'<stState_ITAG>')
Please help if you have done this before.
Thanks & Regards

Can't see selection field on infopackage

Hi all,
i added a new selection field to a Z extractor con R/3, i repeated the DS on BW an reactivated all.
If i see the trans structure definition the field is checked as for selection but when i create a new infopackage it doesn't show the field filter.
How can i solve this ?
thx in advance

Hi Juan,
The field must be checked as a Selection in the datasource (check in RSA6).
Hope this helps...

How to create a selection field in Infopackage

Similar Messages

Maybe you are looking for