Cheque (Check) File output to external printer

My client does not want to use the standard cheque printing capabilities of SAP, and instead wants to print cheques on an external system. I need to find a way of producing a 'cheque file' out of SAP that we can send to this external system. I imagine that it would be a fairly basic data file with cheque numbers, amounts, payee information etc on it (i.e. data from the REGUH and PAYR tables).
I have not been able to find any standard SAP program/transaction etc for this. Does anybody know if such a facility exists. How would this integration to an external cheque printing system normally be set up?
Thanks for any advice that you can provide!
Julian

Hi Julian,
For our client requirement of the same nature, we had gone for a Z program with all the details of the payment details that need to feed in for a printing of check from external system. The tables you mentioned are correct. After running the F110 prg, the Z program develped by your abap consultant will have to run which will generate a file and send to the external system through an interface and the checks will get printed.
You have to give the required inputs to your abaper on what all fields have to be picked up from the table level, how to handle void checks etc.
hope this clarifies.
regards,
radhika

Similar Messages

Cheque printing error Restart number is not in the check file

Dear Sap friends,
I need to print the cheque using the standard program FBZ5. Since the client requires to change the description of vendor i am using FCH5 and manually creating the cheque for the payment document number.
After the cheque no is attached to this document number i go to FBZ5 and am entering this docuemnt number for printing the cheque.
Initially i am getting the error
You cannot print the manually created check AX002 AX002 500000
Message no. FS675.
This i have resovled by changing the message from error to warning.
Later when i press enter i am getting the following error.
Restart number is not in the check file or is not a From-number
Message no. FS562
How to i resolve this.
Please help.
Satish

Exactly,
If you really need such kind of facility, ask your ABAPER to develop a small report like below
Selection criteria
Document number - BELNR
Conmpany code - BUKRS
Fiscal year - GJAHR
Output criteria
Vendor name
Amount
Date
Form has to develop for Check prinitng
Thanks

Hi! I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is

Hi!
I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences > sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is listed in "shared folders" but under "users" everything is grayed out (it says "read and write" for "everyone" - but "read and write" is grayed out, and it doesn't let me add or subtract users). Now I can access all of the folders I shared from my imac except for the externalhard drive. What's going on?

Hi RRFS!,thanks for help.I forgot to tell that hard drive has 2 partitions 1:format :Mac OS Extended (Journaled) and that works properly,2:format:MS-DOS (FAT32) and when i "get info" for both :first has shering & permitions:You can read and write - with name and privilege, second has shaing & prermissions:You can read and write- without name and privilege

Will saving an eps file as a pdf change color output? Digital printing.

Hello, I recently sent in a reprint order of a client's package label file, and the color output is quite different. The first times I ordered these labels, I sent in an eps file. At the printer's request, I submitted the file as a pdf this time. I can't see any differences bewteen the eps and pdf files. They're both RGB, the color values are sttill the same in the file. Should the file type change result in such a different output? Thanks for any advice...

Switching from a RGB color mode to CMYK gives the same colors on Screen? Since the CMYK is a subset of the colors available in RGB this is not usually the case.
RGB color
CMYK color

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my we

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!

Hello Els,
it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable.

I am having trouble bouncing and creating an aiff file that plays back. I've checked my output settings, and although I am able to create MP3s, the aiffs are blank. The happens when I try to export a track as an aiff file - it's blank.

I am having trouble bouncing and creating an aiff file that plays back. I've checked my output settings which appear to be correct. Although I am able to create MP3s, the aiffs are blank. The happens when I try to export a track as an aiff file - it's blank.

When bouncing, do you use the Key Command or the button on the Output Channel Strip? The Key Command only bounces from the Stereo Output. The bounce button bounces from the Channel Strip it is on. So if you want to bounce out outputs 3-4 or higher, don't use the key command, but the button.
The strange thing here is that Logic, when it bounces an MP3, first bounces an AIFF, which at the end of the bounce process is being converted to MP3, so I can't imagine how you can get a silent AIFF and a normal MP3.
How have you listened to those bounces? iTunes? Quicklook? Quicktime?

Restart number is not in the check file or is not a From-number

HI!
I had posted payment Document but i got below error while reprint check from FBZ5
Restart number is not in the check file or is not a From-number
"Message no. FS562"
on that base, I had check below settinng
1) I had check Cheque no register . It's proper in series.
2)Tcd:FBZP -> Pmt methods in country -> select your country
and payment method 'C'. If 'Bank details' is checked on, then bank
details of vendor master is mandatory for that payment.
Awaiting for reply soon,
thanking you,
Rupang shah

Hi,
Commonly it will come for below situations:
1. Client decided to use this check lots for manual payment & this checks already used, so this type of checks system not allowed to take reprint.
2. You can only reprint checks created with F110, FBZ4, F-58 or FBZ5 (this checks have been printed by the system)
Check the Payment method wise checks it is already issued / not PAYR - RZAWE
system not allowed to reprint already exist in PAYR table checks.
if you already use one check with payment method C now you want to use the same lot for payment method X then system not allow to print.
Regards,
Viswa

How to send output of a print to a single pool in smartforms

Hi,
when iam taking a an out put from the invoice all the output has to be send to a single pool .means if we give an invoice number in vf03 and issue the output and if we choose print then it will directly got to spool.but requirement is to store all the spool numbers on application server and finall we have to convert all these into single pdf and then we have to print that.
can any body tell me where to store these spool numbers and how we can send at a time to print
help me pleases
sasi

Hi Sasi,
Check the following:
Exporting the Contents of a Spool Request as a PDF File
Use
You want to export the contents of a spool request as a PDF file to a directory of your choice, and print the file as required. The PDF file contains the print data in the format in which it would be output by the printer.
The following procedure is irrelevant for the PDF-based form printing integrated as of SAP Web Application Server 6.40, since a PDF file is already returned. See also Displaying and Printing PDF-Based Forms.
Procedure
The PDF file is generated as follows with report RSTXPDFT4:
1. Generate a spool request from the document to be printed.
2. In transaction SE38, start report rstxpdft4.
3. In the displayed window, enter the spool request number and the directory in which the PDF file is to be stored.
Leave the Download PDF File option selected.
Choose Execute.
4. In the next window, you can confirm or change the path in which the file is be stored.
Save your entries.
5. The system displays a log from which you can see whether the report was successfully performed.
You can then open the file from the directory and print it as required.
Constraints·        The PDF conversion only supports true bar codes for Smart Forms, which were generated with the new bar code technology. In all other cases, the bar code is only simulated.
·        PDF conversion, especially of ABAP lists, is slower and is therefore not suitable for mass printing. However, you can speed up the conversion to PDF using the FASTLISTCONV option in report RSTXPDF3.
·        The font selection for ABAP lists is predefined in the PDF converter and cannot be changed.
For more information about constraints, see SAP Note 323736 in the SAP Service Marketplace.
For further reference check the SAP documentation...
http://help.sap.com/saphelp_erp2005/helpdata/en/94/45c53bcc422d42e10000000a114084/frameset.htm
Thanks and Regards,
Bharat Kumare Reddy.V

Cannot copy files to/from external drive

Hi All,
Bit of a cry for help. I run an iMac 3.06 Ghz Intel Core 2 Duo with 10.7.3 and I'm having some serious problems with an external drive. Some history first - I have a large iTunes library (~3Tb) of everytype of media which I stored on an external NAS (iomega StorCenter) with no problems - then this NAS started to report a drive error with imminent failure. I purchased a new DAS (Western Digital) drive and moved all my content from the NAS to the DAS and everything was ok. Then I started to get errors through iTunes about cannot find the file and cannot read the files - and then I couldn't access anything on the drive. At this time I thought this was a different problem because I was running preview Mountain Lion, or there was an actual fault with the disk. After investigation, and coughing out for Data Rescue 3 I found that somehow the entire file structure had been corrupted and all my files had been orphaned. So at this point I had one dying NAS drive and one DAS which wasn't usable and no space to recover any files to.
So - next step was to purchase another external drive (and returned the WD) - this time I went for a G-Raid 4Tb (non-thunderbolt) drive and I've been in the process of recovering files from backups and iTunes. I've had no problems until today when yet again I've started getting errors and now I have problems copying files to/from this G-Raid drive.
Technical details - OS-X 10.7.3 - G-Raid 4Tb formatted as Mac OS Extended (Journaled) - currently showing 1,163 folders and 15,452 files.
Symptoms - using finder drag and drop copy a file from the g-Raid to desktop results in 'The operation can't be completed because the item 'xxx' is in use. - 'The operation can't be completed because one or more required items can't be found (error code -43).' and the copy fails.
Using the cp command I get a 'Resource Busy' error.
However, this is not for all files - I've managed to copy all my books back to the desktop ok, when a couple came up with the above error I tried again and it copied successfully.
I have run Disk Utility - here are the details :-
- 4TB G-Tech - Verify
Verifying partition map for “G-TECH”
Checking prerequisites
Checking the partition list
Checking for an EFI system partition
Checking the EFI system partition’s size
Checking the EFI system partition’s file system
Checking all HFS data partition loader spaces
Checking Core Storage Physical Volume partitions
The partition map appears to be OK
Volume (Media) - Verify
Verifying volume “Media”
Checking file systemPerforming live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Unused node is not erased (node = 24190)
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Unused node is not erased (node = 24784)
Checking volume bitmap.
Volume bitmap needs minor repair for under-allocation
Checking volume information.
The volume Media was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Click Repair Disk.
Verify and Repair volume “Media”
Volume repair complete.Updating boot support partitions for the volume as required.Error: Couldn’t unmount disk.
Verify and Repair volume “Media”
Volume repair complete.Updating boot support partitions for the volume as required.Error: Couldn’t unmount disk.
Verify and Repair volume “Media”
Volume repair complete.Updating boot support partitions for the volume as required.Error: Couldn’t unmount disk.
Verify and Repair volume “Media”
Checking file systemChecking Journaled HFS Plus volume.
Checking extents overflow file.
Unused node is not erased (node = 94)
Checking catalog file.
Invalid sibling link
Rebuilding catalog B-tree.
The volume Media could not be repaired.
Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
and it's just got worse - in getting the info for this post I no longer have access to the drive.
This is the second time this has now happened on two different directly connected drives (USB and Firewire) - which means the problem is elswhere. I've a stack of errors in the system.log file
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** /dev/disk1s1
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** Phase 1 - Preparing FAT
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** Phase 2 - Checking Directories
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** Phase 3 - Checking for Orphan Clusters
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: 0 files, 201632 KiB free (403265 clusters)
May 10 17:52:38 Neil-Cattons-iMac com.apple.usbmuxd[29]: _SendAttachNotification (thread 0x7fff799da960): sending attach for device fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.: _GetAddrInfoReplyReceivedCallback matched.
May 10 17:52:38 Neil-Cattons-iMac usbmuxd[29]: _AMDeviceConnectByAddressAndPort (thread 0x100781000): IPv4
May 10 17:52:39 Neil-Cattons-iMac iTunes[747]: _AMDDeviceAttachedCallbackv3 (thread 0x1180fc000): Device 'AMDevice 0x7ffe6d2d04a0 {UDID = f398e56f8aa95276585e0c5f74544bc24dda99bd, device ID = 58, FullServiceName = fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.}' attached.
May 10 17:52:40 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:52:46: --- last message repeated 1 time ---
May 10 17:52:46 Neil-Cattons-iMac com.apple.usbmuxd[29]: _SendDetachNotification (thread 0x7fff799da960): sending detach for device fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.: _BrowseReplyReceivedCallback got bonjour removal.
May 10 17:52:46 Neil-Cattons-iMac iTunes[747]: _AMDDeviceDetached (thread 0x1180fc000): Device 'AMDevice 0x7ffe6d2d04a0 {UDID = f398e56f8aa95276585e0c5f74544bc24dda99bd, device ID = 58, FullServiceName = fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.}' detached.
May 10 17:53:40 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in _copyFile:error (2) opening 0.directoryStoreFile
May 10 17:53:40 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in recoverIndex:Unrecoverable error: could not recover path index (0.)
May 10 17:53:40 Neil-Cattons-iMac mds[39]: (Normal) DiskStore: Rebuilding index for /Volumes/Media
May 10 17:53:40 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed
May 10 17:53:49 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:54:01: --- last message repeated 1 time ---
May 10 17:54:01 Neil-Cattons-iMac login[1000]: DEAD_PROCESS: 1000 ttys000
May 10 17:54:05 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:54:35: --- last message repeated 3 times ---
May 10 17:54:38 Neil-Cattons-iMac com.apple.usbmuxd[29]: _SendAttachNotification (thread 0x7fff799da960): sending attach for device fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.: _GetAddrInfoReplyReceivedCallback matched.
May 10 17:54:38 Neil-Cattons-iMac usbmuxd[29]: _AMDeviceConnectByAddressAndPort (thread 0x100781000): IPv4
May 10 17:54:46 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:54:50: --- last message repeated 3 times ---
May 10 17:54:50 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in _copyFile:error (2) opening 0.directoryStoreFile
May 10 17:54:50 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in recoverIndex:Unrecoverable error: could not recover path index (0.)
May 10 17:54:50 Neil-Cattons-iMac mds[39]: (Normal) DiskStore: Rebuilding index for /Volumes/Media
May 10 17:54:50 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed
May 10 17:54:51 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:54:55: --- last message repeated 5 times ---
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 238d0016, actual seed is 7fdcc233
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 2f760017, actual seed is 1befd79f
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 255a0018, actual seed is 41a7c4c9
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 292e0019, actual seed is 6b68079a
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 2263001a, actual seed is 4e6afb66
May 10 17:55:01 Neil-Cattons-iMac kernel[0]:
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** /dev/disk1s1
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** Phase 1 - Preparing FAT
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** Phase 2 - Checking Directories
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** Phase 3 - Checking for Orphan Clusters
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: 0 files, 201632 KiB free (403265 clusters)
May 10 17:52:38 Neil-Cattons-iMac com.apple.usbmuxd[29]: _SendAttachNotification (thread 0x7fff799da960): sending attach for device fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.: _GetAddrInfoReplyReceivedCallback matched.
May 10 17:52:38 Neil-Cattons-iMac usbmuxd[29]: _AMDeviceConnectByAddressAndPort (thread 0x100781000): IPv4
May 10 17:52:39 Neil-Cattons-iMac iTunes[747]: _AMDDeviceAttachedCallbackv3 (thread 0x1180fc000): Device 'AMDevice 0x7ffe6d2d04a0 {UDID = f398e56f8aa95276585e0c5f74544bc24dda99bd, device ID = 58, FullServiceName = fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.}' attached.
May 10 17:52:40 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:52:46: --- last message repeated 1 time ---
May 10 17:52:46 Neil-Cattons-iMac com.apple.usbmuxd[29]: _SendDetachNotification (thread 0x7fff799da960): sending detach for device fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.: _BrowseReplyReceivedCallback got bonjour removal.
May 10 17:52:46 Neil-Cattons-iMac iTunes[747]: _AMDDeviceDetached (thread 0x1180fc000): Device 'AMDevice 0x7ffe6d2d04a0 {UDID = f398e56f8aa95276585e0c5f74544bc24dda99bd, device ID = 58, FullServiceName = fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.}' detached.
May 10 17:53:40 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in _copyFile:error (2) opening 0.directoryStoreFile
May 10 17:53:40 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in recoverIndex:Unrecoverable error: could not recover path index (0.)
May 10 17:53:40 Neil-Cattons-iMac mds[39]: (Normal) DiskStore: Rebuilding index for /Volumes/Media
May 10 17:53:40 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed
May 10 17:53:49 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:54:01: --- last message repeated 1 time ---
May 10 17:54:01 Neil-Cattons-iMac login[1000]: DEAD_PROCESS: 1000 ttys000
May 10 17:54:05 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:54:35: --- last message repeated 3 times ---
May 10 17:54:38 Neil-Cattons-iMac com.apple.usbmuxd[29]: _SendAttachNotification (thread 0x7fff799da960): sending attach for device fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.: _GetAddrInfoReplyReceivedCallback matched.
May 10 17:54:38 Neil-Cattons-iMac usbmuxd[29]: _AMDeviceConnectByAddressAndPort (thread 0x100781000): IPv4
May 10 17:54:46 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:54:50: --- last message repeated 3 times ---
May 10 17:54:50 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in _copyFile:error (2) opening 0.directoryStoreFile
May 10 17:54:50 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in recoverIndex:Unrecoverable error: could not recover path index (0.)
May 10 17:54:50 Neil-Cattons-iMac mds[39]: (Normal) DiskStore: Rebuilding index for /Volumes/Media
May 10 17:54:50 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed
May 10 17:54:51 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:54:55: --- last message repeated 5 times ---
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 238d0016, actual seed is 7fdcc233
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 2f760017, actual seed is 1befd79f
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 255a0018, actual seed is 41a7c4c9
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 292e0019, actual seed is 6b68079a
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 2263001a, actual seed is 4e6afb66
May 10 17:55:01 Neil-Cattons-iMac kernel[0]:
I'm now out of ideas and when I got in touch with G-Tech support I got "Unfortunately the drive seems to have been corrupted. You can try to retrieve the data using third party data recovery software such as Data Rescue 3. You can find the software at a discounted rate at the following page:http://www.thedatarescuecenter.com/gtech-data-recovery-software.html If you have any further questions, please feel free to ask."
any help/advice/pointers very much appreciated as I really don't want to have to start recovering again :-(
Thanks all.

Hi Ncat,
I might have had similar problems with yours. Finder stuck at 'Not Responding' while I boot my Macbook Pro with external HDD plugged in, my macbook heats up considerably maybe because it keeps trying to access the external disk. And Finder can only proceed after I unplugged my external hard disk.
So what I did was:
I rebooted my macbook into recovery mode (by holding cmd+R before / during the booting chime
I used the Disk Utility from there (instead of from normal booting)
Then I proceed to with 'Repair Permissions' and 'Repair Disk' for each and every partition of the external harddisk, and also my internal hard disk.
Rebooted after everything's done, and now it seems to work.
I hope that it will work for you

Need to generate check writing output in plain text format in 12.1.3.

In 11.5.10.2 a plain text file output can be created which is then used with a third-party software from Secure32 to create AP checks. Now in 12.1.3 I cannot get this same plain text output for check writing. The XML output contains flags which cannot be used with older version of Secure32 (upgrading Secure32 is not an option)
Go-live is 30 days away and AP check cannot print. Because of time constraints theire is no time to set up and use the embedded R12 check writing features.
Any help of tips would be appreciated - thanks.
Edited by: user702225 on Dec 20, 2011 9:24 AM

In 11.5.10.2 a plain text file output can be created which is then used with a third-party software from Secure32 to create AP checks. Now in 12.1.3 I cannot get this same plain text output for check writing. The XML output contains flags which cannot be used with older version of Secure32 (upgrading Secure32 is not an option)
Go-live is 30 days away and AP check cannot print. Because of time constraints theire is no time to set up and use the embedded R12 check writing features.
Any help of tips would be appreciated - thanks.
Edited by: user702225 on Dec 20, 2011 9:24 AM

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

"Check Input Output Prompt" when trying record master.

Been going through the ringer on Print to Video w Final Cut Express 4 to my Canon XHA1 1080i. Finally got rid of the "Transcoding to HDV" prompt after converting file to QuickTime and changing my sequence settings. My VCR signal set up is correct (checked w Canon) and my firewire cable is fine. Still receiving "Check Input Output" when I go to record on camera. Any suggestions would be greatly appreciated!

It's been seven (7) days since I filed a suport case, no reply from WD...The way this is going the drive will soon end up at a recycling station after it has been smashed with a hammer. :-(Which means I will be in the market for a non-WD NAS very soon, they don't seem to support their customers very well. Buggy firmware, ages between fixes, inability to actually upgrade, and lack of support. Disappointed to say the least.

I need to do a clean install of maverick on my 2010 mbp what disk do i use and how do i move certain files from an external hard drive

I want to do a clean install of maverick on my 2010 mbp. I need to know what disk to use and also how i take certain files off my external hard drive and put on my computer. When I was having problems with my airport they did a clean install and they pulled files of my time machine.   however they forgot to put the partition back in for a windows side. Originally I had Parellels on my computer. After my external hard drive got corrupted i called apple and they fixed the problem but didn't have me set up the time machine except for the external hard drive. Now my only back up is from the external not from the laptop.    I am not sure how to do any of this. I am not computer savvy...PLEASE I NEED HELP>

First, you need to make a backup of your MBP onto your external drive. I suggest you start by cloning your MBP drive to the external drive:
Clone Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
This clone is fully bootable and also contains a clone of your Recovery HD.
Second, you need to do a clean install of OS X onto your MBP as follows:
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
This should accomplish your goals. You will have a clean install of OS X on your MBP and a bootable clone of your old system and all your files on the external drive.

HT2674 I have an iMac purchased in May 2011. OSX Lion 10.7.3. I deleted backup file from the external hard drive. Now, the trash can will not empty some of the files deleted. File folder: "Core Services" contains a locked file: "boot.efi". It will not

I have an iMac purchased in May 2011. OSX Lion 10.7.3. I deleted backup file from the external hard drive which operates from Time Machine.
Now, the trash can will not empty some of the files deleted from the backup harddrive.
The trash contains-- File folder: "Core Services" which contains a locked file: "boot.efi".
It will not delete.
How do I get the trash can empty of these files?

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

How to check the output of a recordset in Stored Procedure.

Hello,
I need to check the output of below code:
create or replace PROCEDURE GETUSERINFO (p_recordset OUT Types.cursor_type) AS
BEGIN
OPEN p_recordset FOR
SELECT userid,
username,
password,
role,
assignrole,
emailid
FROM tbl_users
WHERE userid=18;
END GETUSERINFO;
Kindly help me.

user12631197 wrote:
Hello,
I need to check the output of below code:
create or replace PROCEDURE GETUSERINFO (p_recordset OUT Types.cursor_type) AS
BEGIN
OPEN p_recordset FOR
SELECT userid,
username,
password,
role,
assignrole,
emailid
FROM tbl_users
WHERE userid=18;
END GETUSERINFO;Kindly help me.in sqlplus do this
var rc refcursor
exec getuserinfo(:rc)
print rcNote: Use {noformat}.. your code here ..{noformat} tags to preserve your code format.

Cheque (Check) File output to external printer

Similar Messages

Maybe you are looking for