How to create a Stage area in Windows XP and which is the best MS-OS
Hi all,
Please can somebody share the topics to install the R11 in Windows OS.
Please give some details on this \I have Oracle installtion guide still i have some problem.
Satyan
Setting up stage area
1. Log in as the operating system user with sufficient privileges to mount, umount,
and eject the DVD. This user must also have write privileges to the stage area that
you set up.
2. Insert the Start Here disk in the DVD-ROM drive.
3. Mount the DVD (conditional)
If your system runs on a UNIX platform, and if you do not use AutoMount, you
must mount the Start Here disk at this time.
4. Verify software version (perl).
You must have perl 5.0053 or higher installed, and it must be in your PATH. Use
the following commands to identify the perl version and its location. The
command is the same for both UNIX and Windows platforms:
perl -v
If perl is not present, download it from perl.com. For Windows users, the perl
shipped by MKS is not certified. Use ActivePerl, which you can also download
from perl.com.
5. Run the adautostg.pl script.
UNIX:
$ cd
$ perl /mnt/cdrom/Disk1/rapidwiz/adautostg.pl
Windows:
C:\> perl d:\mnt\cdrom\Disk1\rapidwiz\adautostg.pl
The stage script message informs you that you can stage all the Rapid Install
components or only selected components.
6. Set up the stage area directory.
At the prompt for the stage directory, enter the name of the system top-level
directory. The Rapid wizard stage11i directory will be created in this path. For
example, if you enter /u01 as the top-level directory, the resulting directory path
will be /u01/Stage11i.
7. Indicate the components to be staged.
The script prompts you to choose the components that you want to stage:
1 - to choose Oracle Applications
2 - to choose Oracle Applications with NLS
3 - to choose Oracle Database technology stack (RDBMS)
4 - to choose Oracle Applications database (Databases)
5 - to choose Oracle Applications technology stack (Tools)
6 - to choose APPL_TOP
7 - to choose National Language Support (NLS) Languages
Enter one or more components, separating each one with a space. You can indicate
that you want to stage only the database technology stack (3), only the APPL_TOP
(6), and so on. If you choose 1 (the default), all the components will be staged.
However, this choice does not include the NLS component. You must explicitly
select it by choosing 2, or by indicating that you want to stage language (NLS)
software (7).
8. Indicate whether you will stage language (NLS) software (conditional).
Starting Rapid Install
Getting Started 1-11
If you choose 1 or 7 at the prompt, the script asks you for the language code of the
languages to be staged. If you enter more than one language, separate the codes
with a space.
9. Insert the Rapid Install DVD.
Insert the Rapid Install software as required in the prompt. The system message
lists the files it has copied and their location in the stage area directory.
10. Insert the NLS DVD (conditional).
If you indicated that you will install languages, the script prompts for the
language software it needs to complete your installation.
Message was edited by:
Rajan SVR
Similar Messages
-
Okay so first things first this isn't the newest macbook pro. When I open about my mac and go to system report it says it is a Macbook Pro 3,1 and the Boot Rom Version say MBP31.0070.B07. Originally when starting up Boot Camp Assistant there where only two options, the "create windows 7 bootable usb" was not there at all. So after some editing and helpful tutorials I was able to get the option show up and created a bootable usb with windows 7 and downloaded the support software onto a separate flash drive. Finally I did the last step and created a second partition for windows. Once the process is complete my computer automatically restarts.
This is where the problem is. Once my computer makes the booting up sound it doesn't load up windows it gets stuck on a apple logo as if it's trying to reastart normally and can't. So I shut down and this time I hold down the option key during start up. It brings up the main partition and some recovery thing but no windows partiton and no bootable usb.
I forgot to mention that I am running OS X 10.9.3. Okay any body want to help me out? Iv'e been at this for hours and can't get an inch closer to having windows. Please and thank you!
P.S. If I missed a discussion that answer my question just point me to it. Iv'e been looking for a while, but who knows i might have missed one.The only known way to make it work on an external drive is by first installing Windows onto an internal drive, then cloning the install to an external Thunderbolt drive. Thunderbolt is seen as an extension of the internal bus, so Windows doesn't see it as an external device.
-
How to create a text area with spell check and other functions similar to word?
I want to allow users the ability to copy and paste their content on to the site. The problem is giving them the option to use spell check and other word like features to my site. My goal is to develop some thing similar to how we post our question in this forums.
Some old and some new.
http://www.webdesignbooth.com/15-really-useful-web-based-html-editors/
You realize you'll need to use server-side scripts and a database for this. Instead of re-inventing the wheel, you might just want to install WordPress, Drupal or Joomla on your site.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com -
How to create own customized screensaver on Windows 7 Embedded Standard sp1
Hi Support,
How to create own customized screensaver on Windows 7 Embedded Standard sp1 OS.
Regards
YASH PAL SINGHThis forum is for POSReady. wES7 forum can be found here:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=quebecmisc
Create the screen saver in Windows 7 first and then put the file in the distribution share to be included in the image. There are tools that can help create a custom screen saver:
http://download.cnet.com/windows/screensaver-editors-and-tools
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET -
How to Create Roaming Profile(s) For Windows Workgroups
This Tutorial Shows how to create roaming profile(s) for Windows Workgroups.
Here are the steps in order to do this:
On the host PC:
1. Goto 'Folder Options'>'View' and un-tick 'Use Simple File Sharing'.
2. Goto Network Connections and right click on the 'Local Area Connection' (Ethernet recommended)
3. Goto Properties>General, and tick 'File and Printer Sharing'.
Click Apply + Ok.
4. Goto Control Panel>User Accounts, add a new user.
5. Logon to this user, and open the profile folder properties.
5b. Share this folder.
6. Make the Share permissions so that 'everyone' has: Full Control, Read, Change.
Click Apply + Ok.
7. Click on 'Caching' and disable Caching for this Share.
Click Ok.
8. Now goto the 'Security' tab and give 'Administrator' and 'SYSTEM' 'Full Control'.
Click Apply + Ok.
On the remote PC(s):
1. Make the same User as on the Host.
1b.Logon to the account and log back out again. Delete the profile folder from 'Documents and Settings'.
3. Give 'SYSTEM': 'Read','Read and Execute','List Folder Contents' to the 'Administrators' Profile
4. Type 'lusrmgr.msc' into run, goto: 'Users', double click on the new user and goto the 'Profile' tab.
4b. In the 'Profile Path' box, type \\hostPCname\ProfileName.
Click Apply + Ok
*Note* Replace the \\path\ accordingly to what names are on your Host PC.
5. Goto regedit>HKLM\Software\Microsoft\Windows NT\CurrentVersion. Double click
on 'ProfileList'.
Find which key is for the new user. (Example S-1-5-21-58435627-18431725-18026167-1003)
6. Right click that key and goto: 'Permissions' and give 'SYSTEM' 'read'.
*Note* Once you logon to the roaming profile from the remote PC for the first time you can undo this step.
7. goto GPEdit>Computer Configuration/Administrative Templates/System/User Profiles:
Enable these settings:
'Do not check for user ownership of roaming profile folders'
'Delete cached copies of roaming profiles'
'Log users off when roaming profile fails'
"Add the Administrators security group to roaming profiles'
'Prevent roaming profile changes from propagating to the server'
7b. Make 'Timeout for dialog boxes' '1' (seconds)
8. goto: Computer Configuration/Security Settings/Local Policies/Security Options:
Make 'Number of previous logons to cache (if server is unavailable) '0'
Now you're ready to login to the Profile on the remote PC.
*Note* Sometimes, when windows loads it takes a minute for the profile folder to become shared again.
Thanks for reading.Hi,
I have replied to the below thread mentioning the FM's to create Profile sets, profiles and also target groups. This may be helpful to you.
Re: target group creation
Regards,
Priyanka -
How to create a report in Form line Style and can display Image field?
Hi,
In Report builder 10g, I would like to create a Report with Form Line Style and this report included a Image field.
I can choose this Style only when Select Report type is Paper Layout. Because, If I choose Create both Web & Paper Layout or Create Web Layout only then in the next Style tab 03 option Form, Form letter and Mailing Label be Disabled.
But in Paper Layout, my report can not display Image field.
I tried with Web layout and all the other Styles (Except 03 mentioned be Disabled) then all Styles are displayed Imager field OK.
How to create a report in Form line Style and can display Image field?
I was change File Format property of my Image field from text to Image already in Property Inspector. But report only showed MM for my Image field.
Thanks & regards,
BACH
Message was edited by:
bachnpHere you go..Just follow these steps blindly and you are done.
1) Create a year prompt with presentation variable as pv_year
2) Create a report say Mid report with year column selected 3 times
- Put a filter of pv_year presentation variable on first year column with a default value say @{pv_year}{2008}
- Rename the second time column say YEAR+1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)+1
- Rename the second time column say YEAR-1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)-1
Now when you will run Mid Report, this will give you a records with value as 2008 2009 2007
3) Create your main report with criteria as Year and Measure col
- Change the fx for year column as CAST(TIME_DIM."YEAR" AS INT)
- Now put a filter on year column with Filter based on results of another request and select these:
Relationship = greater than or equal to any
Saved Request = Browse Mid Report
Use values in Column = YEAR-1
- Again,put a filter on year column with Filter based on results of another request and select these:
Relationship = less than or equal to any
Saved Request = Browse Mid Report (incase it doesn't allow you to select then select any other request first and then select Mid Report)
Use values in Column = YEAR+1
This will select Year > = 2007 AND Year < = 2009. Hence the results will be for year 2007,2008,2009
This will 100% work...
http://i56.tinypic.com/wqosgw.jpg
Cheers -
When I have the downloads window open and I close the browser window, the next time I reopen the browser while the downloads are still going, it returns me to the last page I was on. All previous versions of Firefox would return me to my homepage which I would prefer. Please let me know if this is possible.
When you re-open Firefox and choose Restore Session, by default it picks up your most-recently-open window, and the other windows should then show up in Recently Closed Windows.
The Firefox add-on Session Manager lets you manage how many closed windows and closed tabs are saved, in case it's not enough. -
How to create automatic creation of BP from customer and vendor master data
Hi gurus,
can any one tell how to create automatic creation of BP from customer and vendor master data.
Please give me the steps.
Thanks
Sasikanth.HI,
Goto SPRO\ Cross application components \ Master data synchronization \ Synchronization control.
Assign account groups of customer and vendors to respective BP grouping. This setting is enough to create BP in background while creating customer / vendor. But the fields groups are very much important, ensure mandatory fields should be sync.
rgds,
Srini -
I purchased a soundtrack on iTunes (Windows 7) and five of the songs that downloaded get cut off before they finish playing...any idea how to get it fixed?
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
I need to show dirty water, the treatment, and the clean water after treatment. It is necessary to see how the water flows in the tubes.
Which is the best Adobe program fr this job?After Effects, but be ready for a steep learning curve. Third party plug-ins may be required if you want realistic flow. Schematic diagrams are fairly easy to create with After Effects. I do it all the time.
-
How to create labeled table of Content with expand and collapse
Hi All,
Can somebody help me how to create labeled table of Content with expand and collapse as example given below:
User1
Template1
Template2
User2
+
User3
Template1
Template2
Like when we see expand (+) and collapse (-) button when we click on 'about this page' link.
Thanks
BhupendraHi,
Tou can use Table inside table to show the details this way but I'm not sure about Expand/Collapse.
Expand/Collapse are part of HGRID.
I think we can develop this functionality with little manipulation.
Regards,
Reetesh Sharma
Edited by: Reetesh Sharma on Jun 28, 2010 4:56 AM -
How to create a cube/ods/infoobjects etc..and also why to create the same
Dear Friends
how to create a cube/ods/infoobjects etc..and also why to create the same objects.
thanks & Regards
RamanaHi Friend,
Creating Infoobjects
1. Go to RSA1 -> Modelling tab.
2. Click on Infobjects.
3. Create a new Infoarea.
4. Now create Infoobject Catalog for Characterstics and Key Figures.
5. Now create Char Infoobject under Char Catalog and Key figure Infoobject under Key Figure catalog.
Creating Cubes:
1. Right click the info area and choose create info cube.
2. Select the type of cube you wish to create and comnfirm your selections.
3. The next screen is where you actually define the cube.
4. Now you will notice the difference.
5. Place your cursur on key fig and right click and chose infio object direct input; chose your key fig for the cube.
6. Similarly for the dimension; right click the dimension and chose inbfo object direct input, chose your chars and out them in dimension.
7. Activate the cube.
Creating a ODS is also the same.(in step 1 choose create ODS)
Creating Multicube/Multiprovider
1. Right click the info area - chose create multi provider.
2. select the cubes , DSOs, info objects that you need for the multi provider.
3. On the right side of the screen, you will see all the objects that you selected and open the key fig and dimension and drag the ones you need to define the multi provider.
4. Identify the chars and key figs.
5. Acvitate the mullti provider.
Why we create them ?
Infobjects : They are fields in R/3. As we require fields in R/3 tables we require infoobjects in BI.
ODS : This actually is like a table in R/3.
Cube : This contain the Key figures.(e.g Sales quantity, Amount etc)
Hope it helps.
Regards
Hemant Khemani -
How to create a query to see Opening stock and closing stock as on particul
Hi All,
How to create a query to see Opening stock and closing stock as on particul.
Regards
AlbaikHi,
In BI 0IC_C03 will provide u the required information and also having standard queries provided by the SAP.
Plz find the list of Queries provided by the SAP.
=======================================================================================================
Inventory turnover 0IC_C01_Q0001
Range of coverage - quantity 0IC_C01_Q0002
Range of Coverage - Value 0IC_C01_Q0003
Range of coverage of finished goods - quantity 0IC_C01_Q0004
Range of Coverage of Finished Goods - Value 0IC_C01_Q0005
Range of coverage of raw materials - quantity 0IC_C01_Q0006
Range of Coverage of Raw Materials - Value 0IC_C01_Q0007
Obsolete Stock on Hand 0IC_C01_Q0008
Period-dependent requirement coverage 0IC_C01_Q0009
Value of stock on hand 0IC_C01_Q0010
Quantity of stock on hand 0IC_C01_Q0011
Material consumption 0IC_C01_Q0012
Material Movements 0IC_C01_Q0013
Consignment stock: receipts and issues 0IC_C01_Q0014
Valuated stock: receipts and issues 0IC_C01_Q0015
Material stock and movements 0IC_C01_Q0016
Material Movements (Healthcare) 0IC_C01_Q0020
Material Consumption (Healthcare) 0IC_C01_Q0021
Material Availability 0IC_C01_Q0022
Inventory Turnover Frequency (Value) 0IC_C01_Q0023
Consignment Stock Received and Issued per Unit 0IC_C01_Q0024
Material Consumption (Quantity) 0IC_C02_Q0001
Valuated Stock Receipts and Issues (Quantity) 0IC_C02_Q0002
Range of Valuated Stock (Quantity) 0IC_C02_Q0003
Inventory Turnover 0IC_C02_Q0004
Receipt and Issue Consignment Stock at Customer 0IC_C03_Q0001
Receipt and Issue Quality Inspection Stock 0IC_C03_Q0002
Vendor Consignment Stock Receipt and Issue 0IC_C03_Q0003
Receipt and Issue Stock in Transit 0IC_C03_Q0004
Receipt and Issue of Blocked Stock 0IC_C03_Q0005
Valuated Stock 0IC_C03_Q0006
Stock in Quality Inspection 0IC_C03_Q0007
Stock in Transit 0IC_C03_Q0008
Blocked Stock 0IC_C03_Q0009
Vendor Consignment Stock 0IC_C03_Q0010
Consignment Stock at Customer 0IC_C03_Q0011
Stock Overview 0IC_C03_Q0012
Stock Overview (as of 3.1 Content) 0IC_C03_Q0013
Quantities of Valuated Project Stock (as of 3.1 Content) 0IC_C03_Q0014
Valuated Stock (as of 3.1 Content) 0IC_C03_Q0015
Quantities of Valuated Sales Order Stock (as of 2.1 Cont.) 0IC_C03_Q0016
Inventory Turnover 0IC_C03_Q0017
Days' Supply 0IC_C03_Q0018
SUS: Vendor Consignment Stock 0IC_C03_Q0019
Scrap 0IC_C03_Q0020
Inventory Aging 0IC_C03_Q0021
Stock Overview - extended 0IC_C03_Q0022
Demand Supply Match 0IC_C03_Q0023
Warehouse Stock Analytics Inventory Turnover 0IC_C03_Q0024
Warehouse Analytics - Obsolescence and Variance 0IC_C03_Q0025
Stock Overview: Materials 0IC_C03_Q0030
Average Stock Value Over Time 0IC_C03_Q0031
Stock Overview Over Time 0IC_C03_Q0032
Range of Coverage Over Time 0IC_C03_Q0033
==================================================================================================
Regards
Ram.
Edited by: Ramakanth Deepak Gandepalli on Jan 18, 2010 8:06 AM -
I have windows 8 and I have the most updated version of Itunes, my iphone 4s connects, but nothing plays from my itunes all items have the cloud next to it, and they are dithered out
In the course of your troubleshooting to date, have you worked through the following document?
No content shows up in iTunes after updating -
How to create A web services step by step and their uses
How to create A web services step by step and their uses with their T-Codes
pls dont send any links
thank you
Regards,
Jagrut Bharatkumar ShuklaHi
Use the Tcode <b>WFWS</b> to create the Web service
enter the Transaction to whih you wants create the web service and save
Regards
Anji
Maybe you are looking for
-
I have read about may different ways to export from iMovie to QuickTime, but it seems that my movie is always a huge file for about 3 mins of video. I was wondering how people have a larger than normal movie screen that loads very quickly. Any soluti
-
Request for R9 270X Gop UEFI Bios
I need the GOP uefi bios for MSI R9 270X Hawk Thanks!
-
Apex_web_service.make_request fails
Hi, Im trying some of the examples here: http://download.oracle.com/docs/cd/E17556_01/doc/apirefs.40/e15519/apex_web_service.htm#BABGEIAH But I cant get it to work.. It fails on this part: apex_web_service.make_request Here is the code: declare l_env
-
Call procedure from table??
Hi İ have a table which name is procedures and it has columns that id, procname. I have a procedures and them names are in table as procname. So I want to use table and execute procedures acoording to porcedure's id. I am trying execute immediate but
-
Imac internet connection very slow
All of a sudden everything has slowed to a crawl. Is there something I can do? don't think it's Comcast because my Iphone is working fine.