How to create additional column in CM21, CM25

Hi,
my task is to add additional column into the orders grid of cm25. I found that the user exit CYPP0005 could be used for that. Can anyone share an example of implementing EXIT_SAPLCYPP02_001?
Best regards, Pavel.

Hi Pavel,
To Implement user-exit, follow the steps
1. Go to CMOD transaction code
2. Give Project as ZPRJ_001 and click on Create button
3. Give some description what for the exit .
4. Click on Enhancement assignments give your Enhancement and and press Enter.
5. Now click on Components button. You can see the function module EXIT_SAPLCYPP02_001.
6. Double click on EXIT_SAPLCYPP02_001 function module.
7. In the Source code you will see one include that is zxcy1u07. Double clik on zxcy1u07. After that you will see some message. Just press ENTER button. No need on message . just press ENTER .
8. It asks you to create Include ZXCY1U07. Click on YES and proceed to write code.Once you code save and Activate function module. And come back Project by pressing back button. and finally activate the project.
9. Go to Transaction code or program where this Use exit has been called. Execute and check whether expected result is coming or not.
10. Try to put break points in the source code of function module EXIT_SAPLCYPP02_001.
I hope that you will get . Let me know if you have any problem in implementing.
Thanks
Venkat.O

Similar Messages

How to create some columns dynamically in the report designer depending upon the input selection

Post Author: ekta
CA Forum: Crystal Reports
how to create some columns dynamically in the report designer depending upon the input selection
how export this dynamic report in (pdf , xls,doc and rtf format)
report format is as below:
Element Codes
1
16
14
11
19
10
2
3
Employee nos.
Employee Name
Normal
RDO
WC
Breveavement
LWOP
Sick
Carers leave
AL
O/T 1.5
O/T 2.0
Total Hours
000004
PHAN , Hanh Huynh
68.40
7.60
76.00
000010
I , Jungue
68.40
7.60
2.00
5.00
76.00
000022
GARFINKEL , Hersch
66.30
7.60
2.10
76.00
In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
Can anybody help me how do I design such report....
Thanks

Hi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu

How to create dynamics columns in oracle query1.

hi,
how to create dynamics columns in oracle query.its very urgent.
regards
prasad..

Urgent is it?
Why? Have you forgotten to do your coursework and you'll get thrown off your course if you don't hand it in today?
What makes you believe that your request for help is more important than someone else who has requested help? It's very rude to assume you are more important than somebody else, and I'm sure they would like an answer to their issue as soon as they can get one too, but they've generally been polite and not demanded that it is urgent.
Also, you assume that people giving answers are all sitting here just waiting to answer your question for you. That's not so. We're all volunteers with our own jobs to do. How dare you presume to demand our attention with urgency.
If you want help and you want it answering quickly you simply just put your issue forward and provide as much valuable information as possible.
Looking at your post you haven't told us what database version you are using, you haven't provided any create table DDL's and insert statements to populate that with sample data, and you haven't even shown us that you've had a go at doing something yourself.
You will find if you post on here demanding your post is urgent then most people will just ignore it, some will tell you to get lost, and some will explain to you why you shouldn't post "urgent" requests. Occasionally you may find somebody who's got nothing better to do who will actually provide you with an answer, but you really are limiting your options by not asking properly.
/rant
As a basic example of dyanamic SQL:
DECLARE
cur PLS_INTEGER := DBMS_SQL.OPEN_CURSOR;
cols DBMS_SQL.DESC_TAB;
ncols PLS_INTEGER;
BEGIN
-- Parse the query.
DBMS_SQL.PARSE(cur, 'SELECT hiredate, sal FROM emp', DBMS_SQL.NATIVE);
-- Retrieve column information
DBMS_SQL.DESCRIBE_COLUMNS (cur, ncols, cols);
-- Display each of the column names
FOR colind IN 1 .. ncols
LOOP
DBMS_OUTPUT.PUT_LINE (cols.col_name);
END LOOP;
DBMS_SQL.CLOSE_CURSOR (cur);
END;
/

How to create sub columns in interactive report

can u tell me , how to create sub columns in
interactive report. i really need it.i search lot but i dont get proper information.
help plz...
example : -
|_____total_ persons _____|
| persons | male | female |
100 200 3000
400 500 600

i am nile.
select id as id,
male as male,
female as female
from persons.
i want interactive report with main column total persons(static text) in that male , female.
e.g.
|___total persons_| - - - - -> main cloumn
| male | female | - - - - -> sub columns
100 200
300 400
Edited by: user9512075 on Aug 29, 2008 1:46 AM
Edited by: user9512075 on Aug 29, 2008 1:47 AM
Edited by: user9512075 on Aug 29, 2008 1:48 AM
Edited by: user9512075 on Aug 29, 2008 1:49 AM

How to create two columns in a header?

Can anyone tell me how to create two columns in a header please?
Thanks!!

Sandra,
I'm suspicious about your motives. It just doesn't seem logical to me to put so much content into a Header that two columns would be required.
You might consider the alternate header-like approach; use a Text Box set to two-column format and Format > Advanced > Move Object to Section Master.
Jerry

How to create a column graph with colors per set of values

I need to create with Microsoft Excel, a column graph that based on different values, each column will contain different color.
To be precise:
E.g.:
- Green: If it is 0
- Orange: If it is between 0 and 10
- Red: If it is more than 10
I would appreciate to help me how to do this.

Hi EriValidata,
According to your description, I get the result as shown in the following figure.
Is this a correct result? If yes, this is an excel chart with conditional formatting. Please try the following steps to create the chart.
To accomplish this task, you will need to create three additional columns of data and plot those three columns of data-and not the original column of sales data – in a stacked column chart. As shown in the figure.
And the formula in C2 is: =IF(AND(B2>0,B2<=10),B2,0). The formula shows the value in column C if it falls between the limits in rows 0 and 10; otherwise it shows 0. The formula is filled into the range C2:E4.
Then we select the source data with A2:A4 and C1:E4, as shown in the figure to insert a column chart. The chart now shows 3 sets of colored bars, one for each data range of interest.
And I upload a TEST2.xlsx file on OneDrive, you can download this file via this link:
https://microsoft-my.sharepoint.com/personal/v-lzng_microsoft_com/Documents/Shared with Everyone
Hope it’s helpful.
Regards,

How to create additional Line in file based on condition available as part of ZINVOIC02 Idoc segment

Scenario Details:
Receiving Zinvoic02 Idoc in PI. Idoc to file translation creates comma separated file with .csv extn
The logic was kept in such a way that how many E1EDP01 (items) are available in IDoc that many no of records will be created in csv file.
The file logic for some the fields is as below:
No of records
InvNumber
InvDate
CusNumber
LineitemDesc
Tax1Type
Tax1%
for 1st E1EDP01
E1EDK01-BELNR
E1EDK03-DATUM
E1EDK01-PARTN
Populate when E1EDP04/MSKWZ=O2 or O4 with E1EDP19/KTEXT
Hardcode when E1EDP04/MSKWZ=O2 or O4
Sum all E1EDP04 /MSATZ when E1EDP04/MSKWZ=O2 or O4
for 2nd E1EDP01
E1EDK01-BELNR
E1EDK01-DATUM
E1EDK01-PARTN
same as above
same as above
same as above
for 3rd E1EDP01
E1EDK01-BELNR
E1EDK03-DATUM
E1EDK01-PARTN
same as above
same as above
same as above
Additional Line to be created when one or more of E1EDP01 is having E1EDP04/MSKWZ = O3
same as above
same as above
same as above
Hardcode "REIM for USE TAX"
Hardcode ""
Hardcode ""
Now we have got addition requirement to add a new lineitem when tax code is equal to O3 for any of the E1EDP01.
Is it possible to create additional lineitem based on condition. If yes, please share what should be the approach.
How we can create the additional lineitem?
Currently we are using E1EDP01 to do context handling.
The target structure is :
MT_FILE
     INVOICE     0..unbounded
          InvNumber     0..1
          InvDate          0..1
          CusNumber     0..1
          LineitemDesc     0..1
          Tax1Type          0..1
          Tax1%               0..1

Hello,
Please add one extra field in the data structure of the target mapping and let its occurrence be 0..unbounded under the root node 'MT_ADP_Invoice'.
Apply the condition, if tax code MSKWZ (with its context changed to E1EDP01) equalsS to '03', then map it to the newly created target field whose occurrence is 0..unbounded.
This will then create an additional field which is your requirement.
The above is one way.
But if you want to have the same target field name as ADP_File appended for tax field being '03'.
Then in that case you can you two message mapping for one common operational mapping / interface.
In the first message mapping you need to have one target data structure created with the source data structure remaining the same as the one shown by you in scrn shot. Now this target data structure will be similar to the source, except that you need to add one more field at the end(name different from other fields) in target (whose occurrence should be 0..unbounded), and it needs to be mapped to E1EDP01 provided the tax code field MSKWZ(its context changed to E1EDP01) equalsS to constant '03'.
In the second message mapping you need to map the target structure of previous message mapping to the actual required structure. The newly added field should be mapped to ADP_File of your final target structure.
This will then create the same structure as required.
Note : Please change the occurence of ADP_File to 0..unbounded.
Regards,
Souvik

How to create a column where each subsequent entry is added to the former?

How does one create a column, inside Numbers, where each subsequent cell is added, in value, to the preceding cell above it? For example, a column could be labeled "credit card subtotals for the month." In the first cell, one might insert a dollar value, eg., $24.00. The next credit card charge might be $100.00 and that would be added to the $24.00 to create a running subtotal.
Thank you.

Hi Jay,
Both formulas are written as they would appear entered into C2.
The 'special formula' is also written as it would appear in C2. Where I have used 'formula for C2' substitute your choice of the two formulas listed above the 'special formula' in my earlier post.
If you choose to use the first version, the finished 'special formula' will look like this in C2:
=IF(LEN(B2)>0,SUM(C1,B2),"")
Jerry's remarks regarding using conditional formatting to suppress the display of zeroes is well taken, but in this case, will not work as there are no zero values to be hidden.
In this case, either of the initial formulas will repeat the last 'running balance' in every cell from the last row containing an entry in column B to the bottom row of the table.
The formula checks, by counting the number of characters displayed, whether an entry has been made in the column B cell on the same row as the formula (B2 in the example in this post. IF an entry has been made, the formula calculates the sum of that entry and the previous running balance. IF no entry has been made (ie. there are no chanracters displayed in B2, the calculation is skipped, and the empty string ( "" ) is placed in C2, giving the appearance of a blank cell.
Example: the formula in this post is used in column C. Column D uses the core of that formula (with the C1 reference replaced by D1) without the IF statement. Both formulas are filed down to the bottom cell in their columns. Note the difference in rows 7 and below:
Regards,
Barry

How to create New columns for the Internal Table Dynamically?

HI Guys,
In my logic i have to create new columns depending on the logic which i am executing.
My requirement is .I have to display o/p like this
Material || Year || Period || Mix ratio || Vendor ||Mix Ratio || Vendor || Mix Ratio Vendor || Mix ratio || Vendor || Mix ratio.............................from table's CKMLMV003 and CKMLMV001.Her i have to display the o/p in the above format and i have to display Vendor and Mix Ratio for 5 columns irrespective of data .If i have more than 5 columns for any record then i have to create a New columns dynamically for Vendor and Mix ratio.If anybody want my code i can Submit But plz tell with example how to do?
<b>The O/P must be finally shown in ALV Grid</b>
Thanks,
Gopi

You must create the entire internal table dynamically, you can not add columns to a statically define internal table. Here is an example of creating a dynamic internal table.
Creation of internal table dynamically based on the Date Range entered
Regards,
Rich Heilman

How to create a column that automatically creates a serial number?

How can I create a column that creates a serial number for each entry?

you could do something like this:
I assumed that the serial number only needs to be present if you have entered some information in the other columns of the corresponding row.
A2=IF(COUNTA(2:2)>0, REPT("0", 6−LEN(ROW()−1))&ROW()−1, "")
this is shorthand for... select cell A2, then type (or copy and paste from here) the formula:
=IF(COUNTA(2:2)>0, REPT("0", 6−LEN(ROW()−1))&ROW()−1, "")
To fill down:
select cell A2, copy
select column A by clicking the columne header (the "A" at the very top)
unselect cell A1 by holding the command key while single clicking cell A1
paste

How to create table columns dynamically ?

Hi All,
I am working on an SSRS report that will show sales in the past 5 years. If the user selected to view sales of past 3 years he will only see 3 columns. so How can I create table columns dynamically at run time and how can I make sure that their dimensions
will adjust to fit the report page size.

Hi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu

How to create logical column...

Hi experts,
i am new in using obiee... i would like to ask how to create a logical column based on a select statement. i have a column report_date and the logical column will be a distinct year-month of that column.. please refer below..
REPORT_DATE
7/1/2006
7/1/2006
8/23/2007
8/26/2007
6/3/2008
6/9/2008
this is the format i want to have in my logical column..
2006-7
2007-8
2008-6
thanks in advance... :)

hi,
thank you for your reply, i just created a view just to have a column with the data that i want then used the column in the business layer.. :D

How to create hidden column in Oracle Table

Hi folks
i have one doubt regarding hidden column creation in Oracle Table..
Let me briefly explain my requirements.
I have one table called UWRMC_MAST is table contain the following columns
        RMC_N_ID           NUMBER(10)                    NOT NULL,
     COB_N_ID           NUMBER(2)                      NOT NULL,
     SUBCOB_N_ID     NUMBER(2),
     RMC_C_CODE      VARCHAR2(10 BYTE)         NOT NULL,
     RMC_C_NAME      VARCHAR2(100 BYTE)       NOT NULL,
     CREATED_N_BY   NUMBER(10)                     NOT NULL,
     CREATED_D_DT   DATE                              NOT NULL,
     MODIFIED_N_BY NUMBER(10)                     NOT NULL,
     MODIFIED_D_DT DATE                              NOT NULL,
     RECORD_N_STS   NUMBER(1)                      NOT NULL,
     RMC_C_REMARKS VARCHAR2(256 BYTE),
     EFFECT_D_DT     DATE                           NOT NULL
RMC_N_ID is primary key
i want to create one column like Old_EFFECT_D_DT as virtual column
when ever i update the effective date that date should be insert into Old_EFFECT_D_DT i.e., Virtual Column
For example
SQL> select RMC_N_ID, COB_N_ID, SUBCOB_N_ID, RMC_C_CODE, EFFECT_D_DT from uwrmc_mast;
RMC_N_ID   COB_N_ID SUBCOB_N_ID RMC_C_CODE EFFECT_D_
        46          1          74 PCTMOTR    02-FEB-11
Below i update the effective date(01-feb-2011
SQL> update uwrmc_mast
2 set EFFECT_D_DT = '01-apr-2011'
3 where rmc_n_id =46;
1 row updated.
But i want a result like below
SQL> select RMC_N_ID, COB_N_ID, SUBCOB_N_ID, RMC_C_CODE, EFFECT_D_DT from uwrmc_mast;
RMC_N_ID   COB_N_ID SUBCOB_N_ID RMC_C_CODE EFFECT_D_   OLD_EFFE
        46          1          74 PCTMOTR    01-APR-11   02-FEB-11Is this possible to do in oracle , kindly give a solution for my requirement
Regards
Arun

Arun wrote:
Hi Mr.David_Aldridge
Am having the doubt that's why i posted my quires in oracle forums.. just i want to know whether my requirement suit for VIRTUAL COLUMN in Table.
Regards,
ArunWell, I'm not sure exactly what your requirement is.
If you want to audit changes to the records of that table then it would be better to use Oracle's auditing facility. If this previous change date is really a required part of your actual application functionality then you might use the application itself to maintain the previous date as a column in the table, as you say, or if you need to maintain the history of changes then add a new table so you can keep track of multiple changes.

How to show additional column in the Query searchby field selection window?

Hi Experts,
I have a simple query as below:
select * from ocrd where cardcode between '[%0]' and '[%1]'
Now, it is evident that the searchby field is the cardcode, so when I click on the browse button, all cardcodes will be displayed for me to choose on a separate selection window. Now, on this separate selection window, can I also show an additional column "customer name"?? This is because I cannot really identify every customer code, and need to depend on customer name instead.
Thanks!
Warmest Regards,
Chinho
note: please dont ask me to use the below query instead, that is not what I want to achieve.
select * from ocrd where cardname between '[%0]' and '[%1]'

Hi!
It's not possible i belive. You can use Filter Option instead on Selection Parameter.

Create additional column

I have no experience or training in Illustrator and am trying, with the aid of Classroom in a Book to pick it up as I go along. I have a table with several columns. I need to add an additional one. I'm thinking I'd do that by using Area Type Options but every time I click on Type, Area Type Options is always greyed out. What am I doing wrong, not doing?
All advice much appreciated.
Thanks

I have a table with several columns.
When discussing Illustrator (or any program, really), it's really important to carefully state what kind of objects you are actaully describing. There is no "table" object in Illustrator. You may have AreaType objects or PointType objects or PathType objects arranged in columns or rows. If they are PathType or AreaType objects, they may or may not be Threaded so that continuous text auto-flows between them. You may have a "single" AreaType object spit into columns and rows (which is really nothing more than multiple threaded AreaType objects with a "live" edtiability regarding the number of columns and rows and their spacing).
Illustrator's convoluted and problematic text handling is very outdated, very poor, and is probably the worst program in the world for creating what most people mean by a textual or data "table." It provides no end-of-column character, so if text is threaded, you can't properly force continuous text to jump to the next threaded "cell" (text object) before you reach the text-content limits of the object. (In fact, Illustrator's Find & Replace feature doesn't even provide a special character to facilitate searches for hard returns!)
In threaded PathType objects, a hard or soft return will cause threaded text to jump to the next object, but that, of course, makes it impossible to use hard or soft returns normally within a single "cell" of the "table" you try to build that way.
In any proper table feature, ordinary tab-delimited text automatically flows into the row/column cells. Good luck on trying to make that happen in AI.
The only decent way to make a textual table of continuous text in Illustrator is by using paragraph styles with Tabs set to delineate columns. But again Illustrator falls short because there is no way for tab stops except the last one to allow for differing numbers of lines. (Even Adobe InDesign has this problem.) So using paragraph styles and tabs, whenever you need an inner column cell to contain additional lines is to resort to entering the additional lines in what what would really be additional "rows" (paragraphs), and tab-tab-tabbing to the appropriate "column."
Despite Illustrator's unnecessary feature glut complication, the only decent way to fake a proper text table (one that allows for automatic content-driven row height in any column) in Illustrator is to just arrange a bunch of un-threaded text objects in a grid, key text into them individually, and manually adjust their height or spacing as needed for multiple lines in a "cell" of a "row." Utterly lame.
I need to add an additional one.
You can add a column to an AreaType object, since that's the only kind of threaded text construct in AI that has any "live" editability. But doing so will cause the threaded text to reflow in the new order. So you can't, for examle, insert an additonal column between existing columns and have the text of existing columns stay where it should be, as is possible in any proper table feature.
If your "table" is a bunch of individual threaded AreaType objects, then you could marquee select the existing columns to the right of where you want the new column, drag them rightward, create a new column of text objects in the vacated space. But then you'd have to tedously re-llink the flow order.
So again: In short, don't expect anything like a conventional-wisdom text table functionality in Illustrator. It isn't there.
In FreeHand, Adobe owns an innovative and elegant text-handling feature which allows you to set continuous text in a table fashion using nothing but paragraph styles. The elegantly unobtrusive feature is a Wrapping Tab stop. Using that feature, you can make any tab stop(s) in continuous paragraphical text automatically accommodate as many lines as needed. Adobe would do very well to incorporate this feature in all of its text-handling applications, including InDesign. With this feature and support for inline graphics (which Illustrator also still does not support), you don't even need an old-fashioned "tables" feature. This feature has existed in FreeHand for something like 15 years. That's just one example of how antequated Adobe Illustrator really is.
JET

How to create additional column in CM21, CM25

Similar Messages

Maybe you are looking for