How to create customer specific fields within PC 10.0?

Hello,
for previous Process Controls versions 2.5 and 3.0 it was available two how-to guides to create customer specific fields. Nevertheless so far I couldn't find those versions for PC10.0.
Does anyone have them? Or know if the 3.0 version is also valid for 10.0?
Regards
Andre Yuji

Dear Johannes,
We have a few administration transactions that you can use on back-end. For example:GRFN_STR_CHANGE -GRFN_STR_CHANGE-Change Process Control
as well as RE_RHGRENZ4 to Set a new end date to the objects.
At last case, you can run the program RHRHDL00 thru SE38 Tcode.Be carefull because this program delete the object from database.
Regards,
Karina Atonaidan

Similar Messages

How to populate customer specific field data in table /SAPAPO/ORDFLDS

Dear Gurus,
I have explained in detail about the problem we face. I guess persons who has implemented enhancement: /SAPAPO/RRP_IO_COL in their system can help me out.
Background:
Purchase requisitions in APO is created by an idoc that comes from a legacy system using BAPI CALL FUNCTION 'BAPI_POSRVAPS_SAVEMULTI3'.
Business Requirement:
I have a business requirement where I need to populate an additional data 'Original delivery date' from the idoc during PR creation in Product view.
Development:
To achieve the above requirement, we are following the below procedure in our development system.
1. We are using enhancement: /SAPAPO/RRP_IO_COL, method: RRP_USEX_COLS_FILL_01 and RRP_USEX_COLS_GET_TEXT_01 to display an additional field 'Original delivery date' in /sapapo/rrp3 - elements view. This field is restricted to Purchase requisition (Order category: AG) only. We are planning to populate the additional data 'Original delivery date' in this customer specific field and store it in table: /SAPAPO/ORDFLDS at the time of PR creation.
2. Table: /SAPAPO/ORDFLDS is appended with the 'customer specific field'.
3. We couldnt find a document on how the data can be populated in table /SAPAPO/ORDFLDS.
4. How to polulate the live cache data in the table '/APAPO/ORDFLDS' ? ( i.e using connection parameter )?
Appreciate if you can throw me some light on this.
Thanks
Vignesh M

Hi Vignesh,
ANy luck on this ? I am trying the almost same thing...and stuck at same point.
Please let us know if you have any more information.

How to use customer-specific fields with FI-CA event 940?

The following text can be found under FI-CA event 940:
You can also set customer-specific fields if you have defined the predefined include for customer enhancements CI_FKK_ACCIT_CUS in the structure FKK_ACCIT_CUS. The fields included here must have the same field name as the fields included in the structure ACCIT. These can also originate from an enhancement of the coding block in General Ledger Accounting. The fields Reservation Class and Reservation Key of the reconciliation key and the totals record are available as import parameters.
My requirement is to populate the field HZUON in this event, which will be called when running t-code FPG1 (Transfer of FI-CA total records to general ledger)
The problem is the fact that the output of the event (i.e. output of function module FKK_SAMPLE_0940 at first) only have the following fields:
E_ZUONR     LIKE     ACCIT-ZUONR     Zuordnung (BSEG-ZUONR)
E_XREF2     LIKE     ACCIT-XREF2     Referenz (BSEG-XREF2)
E_SGTXT     LIKE     ACCIT-SGTXT     Positionstext
E_BUPLA     LIKE     ACCIT-BUPLA     Businnes Place (Korea only)
I tried adding a new field to structure CI_FKK_ACCIT_CUS and adding this field to the output of the event 940, but how do I ensure that the content of the field will be used to populate the HZUON field of the FI document during "transfer of FI-CA total records to general ledger"?
Cheers,
Teo

Hi Teo,
I happened to see this post from you when I searched for a similar scenario related to event 940. I also need to add two fields in CI_FKK_ACCIT_CUS and make these fields as outputof the event. Did you come across any solution for the same? If so, can you please share.
Regards,
Harikumar. S
Edited by: Harikumar Sasidharan on Dec 30, 2009 12:14 PM

How to create customer specific InfoTypes in CRM?

Hi folks,
we want to distribute customer specific InfoTypes from HR to CRM. Thus we have to create these InfoTypes in CRM. Does anyone know how to do so? In HR this is done with TA PM01 which does not exist in CRM.
Thanks!
Martin

Martin,
Yes I think just using a BADI and storing in custom tables is the easiest approach in your case. However if these infotypes are employee data contained in personnel administration, then you should consider extending the Business Partner via the eewb. You would still then enhance the IDOC and then extend the data transfer to the new attributes in CRM.
If it is just organizational data attributes, then you can either do custom tables, or try to create new infotypes via manual configuration in the CRM system.
Take care,
Stephen

How to create customer specific BEx3.5 workbook using BEx7.00??

Dear guys,
we are faced with the following situation:
Customer uses MS Office2003 and BI-AddOn7.x (Patch 3). We have to provide him workbooks but we use Office 2010 and BI-AddOn7.x (Patch 3). If we now provide the workbook our customer cannot open the workbook.
Trying to save the workbook locally as XLS-file works but to open it on customer side fails.
Although the general workbook setting "use XLS format" was activated there seems to be a check what Office-version was used to create the workbook.
Is there any trick?
Regards,
Peter

Hi Frederic
yes indeed I tried this option. But w/o any effect. We committed that creation of workbook would better be done in his own environment saving time.
Thanks for your help.
Regards,
Peter

Customer specific field.........

hi,
1- How can i create customer specific fields for PROJ DEF. & WBS.
2- how it will come on the PS WBS or Proj. Def. Screen

Hi,
You can create Customer Specifc field through Enhancement of Configuration. You need to go to transaction CMOD & define the enhancement. ABAPer will be required for this purpose.
Hope this will help you.
Regards,
Rakesh Pradhan

PA - Creating customer specific infotypes

Hello experts,
How to create customer specific infotype in PA? i tried creating in PM01, but it is not getting reflected in PA30. is there any other method to create customer specific infotype? or do i have to copy from standard infotypes? If you can send me any document it will be really helpfull. my email id is [email protected]
Thanks and Regards,
Shilpa

Hi
would you mind forwarding the documents to me as well
my mail id is [email protected]
Thanks in advance
Regards,
RK

Report Painter: How to add new(customer specific) field to CCSS table

Dear Experts,
We have requirement to display the orders based on Profit center or Profit center groups in report painter. So in report library(6O1), we want to add fieild PRCTR or any customer specific field(ZPRCTR) to CCSS table. Could you please let us know how to add field ?
or is possible to add customer specific field(ZPRCTR) in CCSS and link that field to Profit Cetner(PRCTR) and profit center group.
Please help us..
Thanks in advance

You can check the below OSS notes:-
<https://service.sap.com/sap/support/notes/929889>
<https://service.sap.com/sap/support/notes/522581>
<https://service.sap.com/sap/support/notes/43493>
Regards,
Gaurav

How to create a new field in a sub screen in material master. ?

How to create a new field in a sub screen in material master. ?
Kindly help us.
LIke wise tell me how to create a new sub screen as per my desired

Follow the documentation of Logistics - General->Material Master->Configuring the Material Master->Create Program for Customized Subscreens to add the new field in material master.
Create Program for Customized Subscreens
In this IMG activity, you can create a function group of your own by copying function group MGD1 (for industry) or function group MGD2 (for retail). The subscreens are not copied, except for two subscreens which are copied for technical reasons. You can use this copy to create subscreens of your own which you can assign to a data screen in the activity Define Structure of Data Screens for Each Screen Sequence.
Requirements
Be sure to read the program documentation first.
Activities
1. Create a function group of your own by choosing Execute.
2. Enter a name containing up to 25 characters, beginning with the letter Y or Z, and choose Save.
3. Access the Object Navigator.
You do this from the SAP standard menu by choosing Tools -> ABAP Workbench, and then Object Navigator.
4. Display either program SAPLMGD1 (industry) or SAPLMGD2 (retail) as required.
5. Copy the subscreens as required, ensuring that they already contain as many as possible of the field names you want to use in your function group. You do this as follows:
a) Choose Screens, position the cursor on the corresponding subscreen, and choose Copy in the context menu.
b) Enter the program to which you want to copy the subscreen, prefixing it with SAPL, and enter a screen number. Use the screen number of the original subscreen where possible. If the F1 help is specific to a particular subscreen, this ensures that this context-specific help continues to be displayed.
Example
You have called your function group YENTERPRISE, to which you want to copy subscreen SAPLMGD1 2301. Enter SAPLYENTERPRISE as the program to which the subscreen is to be copied, and enter (preferably) 2301 as the screen number.
6. Return to the initial screen of the Object Navigator and display your program. In the example above, you would enter SAPLYENTERPRISE.
7. Choose Update object list.
8. Select the subscreen you have copied and activate it by choosing Activate in the context menu.
Using the Screen Painter, you can remove fields you do not require on the subscreen or include additional fields from other subscreens (see the ABAP Dictionary). For information on the Screen Painter, see the SAP library documentation BC ABAP Workbench Tools.
Points to consider when removing or adding fields
Make sure that a field statement exists for each field on the subscreen since data may not otherwise be transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
For the fields you have added, include any check modules and modules for self-programmed F4 help that are called up for these fields on the original subscreen. You can do this by displaying the flow logic for the original subscreen and searching for such modules. They normally have the same names as the fields themselves. When you find a module, copy the corresponding module call to your subscreen.
If you change the order in which fields are transported that are checked together in the flow logic (such as the safety stock and minimum safety stock), you must deactivate the check module for the first field and activate it for the second. The system would otherwise transport the first field, and carry out the check before the second field is transported.
Any error messages that fields are unknown when activating the subscreen are due to the fields still being included in checks, even though you have removed the fields from the subscreen. Search for the fields in the source code and make the lines in which they appear comment lines. Then reactivate the screen.
9. Assign the subscreen to a data screen as required.
Note on transport
Use the Workbench Organizer to transport the copy you have created.
Proceed

How to get customer-specific objects into PCUI ?

Hello,
we want to get an Z-table as tab page of the business partner-application into PCUI. It should 'only' be possible to create new entries - today there is no need to modify or delete records.
Does there exist something like a "cookbook" on this task or has anyone of you experience how to get customer-specific objects (without using EEWB) into PCUI ?
Thanks in advance
Martin

Option 1:
If you are good in ABAP.
You can add new tab in which create a new Field group. Assign it to a model access clas in which handle the table update.You can get the details in PCUI cookbook itsel.
Option 2:
If you are good at java
Develop an FM to update the table.
Call the FM from webdynpro
Include this webdynpro as HTML viewer in PCUI.
Regards,
Abdul Raheem S

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

Issue in Updating Customer specific fields in WBS using BAPI_BUS2054_CREATE_MULTI

Hi Experts,
I am able to create the WBS element using BAPI_BUS2054_CREATE_MULTI.But the issue is i am not able to update customer specific fields even after passing the fields as per specification in Function module documentation. I have also created an implementation of BADI as per below specification in FM documentation:
Procedure for Filling Standard Enhancements
Before you call the BAPI for each object that is to be created or changed,
for which you want to enter customer-specific table enhancement fields, add a
data record to the container ExtensionIn:
STRUCTURE: Name of the corresponding help structure
VALUEPART1: Key of the object + start of the data part
VALUEPART2-4: If required, the continuation of the data part
VALUPART1 to VALUPART4 are therefore filled consecutively, first with the
keys that identify the table rows and then with the values of the
customer-specific fields. By structuring the container in this way, it is
possible to transfer its content with one MOVE command to the structure of the
BAPI table extension.
Note that when objects are changed, all fields of the enhancements are
overwritten (as opposed to the standard fields, where only those fields for
which the respective update indicator is set are changed). Therefore, even if
you only want to change one field, all the fields that you transfer in
ExtensionIn must be filled.
Checks and Further Processing
Using the methods ...CREATE_EXIT1 or. ...CHANGE_EXIT1 of the BAdI
BAPIEXT_BUS2001, BAPIEXT_BUS2002, and BAPIEXT_BUS2054, you can check the entered
values (and/or carry out other checks).
In the BAdI's second method, you can program that the data transferred to the
BAPI is processed further (if you only want to transfer the fields of the CI
includes, no more action is required here).
But still i am unable to update fields though i am able to create WBS with rest of the fields except custom fields.
I am using attached code to achieve this.Do we need to code anything inside method create_exit1 or create_exit2 implementation for BADI or
Please help on priority

Hi Rahul,
First observation from your code is that i could not find the assignment for the field
GWA_WBS_EXTIN-STRUCTURE. I hope you are not filling this field, that could be one reason for failure. Try to do it and let us know if you still have the problem.
Br..
Dwaraka

How we create custom infotype and how to configure with its subtypes.

hai abap-hr gurus,
how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
plz help me for this with an example code.
thanks..
kiran kumar

Hi Kiran,
Please fallow the below steps to create the custom infotype. If you have any quires let me know.
For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
then select the `Employee Infotype' radio button
after that select the `PS Structure Infotype'
then click on Create A separate table maintenance window appears
then Create a PS structure with all the fields you want on the infotype
Save and Activate the PS structure
now Go back to the initial screen of PM01
Click on `All' push button. It takes a few moments
Click on `Technical Characteristics. Infotype list screen appears
Click on `Change'(pencil) button
Now select your Infotype and click on `Detail' (magnifying glass) button
Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
Give your subtype field as subtype field & Save and come back to PM01 initial screen
Click on `Infotype Characteristics' Infotype list screen appears
Click on `Change' (pencil) button & on New Entries
and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
to fill yours). Now save ur entries
Now the Infotype is created and ready to use.
If you want to change the layout of the Infotype as per your
requirement
In the PM01 initial screenSelect `Screen' radio button and give
2000 as the screen name, then click on edit.
In the next screen.. Select `Layout Editor' and click `Change'.
Screen default layout appearshere you can design/modify the
screen..change the attributes of the fields..etc.
Save and activate. (Don't forget to `Activate at every level)
Regards,
Ramakrishna kotha.

Customer specific field table T77OMATTR

Hi guys.
SRM 4.0, server 5.0.
I have added an attribute to use in the PPOMA. My attribute is for the tax jurisdiction code, besides this extra attribute I have added a customer specific field to the SC. But which function modules should I use to fill the customer field with my attribute, any ideas? I would believe that everytime you enter a new attribute in the table, you would also have to do some coding before it can work, right?
Thanks
Dennis M

Hi
Here are some related links ->
Re: Creation of Custom Attributes in org structure
R/3 to SRM
Creating a new custom attributes in org structure
First take a look at this forum post regarding your questions - the thread has relevant info for you:
FM for attribute's value assignation in PPOMA ?
Regarding your specific queries:
Can you automate replication?
Yes - it can be automated. Post processing BADIs exist in the IDOC to allow you to perform your actions.
What are the tables?
Well not that you are ever to directly read or update these tables, but they are HR info type tables. Examples would be HRP1222, HRP1000, etc. If you really want to the table that has the attribute value see table HRT1222. Again look only - never develop a program to read/update these tables.
As mentioned in the forum thread above use the function modules BBP_READ_ATTRIBUTES/BBP_UPDATE_ATTRIBUTES.
Do let me know, incase you need more details.
Regards
- Atul

How to create a new field

how to create a new field form se 38 and update it to the customized table in the se11. I have done modification insertion deletion and update of field values in se 38 and has updated to the table in se 11. I want to know how to create a table from se38 and update it to the table in se11.I dont know whether it is possible. Enlight me.
with regards,
SREERAM M

Hi:
have a look
[Link1|http://www.wiziq.com/tutorial/17782-SAP-BDC-File-Handling]
[Link2|http://www.sap-img.com/abap/learning-bdc-programming.htm]
Regards
Shashi

How to create customer specific fields within PC 10.0?

Similar Messages

Maybe you are looking for