How to create Dynamic field so it appears the file name
Hi,
I was wondering if anyone knows how to create a dynamic text field so it automatically appears the file name created of the document.
thanks alot !!!
Jack
[email protected]
Hi, Seems we can't upload examples anymore, but here is a screen shot of what I meant.
Hope it helps
Similar Messages
-
How to get dynamic fields to spread to the next page?
Thanks to a couple of wonderful folks on this board. I have found a way to get my dynamic field to move and I have gotten the static text fields below that to move. Now I have another problem. As my dynamic field has expanded towards the end of the page. The static fields ahead of it have disappeared. I know that there is a setting to have the static fields move to the next page. Or is there a way to do it? I would love some help on this.
Thanks in advanceI had this issue. I had to wrap the static fields below in a sub form and change the settings on that sub form to flow with content like I did with the original text box. This will push the static forms to the next page on the form, but there is one problem with this that I haven't gotten around. When the text box spans multiple pages, printing the page will not print all of the text. For example. A text box where 45 lines of text are entered, 20 are on the first page, 25 are on the second page. It will display properly, but when printed the text that prints on page 2 will be the same text you see on page one. If I wasn't clear enough on moving the static fields, let me know. I can give you the steps. Hopefully the printing thing won't cause you grief.
-
How to add page count of PDF to the file name?
I need help with an applescript that can look at a pdf, determine the page count in file and then add that value to the end of the file name in front of the .pdf
ex.
original name "map with pages4c.pdf"
renamed "map with pages4c_48.pdf"
Any help would be appreciated or suggestions on how this could be done.
Thanks,
JohnHello
That's quite simple.
Just replace this chunk of code -
tell application "Finder"
set n to f's name
set f's name to (n's text 1 thru -5) & "_" & p & ".pdf"
end tell
with -
if 10 > p then set p to "0" & p
tell application "Finder"
set n to f's name
set f's name to (n's text 1 thru -5) & "_" & p & ".pdf"
end tell
By the way, if there are 10000 files in directory tree, I'm afraid Finder is too slow to get files list. In order to avoid Apple Events timeout error, at least, replace this line -
tell o to run
with -
with timeout of 3600 seconds
tell o to run
end timeout
Or try the following script, which employs find(1) instead of Finder to get files list.
All the best,
Hiroto
--SCRIPT3
on run
--main((choose folder with multiple selections allowed) as list)
main((choose folder) as list)
end run
on open aa
main(aa)
end open
on main(aa)
(* list aa : list of folder aliases *)
script o
property ff : {}
-- confirmation for safety
set AppleScript's text item delimiters to {ASCII character 0}
set aa to (aa as Unicode text)'s text items
set AppleScript's text item delimiters to {""}
set aa to (choose from list aa default items aa ¬
with prompt ("You're renaming pdf files in following folder tree(s).") ¬
with multiple selections allowed)
if aa = false then error number -128
-- process each folder
set k to 0
repeat with a in aa
set a to a as alias
-- get pdf files' POSIX path list (= ff)
set ff to {}
set sh to "find " & quoted form of POSIX path of a & " -type f -name \"*.pdf\" -print"
try
set t to (do shell script sh)
on error
set t to ""
end try
set px to count t's paragraphs
set p0 to 1
repeat -- in order to avoid stack overflow in getting large number of paragraphs at once
set p1 to p0 + 3500
if p1 ≥ px then set p1 to -1
set ff to my ff & t's paragraphs p0 thru p1
if p1 = -1 then exit repeat
set p0 to p1 + 1
end repeat
if ff = {""} then set ff to {}
-- process each pdf file
repeat with f in my ff
set f to f as POSIX file as alias
tell application "Adobe Acrobat 7.0 Professional"
--open f
open f with invisible
tell document 1
set p to count pages
close
end tell
end tell
if 10 > p then set p to "0" & p
tell application "Finder"
set n to f's name
set f's name to (n's text 1 thru -5) & "_" & p & ".pdf"
end tell
set k to k + 1
end repeat
end repeat
-- decent notice
tell application (path to frontmost application as string)
display dialog ("Total of " & k & " pdf file(s) renamed successfully.") ¬
with icon 1 giving up after 5
end tell
end script
with timeout of 3600 seconds -- just in case
tell o to run
end timeout
end main
--END OF SCRIPT3
Message was edited by: Hiroto (fixed typos) -
Looping multiple excel files at a time in ssis and create a new column to insert the files names
Hi Friend,
i have one requirement.
I got around 200 excel files with date as file name like 120101.xls, 120102.xls (YYMMDD).
I am able to loop all the files and insert data but i am unable to load the files names using ssis.
Please can any one help to fix this using script task or any other code..
It is very urgentThank You Vaibhav,
I want to insert the file name along with the other columns of data from excel.
like this deriving a new column FILE_NAME
Your ForEach Loop task must be returning the entire file path, I suppose.
1. Get the file name from your file path.
New variable: FileName
Expression : RIGHT(@[User::FilePath],FINDSTRING(REVERSE(@[User::FilePath]),"\\",1)-1)
2. Inside Data flow, after Excel source use Dervied Column and use above @FileName
3. At your OLEDB destinition, use MyFileName.
-Vaibhav Chaudhari -
FTP how to pass dynamic filename/directory location - reading a file in 11g
Hi All,
We r using FTP adapter(SOA 11g) for getting files in remote server, May i know how to pass dynamic filename and directory where the file exists for reading in server.
Thanks,
RakHey according to my understanding, the Dynamic partner links are set only for the Outbound invocations only. Is my understanding right? if so, how do we create the dynamic partnerlinks for the ftp get kind of stuff...??
Thanks in advance -
Selecting a list of files and creating a list of only the file names?
Hopefully this is an easy question, one that I can't seem to figure out. I have a folder of photos and I would like to select all their file names and create a text list of just the file names. Every time I try I select the photos themselves and when pasted into my text document all of a sudden I have a lot of images. Any advice on how to do this? Thanks Jeff
You're part way there. Do this in TextEdit. Open a new document, CMDSHIFTT to put it into plain text format, paste in the contents of your photo folder, and be surprised when only the names get pasted and not the images. If you want them in alphabetical order, change the photo folders view to list and click on the name column before copying.
-
How to create dynamic ed flash charts based on user selected fields in Orac
Hi all,
Can any of the experts please tellme "how to create dynamic ed flash charts based on user selected fields in Oracle apex".
Thanks
ManishHello,
Lots of different ways to do this, I blogged about one way (using a Pipelined function) here -
http://jes.blogs.shellprompt.net/2006/05/25/generic-charting-in-application-express/
Other options include using a PL/SQL function returning the string to use as the dynamic query etc.
Hope this helps,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone! -
How we create dynamic add form field in web form
How we create dynamic add form field in web form?
Hi,
Thanks for reply.
I need to create a form in which "add more" input field dynamically. For
example sometime we need field on or more. Please look at the demo, I need
to create form as per demo in business catalyst:
http://www.openjs.com/scripts/examples/addfield.php -
How to create dynamic context based on a structure defined in the program?
Hi Experts,
I need to create a dynamic context based on a structure wa_struc which i have define programatically.
When I pass wa_struc to structure_name parameter of create_nodeinfo_from_struc, i get a runtime error:
"Parameter STRUCTURE_NAME contains an invalid value wa_struc."
How to create dynamic context based on a structure defined in the program?
I have written the code like this:
TYPES: BEGIN OF t_type,
v_carrid TYPE sflight-carrid,
v_connid TYPE sflight-connid,
END OF t_type.
Data: i_struc type table of t_type,
wa_struc type t_type.
data: dyn_node type ref to if_wd_context_node.
data: rootnode_info type ref to if_wd_context_node_info.
rootnode_info = wd_context->get_node_info( ).
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
cl_wd_dynamic_tool=>create_nodeinfo_from_struct(
parent_info = rootnode_info
node_name = 'dynflight'
structure_name = 'wa_struc'
is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( name = 'dynflight' ).
dyn_node->bind_table( i_struc ).
Thanks
Gopal
Message was edited by: gopalkrishna baligaHi Michelle,
First of all Special thanks for your informative answers to my other forum questions. I really appreciate your help.
Coming back to this question I am still waiting for an answer. Please help. Note that my structure is not in a dictionary.
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
I have updated my code like the following and I am getting error:
TYPES: BEGIN OF t_type,
CARRID TYPE sflight-carrid,
CONNID TYPE sflight-connid,
END OF t_type.
Data: i_struc type table of t_type,
dyn_node type ref to if_wd_context_node,
rootnode_info type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
wa_node_att-name = 'CARRID'.
wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
insert wa_node_att into table i_node_att.
wa_node_att-name = 'CONNID'.
wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
attributes = i_node_att
is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
But now I am getting the following error :
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
-Gopal
Message was edited by: gopalkrishna baliga -
How to create dynamic view in hr report category
i want to make company code mandetory in in selection screen given by logical data base PNP here i want to make field mandetory. so how to create dynamic view in hr report category.
thanks in advancesolved by self
-
How to create dynamic screen using module pool programming
Hi,
Could anybody help me how to create dynamic screens?
I am developing a screen with HR Person with assignment info. If PERNR have multiple assignments, i need to show all the details one by one. How to show the details on screen. I need to call one by one assignment information dynamically.
Please suggest me how to do, apart from using table controls.
Thanks,
KamalYou may have the below options:
1) Table Control
2) Individual fields
3) ALV
4) pop-up screen -
How to create dynamic window in smartform
<i>HI Floks</i>
my requirement is invoice smartform having few line items .i can print this line items with different categories with dynamically placed in smartfom. there how many items with in particular category print its self . how is it possible to printing .is it possible to print dynamic fields and window without changing driver program and structure .How to create dynamic window.
any body knows reply me fast
thanks in advance ,
sureshHi suresh,
You can create all the windows, but if you go to specific window you will see different tabs like general attributes, output options and conditions. In that conditions tab, you can give condition. so based on that condition, that window will be printed.
Dont forget to reward points if helpful.
regards,
Chandra. -
How to create dynamic strcture and accepting runtime value in work area
Hi,
I am using RFC_READ_TABLE for joining more than table and written select query but into clause work area value is passed but it is short dump is displaying with too few many fields in into clause .work area WA need some casting type conversion which accepts the some run time value and should have some structure for it.how to create dynamic structure?hi
good
go through this and use in your report accordingly.
If you are trying to read some information from SAP and you can't find the right BAPI then RFC_READ_TABLE can do the job for you.
RFC_READ_TABLE is powerful RFC it gives you the access to all tables and views in SAP. I basically used RFC_READ_TABLE for Material Master Search application on the Intranet.
Now you may say there are lots of BAPI for this functionality. You are right but I had to work around the BAPI to get Prices (Moving Average Price) and it just did not work very well. Because of the nature of the application I had to use RFC_READ_TABLE because then I can use powerful SQL expression for searching. RFC_READ_TABLE give you the ability to code the where clause which is quite enough.
I have included part of the code use in asp page to read ENT1027 for Mgroup and M description & number but without object creation. The other part of the code reads MBEW for price & quantity.
Code
lt;%
'#######################Diming the Structures
Call BAPIRFC.DimAs("Rfc_Read_Table", "FIELDS", MaterialSelection_RS)
Call BAPIRFC.DimAs("Rfc_Read_Table", "OPTIONS", Selection_RS)
'########################Search Type########################
' C contanis
' S Start with
' E Ends with
if searchtype = "C" then
FormatedSearch_Keyword = "%" & Search_Keyword & "%"
elseif searchtype = "S" then
FormatedSearch_Keyword = Search_Keyword & "%"
else searchtype = "E" then
FormatedSearch_Keyword = "%" & Search_Keyword
end if
'################# Flaged for deletion Materials #####################
if showdeleted = "No" then
Selection_RS.AddNew Array("TEXT"),Array("LVORM <> 'X' AND")
end if
'############## users can search three material group ################
'############## GROUPS: OFFICESUP TECOMHARD TECOMSOFT ###############
'##USER STILL CAN NAROW THEIR SEARCH BY SELECTING ON OF THREE#########
if MGroup = "ALL" then
Selection_RS.AddNew Array("TEXT"),Array("MATKL IN ('OFFICESUP','TECOMHARD','TECOMSOFT')")
else
Selection_RS.AddNew Array("TEXT"),Array("MATKL = '"& MGroup &"' and ")
end if
'#######################ADDING SEARCH KEYWORD TO STRUCTURE##############
if not Search_Keyword = "" then
Selection_RS.AddNew Array("TEXT"),Array(" MAKTG LIKE '" & FormatedSearch_Keyword & "'")
end if
Selection_RS.Update
'#######################ADD RETURNED FIELDS#########################
MaterialSelection_RS.AddNew array("FIELDNAME","OFFSET","LENGTH","TYPE","FIELDTEXT"),array("MATNR","000000","000000" ,"","")
MaterialSelection_RS.AddNew array("FIELDNAME","OFFSET","LENGTH","TYPE","FIELDTEXT"),array("MATKL","000000","000000" ,"","")
MaterialSelection_RS.AddNew array("FIELDNAME","OFFSET","LENGTH","TYPE","FIELDTEXT"),array("MAKTG","000000","000000" ,"","")
MaterialSelection_RS.Update
call BAPIRFC.Rfc_Read_Table("ENT1027", Material_RS, MaterialSelection_RS, Selection_RS, "~", "", "0", "0")
If Err.Number > 0 then
Response.Write "Error:" & "<BR>"
Response.Write " Err.number...... " & Err.Number & "<BR>"
Response.Write " Err.Description. " & Err.Description & "<BR>"
end if
'###########LOOP THROUGH RECORDSET
if not Material_RS is nothing then
do while not Material_RS.eof
loop
end if
%>
thanks
mrutyun^ -
Salmple at How to Create Dynamical Object for RTTC
Hi all, I need a sample at How to Create Dynamical Object for RTTC.
you can help me?.Hello Martinez,
I have attached a sample for structure types. With the Where-Used-List on the Create() Method of the various RTTC classes one may find more samples. If you meant with object on OO Type then it is to mention that this is not possible yet.
Regards
Klaus
PROGRAM sample.
DATA: sdescr1 TYPE REF TO cl_abap_structdescr,
sdescr2 TYPE REF TO cl_abap_structdescr,
tdescr1 TYPE REF TO cl_abap_tabledescr,
tdescr2 TYPE REF TO cl_abap_tabledescr,
tref1 TYPE REF TO data,
tref2 TYPE REF TO data,
comp TYPE abap_component_tab,
wa TYPE t100,
xbuf TYPE xstring.
FIELD-SYMBOLS: <tab1> TYPE table,
<tab2> TYPE table.
sdescr1 ?= cl_abap_typedescr=>describe_by_name( 'T100' ).
comp = sdescr1->get_components( ).
sdescr2 = cl_abap_structdescr=>create( comp ).
tdescr1 = cl_abap_tabledescr=>create( sdescr2 ).
tdescr2 = cl_abap_tabledescr=>create( sdescr2 ).
CREATE DATA: tref1 TYPE HANDLE tdescr1,
tref2 TYPE HANDLE tdescr2.
ASSIGN: tref1->* TO <tab1>,
tref2->* TO <tab2>.
wa-sprsl = 'E'. wa-arbgb = 'SY'. wa-msgnr = '123'. wa-text = 'first text'. INSERT wa INTO TABLE <tab1>.
wa-sprsl = 'D'. wa-arbgb = 'SY'. wa-msgnr = '456'. wa-text = 'second text'. INSERT wa INTO TABLE <tab1>.
wa-sprsl = 'D'. wa-arbgb = 'XY'. wa-msgnr = '001'. wa-text = 'third text'. INSERT wa INTO TABLE <tab1>.
wa-sprsl = 'D'. wa-arbgb = 'ZZ'. wa-msgnr = '123'. wa-text = 'fourth text'. INSERT wa INTO TABLE <tab1>.
wa-sprsl = 'E'. wa-arbgb = 'SY'. wa-msgnr = '123'. wa-text = 'ABAP is a miracle'. INSERT wa INTO TABLE <tab1>.
EXPORT tab = <tab1> TO DATA BUFFER xbuf.
IMPORT tab = <tab2> FROM DATA BUFFER xbuf.
LOOP AT <tab2> INTO wa.
WRITE: / wa-sprsl, wa-arbgb, wa-msgnr, wa-text.
ENDLOOP. -
How to create Dynamic Webi 3.1 filename in Publication
I have a webi 3.1 report that is being called from a publication used for bursting using the eFashion universe. I want the file name to be dynamic, based on the profile. Within the webi report I created a free standing cell that I set to "Western States" or "Eastern States" based on the states in the report at the time of the run (set by the profile). This works correctly. But there does not seem to be a way to get the report to use the free standing cell value as part of the report name. From the publication, properties, destinations, use specific name I can only pick title and document name. Neither of these is the free standing cell in the report. I saw that version 4.0 has this ability but I can't upgrade for another year and deski is not an option. Any suggestions? Thank you.
I figured out how to create dynamic report names with 2 fields within the Publication tool. I padded fullname and email in dynamic recipients to be the two fields I wanted from the report. Then in Destinations, File Name:, Use specific name I picked userfullname and email address to create the report name. But that would not work if I actually needed to use the email address to send the report to. We don't have Java programmers and may have to find other options. Thanks.
Maybe you are looking for
-
WNA between AD 2008 R2 and infratier 10.1.2
Hi! I know that my configuration isn' supported and oracle says just it may work... :-) Bootstrapping and synchronizing the users from AD to OID works well. But windows native authentication (WNA) doesn't work. I followed the following document for c
-
I went on the road for a week (while I'm on the road PHDs don't sync) and when I returned and tried to sync my changes I'm getting all sorts of errors. Some errors seem to have cleared themselves up after several sync (which is bothering in and of it
-
Viewing iphone pictures on Win 7
I backed up pictures from an iphone 4 and 4S to a CD, because I ran out of phone space. I tried to view those photos on my Windows 7 desktop, but it says it can't open them. How do I see what I backed up? Thank you
-
Pics are low resolution?
Transferred some photos from my Nikon D700 to iPad. Photos are raw on camera so I'm not sure if "Photos" IOS app converts to jpg or what? But my real question is that I then import those photos into a iMovie project that I'm working on on my iPad, an
-
Hi, Please could someone help me to find and correct the error in the VI. I am using a USb webcam to measure the intensity of light in a ROI then record a short video. Unfortunately, I receive sometimes an error of timeout. I think the labview is con