Selecting a list of files and creating a list of only the file names?
Hopefully this is an easy question, one that I can't seem to figure out. I have a folder of photos and I would like to select all their file names and create a text list of just the file names. Every time I try I select the photos themselves and when pasted into my text document all of a sudden I have a lot of images. Any advice on how to do this? Thanks Jeff
You're part way there. Do this in TextEdit. Open a new document, CMDSHIFTT to put it into plain text format, paste in the contents of your photo folder, and be surprised when only the names get pasted and not the images. If you want them in alphabetical order, change the photo folders view to list and click on the name column before copying.
Similar Messages
-
I am trying to e-mail a graphics pages document I made as a PDF file. After trying to resize the file, the photo's quality is compromised (really blurry) even after choosing "Best" quality. What am I doing wrong. As a regular full sized file (PDF) it's fine, but when it gets reduced, it's bad and it needs to get printed from the e-mail copy I'm trying to send. HELP! Please.
If there are a lot and/or large images the file will inevitably be large, no matter what.
You can reduce them down as far as possible by cropping and scaling them to the final size before creating the pdf. You can do this by opening the images in Preview .app and using Menu > Tools to reduce the resolution and to crop.
If you have used transparency effects eg shadow, reflection, transparency, 3D charts, OSX will by default render these at 72dpi in the pdf.
Peter -
Applescript to open various files and add info from filename to the file
Hi guys,
first time using this forum...
and first time trying to do a script for apple...
I figured out how to do simple things... like open files and stuff to text files... but don't know where to begin:
I have a directory datalogs...
within the directory i have multiple text files that have the following format:
dataXXYYY_Waf2_7_19_11.csv
dataXXYYY_Waf3_7_19_13.csv
dataXXYYY_Waf25_7_19_16.csv
typically 25 files, but sometimes less
I would like to be able to take each file within the datalogs folder ...
Scan the file name and look for the number afer Waf
The number can be anywhere from (single digit) 1 to 25
I would like to take that value after Waf and then append a line in the txt file
the line I would have to add will be 5 rows down and it shoulld say:
wafer,1
the 1 above is the value that was in the file name....
i.e.
for the file
dataXXYYY_Waf25_7_19_16.csv
before append the file contains random data ... i.e.
dummyline1
dummyline2
dummyline3
dummyline4
dummyline5
dummyline6
Then after the script...
the file will be saved with same name:
dataXXYYY_Waf25_7_19_16.csv
and the data should look like:
dummyline1
dummyline2
dummyline3
dummyline4
wafer,25
dummyline5
dummyline6
any help will be appreciated
-thanksCopy your source folder - named 'datalogs' to your home directory and run this script by copying into a new AppleScript Editor document and pressing Run.
I think I've followed your specification, and there will be other ways to do this, but ask if you have questions. (I have put comments in the code which should explain some of it!)
There is no error checking, but I have made copies of the original files in the source directory. (You can comment out the line "duplicate theFile" by prefixing with "--" when you are sure it's working.
As always, ensure your data is backed-up before proceeding.
--starts here
--sets path to datalogs folder
set theDirectory to (path to home folder as text) & "datalogs"
set fileNames to {}
tell application "Finder"
--gets all the files in the source directory
set fileList to files of folder theDirectory
--iterates through the files
repeat with theFile in fileList
--makes a duplicate
duplicate theFile
--puts the fileName and fileLocation into records in a list of lists
set end of fileNames to {fileName:name of theFile, fileLoc:theFile as alias}
end repeat
--iterates thru the files
repeat with theFile in fileNames
--gets offset of the string "Waf"
set WafOffset to offset of "Waf" in (fileName of theFile)
--trims the name so that it now starts with the character after "Waf"
set fileName to text (WafOffset + 3) thru end of fileName of theFile
--gets offset of the next underscore
set UScoreOffset to offset of "_" in fileName
--stores the desired number by trimming off the end of the file name
set fileNumber to text 1 thru (UScoreOffset - 1) of fileName
--sets up the text to insert by prefixing with "Wafer," and suffixing with return
set insertText to "Wafer," & fileNumber & character id 10
--opens the file with write permission
set FileRef to open for access (fileLoc of theFile) with write permission
--initialise container
set fileContents to ""
--puts first five lines into container
repeat 5 times
set fileContents to fileContents & (read FileRef until character id 10)
end repeat
--adds the new text to the container
set fileContents to fileContents & insertText
--adds the rest of the file to the container
set fileContents to fileContents & (read FileRef)
--effectively empties the file
set eof FileRef to 0
--writes contents of the container to the file
write fileContents to FileRef
--closes the file
close access FileRef
end repeat
end tell
--ends here -
Greetings,
I am new to powershell and scripting and would like to create a powershell script to do the following to XML files.
I would like to change the data received in XML files that contains special Nordic characters: such as
ä, Ä, é, ö, Ö, ü, Ü, and ß respectfully.
The file names that gets drop to me come in with the following naming convention: C54ABC_111120140500_1, C54ABC_111120140500_2, C54ABC_111120140500_3, C54ABC_111120140500_4 all the way to C54ABC_111120140500_12.
By automating the script, I would like the script to look into a directory containing these files and access the data within it and change the the data that has the special characters to the English Dictionary character equivalent.
e.g. ä for a, Ä for A, é for e, ö for o, Ö for O, ü for u, Ü for U, and ß for ss.
Once that step is complete. I would like to rename the file from C54ABC_111120140500_1.xml to C54ABC_111120140500_1_rctf.xml (adding an additional 5 characters to the end of a file that was corrected) if the file did not need any correction then renaming is
not needed.
the working directory (Source and destination) will remain in the same location. e.g. C:\Temp\
Currently I was able to come up with the following, however I am stuck when it comes to the renaming part since, it requires "IF and Else" statments .... I think.
$Source = "C:\Temp"
$Destination = "C:\Temp"
$regex33 = "\*.xml"
(Get-Content $regex33) |
ForEach-Object {$_ -replace "ä", "a" -replace "Ä", "A" -replace "é", "e" -replace "ö", "o" -replace "Ö", "O" -replace "ü", "u" -replace "Ü", "U" -replace "ß", "ss"}
#Rename-Item -NewName {$_.name -replace -whatif}
Your Assistance and Expertise is greatly appreciated.
Thank you in advance KC.Hi KC
You could try something like this.
Let me know how you get on and if you've any questionds.
cheers, Tim
$Source = 'C:\Temp'
Set-Location $source
$xmlFiles = Get-ChildItem -Path $source -Filter *.xml
ForEach ($xmlFile in $xmlFiles)
$content = Get-Content -Path $xmlFile.FullName
$renameFile = $false
Switch -Wildcard ($content) {
'*ä*'
$renameFile = $true
$content = $content -creplace 'ä', 'a'
'*Ä*'
$renameFile = $true
$content = $content -creplace 'Ä', 'A'
'*é*'
$renameFile = $true
$content = $content -creplace 'é', 'e'
'*ö*'
$renameFile = $true
$content = $content -creplace 'ö', 'o'
'*Ö*'
$renameFile = $true
$content = $content -creplace 'Ö', 'O'
'*ü*'
$renameFile = $true
$content = $content -creplace 'ü', 'u'
'*Ü*'
$renameFile = $true
$content = $content -creplace 'Ü', 'U'
'*ß*'
$renameFile = $true
$content = $content -creplace 'ß', 'ss'
If ($renameFile)
$newFileName = "$($xmlFile.BaseName)_rctf.xml"
$content | Out-File -FilePath $xmlFile.FullName -Force
Rename-Item -Path $xmlFile.PSChildName -NewName $newFileName -
I have a Macbook Pro with OS X Lion 10.7.2. I have sent a work file to the trash bin along with many other files. When I empty the trash this one particular file remains and I get a message that this file is still in use. I have tried returning the file to my documents, opening it, closing it and then sending it to trash and again I try to empty trash but the same message comes up - Q - How can I trash this file permanently?
First just try logging out and back in. Whatever is holding on to it may not be running after the logout thus freeing it so you can trash it after logging back in.
You might also try Trash It!
Lastly, look at the following for suggestions:
The X Lab: Solving Trash Problems -
Music and Video on Nas in folders but how do i set up itunes on multiple computers to see and use these files and create libraries?
So i have had a itunes set up on my old PC, bought a NAS and copied the folders over to the NAS, i did this incorrectly and so then even when i told the old PC to use that folder it saw all the songs but wasnt able to play the songs as it was looking in the incorrect place.
So now i want my Mac as well as my PC and others to all use the music, videos etc on the NAS they are in itunes friendly folders (as they were compiled this way by the itunes on the old PC.
When i tell the mac to use the itunes library.itl file it sees the song list (about 100gb) but cant see any songs, so i have removed this file to another location for now with the hope to set up a new file and then get it to see the songs on the folder from the NAS.
Can someone tell me how to do this for all the Mac's and PC's on my network as i really want one master library that all use and add too.
Thanks for your help in advance.I have the same question but I am using two pc's
-
Read contents of excel and create new List based on excel
HI,
I have a excel file, which is uploaded in a document library. I am using C# and VS 2010.
The excel file contains multiple sheets. I want to read the contents of the excel file and create a new List based on the contents of the excel file.
How to achieve this programmatically?
ThanksHi.
You can user OpenXML SDK to read excel Data.
http://msdn.microsoft.com/en-us/library/office/bb448854.aspx
Here an example of use.
http://zsvipullo.blogspot.it/2011/08/excel-helper-leggere-un-file-xlsx.html
Regards,
Bubu
http://zsvipullo.blogspot.it
Please mark my answer if it helped you, I would greatly appreciate it. -
I am trying to delete pages from a PDF file. I opened the bookmarks in the PDF file, selected the pages to delete and choose Edit > Delete. The selected pages are not deleted. Note: I have to open the file using a passport provided by an external party.
Resolved
-
Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?
Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt -
I installed iTunes 64 on a Windows 7 (Home) HP Pavilion and received this error message. the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Please help!
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
What is the best and most efficient way to read a .xls File and create a pipe-delimited .csv File?
Thanks in advance for your review and am hopeful for a reply.
ITBobbyP85You should have no trouble doing this in SSIS. Simply add a data flow with connection managers to an existing .xls file (excel connection manager) and a new .csv file (flat file). Add a source to the xls and destination to the csv, and set the destination
csv parameter "delay validation" to true. Use an expression to define the name of the new .csv file.
In the flat file connection manager, set the column delimiter to the pipe character. -
How can I copy part of a larger PDF file and create a smaller one?
How can I copy part of a larger PDF file and create a smaller one?
Hi,
Copy the content of PDF file in Adobe Reader and paset it to MS Word then create PDF file from the Word file.
This may not work for all PDF files as some PDF files are not created correctly or some content cannot be copied.
Acrobat XI Pro has features to extract/delete/crop pages in PDF files and you can download it from www.adobe.com(Trial version- 30 days free). Or you can upgrade your subscription to Acrobat Plus and see more information at https://www.acrobat.com/acrobatplus/en/home.html
Hisami -
XI to read the action xml file and create a SAP notification in PM
Hi All
I am new to XI world can you please help me in doing this scenario.
I have to read an XML file and create a Notification in PM module of SAP.
Step by Step help would be great.
Thanks in Advance
SaiHi Sai,
To send data from XML file to SAP (any module) there are 2 ways..
1. File to IDoc and
2. File to RFC...
first Identify the concerned BAPI or IDOC for CREATION OF
NOTIFICATION ...then do the scenarios..
for Step by stp process go through this link...
New to XI
regards,
Ansar. -
How to crop a mp3 file and create a new small one from it?
Hi all,
I would crop a long mp3 sound file and create a new small one with the short part from the long mp3 sound file. How to do it? Anybody can help me?
Thank you very much.
Regard
DavidHave you managed to do this?
I would also like to know how.
Thanks
Jeff Singer -
In Quicktime Pro I try to create a mov file and I get an error "-43 a file could not be found". Any ideas?
I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
Maybe you are looking for
-
Greetings! So here's the skinny. I have a 1st Gen Nano - have had absolutely no issues with it, or my Nike+ stuff, until a few days ago. On Saturday, the 24th, I was running, and my Nano had a total battery loss/shut down. It had been giving me (I th
-
What should I do to upgrade my PowerBook G4 15" to use Ipad
heyo! I'm currently using PowerBook G4 15" run on version 10.4.11 CPU Speed:1.5 GHz L2 Cache (per CPU):512 KB Memory:768 MB Hard drive:80gb Recently,i just won an ipad and i cant use it at all.the moment i connect it prompt, need an higher version 10
-
Question regarding a method of stocking data
I know this thread already is in the "New to Java Technology" Forum, although I said the topic was closed there so I could open it back here.. I realized it would be more fitting here and it would probably get more replies... I am working with a frie
-
I switched to Pages about one year ago because I then found that style management was easy and straightforward compared to Word. I updated to Pages V2.0 in January and since then I have been annoyed with the new way style sheets are managed. In V1.0,
-
Tried to install ios 7, now phone wont work!?
I plugged my 4s into the wall and started the ios 7 update. Last I looked it was about half done. My phone must of died during the update, and now it will not turn back on, cant do anything, wont charge, wont turn on, or plug into the computer, only