How to create Global password and user information list in Linux
Hi ,
OS is : OEL, We have some requirement, we need to create global password and Users information, that location sould be accessable to all users, can any one guide me how to do it in Linux.
Could you give us a little more details? Are u looking for something like a centralized authentication system? or....what exactly?
kido
Similar Messages
-
How to Update Picture column in User Information List?
Hi,
The user updated his profile picture in mysite about 10 days ago. The updated picture is shown on his mysite but the same is not in sync with User Information List. The 2 timer job which takes care of the profile synchronization are scheduled as below:
Profile Synchronization : hourly
Quick Profile Synchronization : every 2 minutes
And both the timer job status are shown as successful, yet the picture url is not updated.
Can anyone kindly let me know is there any way to update the same manually.
Please note that the version of SharEPoint is 2007 and Windows server 2003.
Thanks in Advance.Hi Sheetal Lomate,
It is correct to check the profile synchronization jobs to make sure profile information syncs between user profiles and user information list.
If it is still not synced, please use the following stsadm command:
stsadm –o sync –listolddatabases <x number of days>
If one or more content databases show up in this list, clean up the list, they can be added to the list again:
stsadm –o sync –deleteolddatabases <x number of days>
Related reference:
User Profiles and User Informtation list synchronization:
http://www.sharepointchick.com/archive/2009/06/17/user-profiles-and-the-user-information-list-or-userinfo-table.aspx
Thanks,
Qiao
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Qiao Wei
TechNet Community Support -
How to create secutiry filters and users, groups in system 9
HI,
Could you please help me how to create security filters and groups, users in system 9. I need it very ugent. i am very much thankful to you.. if you respond immediatly.
Thanks,
sudhakar.In short here's how I did it in 9.3.1 but there are multiple ways to do it.
I'm using MSAD external authentication.
Using EAS right click on database, Edit, Filters. Create your filters.
Then go to Shared Services.
Find the MSAD user/group and provision them to the Essbase database that you have your filters on. Access level is "Filter".
Then go back to EAS and Refresh Security From Shared Services.
Then go back to Shared Services.
Navigate to Projects & then your Essbase server. Find your Essbase database and click on it. To the right it'll populate a list of all the users/groups you provisioned to above. Select all of them and click Next.
Now you should see a drop down at the top showing your filter(s). Click the checkbox(s) next to the users/groups you want to apply that filter to. Click the green checkmark to apply the filter, and repeat for your various filters that you want to apply. Only 1 filter per user/group.
Then go back to EAS and Refresh Security From Shared Services again.
Good luck, hope this helps. -
WLST 92 - How to Create Global Role and Role Condition?
I'm currently using WLS 9.2 and trying to use WLST to create a global role and defining a role condition. Anyone know how to do so using WLST for WLS 9.2?
Trying to:
- create Global Role, testRole
- create condition where 'username = testuser'
thanks!Did you find out a solution for this?
-
How to change all passwords and user ID
I cannot sign in to iTunes, app store...I have to keep resetting password and it still tells me it's incorrect
Try here
https://appleid.apple.com -
How to Create a connection and User Seesion and Authentificate Session
Hi
I would like that someone provide my the code to set a connection with MDM through the MDM Java APIS SP6 Patch2. I need to connect with the repository, and authentificate the User and the Password. Furthermore I would need the code to pick up events like add record and modified record. When a record is added or modified is neccesary to pick up the value of a lookup field in the main table to check that this value is a specific value in order to syndicate this record. That´s possible that someone provide this code to me.
thanks in advance. If the reply is useful there will be rewards Points.Hi,
Check this out
ConnectionAccessor simpleConnection=null;
RepositorySchema repSchema=null;
RepositoryIdentifier repIdentifier=null;
DBMSType dbmsType = DBMSType.MS_SQL;
String session=null;
String connection = "MDM_SERVER_PROD";
String repository = "TEST_REP";
simpleConnection = SimpleConnectionFactory.getInstance(connection);
repIdentifier = new RepositoryIdentifier(repository, connection, dbmsType);
RegionProperties dataRegion = getRegion();
CreateUserSessionCommand createUSesCmd = new CreateUserSessionCommand(simpleConnection);
createUSesCmd.setDataRegion(dataRegion);
createUSesCmd.setRepositoryIdentifier(repIdentifier);
createUSesCmd.execute();
session = createUSesCmd.getUserSession();
AuthenticateUserSessionCommand authUSesCmd = new AuthenticateUserSessionCommand(simpleConnection);
authUSesCmd.setSession(session);
authUSesCmd.setUserName("Admin");
authUSesCmd.setUserPassword("pass123");
authUSesCmd.execute();
GetRepositorySchemaCommand getRepSchCmd = new GetRepositorySchemaCommand(simpleConnection);
getRepSchCmd.setSession(session);
getRepSchCmd.execute();
Just put all the execute statements within try catch block
Regards,
Jitesh Talreja -
How to create a valid database User/Group for installing Linux 5,3
HI:
I am trying to install E-Business Suite on LINUX and gave me the following error report
Unable to validate Database User/Group :oralce /dba
Provide a valid Database User/Group for the installation.
when I was installiing on Windows, it did not gave me this error.
How do I have to crate a user/Group to install eBusiness on my Linux/
Please help
AliHi user;
hi Ali;
Yes I run as a root userKeep using root
When I use the following at the terminal
It gave me a error message
" Provide a valid Database User/Group for the installation. "
Here is what I type at the terminalIts seems normal becouse u try to create same user!
root@vis groupadd dba
root@vis useradd -g dba -d /home/oracle vis
root@vis useradd -g dba -d /home/oracle oracle Try this plz:
groupadd dba << i think this group already created!
useradd -g dba -d /home/applmgr applmgr << for apps node
useradd -g dba -d /home/oramgr oramgr << for db node
As you notice we define 2 different user under /home path!
Regards
helios -
How can I hide the password and user name in url???
Hi experts,
I'm creating a login page and know I have a problem.
The Username and password are verified in a Java class, after checking the user and password, the user should be linked to the portal.
So far everything has worked well.
But when I call the lin like this
res.sendRedirect ("/ irj / portal j_user =" + UserN + "& j_password =" + passw);
then the user name and Pwasswort appears in the url.
Can someone tell me how can I hide the password and user name???
It will be very helpful.
Thank you
Edited by: Cilvaring on Aug 5, 2011 12:00 PMIf there is no specific reason that you have to use sendredirect...thne you can try request.forward.....
RequestDispatcher rd = request.getRequestDispatcher("pathToResource");
rd.forward(request, response); -
Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off? chessatwork has ran great for me for many yrs, then one day I down loaded firefox and went to play chess on this site chessatwork.com, well the window popped up asking to remember the log in and pass word and so I said ok, and it did, but now when I click log in and I go to my main page (home) and click on any link, say to play game I return right back to log in
See http://kb.mozillazine.org/Deleting_autocomplete_entries<br />
Remove a saved password here: Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
You may also need to remove the cookies from that website.<br />
* Tools > Options > Privacy > Cookies: "Show Cookies" -
How to create a public view for sharepoint list A and deploy this view to specific user personal view? Is that possible OOTB?
Views cannot be exported or moved. Can you elaborate your requirement?
--Cheers -
How to create global groups for end users
Just started deployment of Lync 2013. We do not host our exchange / mail internally. It is a hosted solution (not exchange). We do use outlook though.
It has been a long time since I set up Lync (Since OCS 2007 / 2007 R2)
Can someone please tell me how to create groups for all users on the Lync Client and populate them from groups in AD.Right now we are using Spark and we have decided to use Lync. In Spark it queries AD every day and populates the groups from AD
groups that we have defined.
I know that users can create there own groups, but we prefer to have every client have every group (department) and those in department listed below rather than them have to manually add them individually.
Thanks for your direction.
JohnHello john,
Lync Client can't use AD group or Exchange mail group. You can't create Lync client group with AD GPO. each Lync user can create their own group in Lync client and of course can delete.
You can not manage Lync client within the
group as the centeral. There is no such
feature in Lync. you can examine 3rd party applications. for example ;
http://www.vytru.com/contacts-manager-for-microsoft-lync.html
Regards
Zulfikar CAGLAR
The statement is incorrect. You CAN use Distribution Groups from Active Directory in Lync Client:
http://support.sherweb.com/Faqs/Show/how-to-add-contacts-from-distribution-lists-in-lync-2013
Please “Vote As Helpful” and/or “Mark As Answer” if this post helped you. -
New user created. How to create Central Person and Business partner
Hi,
I got a new users created in SRM 5.0 .how to create Central person and business partner.
Without CP & BP we cannot work. please guide.
Regards
G.Ganesh KumarHI GANESH
As you aware , assign the user to organisation structure via users_gen , the system will create a BP and Central Person , Position and user for you.
br
muthu -
HOW DO I DONT ALLOW MY COMPUTER TO SAVE PASSWORDS AND USERS NAMES??
HOW DO I DONT ALLOW MY COMPUTER TO SAVE PASSWORDS AND USERS NAMES??
In Safari, go to Preferences (in Safari's menu) and choose AutoFill at the top. Uncheck Save User Names and Passwords.
-
I need to have my macbook pro repaired how can I hide passwords and banking info?
I need to have my macbook pro repaired how can I hide passwords and banking info?
Create a new admin account named repair and only give them the password for that account. Alternately you could back up or clone your system, erase the hard drive and then reinstall OS X with one admin account that has no personal information.
-
How to create a new admin user in oracle 9i?.
Hi I am new to oracle. I want to set up a new database for my application.
How to create a new admin user in oracle 9i?. I would like to have a new schema. where I can create tables for my application from scratch.If I understand your question correctly:
You need to be connected to the database with the user SYS.
open a command-line session and do the following to create an Oracle user with DBA option other than SYS.
C:\>sqlplus /nolog
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Oct 14 08:46:13 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> conn / as sysdba
Connected.
SQL>
SQL> create user test identified by pass;
User created.
SQL> grant create session to test;
Grant succeeded.
SQL> alter user test account unlock;
User altered.
SQL> grant dba to test with admin option;
Grant succeeded.
SQL> conn test/pass
Connected.
SQL>
SQL> sho user
USER is "TEST"
SQL>Now you have a user with username 'test' and password 'pass' with DBA role with Admin option
Tony Garabedian
From now on you can connect directly with SQL*Plus no need for comman-line. Just provide the username/password and you're logged in.
Message was edited by:
Tony Garabedian
Maybe you are looking for
-
When using URLConnection read input stream error
hi, In my applet I build a URLConnection, it connect a jsp file. In my jsp file I refer to a javaBean. I send two objects of request and response in jsp to javaBean. In javabean return output stream to URLConnect. At that time a error happened.WHY???
-
Trial after effects and premier pro?
Hi, I'm trying to download a trial of premier pro and after effects. The pop up for applications manager pops up but there is no option to download either program for trial? Can someone point me in the right direction? Thank you
-
I cant play recorded videos n my 5230
hi guyz...i've bought a new 5230,n stocked it with lot f stuffs.now i cant play videos which i had been recorded.it got stuck after so,etime. The sound go streaming without any problem on the background!.am using the default real player. I downloaded
-
Hi Gurus, I have requirement like mail from sap z-transaction will go to manager , manger will reply that same mail. Again what he/she has replied should be captured and same has to be updated in sap. Now, I want to know what to do to for reply proce
-
Sun ONE Synchronization 1.1 client issues
Hello all! I have some questions on the synchronization process, where can I get help? Is this the right place? I suddenly got some errors like '159 items should be deleted form Palm Device' or similar and the palm desktop and the handheld aren't syn