How to create horizontal line dynamically after evry line item

Hi all,
I have to redesign the sapscript.
For a invoice for every new material a horizontal line will be drawen.After that for that material all new line item will be displayed than again a horizontal line should drawn.
In dynamic how i can know how many line item will be there for the particular material.
Guranted points will be rewarded .
Regards
raj

Hi
1st u draw a table and in that u mention all the line items. You can change the size from there it self
    The Code is here for drawing the Box for Total in last page (where there is no next page)
    /:   IF &NEXTPAGE& = 0
    /:   BOX FRAME 10 TW
    /:   BOX HEIGHT 0.8′ CM FRAME 10 TW
    /:   BOX HEIGHT 1.9′ CM FRAME 10 TW
    /:   BOX XPOS 2.5′ CM YPOS 0.8′ CM WIDTH 1.1′ CM HEIGHT 1.9′ CM FRAME 10 >
Now some help from help.sap.com to understand the code better
1. /: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Reward all helpfull answers
Regards
Pavan

Similar Messages

How to insert horizontal line dynamically after every line item in sapscrip

Hi All,
I have to insert a horizontal line after every new item in sap script.
How to do this .
In some material there is2 line item or in other line item it ay be more .
How to insert horizontal line dynamically after every line item
Point will be rewarded
Regards
Niraj

Hi Niraj,
You can get your work done by keeping the horizontal line (&ULINE&) after all the item level fields, in this case once each item line is written you will get a horizontal line.
In case you have different fields for the item lines which are optional (not printed every time) then you can have them in an IF....ENDIF condition and below the endif use a horizontal line.
Some thing like this:
/E ITEM_HEADER
IL <TI>Item,,Material,,Description</>
IP <TI>,,,,Quantity,,,,Price,,Price unit,,,,,,Value</>
/ &ULINE(71)&
Let me know if this helps, else please describe your problem with an example.
Luck.

How to create an inspection lot for each line item of the Purchase order?

Hi,
How to create an inspection lot for each line item of the Purchase order ?
In detail if possible.

Hi
please check this
[thread|Create Inspection Lot;

How to create some columns dynamically in the report designer depending upon the input selection

Post Author: ekta
CA Forum: Crystal Reports
how to create some columns dynamically in the report designer depending upon the input selection
how export this dynamic report in (pdf , xls,doc and rtf format)
report format is as below:
Element Codes
1
16
14
11
19
10
2
3
Employee nos.
Employee Name
Normal
RDO
WC
Breveavement
LWOP
Sick
Carers leave
AL
O/T 1.5
O/T 2.0
Total Hours
000004
PHAN , Hanh Huynh
68.40
7.60
76.00
000010
I , Jungue
68.40
7.60
2.00
5.00
76.00
000022
GARFINKEL , Hersch
66.30
7.60
2.10
76.00
In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
Can anybody help me how do I design such report....
Thanks

Hi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu

How to create a folder dynamically in KM repository

Hi All,
Could you please let me know how to create the folder dynamically in KM...
Thanks in Advance,

>
Romano Bodini wrote:
> Hi,
>
> Search the forum. And the SDN. Then ask.
>
> [Creating folders in KM dynamically|http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1761]
>
> Romano
Actually, "look at the API documentation" should be in that list.

How to create Oppertunity doc automatically after lead in CRM SALES

Hi,
how to create oppertunity doc automatically after creating lead in crm sales
Thanks7regards
kishor kumar

Hi Kishore,
Create SAP Business Workflow for Opportunity from Lead
Use
A lead is a business transaction that describes, stores, updates, and manages the potential business interests of a business partner, and the interactions based on this over a period of time. The goal is to provide the "sales" area with the information gained in the lead, in order that it can be used as a basis for deciding whether to create an opportunity.
The information gathered in the lead is transferred to the "sales" area via the workflow "create opportunity from lead".
In the workflow, you decide whether the opportunity is generated manually or automatically.
If the lead-specific attributes Priority and Lead group fulfill specific criteria, the workflow automatically generates an opportunity. Otherwise, the workflow sends a work item to the sales employee responsible, for manual creation. Once he has checked the data in the lead, the sales employee can either reject this lead or create an opportunity from it.
The workflow is automatically started when the lead is saved.
The sales representative entered in the lead is first taken as the sales employee whose task it is to create the opportunity based on the information in the lead. This person can be determined using partner determination in CRM, depending on the prospect in the lead, and can, for example, be a manager of a sales area. If no sales representative is entered, the workflow takes an organizational unit assigned in the workflow template, and sends the work item to all users assigned to the organizational unit.
Prerequisites
u2022     The type linkage for the start events AttributeChanged and SetErrorFree for the workflow WS10001011 are deactivated as a standard procedure, and, if you wish to start the workflow template, they have to be activated again in Customizing. The workflow task processors must also be maintained. In Customizing, choose Customer Relationship Management  Basic Functions SAP Business Workflow  Perform Task-Specific Customizing.
u2022     The workflow template uses the user statuses SAAC (accepted by sales) and SARE (rejected by sales) of the status profile CRMLEAD. If you have defined several user statuses, the data flow for task TS10008154 (set status) must be adapted accordingly.
u2022     When the opportunity is created, the workflow template uses the opportunity transaction type OPPT. If you have defined several transaction types for the opportunity, the data flow for task TS10008151 (create opportunity) must be adapted accordingly.
u2022     If the sales employee rejects the lead, the workflow resets the qualification level to value 02 (warm). If you have specified your own qualification levels in Customizing, you need to adapt the data flow for task TS10007918 (change qualification level) accordingly.
Process of Workflow WS10001011 (create opportunity from lead)
The workflow "create opportunity from lead" is started when a lead is saved with qualification level Hot and status Error-free. The system uses the lead-specific attributes Priority and Lead group to check whether an opportunity can be automatically created, or a sales employee first needs to decide. If the sales employee decides that an opportunity can be created, the lead status is set to "accepted by sales", and an opportunity is created in the background. If necessary, this is forwarded to the sales employee to check. If the sales employee rejects the lead, the lead status is set to "rejected by sales", and the initiator is informed by mail.
The workflow is ended if no opportunity is created and
o     the lead is deleted or
o     the qualification level of the lead is changed to a value other than Hot or
o     the status of the lead is changed to a value other than Error-free.
Path for the workflow:
==> SPRO
==> Customer Relationship Management
==> Basic Functions
==> SAP Business Workflow
==> Perform Task-Specific Customizing
Select the Application Componenet Abbrevation as CRM and expand
Select CRM-BTX and expand
Select CRM-BTX-LEA and click on Activate event linking and acivate workflow WS 10001011
It may helps you
Regards
Narayana

How to create alv table dynamically by performing action on the button.

Hi all,
my requirement is to create alv table dynamically.
that is i will create two buttons
1) show alv table
2) close alv table
if user selects show alv table then the alv table should be displayed.
and if user selects clsoe alv table then the alv table should be closed.
to create alv table dynamically i have followed this procedure.
under view properties i have added salv_wd_table component. then under the action of showalvbutton i went to code wizard and i have selected instantiate used component component use salv_wd_table. the following code will be generated
with this code i am unable to display alv table dynamically correct me where i went wrong kindly send me the necessary steps how to create alv table dynamically
data lo_cmp_usage type ref to if_wd_component_usage.
lo_cmp_usage = wd_this->wd_cpuse_salv_wd_table( ).
if lo_cmp_usage->has_active_component( ) is initial.
lo_cmp_usage->create_component( ).
endif.
to close table i have used the following code. with this code i am able to achieve the functionality to delete the alv table
data lo_cmp_usage type ref to if_wd_component_usage.
lo_cmp_usage = wd_this->wd_cpuse_salv_wd_table( ).
if lo_cmp_usage->has_active_component( ) is initial.
else.
lo_cmp_usage->Delete_component( ).
endif.
Thanks & Regards,
Naveen
Edited by: naveen.webhelp on Feb 10, 2011 5:52 AM

Hi
ALV table will be shown in the viewcontainerUI element.
it is shown there empty if you dont fill the node bound to the data node of the interface controller of the comp usage
SALV_WD_TABLE.
and if you are not getting the table filled in the first place.
then check have you mapped the DATA node to some node in the comp controller
wht basically is your requirment is that you want to show ALV gird on click of one button and delete it on click of other button.
there are many ways to do so.
best way is control the visiblity of the viewcontainer UI element which containes the TABLE view of SALV_WD_table comp.
create an attribute of type WDUI_VISIBILITY name say VIS.
now go to the layout and bound hte visible property of the viewcontainer to this attribute VIS.
then in the showalv grid button's eventhandler write
wd_context->set_attribute(
name = 'VIS'
value = '02'
and in the wddoinit and delete alv grid button's event handler write
wd_context->set_attribute(
name = 'VIS'
value = '01'
thanks
sarbjeet singh

How to create report with dynamic columns with static row labels

Hi All,
I am creating one report as per attached format. I have labels on the right side of the report
and data in 3 columns. The data is taken dynamically from the command query.
It gets data from 3 different result sets/command queries.
I tried creating the report horizontally instead of vertically, but the logo image I am not able to rotate in 270degrees.
Can anybody tell me how to create the report...??

Hi Abhilash,
Thanks for the quick reply.
Actually the problem is with the image, as I am not able to rotate 270 degree. Crystal report cannot support the rotation of image.
i have another problem, I have to create a report in which
Lables are fixed on the left side of report and 3 columns per portrait page. Those columns are
dynamically created and shown in the report.
The format is like the above. Can you please help me in doing this report, as I tried it doing
with CrossTab. I am really stuck to this report.

How to create a .BIL file after scanning by a hyperspectral camera

I have tried to search everywhere how to create a .BIL and .hdr files (ENVI format) by LabVIEW (or related languages) after do line scanning by a hyperspectral camera. Does anyone have the VI source code or library drivers to do it? or Can you suggest me a solution?

Hi Link Butler,
I don't believe that there is a direct way of saving and image in the BIL format. However, from the information I have seen online, you will very likely be able to recreate this file type in LabVIEW. Although, the exact arrangements I have seen have been contradictory in some cases, it appears that a BIL file will contain no header information and only contain binary data on the Red, Green, and Blue pixel values of the image.
So, in LabVIEW, we can split the RGB values of a color image using the 'IMAQ ExtractColorPlanes.vi' and then use the 'IMAQ ImageToArray.vi' to breakout each pixel value for the new Red image, Green image, and Blue image. From here, you would want to rearrange the 2D arrays of pixel values according to the BIL standard (again I found conflicting information on this) and write to a binary file.
Attached below is a VI showing how to use the 'IMAQ ExtractColorPlanes.vi' to create a new image for the R, G, and B aspects of a color image.
Matt
Product Owner - NI Community
National Instruments
Attachments:
ExtractRGB.vi ‏63 KB

How to create and destroy dynamically an array

How to create an array of container dynamically and destroy it. I have an array of container which is to be sorted by comparision, but in sorting out the elements i want to delete some of the elements based on comparision.I run a for loop based on the number of elements in the array to be sorted. So what i do is take the elements into another array which i want to create it dynamically and reassign the new array back to the old one after sorting and delete it.

Hi kpraveen,
Maybe this thread helps,
http://forums.ni.com/ni/board/message?board.id=330&message.id=18421&query.id=288653#M18421
Greetings
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Kudos button (Gold Star) and see what happens =s=i=g=n=a=t=u=r=e=
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

How to create diferents deliveries for each schedule line

Dear gurus,
I have sales orders with many schedule lines in order to deliver in diferents dates. We need to create all the deliveries together but each schedule line needs to be in a diferent delivery with the corresponding delivery date.
I analiced the customizing about pool for delivery creation (VL10) but all I can change is for display and can not change the way the delivery is created. If we select two schedule line with diferent dates, the proccess create only one delivery with the total quantity and the first date of delivery.
Anybody knows some way to make the proccess create individual deliveries from diferents schedule lines?
Tanks in advance!
Marina.

Hello Marina
I hope you are using VL10E. Did you try working with Delivery creation date (range) and Delivery Date calculation rule? For example if you go for a value of 2 for the CalcRuleDefltDlvCrDt ('Rule for determining default value for deliv. creation date), then system will consider only those sched lines which are to be delivered today and tomorrow.
You also have the possibility of setting up your own routine for CalcRuleDefltDlvCrDt.
Thirdly SAP has suggested a solution for Scheduling agreements ( valid for releases upto 4.7). In this SAP has suggested solution 4 for ensuring all schedule lines are not delivered together. You can customize the code to include Sales orders ( in stead of Sched Agreements) in your case. Though it is for release 4.7, I think you can use the smae concept in ECC also.
137937 - SD scheduling agreement: Delivery split for each schedule li
Check it out and let me know how it goes. Good luck.

How to create a viewobject dynamically without using wizard

Hi,
I am Using jDEV 11G, i need to create a viewobject dynamically without using wizard, without binding from any entity.
Actually my intention is to make a grid like in .Net, when a user want to create a new row in RichTable without using DB.
just like shopping cart.
i have done thsi code:
ViewObjectImpl view=new ViewObjectImpl();
view.addDynamicAttributeWithType("Att1","String",null);
view.addDynamicAttributeWithType("Att2","String",null);
view.addDynamicAttributeWithType("Att2","String",null);
Row rw=view.createRow();
rw.setAttribute("Att1","First1");
rw.setAttribute("Att2","First2");
rw.setAttribute("Att2","First3");
view.insertRow(rw);
I have a RichTable , i need bind this viewobject into that.
Edited by: vipin k raghav on Mar 10, 2009 11:39 PM

Hi Vipin,
You can create the view object with rows populated at run time.
[http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcquerying.htm#CEGCGFCA]
For reference of how to create an empty rwo at run time on button click
[http://kohlivikram.blogspot.com/2008/10/add-new-row-in-adf-table-on-button.html]
~Vikram

How to create a view dynamicly in plsql?

I need to write a pl/sql package to create a view dynamic
,but i can't use 'create or replace view xxxx as select *
from db where ...',I know the dbms_sql package can parse the
'select' sentence,but i don't know how to create a view,only can
drop a view,who can help me?
thanks!
null

Try 'EXECUTE IMMEDIATE 'CREATE AS SELECT....' in your PL/SQL
xhpxorcl (guest) wrote:
: I need to write a pl/sql package to create a view dynamic
: ,but i can't use 'create or replace view xxxx as select *
: from db where ...',I know the dbms_sql package can parse the
: 'select' sentence,but i don't know how to create a view,only
can
: drop a view,who can help me?
: thanks!
null

How to create a textfile dynamically(with in the loop) with given data?

Hi all,
Can anyone Please guide me how to create a text file in the given path dynamically? (with in the loop) with given data.
For example:
<%
String data1="name";
String data2="address";
for(int i=0;i<10;i++)
create the textfile at c:/test/sample.txt//name of the each file created being "sample.txt"
//contents of text file will be
data1+i; //to get name1,name2.....
data2+i// to get add1,add2........
delete(sample.txt) //to enable to create another file in the loop with same name
%>

The code which Ashokan mentioned is not is not creating a file.
i used code given below to create and write into it.
But, not is writing into it. I don't konw, where i am going worng !
Code
String sample2="C:/Ash/sample2.txt";
                                                                                FileWriter fw = new FileWriter(sample2,true);
                                        BufferedWriter bw=new BufferedWriter(fw);
                                        bw.write("EMP ID");
                                        bw.newLine();
Please help
Regards
aSh

How to create internal table dynamically based on a table entry

hi Experts,
I have table yprod_cat. It has product categories.
In my ABAP program I need to create internal table dynamically based on the number of entries in the table.
For example:
If the table has 3 entries for product category
1. Board
2. Micro
3. Syst
Then create three (3) internal tables.
i_board
i_micro
i_syst
How can we do this? Any sample code will be very usefull
Thanks & Regards
Gopal
Moderator Message: No sample codes can be given. Please search for them or work it!
Edited by: kishan P on Jan 19, 2011 4:22 PM

Our APEX version is 4.2We are using below SQL query to display radio groups dynamically..
SELECT APEX_ITEM.RADIOGROUP (1,deptno,'20',dname) dt
FROM dept
ORDER BY 1;
Created a form using SQL type and given abouve SQL query as source.. But when we run the page, there were no radio groups displayed in the page..
Below is the output of the query..
<input type="radio" name="f01" value="10" />ACCOUNTING
<input type="radio" name="f01" value="20" checked="checked" />RESEARCH
<input type="radio" name="f01" value="30" />SALES
<input type="radio" name="f01" value="40" />OPERATIONS
>
If Tabular Form:
Edit Region > Report Attributes > Edit Column > Change the Column type to "Standard Report Column"
If normal Page Item:
Edit Page Item > Security > Escape special characters=No.
Pl read the help on that page item to understand the security risk associated with =NO.
Cheers,
Edited by: Prabodh on Dec 3, 2012 5:59 PM

How to create horizontal line dynamically after evry line item

Similar Messages

Maybe you are looking for