How to create Infotype entry in table T777D

Hi All,
We have undergone Upgrade from 4.6C to ECC 6.0.
Now we get an error while maintaining certain data infotype 0122 does not exists.
I looked at the entries in table T777D in both the system. In older system the entry is there but not in the new system.
When i tried creating the entry in this table the error comes 'Module pool program MP012200 is not present'. This program was there in 4.6C but is not there in ECC 6.0.
How do we genrate this program or how do we create the entry for this infotype to correct the error.
Is there any customizing settings that is required?
Please advice.
Regards,
Vidya.

Look at OSS [Note 546167 - Termination in PA10: Infotype 0122 does not exist|https://service.sap.com/sap/support/notes/546167]
>Symptom
>
>When you edit the master data (transaction PA10) after you upgrade Release 4.6C to Release 4.70 or higher, a termination occurs and an error message is issued informing you that infotype 0122 does not exist.
>
>Other terms
>
>No entry in table T777D
>
>Solution
>
>In the 'Infotype attributes (Customizing)' view (extended table maintenance for view V_T582A), delete the entry for infotype 0122.
>In the 'Infotypes - country-specific settings' view (extended table maintenance for view V_T582L), delete the entry for infotype 0122.
Regards

Similar Messages

How to create an entry in Badi Filter table T77HAP_FLT_PRP

How to create an entry in Badi Filter table T77HAP_FLT_PRP

Hello Rahul,
Filter types should be created on badi implementations ( in transaction se19 )
Read my answer on this thread :
Re: BADI:Filter type un editable
I hope it helps.
Bulent

How to create tree by database table

hello sir ,
my table is as follows,
NAME LINK ID PID ROLLID
User mgt. f?p=131:1: 1 - 10 ////root node///
district 10 1 1 child
Roles 16 14 4 child
Users 11 10 1 child
ROLLID is given from another table whis is (ROLES). i making tree by the combinations of id , pid, & roll id. by the roll id i can manage the tree to do not display specific nodes to specific users.
ROLE table as :
ROLE_ID NAME DESCRIPTION
1 Administrator This is administrator
2 Assistant Director -
3 Assistant Statistical Officer -
4 Data Entry Operator -
but i think it is very complicated process . give me solution about it
also i have to give my images to each node. how can i do that?

You already have a thread going about this: Re: how to create tree by database table .
Scott

Unable to create new entry in table that has no primary key

Hi
I have a table which is required to have no primary key (except mandt). After i generate table maintanance, when I go to create new entries, the table control to enter the new values does not appear. When I click on edit->new entries, it goes back to the fields tab of the table. Same when i check through SM30.
If i maintain atleast one primary key, I am able to get the table control in new entries screen. However the requirement permits no primary keys except mandt. How can this be resolved?
Thanks
NM

Hi,
THE PROBLEM WITH UR TABLE IS
YOU HAD DECLARED MANDT AS THE PRIMARY KEY AND THERE IS NO OTHER KEY IN UR TABLE
iT'S NOT ALLOWING YOU TO ADD NEW ENTRIES BECAUSE MANDT IS THE ONLY PRIMARY KEY IN YOUR TABLE AND IT WILL HAVE A DEFAULT VALUE BASED ON THE CLIENT. SO IT'S NOT SHOWING YOU THE CREATE NEW ENTRIES OPTION.
SO TRY TO PUT ONE MORE FIELD AS THE PRIMARY KEY SO THAT YOUR PROBLEM WILL SOLVE VERY EASILY ALSO MAKE SURE THAT TABLE IS ACTIVATED.
REVERT IF U NEED SOME MORE HELP
Thanks &Regards.
Pavan.

How to create an entry TVARVC

hi how to create an entry...in TVARVC for a variable...

is it possible just go to TVARVC
utilities----> table contents-> creat entries.
just check with this .
Thanks

What is authorization object and how to create it for a table

Hi All,
What is authorization object and how to create it for a table?
Thanks

Hi
Authorization
For authorization checks, there are many ways of linking authorization objects with user actions in an SAP system. The following discusses three possibilities in the context of ABAP programming.
Authorization Check for Transactions
You can directly link authorization objects with transaction codes. You can enter values for the fields of an authorization object in the transaction maintenance. Before the transaction is executed, the system compares these values with the values in the user master record and only starts the transaction if the appropriate authorization exists.
Authorization Check for ABAP Programs
For ABAP programs, the two objects S_DEVELOP (program development and program execution) and S_PROGRAM (program maintenance) exist. They contains a field P_GROUP that is connected with the program attribute authorization group. Thus, you can assign users program-specific authorizations for individual ABAP programs.
Authorization Check in ABAP Programs
A more sophisticated, user-programmed authorization check is possible using the Authority-Check statement. It allows you to check the entries in the user master record for specific authorization objects against any other values. Therefore, if a transaction or program is not sufficiently protected or not every user that is authorized to use the program can also execute all the actions, this statement must be used.
AUTHORITY-CHECK OBJECT object
                        ID name1 FIELD f1
                        ID name2 FIELD f2
                        ID namen FIELD fn.
object is the name of an authorization object. With name1, name2 ... , and so on, you must list all fields of the authorization object object. With f1, f2 ... , and so on, you must specify the values that the system is to check against the entries in the relevant authorization of the user master record. The AUTHORITY-CHECK statement searches for the specified object in the user profile and checks the useru2019s authorizations for all values of f1, f2 ... . You can avoid checking a field name1, name2 ... by replacing FIELD f1 FIELD f2 with DUMMY.
After the FIELD addition, you can only specify an elementary field, not a selection table. However, there are function modules available that execute the AUTHORITY-CHECK statement for all values of selection tables. The AUTHORITY-CHECK statement is supported by a statement pattern.
Only if the user has all authorizations, is the return value sy-subrc of the AUTHORITY-CHECK statement set to 0. The most important return values are:
·        0: The user has an authorization for all specified values.
·        4: The user does not have the authorization.
·        8: The number of specified fields is incorrect.
·        12: The specified authorization object does not exist.
A list of all possible return values is available in the ABAP keyword documentation. The content of sy-subrc has to be closely examined to ascertain the result of the authorization check and react accordingly.
REPORT demo_authorithy_check.
PARAMETERS pa_carr LIKE sflight-carrid.
DATA wa_flights LIKE demo_focc.
AT SELECTION-SCREEN.
AUTHORITY-CHECK OBJECT 'S_CARRID'
                  ID 'CARRID' FIELD pa_carr
                  ID 'ACTVT' FIELD '03'.
IF sy-subrc = 4.
    MESSAGE e045(sabapdocu) WITH pa_carr.
ELSEIF sy-subrc <> 0.
    MESSAGE e184(sabapdocu) WITH text-010.
ENDIF.
START-OF-SELECTION.
SELECT carrid connid fldate seatsmax seatsocc
    FROM sflight
    INTO CORRESPONDING FIELDS OF wa_flights
    WHERE carrid = pa_carr.
    WRITE: / wa_flights-carrid,
             wa_flights-connid,
             wa_flights-fldate,
             wa_flights-seatsmax,
             wa_flights-seatsocc.
ENDSELECT.
Regards
Hitesh

How to create a record for table PLAF with order type 'NB'.

How to create a record for table PLAF with order type 'NB'(standard purchase order).
who can tell me the T-code or some usefull information?
Thanks.

Hi
This will be updated automatically when generate planned orders thru MRP. (MD02)
regards
Srinivas

How to create a tree in table?

How to create a tree in table?

Hi,
check these links,
Tree Structure:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/de59f7c2-0401-0010-f08d-8659cef543ce
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#31
/people/paolo.romano2/blog/2007/11/09/dynamic-tree-in-abap-webdynpro
Regards,
Muneesh Gitta.

How to create vertical Scrollbar in table control?

Dear All,
How to create vertical scrollbar in table controll.?
regards,
Dharmesh

Hi
It should be created automatically, if you can't see it, try to set the field lines of table control
PROCESS PBO
MODULE SET_ATTR_TC.
LOOP AT ITAB WITH .....
ENDLOOP.
MODULE SET_ATTR_TC.
DESCRIBE TABLE ITAB LINES SY-TABIX.
<TABLE CONTROL>-LINES = SY-TABIX.
ENDMODULE.
Max

How to create a multi-line table/column comment

Can someone tell me how to create a multi-line table or column comment?
Apparently, the concatenate operator (||) does not work with the COMMENT statement.
I've searched the Oracle manuals and couldn't find an answer.
COMMENT ON TABLE sometbl IS 'i would like to break up this comment into several lines in order to improve readability'; Effectively, this is what I'd like to do (but it doesn't work):
COMMENT ON TABLE sometbl IS
'i would like to break up ' || CHAR(10) ||
'this comment into several lines ' || CHAR(10) ||
'in order to improve readability' || CHAR(10); Oracle version is 10.2.0.4

Why not just
SQL> create table t (a int)
Createtable successfully completed.
SQL> comment on table t is 'i would like to break up
this comment into several lines
in order to improve readability'
Commenton successfully completed.
SQL> select * from user_tab_comments where table_name = 'T'
TABLE_NAME           TABLE_TYPE COMMENTS
T                    TABLE       i would like to break up
                                 this comment into several lines
                                 in order to improve readability
1 row selected.?

Can someone tell me how to create accounting entries with the account status as error

Hi,
Can someone tell me how to create accounting entries with the
account status as error?
Thanks!!
Danny

It's call fixed/static background, and it is NOT directly support by iweb, you will need post processing either in html or javascript.
Varkgirl (you need to search the previous forum) and I did it since iweb1:
try Safari, and scroll: http://www.geocities.com/[email protected]/Links.html
invisible link? roddy, fishing for info again?

How to create view for xmltype table in oracle

hi:
Can some one help me how to create view for xmltype table in oracle?
XMLType do not have column
Sem

Thank you !!
I read it and become very hard to implement what I want to do.
Can you give me example please?
My main goal to create view for xmltype table is to XQuery the XML data?
Do you have any other suggestion?
Please help
Ali_2

How to create simple scroll-bar table dashboard in Excel 2003?

How to create simple scroll-bar table dashboard in Excel 2003?
Pl mention from step 1 as I am new to this

Hi UltraDev,
We discuss SQL Server PowerPivot for SharePoint related issue in this forum. In your case, I suggest you post the question in the following forum for better support:
Excel IT Pro Discussion:
http://social.technet.microsoft.com/Forums/office/en-US/home?forum=excel
Regards,
Elvis Long
TechNet Community Support

How to create checkbox group and table dynamically?

HI All
How to create checkbox group and table dynamically?
Regards
Ravi

hi
check this links for creating tables dnamically
How to Create a table dynamically?
Re: how to create a table dynamically in webdynpro
and for checkboxgroup
IWDTransparentContainer rootContainer =
(IWDTransparentContainer)view.getElement("RootUIElementContainer");
IWDCheckBox check = (IWDCheckBox)view.createElement(IWDCheckBox.class,"Check"+k);
//Here "check"+k k represents a unique value every time u create so that u wont get a duplicate instance
check.setChecked(false);
rootContainer.addChild(check);
or Re: adding checkboxes dynamically

How to create TNS entry for db2 database?

hi,
I want to create a db2 database tns entry in tnsname.ora file. How do i create?
thanks

There seem to be several related threads about this concern.
Creating dblink for db2 database
How to create TNS entry for db2 database?
How to create TNS entry for db2 database?

How to create Infotype entry in table T777D

Similar Messages

Maybe you are looking for