How to create view for xmltype table in oracle

hi:
Can some one help me how to create view for xmltype table in oracle?
XMLType do not have column
Sem

Thank you !!
I read it and become very hard to implement what I want to do.
Can you give me example please?
My main goal to create view for xmltype table is to XQuery the XML data?
Do you have any other suggestion?
Please help
Ali_2

Similar Messages

What is authorization object and how to create it for a table

Hi All,
What is authorization object and how to create it for a table?
Thanks

Hi
Authorization
For authorization checks, there are many ways of linking authorization objects with user actions in an SAP system. The following discusses three possibilities in the context of ABAP programming.
Authorization Check for Transactions
You can directly link authorization objects with transaction codes. You can enter values for the fields of an authorization object in the transaction maintenance. Before the transaction is executed, the system compares these values with the values in the user master record and only starts the transaction if the appropriate authorization exists.
Authorization Check for ABAP Programs
For ABAP programs, the two objects S_DEVELOP (program development and program execution) and S_PROGRAM (program maintenance) exist. They contains a field P_GROUP that is connected with the program attribute authorization group. Thus, you can assign users program-specific authorizations for individual ABAP programs.
Authorization Check in ABAP Programs
A more sophisticated, user-programmed authorization check is possible using the Authority-Check statement. It allows you to check the entries in the user master record for specific authorization objects against any other values. Therefore, if a transaction or program is not sufficiently protected or not every user that is authorized to use the program can also execute all the actions, this statement must be used.
AUTHORITY-CHECK OBJECT object
 ID name1 FIELD f1
 ID name2 FIELD f2
 ID namen FIELD fn.
object is the name of an authorization object. With name1, name2 ... , and so on, you must list all fields of the authorization object object. With f1, f2 ... , and so on, you must specify the values that the system is to check against the entries in the relevant authorization of the user master record. The AUTHORITY-CHECK statement searches for the specified object in the user profile and checks the useru2019s authorizations for all values of f1, f2 ... . You can avoid checking a field name1, name2 ... by replacing FIELD f1 FIELD f2 with DUMMY.
After the FIELD addition, you can only specify an elementary field, not a selection table. However, there are function modules available that execute the AUTHORITY-CHECK statement for all values of selection tables. The AUTHORITY-CHECK statement is supported by a statement pattern.
Only if the user has all authorizations, is the return value sy-subrc of the AUTHORITY-CHECK statement set to 0. The most important return values are:
· 0: The user has an authorization for all specified values.
· 4: The user does not have the authorization.
· 8: The number of specified fields is incorrect.
· 12: The specified authorization object does not exist.
A list of all possible return values is available in the ABAP keyword documentation. The content of sy-subrc has to be closely examined to ascertain the result of the authorization check and react accordingly.
REPORT demo_authorithy_check.
PARAMETERS pa_carr LIKE sflight-carrid.
DATA wa_flights LIKE demo_focc.
AT SELECTION-SCREEN.
AUTHORITY-CHECK OBJECT 'S_CARRID'
 ID 'CARRID' FIELD pa_carr
 ID 'ACTVT' FIELD '03'.
IF sy-subrc = 4.
 MESSAGE e045(sabapdocu) WITH pa_carr.
ELSEIF sy-subrc <> 0.
 MESSAGE e184(sabapdocu) WITH text-010.
ENDIF.
START-OF-SELECTION.
SELECT carrid connid fldate seatsmax seatsocc
 FROM sflight
 INTO CORRESPONDING FIELDS OF wa_flights
 WHERE carrid = pa_carr.
 WRITE: / wa_flights-carrid,
 wa_flights-connid,
 wa_flights-fldate,
 wa_flights-seatsmax,
 wa_flights-seatsocc.
ENDSELECT.
Regards
Hitesh

How to create index for particular table in R3

Hi
My load is taking too much time and it leads to process over due error. Does creating indexes on table in r3 side will solve this issue? If so how can we find out on which table does this particular data source depend. I went to maintain extract structure and findout only one table is supplying data for this data source.
Is there any other factors depend to solve this.
Thanks
kk

Hi,
it will depend on the table.... Having an index created will speed up the loading but slow down the insert therefore slowing some process perhaps...
May I ask which table it is? And which fields would you need to index?
Are you sure that bottleneck is located in R/3? Analyze your loading time in the monitor and see if this is really the case.
Otherwise you can create index for a table in Tx SE11; first check if an index is not already created...
hope this helps,
Olivier.

Creating View for a table with parent child relation in table

I need help creating a view. It is on a base table which is a metadata table.It is usinf parent child relationship. There are four types of objects, Job, Workflow, Dataflow and ABAP dataflow. Job would be the root parent everytime. I have saved all the jobs
of the project in another table TABLE_JOB with column name JOB_NAME. Query should iteratively start from the job and search all the child nodes and then display all child with the job name. Attached are the images of base table data and expected view data
and also the excel sheet with data.Picture 1 is the sample data in base table. Picture 2 is data in the view.
Base Table
PARENT_OBJ
PAREBT_OBJ_TYPE
DESCEN_OBJ
DESCEN_OBJ_TYPE
JOB_A
JOB
WF_1
WORKFLOW
JOB_A
JOB
DF_1
DATAFLOW
WF_1
WORKFLOW
DF_2
DATAFLOW
DF_1
DATAFLOW
ADF_1
ADF
JOB_B
JOB
WF_2
WORKFLOW
JOB_B
JOB
WF_3
WORKFLOW
WF_2
WORKFLOW
DF_3
DATAFLOW
WF_3
WORKFLOW
DF_4
DATAFLOW
DF_4
DATAFLOW
ADF_2
ADF
View
Job_Name
Flow_Name
Flow_Type
Job_A
WF_1
WORKFLOW
Job_A
DF_1
DATAFLOW
Job_A
DF_2
DATAFLOW
Job_A
ADF_1
ADF
Job_B
WF_2
WORKFLOW
Job_B
WF_3
WORKFLOW
Job_B
DF_3
DATAFLOW
Job_B
DF_4
DATAFLOW
Job_B
ADF_2
ADF
I implemented the same in oracle using CONNECT_BY_ROOT and START WITH.
Regards,
Megha

I think what you need is recursive CTE
Consider your table below
create table basetable
(PARENT_OBJ varchar(10),
PAREBT_OBJ_TYPE varchar(10),
DESCEN_OBJ varchar(10),DESCEN_OBJ_TYPE varchar(10))
INSERT basetable(PARENT_OBJ,PAREBT_OBJ_TYPE,DESCEN_OBJ,DESCEN_OBJ_TYPE)
VALUES('JOB_A','JOB','WF_1','WORKFLOW'),
('JOB_A','JOB','DF_1','DATAFLOW'),
('WF_1','WORKFLOW','DF_2','DATAFLOW'),
('DF_1','DATAFLOW','ADF_1','ADF'),
('JOB_B','JOB','WF_2','WORKFLOW'),
('JOB_B','JOB','WF_3','WORKFLOW'),
('WF_2','WORKFLOW','DF_3','DATAFLOW'),
('WF_3','WORKFLOW','DF_4','DATAFLOW'),
('DF_4','DATAFLOW','ADF_2','ADF')
ie first create a UDF like below to get hierarchy recursively
CREATE FUNCTION GetHierarchy
@Object varchar(10)
RETURNS @RESULTS table
PARENT_OBJ varchar(10),
DESCEN_OBJ varchar(10),
DESCEN_OBJ_TYPE varchar(10)
AS
BEGIN
;With CTE
AS
SELECT PARENT_OBJ,DESCEN_OBJ,DESCEN_OBJ_TYPE
FROM basetable
WHERE PARENT_OBJ = @Object
UNION ALL
SELECT b.PARENT_OBJ,b.DESCEN_OBJ,b.DESCEN_OBJ_TYPE
FROM CTE c
JOIN basetable b
ON b.PARENT_OBJ = c.DESCEN_OBJ
INSERT @RESULTS
SELECT @Object,DESCEN_OBJ,DESCEN_OBJ_TYPE
FROM CTE
OPTION (MAXRECURSION 0)
RETURN
END
Then you can invoke it as below
SELECT * FROM dbo.GetHierarchy('JOB_A')
Now you need to use this for every parent obj (start obj) in view
for that create view as below
CREATE VIEW vw_Table
AS
SELECT f.*
FROM (SELECT DISTINCT PARENT_OBJ FROM basetable r
WHERE NOT EXISTS (SELECT 1
FROM basetable WHERE DESCEN_OBJ = r.PARENT_OBJ)
)b
CROSS APPLY dbo.GetHierarchy(b.PARENT_OBJ) f
GO
This will make sure it will give full hieraracy for each start object
Now just call view as below and see the output
SELECT * FROM vw_table
Output
PARENT_OBJ DESCEN_OBJ DESCEN_OBJ_TYPE
JOB_A WF_1 WORKFLOW
JOB_A DF_1 DATAFLOW
JOB_A ADF_1 ADF
JOB_A DF_2 DATAFLOW
JOB_B WF_2 WORKFLOW
JOB_B WF_3 WORKFLOW
JOB_B DF_4 DATAFLOW
JOB_B ADF_2 ADF
JOB_B DF_3 DATAFLOW
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to create events for Z table ?

Hi Experts,
Can anybody tell me how to create an event for Z table. I have a Z table in that a Particular filed is there as BELNR.
This Table is being getting updated by various application & even with the User-Exits also. I want to sned an e-mail whenver this particular field is getting updated by any program.
how to do this? which event to be used for a particular field?
Pl. Help....
Regards,
Umesh

Umesh,
I hope below method will help solving the requirement:
-Changes made to the keydocuments are recorded in the change document
Header table i.e. CDHDR and Item table CDPOS, Additional change
pointers are written in the BDCP and BDCPS tables. (BDCP and BDCPS in your case)
-A standard program RBDMIDOC is sechuled to run on periodic basis to
evaluate the change pointers for a message type and starts the ALE
process for distributing the Masterdata to the appropriate destination.
-'Object' is collection of fields of different database tables. T.code
for creating an object is SCDO.
Also:
1. BD61 Active change pointers generally
- Check the checkbox "Change pointers activated -generally"
- Save it
2. BD50 Active change pointers for Message Type
- Message Type Active
Thanks,
Preyansh

How to create UI for detail table in BP-form

Hi!
It is necessary to store some data in the detail table for OCRD. How I can create the UI for such table (like Contact Person in BPMD form)? I can create matrix, but how to force SBO to process my table just as OCPR.
SBO2004
Sry for english
Thanks

Have a look at all the e-learning material
e-learning material

How to create entity for the table which is not having the primary key

Hi,
Is it possible to create an entity for the table which is not having the primary key.
I have to write a method in my session bean and that method must use this entity.
any websites for this.

If you are talking about processes launched from a JVM (running outside), Process is available.
If you are talking about processes already running outside of a JVM, you could roll-your-own class to provide similar functionality as Process. This approach would be platform dependent, backed by the platform's I/O scripting and therefore limited to what the platform supports for process manipulation, e.g. Linux/Unix capabilities far exceed Windows.

Script to create synonyms for the tables of Oracle Applications

Team,
For Oracle Applications 11i on W2K, where might I find a script to create synonyms for all of the application tables? I would think there would be a standard script somewhere in one of the directories created during the install or on the CDs.
Thanks,
Luther

John, it is ssome sort of a bleed, but in this case it's not the part that 'might be cut off' that matters; it's the part that still needs to be on the page. Yes, I meant it to be (virtually) not-noticeable for the casual reader. Of course you can make it part of the page design, that ought to ease up matters.
The amount pages shift horizontally because of binding is called "creep", and this depends on the type of binding and the thickness of the paper. You cannot adjust for creep unless you know exactly how much this is and how your book is going to be printed and bound.
Airkite:
But the book that you printed worked out alright? Was it done with a different method?
This was a simple outlined text, not an image. Through the inaccuracies of printing and binding combined, there were no straight edges *anywhere* but fortunately the lines were thick enough to let you mentally connect them
This was done (I'm sure) with the method you proposed.
There is an alternative way, but it's way more expensive (on the other hand, the result is impressive): after the entire process of printing, binding, and cutting, books are put in a clamp one at a time and fed through a silk screen printer, fore edge on top, and printed with whatever you like.
I know of the existance of this technique but I haven't seen a book done like this in years and have no clue at all of the costs involved (writing that down in one sentence makes me realize those two might be connected).

How to create procedure for header table and item table

Hi,
Can anyone help me to understand how to write SQLscript procedure for looping item table inside header table?
I fetch records from sales header table ( order number ) and using that order number to loop sales item table,thereafter I need to perform business logic.
Any example similar above requirement would be helpful
thanks
Sourav

Hi Folks,
This is my use case
1) Select fact records from tables (say A,B,C,D ) with suitable Joins and certain Where conditions
SELECT ordid FROM TABLES A,B,C,D on join condition where ....
2) Using above header records , I have to select each and every item level data from different tables ( say X,Y,Z ) and perform calculation to derive new columns to update a new table ( Zreport )
UPDATE TABLE ZREPORT
SET col1 = ( Select qty FROM TABLE X WHERE ordid = A.ordid
UPDATE TABLE ZREPORT
SET col2 = ( Select price FROM TABLE y WHERE ordid = B.ordid.
and so on for other columns..
3) Zreport table will be used for reporting.
I would like to know the best way to achieve this to gain performance.
Appreciate the help!
Thanks
Sourav

How to create statistics for a table, How to analyse statistics ?

Hi Gurus,
Can someone throw some light on the subject pls?[b]

Did you have a look to the Database Performance Tuning Guide and Reference:
http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96533/stats.htm#13547

How to create index for a column of a view

Hi,
I have created view for a table and then i am trying to create index for a column of that view. i am using the query "CREATE INDEX index_name ON view_name (col)". but Mysql is showing error like "view_name is not a base table".
How can i do that......

As mentioned this is a java forum not a mysql forum, but as I know the answer - you can't create an index directly on a view in mysql.

[ADF Help] How to create a view for multiple tables

Hi,
I am using Jdeveloper 11G and ADF framework, and trying to create a view to update multiple tables.
ex:
Table A has these fields: ID, Name
Table B has these fields: ID, Address
A.ID and B.ID are primary keys.
B.ID has FK relationship with A.ID
(basically, these tables have one-to-one relation)
I want to create a view object, which contains these fields: B.ID (or A.ID), A.Name, B.Address.
So I can execute C,R,U,D for both tables.
I create these tables in DB, and create entity objects for these tables.
So there are 2 entity objects and 1 association.
Then I create a view object based on B and add fields of A into the view:
If the association is not a "Composition Association",
when I run the model ("Oracle Business Component Browser") and try to insert new data, fields of A can't edit.
If the association is a "Composition Association", and click the insert button, I will get
"oracle.jbo.InvalidOwnerException: JBO-25030: Failed to find or invalidate owning entity"
If I create a view object based on A and add filed of B into the view:
When I run the model and try to insert new data, fields of B can't edit, no matter the association is or is not a composition association.
So... how can I create a view for multiple tables correctly?
Thanks for any advices!
Here are some pictures about my problem, if there is any unclear point, please let me know.
http://leonjava.blogspot.com/2009_10_01_archive.html
(A is Prod, B is CpuSocket)
Edited by: user8093176 on Oct 25, 2009 12:29 AM

Hi Branislav,
Thanks, but the result is same ....
In the step 2 of creating view object, I can select entity objects to be added in to the view.
If I select A first, and then select B (the "Source Usage" of B is A), then finishing the wizards.
When I try to create a new record in the view, I can't edit any properties of B (those files are disabled).
If I select B first, and then select A in crating view object, the result is similar ...
Thanks for any further suggestion.
Leon

How to create a maintainance view for a table.

Hi All,
Can anyone explain me how do we create a maintainance view for a table?
Also, what access is required to create the view.
Is it true that for SAP tables we cannot create a maintainance view?
Appreciate any help on this.

Hi
Can anyone explain me how do we create a maintainance view for a table?

You can use the SE11 menu option 'Utilities-->Table Maintenance Generator' or you can use transaction SE54.
also check
http://help.sap.com/saphelp_nw04/helpdata/en/38/81c1351181b73fe10000009b38f839/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/38/81c1351181b73fe10000009b38f839/frameset.htm
Regards
krishna
Note: Award Points if helpful. Thanks

How to create variant for table/view ?

Hi,
When I go through SM30, I find a radio button called variant. I don't know the effect.
Can anyone tell me how to create variant for table / view ?
I want to know when we need to create variant for table/view.
Best regards,
Chris Gu

hi ,
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
Procedure
To create a new variant:
       1.      On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
       2.      On the variant maintenance initial screen, enter the name of the variant to be created.
Note the naming convention for variants (see below).
       3.      Choose Create.
If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
       4.      If there is more than one selection screen, select the screens for which you want to create the variant
5.      Choose Continue.
The (first) selection screen for the report appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
       6.      Enter the desired selection values, including multiple selection and dynamic selection.
       7.      Choose Continue.

How to create transaction for a maintenance view, Thank you.

How to create transaction for a maintenance view,
Thank you.
deniz...

Hi Deniz,
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
select
viewname and give ur table name.
UPDATE= Xsave
view - table name ( Should be upper case
update X ( should be upper case).
http://www.sap-basis-abap.com/sapbs011.htm
Hope this helps you.
Regards,
Viveks

How to create view for xmltype table in oracle

Similar Messages

Maybe you are looking for