Question about sets in report painter.

Hi, everybody. Please, could someone help me in this matter?.
I wanna delete a set with the GS04 transaction in Report Painter but I cannot.
When I put the set's id (XXX) in the set's name and push Delete-Set-F8 button, I get the following error:
The XXX set cannot be deleted.I consult the error with the help and SAP tells me that I need to use the set-usage option to view where the set is used in the system.
I select this set-usage option under the utilities menu and SAP tells me that the set is being used in a report.
The thing is that the report doesnt exist. I deleted the report before. Why the error is then.
However, I created, generated and compiled the report again in report painter with other different set so that I confirmed that the report was not using the XXX set and the error continues with report or without it.
That I tried to say was that the XXX set is not being used anywhere and the question then is why report painter is telling me that the set is being used in a report. Thing that is not true.
Thanks and I hope someone can help me out!!

Similar Messages

Question about Missing Timecard Report

Hi,
I have a question about Missing Timecard Report. As I aware when we run it it will only pull employee who has Timecard required = 'Yes' in the GRE of assignment.
I just run it and it pull all employee regardless they have Timecard required = 'Yes' set or not.

Rao , Thanks for your reply.
After I Changed locale to chinese in Linux, I can not seen chinese in Oracle Enterprise manager. So, I think my lunux box can not support Chinese .
When I run my report on windows2000 (Chinese version) application server, I can not see chinese character. But after I edit the uifont.ali and copy ARIALUNI.TTF to $reports_path, I can see chinese character.
Do you get my means?
Any question, Contact me.
Thank you very much !

Question about Setting Window Title/the use of AVWindowSetTitle()

Hi everyone,
I have a question about setting the title of the window in which the Acrobat viewer normally opens a PDF file. The documentation states that AVWindowSetTitle() cannot be used in this case. However, using it has worked with versions of Acrobat/Reader up until and including version 8.
Everything breaks down starting with Acrobat 9.
According to the documentation I am supposed to do the following: "To set the title of a window in which the Acrobat viewer opens a PDF file, you must replace AVDocOpenFromASFileWithParams() and pass the window title in tempTitle."
Unfortunately, there are 2 problems I have with this approach:
     I do need to be able to change the document title on document Save, not only on document Open
     I do not know what AVDocOpenFromASFileWithParams() implementation has to look like if I have to replace it using HFTReplaceEntry().
Is there a sample customized implementation of AVDocOpenFromASFileWithParams() somewhere that I could take a look at?
Is there a way to change a document Title inside Acrobat/Reader window after a Save operation?
Thanks a million,
Lana2010K

     I am sorry. I don't know how you tested this and came to conclusion that this works correctly in Acrobat X.
     I just tested our Acrobat plug-in with a trial version of Acrobat X and this did not work.
     When we open a file in Acrobat (doing it ourselves in the plug-in by adding another specialized open) we set the window title to something different from the default file name. Then if a file gets edited and saved (File->Save), the window title gets reset to the file name. In the PDDocDidSave callback we call AVWindowSetTitle() to set it back to a more descriptive window title we need. This has worked up until and including Acrobat 8, but does not work in either version 9.0 or 10.0.
     Also, I just modified the plug-in code to always change the Window Title of every document (even if opened through native File->Open) on document Save. It does not work.
     Please help,
          Lana2010K

Question about setting cookies and custom authentication

I have a question about setting cookies.
I have two different 'projects' in HTMLDB - we will call them App1 and App2.
I also have two different connection configurations setup in the DADs.conf file. - we will call them Connect1 and Connect2.
App1 is setup to use database authentication (no user is specified in the DAD) and uses Connect1. Once the user successfully logs in, we set a username cookie (this is a persistent connection).
We created a custom authenticatoin scheme for App2 - this scheme checks for the username cookie (set by App1). We would like for App2 to use Connect2 (HTMLDB_PUBLIC_USER is the default user specified and it uses connection pooling).
Is it possible to set a cookie from App1, Connect1 for App2, Connect2 - then redirect to App2 and pick up that cookie?
Here is an example of what we are trying to accomplish:
A user loggs into App1, we set a cookie, and the user is redirected to App2. If the cookie exists, we allow them access to the home page in App2, if no cookie, we redirect back to a 'Login Failed' page in App1. We don't want App2 to use the same database connection as App1 though, we need App2 to use connection pooling.
Is this possible? OR...Is there a better way to accomplish what we want to do?
This is an enhancement to an existing app. Our requirements are to use Database Authentication (setup where pass expires after 60 days or so, cannot reuse last 3 passwords, etc.) - which is already setup and being used by other applications in our organization. All of our users have accounts in the database. We don't want users to have a new username/pass - and we don't want to manage a separate group for HTMLDB apps.
The existing application uses HTMLDB's built in authentication - which uses database username/pass, and it uses connection pooling, but we cannot handle the pass expire stuff in it, unless there's something we're not seeing or understanding - at least that's how our DBA explained it to us.
Any help with this will be appreciated so much. I can send you the code we have if needed.
Thanks!

Same problem here. I have so many problems with this remote app. Is there an iTunes API? I would like to write my own remote app that actually works.

Question about setting Rows to "All" for defualt Interactive Report

I have a default report with 2 user requirements that I have some questions about.
1. The report in the data sould be 90 days old.
2. The report show "All" rows.
First to set the date I have this page process:
apex_util.ir_clear(p_page_id => 2);
apex_util.ir_filter(p_page_id=>2,
p_report_column=>'REQUISITION_DATE',
p_operator_abbr=>'GTE',
p_filter_value=>SYSDATE - 90);
I also set the rows to "All" and save the report to be the default. However I think when the "apex_util.ir_clear(p_page_id => 2)" is executed it clears someting and my report opens with rows set to "15".
Any ideas on this or even a better way to do it?

the following link may help...
It says that the ir_clear "Clears any report filters including default filters"
apex_util.ir_* documentation - where to find them?
Gus..

SETS IN REPORT PAINTER

I have a question. I defined in a set several accounts and in the data base or table may be posible not to have all the accounts I defined within the set.
If I dont have any account in the table defined within the set.....
How do I do to show these several accounts with no information in Report Painter??
THANKS.

There is one indicator - 'form printout' under report layout -> rows which allows you to print all rows irrespective of whether record exists in database or not.
See below help of this indicator:
Form printout
With form printout, you can print a list exactly as it is defined by the row sets.
This means that each set entry creates a corresponding entry in the report output, irrespective of whether a suitable database record is found. The system no longer breaks down intervals in row sets. They are treated as if they have a suppress indicator.
Without form printout, the system would only print rows for which a relevant database record is found. In addition, intervals without a suppress indicator would be broken down into the respective single values.
If the form printout indicator is set, the Report Writer internally creates data records with zero values and processes these as normal database records. This means that runtime will increase accordingly. This extra time needed is displayed in the report statistics.
Example
The row set contains the accounts 1000, 1001, 1002 and the account interval 1010 to 1030. During selection, database records were found for the accounts 1000, 1002, 1010 and 1015.
The following reports are output:
With form printout:
Amount
Account 1000
100.00
Account 1001
0.00
Account 1002
200.00
       |Accnts 1010-1030 |   700.00 | <- Caution: Interval is not
                                                                                | Total          | 1000.00                                  |             broken down
Without form printout:
Amount
Account 1000
100.00
<- Note: Account 1001 is missing
Account 1002
200.00
Account 1010
300.00
<- Caution: Interval is
Account                                                                                1015
400.00
<-          broken down
Total
1000.00

Question about making printible reports by reading data from database

We have a pressure test system which we want analyze and plot the instant pressure values in a pre-defined time interval. After each test we want the record the test results along with the other information(date, time, operator name, test no, product type, product number, etc.) added by the system operator. The data will be recorded to an access data base. Doing that, we want to make test results archive which we can make search within, to list the past test results, searching by date, seraching by product number, or searching by any other information in the database. Plus, in the future, we want to be able to take reports of these past test results, including the pressure/time graph and other information added by the system operator. Also we want to set the report format.
My question is, is it possible to do this with LABVIEW 8.2? Do we need any toolkits or add-ons?
Regards

Hi, Hasan.
That would be an excellent use of LabVIEW. At the very least, you'll probably want to get the Database Connectivity Toolkit, and depending on your needs you may also want the Report Generation Toolkit. There are a lot of tools in the LabVIEW Development Environment for generating reports dynamically, but the Report Generation Toolkit includes a lot of advanced functionality not included in regular LabVIEW installations.
That said, however, I really recommend you speak with one of our sales representatives to make sure you have everything you need. Since I know so little about how you'd be implementing each step of that process, I'm reluctant to guarantee it, and one of our representatives can tell you with much more certainty. You can get in touch with one from ni.com/contact.
Good luck! Have a nice evening.
Sarah K.
Search PME
National Instruments

Projects group/set for report painter

Dear,
I want to create a report painter report to compare cost of projects.
I would like to be able to create groups for my projects, like you can do for internal order with KOH1, and use these for my report.
how can I create these project groups and how do i use them in report painter?
Kind regards,
Sander.

Hi
In a report painter report - Once you have created a SET means you know for what values you want to execute the report...
In your form definition, you will see two check boxes beside your characteristic - i.e. One for Defining a variable for the char and the Other for using a SET..
If you want to use a variable - this means you would specify the values of the projects at the time of execution... For this, click on the relevant check box and you can specify any name in the field "Local Variable"
If you want to use a SET, this means you know for what projects you would like to see the report.. For this, check on the relevant check box and specify your SET there...
If you want to use both the above options, then you must create your set from GS11 and choose the radio button SET VARIABLE
Refer the set 1KOSET from GS13 as a sample...
And see report 1SIP-001 under library 1VK in GRR3.. This report uses 1KOSET under General Data Selection.... You will get an idea for what you want
Regards
Ajay M

Change the default setting for report painter reports.

HI All
Can we change the default setting in SAP/R3 in the report painter reports for the selection screen options?
If yes,Please let me know how we can change the default settings.
Thanks in Advance
Best regards
Venu

HI
We have a report developed in the report painter for profit center accounting and we have selection screen for this report.
Few of the selection screen fields parameter are set by default and we need to change the default setting for the selection screen fields parameters.
How and where do we set or change the default parameters for the selection screen ?
Thanks in advance
Best Regards
Venugopal

Question about witholding tax report S_PL0_09000447

Hi,
I have a question about the witholding tax report: S_PL0_09000447
For some vendors, no deductions are made, but the payments to those vendors should appear on the witholding tax report.
How is the report being created?
Kind regards,
Linda

Thank you.
Kind regards,
Linda

Mass Change of Sets for Report Painter/Writer Reports

Hi,
We have upgraded our system from 4.6c to ECC 6.0. We are using more
than 40 Report Painter/Writer reports which in turn are using Sets.
However, these sets are containing reference to a Table which we want
to change for all the set enmasse. e.g. If currently the sets are using
Table Reference "ABC", we want to change it to "XYZ" because the
table "ABC" is not at all existing in our new system ECC 6.0.
Even we are unable to change the sets through T.Code GS02 as the table
itself is not existing. And as the table is not existing, the Reports
are giving hard errors saying that the sets do not exist.
Kindly request you to guide us in this regard.
Thanks in advance,
Shalin Shah

Looks like you have to create new sets and assign them in the report replacing the old ones.

ECCS 6 CONSOLIDATION SET FOR REPORT PAINTER

Hi
I am configuring the Report Painter for the reports on ECCS consolidation. In the T CODE CXSA creating sets there is concept of formual.
Ecaxtly what i want is that, i want to spilt the value of a FS ITEM into 2 Account Group at the rate of 60% and 40%.
and for that i want to us Formula in the creation of Sets. Can anyone please tell me how this formual works.
Thanks & Regards
Krish

Hi
In a report painter report - Once you have created a SET means you know for what values you want to execute the report...
In your form definition, you will see two check boxes beside your characteristic - i.e. One for Defining a variable for the char and the Other for using a SET..
If you want to use a variable - this means you would specify the values of the projects at the time of execution... For this, click on the relevant check box and you can specify any name in the field "Local Variable"
If you want to use a SET, this means you know for what projects you would like to see the report.. For this, check on the relevant check box and specify your SET there...
If you want to use both the above options, then you must create your set from GS11 and choose the radio button SET VARIABLE
Refer the set 1KOSET from GS13 as a sample...
And see report 1SIP-001 under library 1VK in GRR3.. This report uses 1KOSET under General Data Selection.... You will get an idea for what you want
Regards
Ajay M

Question on Values from Report Painter

Hi All
I have defined a report painter report using the Library 0FL allowing the dril down functionality.
however, when i drill down on a certain figure, the amount showin on the report is not in sync with the total I get when i drill down..
Can anyone suggest to me why this is happening and how i can get the 2 figures to match?
Thank you
Rukshana

Hellio Rukshana,
I would suggest you to please check the SAP Note 1317478 (Report Writer: Drilldown not handled properly).
In case the problem is not solved, please execute first the report RFFMRC20 and later report RFFMRC04 and reconstruct data.
Here it is important that you execute these programs only for the earmarked fund that you are having the issue. Execute it in one test system in test run first and look for results.
RFFMRC04 program analyzes differences between line items and totals records in Funds Management.
If you start the program as an update run, it automatically adjusts the relevant totals records.
Ensure that no postings are made while the program is running as this may lead to errors being displayed where none has occurred. If the program finds FM account assignments where the line item total is not the same as the relevant totals record, these lines are marked in red. The system displays the amount total (totals record), line item total, and amount type for each line.
Please check the documentation of this program in SE38 for more information.
I hope this helps.
Kindly let me know if you are talking about some other drill down fucntionality other than the above.
Thank you.
Suresh Jayanthi.

Question about setting track level

Hi I finally got my new macbook pro and moto 8 pre and have just today tried a bit of recording just to get used to it. I am at the moment using garage band. I have a question about track levels. In Garage Band when I select a track to record there is a slider for input level or an option of clicking the automatic level control. But for some reason they are both just that color of grey you get when something can not be selected on a computer. How do I activate this? It's strange as I did actually manage to record the track, I just can't seem to really adjust the level. I thought maybe it has to do with the motu and I can only select the track level there, and that garage band level setting are (rightfully) disabled? Maybe that's what I should be doing, but just a bit confused. Anyway, thanks in advance for whoever takes the time to help out a newbie.

Ah, ok. Good to know. Thanks for the info.

Question about SET FRMLBOTTOMUP

I'm getting unexpected resutls when using this set command and could use some feedback. EXAMPLE OF CALC - SET FRMLBOTTOMUP ON;SET UPDATECALC OFF;SET CACHE HIGH;/*This step multiplies UNITS times RATE and records the results on AMT, for all level 0 entities of North America SS */FIX(&Svar_Years,&Svar_Scenario,"FA10","FA11","FA12","FA13","FA14",@RELATIVE("XX SS",0), Local,"4111_AMT" ) "Current Version"="4111_UNITS" * "4111_RATE";ENDFIXWith SET FRMLBOTTOMUP ON Essbase calcs "4111_UNITS" * "4111_RATE" correctly but places the result in not only "4111_AMT" but also in "4111_UNITS" and "4111_RATE", erasing what was previously there. This only happens with SET FRMLBOTTOMUP ON otherwise the calc of unit times rates works fine. It also works fine if I replace the left side of the equation from "Current Version" to the account "4111_AMT" which is a dense member. I don't understand why that should matter and what about SET FRMLBOTTOMUP ON causes Essbase to place the result of the formula in the members used to generate the result in the first place. Any suggestions would be much appreciated. Thanks.

thanks, can u explain when this server serialization
occurs and why? the application i am using uses lots
of beans with data coming from database, and those
beans are used for display and calculation during
user interaction(one session). is there a risk of
lossing information during the interaction when
server serializes session? thanksIt depends on the Server, and on the session manager used.
For instance, Tomcat, with the default manager, will try to serialize sessions when the context is restarted so that user data is not lost during application upgrades. It will also attempt to serialize if the JVM begins to run out of memory.
A second manager available in Tomcat will try to store all session data in a database, the file system, and the like so that it does not take JVM resources. This requires serialization.
Finally, You can use load balancing or other clustering techniques to back up Tomcat (so one server doesn't do all the work, or if it goes down, other servers will handle requests). Since sessions will need to be shared (or sharable) between different servers, the data must be serializable so it can be sent from one to the other (or actually sent and received through an external storage system like a DB) they must be serializable for this to work...

Question about sets in report painter.

Similar Messages

Maybe you are looking for