How to Create Internet user with email id as user id

Hi All,
I am having a requirement to create internet user taking email id as the user id, means the user id is same as the email id, to achieve this do I need to maintain some settins or is there any standard BAPI to do this.
Is this a standard feature of CRM 2007.
Thanks in advance,
Mayank

Hello Mayank,
B2C Scenario has these options for the parameter usertype in the Application definition.
In R/3 scenario: R3_SU05Customer_LoginEmail ISA R/3:This login configuration is the only one that is supported for ISA R/3 B2C. It cannot be chosen for the B2B and shopadmin applications. During B2C registration, SU05 users are created with type equals 'KNA1', referring to a newly created R/3 customer.
-In CRM scenario:_ CRM_Standalone_LogonConsumer: Standard user management settings if Internet Sales is used as a standalone, the login is based on the e-mail address. The internet users must use the SU01 user concept. Consumer is the keyword here. The BP associated with the SU01 user is a Consumer.
The B2C application is hard-wired the way it is defined above.
Now for the B2B application
In R/3 scenario: Only R/3 ISA provides some SU05 user possibilities. But they are not relevant to your situation
In CRM scenario: it gives CRM Standalone or CRM Portal possibilities. In CRM Standalone, the login id uses Alias. But nothing stops you from using keeping Alias same as the User ID. In case of Portal, the login occurs via Portal. That is user log on to portal and gets into ISA using SSO. The portal offers varieties of ways to authenticate including email adress, user id etc. This is made possible by use of LDAP in portal for user authentication. They maintain a mapping between email-id and user-id and do what you are seeing now in SDN. If you have Portal in your landscape, and let external B2B users come through Portal into ISA with SSO, you can also do login using email-id in a jiffy.
But in your case I think you are stuck with CRM Standalone
Easwar Ram
http://www.parxlns.com

Similar Messages

How to create the user on Internet Application Server(IAS) control console

Hi All,
My Client is asking me for How to create the user on Internet Application Server(IAS) control console 10.1.2( 10g release 2).
If anyone have the document for How to Create the User on Internet Application Server (IAS) console 10g release 2 , then please send me the document and help me out from this Concern.
Regards,
Yadav@intelli.
Edited by: 851080 on Apr 8, 2011 6:31 PM

Are you using OID? Can you provide more details about your iAS environment?

How to create portal user and integrate with external appl login

How to create portal user and integrate the user with external application for single sign-on ?
I want to access my external application thru portal user ..?
Shyam

Hi Jithin,
The link that you've shared talks about a different scenario.
In my case, I want to pass the portal user id when the user clicks on the Help Link present in the header area.
I am trying to pass it along with the Help Link Url property of a masthead iview but it is not getting passed to the target Url.
I would like to know if it is possible to pass the Portal User Id in this way or not.
Though if we create a appintegrator iview and pass the user id <User.UserID> along with the target Url, it reaches there.
Thanks & Regards,
Anurag

How to create a user account by mirroring another account in PowerShell (Trying to learn to use Powshell for some daily AD tasks intead of the GUI)

Hi,
I am trying to create user accounts via PowerShell instead of the Gui in server 2008 R2 (PowerShell 2.0).
I know how to create a user account with the following Power Shell command below is one from a dummy domain I created to practice.
PS C:\Users\Administrator> New-ADUser -SamAccountName "TestOut" -UserPrincipalNa
me "[email protected]" -GivenName "Test" -Surname "out" -DisplayName "Testou
t" -Name "Testout" -Enabled $true -Path "CN=users,DC=bwcat,DC=net,DC=int" -Accou
ntPassword (Read-Host -AsSecureString "Enter Account Password")
However when doing day to day tasks where I work normally we have a new hire, they contact IT and ask that a user account is created. I will ask who they would like to mirror.
I then would go into the gui pull up the user that they want to mirror right click him and choose copy. This would create a new user account that I would then fill out.
I am wondering if its possible to do this same thing via PowerShell, or if its not an option because it takes more work type up everything than it does to go into the gui and do it.
Anyway thanks for the help.

Hi Wilder, hi Mark,
first of all: The tutorial sources Mark posted - especially the book "Powershell 3 in A month of lunches" - are good to get a baseline start. A really great reference, especially when you try to learn it while still dealing with your daily business.
On another note, Wilder: While I fully agree that learning things sequentially is usually the best, I too jumped right in instead of learning how to walk first (though it's been some time now. Fewer years than you'd think, but still ...). So I thought I'd
give you a little aid with that function husk, so you could just stuff interesting bits into an available structure, making use of the fun tools in a useful context (It's fun fiddling around with the commands, but if you have to type in all of them manually
each time, using the GUI is often just faster. Doing fun things and being efficient with it feels even better though ...). So ... while I
do agree with yourself, learn it the Correct & Proper Way, I also do
intend to finish this little explanation about the husk, all the way to the end.
Everything below this paragraph is part of this.
function Copy-ADUser
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
) # Create finished Strings
$JoinedName = $GivenName + "." + $Surname
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName $JoinedName -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is again the same function husk I posted earlier. Only this time, I filled a little logic (the pieces that were already posted in this thread). This time, I'll not only go over each part again ... I'll do it by reposting the segments and trying to show
some examples on how to modify the parts. Thus some of it will be repetitive, but this way all the info is in one spot.
Segment: Comment Based Help
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
That's the premier documentation part of a function, that teaches a user what the function does and how to use it. It's what's shown when using the Get-Help cmdlet.
Comment texts are not restricted to single lines however. For example you could replace ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
... with ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
Creates a new user named Max Mustermann and copies the group memberships of the already existing user Jonny Normal to this new User
... and get an explanation on what the example does when using Get-Help with the
-Detailed parameter (Explaining examples is always a good idea).
Segment: Parameter
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
This is the segment that tells Powershell what input your function accepts. Each parameter of Copy-ADUser you set will be available in the next segment as a variable of the same name. You can add additional parameters if you need more information for your
logic. For example, let's add a parameter that allows you to specify what Organization the new user should belong to:
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[string]
$Organization,
[Parameter(Mandatory = $true)]
[string]
$Template
That's how that would look like. You may notice that I didn't add the line with
"[Parameter(Mandatory = $true)] this time. This means you
may add the Organization parameter when calling Copy-ADUser, but you need not.
Segment: Logic
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is the part of the function that does the actual work. Compared to the first husk I posted, this time there are two commands in it (and some comments). First, I create a new user, using the information passed into
the parameters -Surname and -GivenName. Then I Copy the group memberships of the user identified by the information given by the
-Template parameter.
So, let's modify it!
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
Now after adding a few lines, the logic will tell us what it's doing (and do so before it
is taking action)!
Hm ... didn't we create a change in the Parameter Segment to add an -Organization parameter? Let's use it!
# If the -Organization parameter was set, the $Organization variable will be longer than 0. Thus do ...
if ($Organization.Length -gt 0)
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname in the Organization $Organization"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -Organization $Organization -PassThru
# If the -Organization parameter was NOT set, the $Organization variable will have a length of 0. Thus the if-condition does not apply, thus we do the else block
else
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
There! Now we first check whether the -Organization parameter was set (it's not mandatory after all, so you can skip it). If it
was set, do whatever is in the curly braces after if (...). However, if it wasn't set, do whatever is in the curly braces after
else.
And that concludes my "minor" (and hopefully helpful) tutorial on how to use the function husk I posted :)
With this, whenever you find another cool command that helps you in the user creation process, you can simply add it, similar to what I did in these examples.
And if it all didn't make much sense, go through the tutorials in proper order and come back - it'll make much more sense then.
Cheers and good luck with PowerShell,
Fred
There's no place like 127.0.0.1

How to create a wiki with iWeb ?

Hi !
Any idea about how to create a wiki with iWeb ?
I want to make a school web page but, instead of doing it myself, I thought it would be more interesting to make every student contribute - that's the point of making a wiki ! Could anyone help me ?
Many thanks !
Cheers.
Chris.

I know Apple's tools are VERY compelling and tremendously cool to use, but, given the collaborative nature of this endeavor, you may want to look at some internet enabled tools that, by their nature, allow many users to update the content from anywhere.
Currently, if you're editing a page in iWeb, the information for that site is kept in the domain.sites folder. For several people editing the site, you would have to shuttle this file back and forth between all the users. If user A is currently editing the site, user B would have to wait until they're finished to get the file. If user A wants to make some changes, they'd have to wait until user B sends the file back to them and we haven't even got to the point of letting user C, D, or E have access to the content in order to make updates!! Add everyone else in the school and you would have to make sure this one file makes it across tens of computers without becoming corrupted and making sure that only one person is making changes at a time. This would limit the number of updates that can be handled on a regular basis (what if user M gets ill before handing it off to user N, now NO one can make updates until user M remembers where they left the content... if they didn't erase it).
However, if you're willing to severely limit the scope of what a wiki is, then you can get input from everyone and enter it with just a few users that have access to edit the content.

How to set up SAPconnect with email server

Hi,
Does any one know <b>how to set up SAPconnect with email server</b>
We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
Can any one provide the configuration steps or any document for this.
Thanks in advance..
Pratik

Hi Pratik,
Check the following link:-
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
these link will help u to config SMTP.
And one more thing u have to do..
Go to SE11 n open Table sxnodes in change mode.
And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
Hope this will work For U.
Regards
Sachin Dhingra

How to create a table with varied number of columns?

I am trying to create a balance table. The colunms should include years between the start year and end year the user will input at run time. The rows will be the customers with outstanding balance in those years.
If the user input years 2000 and 2002, the table should have columns 2000, 2001, 2002. But if the user input 2000 and 2001, the table will only have columns 2000 and 2001.
Can I do it? How? Thanka a lot.

Why did you create a new thread for this?
How to create a table with varied number of columns?

How to create a user for a database

hi all,
in the default ORCL database (oracle 10g) how can i create a new user. i did the below steps.
1. connecting as sysdba and creating a user
2. create user kumar identified by kumar;
3. create connect,resource to kumar.
but after this when i tried to connect the ORCl database with user 'kumar' it is giving me the ora-01017 error.
please help me how to create a user to a db using sqlplus.
Thanks,
Kumar.

Kumar_9985 wrote:
hi all,
im looking into wrong database. in my system along with orcl another db 'practice' is there. as both are having same ports(1521) and this 'practice' is default database when i connected as 'conn / as sysdba'. instead of this i should have been done as 'conn sys/sysdba@orcl as sysdba'.
sorry for posting this as issue.Has nothing to do with port 1521. That is not used by the database, it is used by the listener. And if you are configured properly (actually, if you are configured by default), the same listener listens on port 1521 for connection requests to all databases on the server.
If you were connecting to the wrong database with 'conn / as sysdba' it's because you had the wrong environment value for ORACLE_SID. In fact, with that connection request, you weren't useing the listener at all. When you added "@orcl", the connection request looked up "orcl" in the tnsnames file, and asked the OS network stack to pass the request on to whatever was using PORT= at HOST=. And that should have been (and obviously was) the listener.

How to create an user input variable for customer exit variable? - BW3.5

Hi Guru,
I have a requirement for the selection period of my reports. There are 3 possible reporting periods which should be user selectable:
1. Month: Current reporting month
2. Fiscal Year to Date
3. Project Year to Date
Here I need 2 variable to do these, 1 customer exit and 1 user input variable. I have created a variable customer exit to calculate all these requirement. But can any1 tell on how to create the user input variable for my customer exit? I need a user input variable with drop down list like below.
01-Current month
02- Fiscal Year to Date
03-Project Year to Date
I have create a new master data for this variable, but it's not working. What I need now is a standalone master data which do not need to link to any exiting records. Can any1 tell me how to create this?

Just go to the definition of the variable for which you have created a customer exit. There you will find a check box for "Ready for Input". Just tick that checkbox and the variable will be available as a selection variable in the reports selection screen.
Regards,
Yogesh

How to create Mobile User Account

Hi all,
I have a dumb question but it makes me crazy !!!
I'm new in CRM 5.2 and in mobile as weel.
My question is : How to create a user acount into my mobile infrastructure ?
I've followed the following explanation but I don't find the solution :
[help|http://help.sap.com/saphelp_crm60/helpdata/de/c8/2ae1a3c73245c8aef8c4b69c2ff072/content.htm]
In there, it tells me to go thought User Management tool of Mobile Application Studio ( is it Microsoft Visual Studio ?) but in there i do not find any tools.
Thanks for your future help
Regards

hi,
Creation of User Accounts
Purpose
This process describes the steps required to create user accounts for secured and controlled access to the Mobile Application Repository (MAR). User accounts are created for consultants, who intend to customize mobile client applications using Mobile Application Studio (MAS). User account allows a consultant to log on to MAS.
Process Flow
       1.      During the installation of MAR, the system enables the User Management feature.
If MAR is upgraded from a release prior to 3.0 to the current release, the User Management feature must be enabled manually by system administrator. This is done by changing the umfrc parameter value to YES in the ARS_SYSTABLE.
       2.      The CRM technical administrator creates a DSN to access MAR by using the default internal login arsdb with password arsdb.
       3.      The CRM technical administrator carries out the following tasks using the User Manager tool of MAS:
                            a.      Creates user accounts.
                            b.      Associates each user account with a standard MAR profile. For more information, see Profiles of the Mobile Application Repository.
                            c.      Specifies a password for each user account.
Login IDs of the Mobile Application Repository
Definition
A login ID is a source through which users log on to Mobile Application Studio, and connect to the Mobile Application Repository (MAR). When MAR is installed, standard login IDs are available by default. While creating user accounts, the system administrator associates a standard login ID with the profile of each user account.
Structure
Login ID
Allows you to:
ARSAdmin
·        Perform administrative activities in MAR.
·        Create and modify development objects in MAR.
·        Modify the password of a user account.
ARSDeveloper
·        Create and modify development objects in MAR.
·        Modify your own password.
ARSUser
·        View development objects in MAR.
·        Modify your own password.
ARSSys
·        Get information about the MAR.
·        Validate MAR users.
ARSdb
Create a DSN for MAR. The default password for this login is arsdb.
Profiles of the Mobile Application Repository
Definition
A profile of the Mobile Application Repository (MAR) is a collection of access rights defined for:
·        Development objects, like tiles, tile sets and business objects of mobile client applications
·        Services of MAR like change lists and namespaces
Structure
The standard profiles that are available are listed below.
Profile name
Associated login ID
Allows you to:
Administrator
ARSAdmin
·        Perform administrative activities like creating and maintaining users.
·        Read and write repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release and revert a change list.
·        Transfer the ownership of objects to another MAR.
·        Create link objects to integrate tile set help.
·        Create and modify framework objects in MAR.
ROGuest
ARSUser
·        View development objects in MAR.
·        Modify your own password.
Developer
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release change lists that have been created only by you.
·        Modify your own password.
·        Transfer the ownership of objects to another MAR.
SPDeveloper
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Modify your own password.
·        Create and modify development objects in MAR.
This profile does not allow you to release change lists.
QMResponsible
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Modify your own password.
·        Transfer the ownership of objects to another MAR.
·        Release and revert change lists.
This profile does not allow you to create a change list.
Coordinator
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release and revert change lists.
·        Modify your own password.
·        Transfer the ownership of objects to another MAR.
Frwkuser
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release the change list you have created.
·        Transfer the ownership of objects to another MAR.
·        Create and modify framework objects in MAR.
Infodeveloper
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release the change list you have created.
·        Create link objects to integrate tile set help.
thanks
karthik
ifhelpfull reward me some points

HOW TO CREATE LOCAL USER PROFILE

SIR,
OS - WINDOWS SERVER 2008 R2
SYSTEM - IBM MACHINE X3400 SERIES
1. HOW TO CREATE A USER IN WINDOWS SERVER 2008 R2 WITHOUT ACTIVE DIRECTORY
2. AFTER CREATE USER IN WINDOWS SERVER 2008 R2 BUT USER PROFILE NOT CREATE .

Hi,
>>1. HOW TO CREATE A USER IN WINDOWS SERVER 2008 R2 WITHOUT ACTIVE DIRECTORY
>>2. AFTER CREATE USER IN WINDOWS SERVER 2008 R2 BUT USER PROFILE NOT CREATE
Creating an user account on the computer doesn't create a profile for that user. The profile is created the first time the user interactively logs on at the computer. After the user logs onto the computer for the first time, the user's local profile
will be created in a folder with the name of the user under the systemroot/Users folder.
Best regards,
Frank Shen

How to create a user y which will have the same content of existing user x

how to create a user y which will have the same content of existing user x ,
like all the tables,procedures,functions and packages

You can do the following.
1. Use CREATE USER to create the new account/schema
2. Use exp to export old schema
3 Use imp with fromuser=<old user> and touser=<newuser>

Question: How to create new user and schema in 11g?

Who can give me answer how to create a new user and schedule?
I had installed oracle 11g DB and oracle client in my windows OS. I found in the 11g there is no enterprise manager console with new version. It is different from with oracle 10g.So i don't know how to create it new user.
I had created new DB instance, but i don't how to create a user on that. Who can give me a hand for that? I hope one oracle experenice expert give my answers.
Thanks a lot!
Edited by: user774630 on Oct 27, 2008 10:01 PM
Edited by: user774630 on Oct 27, 2008 10:09 PM

Hi,
I am not sure that which option you are talking about? Are you using the EMCA,http://download.oracle.com/docs/cd/B28359_01/server.111/b28319/emca.htm#SUTIL800] to create the new repository for the EM? If not the command line than the other only way is to use DBCA(Database Configuration Assistant).I believe you are talking about that. Yes ,if the message is coming creating the repository than after wards you can login to the EM. You would get the port no of the EM's HTTP port from the $OH/install/portlist.ini file.
HTH
Aman....
Edited by: Aman.... on Oct 28, 2008 11:36 AM
Gave up, link insertion doesn't work.

How to create an user input variable in SEM-BPS?

Hi,
anyone please guide me how to create an user input variable in SEM-BPS? I want to utilized user input variable to udpate characteristic with repost function.
I tried to create in planning folder, variables right-click create, but the system said 'operation cannot be executed here'...
please help....
thanks.

Hi Bindu,
would you give me one more help,
I want to use the variable created for a repost process, how do I achieve that?
My scenario:
- There will be a repost function on the planing folder
- User can select a row or many rows then click the repost function button, then a popup window will appear for user to input the value for the variable
Is it possible with the scenario? Please advise if I can use standard repost function or should i create a FOX or exit function for this purpose.
thanks.

How to create Infoset&user group query--(query report)

Hi Guys,
how to create Infoset&user group query--(query report),
Pls send me the exact procedure with Example....
Regards:
Kumar .G

goto SQ03 and create an User Group If U want to create Ur Own.
Goto SQ02 to create Ur Infoset by Giving Logical database name or Simple Database table
Then Choose What ever data U need to be included in The Qurey in field Groups.
Then Generate the Infoset
Now Assign the infoset to user group
Now goto SQ01 and Click on Other user group Button and choose Ur user Group.
Then in the USer group select Ur Infoset and then create Ur own Query and save this.
Now select the infoset query and goto More functions under Query menu and Generate report name.
Now Create a transaction code for the report name generated.
Now use the Tcode.
Hope U have got the basic idea of creating Queries.
~BiSu

How to Create Internet user with email id as user id

Similar Messages

Maybe you are looking for