How to create JDeveloper Extension for new Projects ??

I want to create a JDeveloper Extension for creating new project with following: (11gR2)
1. Maven Support
2. pre-defined dependencies in pom.xml
3. pre-defined project feature (e.g. ADF Business Components)
4. pre-defined Custom Base classes for ADF Business Componets
Are there any documents / samples that i can reference ?!

Some of these can be added declaratively using the template_hook in the extension.xml file and defining an application and project template. Others will need to be added directly.
1. Add Maven Support
This can be added declaratively, as technology in the project template hook.
2. pre-defined dependencies in pom.xml
This is going to need to be added to your project after it's created.
3. pre-defined project feature (e.g. ADF Business Components)
Same as Maven support.
4. pre-defined Custom Base classes for ADF Business Componets
You should be able to use the library hook for this, but I'm not quite clear on what this means.
Here is an example template-hook that describes the creation of a Maven Application and the Maven Project that will be included with it. The <template-hook> element is placed inside the <triggers> section of the extension.xml file in 11gR2 (this won't work in 11gR1). This template-hook is what makes the Maven Application item show up in the New Gallery. Take a look at how that New Maven Application process works, and then look over this example. The <technologyKey> setting what adds the features to your application/project. In the example below, the Maven feature is being added to the project. The technologyKey for ADF Business Components is "ADFbc"
The commented out lines below are either just comments, or they are optional elements for the project and application template hooks. It's pretty obvious which is which.
     <template-hook>
        
        <projectTemplate>
          <templateId>mavenProjectTemplate</templateId>
          <name>Maven Project Template</name>
          <description>${MAVEN_PROJECT_TEMPLATE_DESCRIPTION}</description>
          
          
          
          
          
          <projectName>mavenProj</projectName>
          
          <technologyScope>
            <technologyKey>Maven</technologyKey>
          </technologyScope>
        </projectTemplate>
        
        <applicationTemplate>
          <templateId>#mavenApplicationTemplate</templateId>
          
          <name>Maven Application</name>
          <description>${MAVEN_APPLICATION_TEMPLATE_DESCRIPTION}</description>
          
          <weight>1.0</weight>
          <icon>/oracle/javatools/icons/application.png</icon>
          
          <unsorted>false</unsorted>
          <applicationName>MavenApp</applicationName>
          
          <projectTemplates>
            <projectTemplate>
              <templateId>mavenProjectTemplate</templateId>
              
              
              
              
              
              <technologyScope>
                <technologyKey>Maven</technologyKey>
              </technologyScope>
            </projectTemplate>
          </projectTemplates>
        </applicationTemplate>
      </template-hook>For including predefined pom.xml settings, you can either edit the generated pom.xml file after the project is created, or you can add a predefined pom.xml file to the project. You can see more about working with files in a project on the [url https://blogs.oracle.com/jdevextensions/tags/files] JDev Extensions Blog
Not quite sure what you are looking to do with the last item. If it's libraries that you're looking to add, you can take a look into the <libraries> hook.
Staying with the Maven example... Here is a partial <libraries> element
      <libraries xmlns="http://xmlns.oracle.com/jdeveloper/1013/jdev-libraries">
        <library name="Apache Maven 3.0.3">
          <classpath>../../apache-maven-3.0.3/lib/maven-aether-provider-3.0.3.jar</classpath>
           <classpath>../../apache-maven-3.0.3/lib/maven-artifact-3.0.3.jar</classpath>
       <classpath>../../apache-maven-3.0.3/lib/maven-compat-3.0.3.jar</classpath>
       <classpath>../../apache-maven-3.0.3/lib/maven-core-3.0.3.jar</classpath>
       <classpath>../../apache-maven-3.0.3/lib/maven-embedder-3.0.3.jar</classpath>
       <classpath>../../apache-maven-3.0.3/lib/maven-model-3.0.3.jar</classpath>
        </library>
      </libraries>Hope all of this helps, Please feel free to contact me directly via email if that would help you out. john<dot>brock<AT>oracle.com
--jb

Similar Messages

How to create an extension for generated type idoc

Hi all,
Can u please look into this
How to create an extension for generated type idoc ? for example Idoc type BATMAS02

Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
- Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
- Click on Create new and enter a description and press enter.
- Click on ZIDOCTYPE01 and then on the Create icon.
- Enter ZIDOCTYPE as the segment type, click on Segment Editor.
- Enter a description for your segment type and create.
- Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
- Save and generate, press back
- To release the segment choose Goto, Release from the menu.
- Check the box on the line of your segment.
- Save, back and enter.
- Your Idoc type structure should be displayed with your new segment.
- Save and back.
- To release the Idoc type choose Extras, Release type from the menu and Yes.
ALE FUNCTION MODULE ENHANCEMENTS
Having extended the IDOC type to contain additional fields for an inbound or outbound application, you now want to enhance ALE function modules for populating the additional segment on the outbound or applying the additional segment data on the inbound application.
The core working code for ALE processes for a given application area is always encapsulated in ABAP/4 function modules. These function modules are associated with such control information as message types and process codes. So the ALE process checks this control information and derives the name of the function module to invoke for that particular IDOC processing from certain database tables. These function modules contain objects known as customer functions, which can be considered SAP Enhanced user exits. A function module is called at a particular point during the processing of the main program or function module, and it can be used to influence data processing at that point by adding code to the customer function. The customer function behaves like a normal function module and has import and export parameters, tables (internal tables) statement, and exception processing. Unlike a conventional user exit, customer functions give you the ability to modify only data available to you by the function moduleâs parameters and internal tables. While most ALE/EDI function modules are supported by customer functions, there are ALE/EDI processes that still use conventional user exits. There are a few ways to determine which function module to enhance for a given message type/process code:
For master data distribution, from SALE go to Extensions -> Master data distribution -> Setup additional data for message types. Search for message type DEBMAS in this example. You see an entry for DEBMAS associated with function module MASTERIDOC_CREATE_SMD_DEBMAS. This data is stored on table TBDME. The function module names for all master data message types follow this pattern: MASTERIDOC_CREATE_SMD_messagetype. This function module calls another function module of name MASTERIDOC_CREATE_DEBMAS or MASTERIDOC_CREATE_messagetype. Search for the words customer function, and you find several hits that can be used to add code to the function module.
From WEDI got to Control -> Inbound process codes -> Inbound with ALE service -> Processing by function module (transaction WE42), or from WEDI go to Control -> Outbound process codes -> Outbound with ALE service -> With function module (transaction WE41). There will be function modules associated with the process codes. For inbound, the function modules usually follow this pattern: IDOC_INPUT_messagetype: for example, IDOC_INPUT_CHRMAS for inbound characteristics master.
Use transaction WE57 or from WEDI go to Development -> Message/Application Object. The entries list the function module, Business Object, message type, and IDOC type that are used for inbound ALE/EDI interfaces.
Customer functions are not specific only to ALE and EDI but also to all programs/modules in SAP R/3. Customer function is a SAP enhancement component; the other two types are menu and screen enhancements.
All customer function exits are maintained in SAP enhancements and are found by using transaction SMOD. After executing transaction SMOD, pull down (F4) on the enhancement name field, and execute again. This provides you with a list of all SAP enhancements available. SAP enhancements are grouped by development class pertaining to an application area. Choose Application development R/3 SD master data distribution for development class VSV to lead to a screen that lists VSV00001 as an enhancement (see Figure 5). Press Component +/- to display its function exit components. There are four possible components listed, all of which are function exits (and are function modules) that are called from the ALE function modules in the form Call Customer Function Î001â. This is a special occurrence of the ABAP statement Call. Go to item Exit_SAPLVV01_ 001, which you need to enhance for the Customer Master outbound example of an IDOC extension. In the ALE-function module MASTERIDOC_CREATE_DEBMAS, the statement CALL Customer Function 001 is translated in the background to call component EXIT_SAPLVV01_001. Although this function exit can be edited using transaction SE37, you will use a simpler approach.
When you use SAP enhancements and their components, you manage them with an SAP object known as a project, which is like an envelope containing the selected enhancements and their components. A project can be used to control the execution of components and to transport them to other clients and instances in SAP. Basically, the process involves creating a project, including enhancements and components that are to be enhanced, editing the components, and then activating the project. The following process creates a project for our example Customer Master IDOC extension:
Execute transaction CMOD.
Enter name of project, say CSTMAST1.
Click on Create.
Enter a description of the project.
Save.
Click on SAP Enhancements.
Enter VSV00001 for Enhancement.
Save.
Once youâve created the project, edit the function exit components and activate the project. Remember that the code in the function exit enhancement will execute only if the project is activated. In fact, this is a convenient SAP enhancements feature, whereby the work in progress (developing code in the customer function) will not affect users of that application. When the code is completed, the project can be activated so the enhanced functionality takes effect. It can also be deactivated for maintenance.
As mentioned earlier, customer functions (function exits) are embedded in ALE function modules and can be used to influence the creation and modification of IDOC data on an outbound application or to post additional or modified IDOC data to an inbound R/3 application. Function exits are similar to regular function modules, with import/export parameters, tables (internal tables), and exceptions.
The two important factors to consider while developing the customer function are:
1. The point in the ALE function module where the function exit occurs
2. The data made available by the customer function that can be modified or posted to the R/3 application, based on the direction.
Because some function modules have several customer functions, it is critical to choose the function exit best suited for that particular enhancement. Do not attempt to perform activities that the function exit is not designed for. The importance of this point is illustrated by the following description of enhancing function modules for outbound and inbound ALE interfaces.
Outbound interfaces. In an outbound ALE interface you use function exits (customer functions) to populate additional segments created by an IDOC extension or to modify the existing IDOC data segments as per business requirements. Previously, you identified that enhancement VSV00001 has a component EXIT_SAPLVV01_001 (function exit), which can be used for populating the additional data segment Z1SADRX that you created in the IDOC extension ZDEBMASX (IDOC type ZDEBMASZ, based on Basic IDOC type DEBMAS02). You also learned that the ALE function module that calls this function exit is MASTERIDOC_CREATE_DEBMAS, which has a statement Call Customer Function 001.
Browse the function module MASTERIDOC_CREATE_DEBMAS using transaction SE37. You will find that this customer function is invoked for every segment of IDOC type DEBMAS02. In fact, the function exit is called soon after the creation of an existing segment has been populated with data and appended to the IDOC data table (internal table). Also, the function exit is exporting the message type, IDOC type, and the segment name and is importing the IDOC extension type. It is also passing the IDOC data internal table. This indicates that the ALE function module is allowing you to populate additional segments for every existing segment and modify the existing segmentâs data.
Letâs write ABAP/4 code to accomplish the task of populating IDOC segment Z1SADRX with a contact personâs business address:
From SE37, display function module MASTERIDOC_CREATE_ DEBMAS.
Find Customer Function 001.
Double-click on 001.
The function EXIT_SAPLVV01_001 will be displayed.
Double-click on INCLUDE ZXVSVU01.
You will be asked to create a new include object. Proceed as desired.
Enter code (as in Listing 1).
Be sure to perform a main program check (Function Module -> Check -> main program) and extended program check (Function module -> Check -> Extended check).
Now that you have extended the IDOC and enhanced the ALE function module based on the requirements for the contact personâs business address on the Customer Master, letâs test the interface. You should create a logical system and define a port for this interface. You should also configure the Customer Distribution Model to indicate that message type DEBMAS is being distributed to this logical system. The only difference in configuration between a regular outbound ALE interface and an enhanced one is the partner profile definition. While maintaining the outbound parameters of the partner profile, make sure the IDOC type is ZDEBMASZ. The fields for Basic IDOC type and extension type are automatically populated with DEBMAS02 and ZDEBMASX, respectively.
To maintain the contact personâs business address of a customer:
Use transaction BD12 or from BALE go to Master Data ->Customer -> Send and send that Customer Master record by executing the transaction after filling in the relevant fields such as customer number, message type, and logical system.
Use transaction WE02 or WE05 to verify the IDOC created. You should see the new segment Z1SADRX populated with the correct data.
With SAP releases below 4.5B, you cannot capture changes to business address through change pointers because a change document object is not available for capturing business address changes, and also earlier releases have not been configured to write change documents for a contact personâs business address. If you would like this functionality, you can either create change document objects, generate function modules to create change documents, and perform ALE configuration to tie it in, or make a cosmetic change to the contact person screen data while changing the contact personâs business address so that it gets captured as a change to the Customer Master. Subsequently, the ALE enhancement that you performed captures the contact personâs business address.
Inbound interfaces. The process for enhancing inbound ALE interfaces is similar for outbound, with a few exceptions; specifically in the coding of customer functions (function exits) for the ALE/EDI function modules.
The first step is to create an IDOC extension for the specific Basic IDOC type by adding new segments at the appropriate hierarchy level: that is, associated to the relevant existing segment. Populate the data fields on the new segments with application data by the translator or external system/program before importing them into the R/3 System. Then, find the ALE function module that is invoked by the inbound processing. By browsing through the code or reading the documentation on the function exit enhancements using the SMOD transaction, identify the function exit in which you should place your code. The technique used in the code to post the additional or modified IDOC data to the application can vary based on the application rules and requirements, the data available at that point in processing, and the application function modules available to update the application tables. It is important to search first for application modules that process the data and see if they can be called within the function exit. If the additional data in the extended segments in specific to a custom table or resides in nonkey fields of a single or small set of tables, you may be able to update it directly by SQL statements in the function exit. This approach should be carefully evaluated and is certainly not highly recommended.
Another option is to use Call Transaction from within the function exit to process the additional data. For example, in the case of message type WMMBXY for inbound goods movements from a warehouse management system, the standard interface creates batches for materials, but does not update its characteristics. In such a case, you can use Call Transaction MSC1 to create the batch and assign characteristic values to it from within the function exit provided.
regards,
srinivas

How to create a validation for the project coding mask

Hi,
Would just like to ask how to create a validation for the project coding mask wherein the WBS elements hierarchy will be checked against the template saved. For example,
project coding mask is XXXX-XXXXX-XX-X-X-X-00-X
mother WBS should be XXXX-XXXXX-X and lower level WBS would be XXXX-XXXXX-XX.
The validation should not allow a mother WBS to be XXXX-XXXXX-XX.
How can we go about this?

Hi Jacquiline Bersamin,
You can use validation with the combination of the level and the coding mask.
In the validation:
Pre requisite: WBS level = 1
Validation: Prps-posid = prps-posid :1-12:
Message : Error
If required you can give the parameters for your detail error message.
Please let me know if this does not work.
Thanks
Regards
Srinivasan Desingh

Tutorial or instruction s on how to create an extension for dreamweaver

Can some body please point me to a tutorial or instructions on how to create an extension for dreamweaver
I used to create extension for flash few years ago. It was quite straight forward, but not for dreamweaver any help will be appreciated.

Take a look at:
Extending Dreamweaver Help - http://help.adobe.com/en_US/Dreamweaver/10.0_Extending/
API Documentation - http://help.adobe.com/en_US/Dreamweaver/10.0_API_Ref/index.html

How to create a notification for new virtual machines created on Hyper-v Using SCOM or another way?

Hi ,
We need to to create a notification for new virtual machines created on Hyper-v Using SCOM or another way
thanks

http://sincealtair.blogspot.com/2010/04/how-to-ask-questions-in-technical-forum.html
Not nearly enough information.
If you are asking about SCOM, it is better to ask in the SCOM forum -
http://social.technet.microsoft.com/Forums/en-US/home?forum=operationsmanagergeneral
.:|:.:|:. tim

How to create an extension for firefox in android,i have already an android application and i want lunch it from mobile firefox, how to get started please?

I want create an extension for fennec (mobile firefox) in android, i have already an android application and i want lunch it from mobile firefox, by tapping a button that i will add to the user interface of mobile firefox web browser, is this this possible?

see: https://wiki.mozilla.org/Mobile/Fennec/Extensions
https://developer.mozilla.org/en/Building_an_Extension
https://wiki.mozilla.org/Mobile/Fennec/Extensions/BestPractices
good luck
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

How to create Document Structure for existing project in Solution Manager

Hi gurus
We have all the project document saved using Solution manager . we have ended with Phase1.
We are starting Phase2 and they are asking me to creat different folder as Phase to in existing project and store all the Documents
Can any one please tell me how to create New folder and store the documents in Existing project
Point will given for helpfull Answer
Thanks
Bhaskar

Hi Bhaskar,
Assuming you have full authorisations, the procedure is simple.
Please go SOLAR_PROJECT_ADMIN transaction.
From the menu please select Project -> Copy
In the ensuing screen, key in your desired project name, scroll through the other checkboxes to see if you are happy with the default choices; if not, take corrective actions.
In the last set of radi buttons "Desired behaviour at later version comparison", the default choice (2nd entry there - Adjust target project to the original of the source project) is fine.
From your scenario, since you do not have a Template -> Implementation Project functionality and instead are copying from one Implementation to the other, this radio button is of little consequence.
Execute the process.
In the window that comes up, please choose Local Object, assuming that you do not want to capture the whole contents into a 'Transport'. This is more required if you are aiming to copy the project from one SolMan instance to another.
It would give an information message "Generating in batch job (Name ......)
In a few minutes, you'd receive an intimation of the Project being copied.
That's pretty much about it. Have a check on the newly created project in SOLAR01.
Please let me know if you have any doubts.
Best regards,
Srini

How to create License file for New ADDON.

Hi,
Can any one tell me steps to create license file for any addon which is developed in VB.NET.
Regards ,
Ganesh

Hi,
The license system for addons is working fine for a long time now. The date of January 2005 now changed to 2007 or 2008 is only the date until when you can work without the AddOnIdentifier (we give some extra time for the addons to migrate to the new system).
If you use the AddOnIdentifier then you have to ask for a LicenseKeyName to SAP to create your solution AddOnIdentifier. Then your clients to be able to run your addon will need a specific license in their file corresponding to your licenseKeyName (when you ask for a license file you can ask for different partners addons licenses). The system is up and running for a long time now.
What problems are you having with it? I cannot see your point.
Regards
Trinidad.
Hope it helps

How to create custom BAPI for a project on Agentry?

As I am very new to BAPI creation, I would like to get some helpful pdf documents or links for creating custom BAPIs, which would fetch data for an Agentry Project to be build.
Tags edited by: Michael Appleby

Rajkamal,
I would recommend you work through the following tutorial on how to build an Agentry application from scratch. It covers creating a BAPI to retrieve data from the SAP backend to Agentry.
Part 1 - http://scn.sap.com/docs/DOC-47550
Part 2 - http://scn.sap.com/docs/DOC-47651
--Bill

How to Create Executable file for a project for Crio Platform

hi,
i am using CRIO 9014 platform for my application development.
i am controlling ( Reset & then Run ) FPGA from RT application .
Through TCP/IP communication the Acquired data ( from FPGA then followed by some Computation Logic in RT ) is sending to HOST computer .
during the above process
First i am starting the RT Application ( the TCP network will be continuously in listen mode ) then
i am starting my HOST Application in the project .
here i want to build my complete project as an executable file
so that i no need to start RT Application first and then HOST Application.
Could you please send me One sample Project with built in simple ADC Acquisition loop / logic in FPGA , then one sample logic / while loop in RT to acquire this ADC data from FPGA and send to HOST via TCP/IP network then the HOST with GUI for Display in the HOST .
This complete project should be build in .exe file .
Please complete project files and .exe file as a zip file.
Regards,
Venkat

Hi,
I might be confused but what I understand from what you have mentioned is that you want to create a project having two VI's. One running on your FPGA target and another running on you host computer.You want to build a single executable file to complete the entire operation.
Unfortunately you cannot have both VI's in same executable file. You can build one executable file and deploy on your FPGA target that will start running as soon as the target is booted. And you can create another executable file for running VI on your host computer. And instead of using TCP to transfer data, you could use "Interface FPGA" from FPGA module to communicate between your host computer and communicate.

How to create BSP extension for ranges

Hi Experts,
I am trying to create a ranges like selection option means when we click on SAP ABAP selection option, it shows us the all possible option like eqal to, not equal to etc.
I have found a link as "/people/thomas.jung/blog/2006/01/13/custom-bsp-extensions-time-stamp-and-range-ui-elements but there is no step by step procedure for the same. Please help me out to provide the steps.
Thanks.
Jaten Sangal

Hi Jaten,
In the Blog you mentioned, there are links for the articles/code samples at the end.
quick link for the same is
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1e324092-0801-0010-a181-c8b0c54119e3?quicklink=index&overridelayout=true
Regards,
Ravi

How to create xpi file for my own extension?

I have created my own extension and directly added profile extension folder in my system.its working fine. but while installing extension using .xpi file its produce error "Install script not found
-204".Please explian me how to create .xpi file for my extension folder.
I hope you can help this issues.
Thanks in advance.
Regards
vasanthi

See this:
https://developer.mozilla.org/en/Building_an_Extension

How to create db conn for JDBC-ODBC Bridge for MS Access in ADF APP?

Sir,
How to create db conn for JDBC-ODBC Bridge for MS Access in ADF APP?
Regards

Hello Every Body!
I succeeded in getting connect to the ms access database in adf application in jdeveloper as below:
First in control panel to to admin tools and go to data source(odbc) and create system dsn as bellow pic
Then go to jdeveloper resources ide conn and then database and new database conn and then select jdbc-odbc briddge and then give custom jdbc url as bellow pic
Cheers
tanvir

How to create a copy of a project

We are using RoboHelp HTML version X5, and we use version
control. We are trying to figure out how to create a copy of a
project so we can edit the new version with the old version
remaining intact. That way we could have multiple versions of our
help system, a distinct version for each software release we have.
Thanks.

The way I do it is rather simple.
1.       Copy the local RoboHelp project to a new location.
2.       Remove the link to source control. (See http://www.robowizard.com/RoboWizard/MonthlyScry/102004.htm on how to do this without opening RoboHelp. Please follow these instructions.)
3.       Open the RoboHelp project and add it to source control as a new project.
By creating a copy of the entire project directory, ALL the content is retained.
Greet,
Willam

How to create transaction code for maintenance view

hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.

Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful.

How to create JDeveloper Extension for new Projects ??

Similar Messages

Maybe you are looking for