How to create new group for material type

Hello all experts,
Im unable to create a new group for materials types, diff groups for FG and raw materials material type??
Could you pls help ??
Thanks in advance.

Hi
When you create a new material you have to specify the material types like finished goods or raw material like that in the initial screen
For this new material types can be defined in
SPRO -> Logistic - General -> Material Master -> Basic Settings -> Material Type ->Define attribute of material Type
T code OMS2
After specifying the material type and giving organizational data like plant, storage location,sales org etc we go on to create the material
In one of the tabs the material groups should be specified and from MM point of view it is a reqd entry
this can be defined in
Define Material Group
SPRO -> Logistic - General -> Material Master -> Setting for Key Field -> Define Material Group
T .Code: OMSF
I beleive this is what you are asking about
Regards
Raja

Similar Messages

How to create new version for material

Hi expert,
Can anyone please guide me step by step on how to create new version for material and vendor? Please also mention transaction and details step by step.
Thanks

HI,
Do you mean to have version management for purchasing documents?.
Best Regards,
Arminda Jack

Creating Authorization groups for material types

Hi All,
I have a requirement to create Authorization groups for different material types we have in our company. Basically these are intended to restric the users from accessing the material master. Different material types needs to be assigned to differnt group of users.
So if we can create couple of Authorization groups, then I am thinking of assigning the material types to these groups.
I went to SPRO---Logistics general ---Material master -
Tools --- Maintain authorization and authorization profiles. TCODE : PFCG
Is this the right path?
Please advise
Shane

Hi All,
I don't think SPRO---Logistics general -Material master- Tools --- Maintain authorization and authorization profiles is the right path to create new authorization groups.
Can anyone explain how to create new authorization groups for different material types. The purpose is to create a role and assign this auth. group to this role and provide that security role to specific users.
Regards
Shane

How to create new structure for SOP?

How to create new structure for SOP? and transfer data for long term planning?

hi dear
For SOP there are two types
1. Standard SOP : this the standard SOP configured by SAP consider the Level by Level planning and planning done for product group .
2. Flexible planning SOP: this option is given, so that Rough planning/SOP planning can be done as per the client requirement.e.g planning structure can be sales orgn., distribution channel, division, plant, material
For configuring the flexible planning SOP follow steps
1. Define info structure in IMG
where u define the characteristic and Key field
2. Set parameters for info structures and key figures
Sales & Operations Planning >Master Data>Set parameters for info structures and key figures
where u define Planning method
Consistent planning
Level-by-level planning
Delta planning
and aggregation type
1. Average calculated
2. Total created
3. No aggregation
3. create Planning type with reference to info structure
Regards
Suresh

How to create an extension for generated type idoc

Hi all,
Can u please look into this
How to create an extension for generated type idoc ? for example Idoc type BATMAS02

Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
- Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
- Click on Create new and enter a description and press enter.
- Click on ZIDOCTYPE01 and then on the Create icon.
- Enter ZIDOCTYPE as the segment type, click on Segment Editor.
- Enter a description for your segment type and create.
- Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
- Save and generate, press back
- To release the segment choose Goto, Release from the menu.
- Check the box on the line of your segment.
- Save, back and enter.
- Your Idoc type structure should be displayed with your new segment.
- Save and back.
- To release the Idoc type choose Extras, Release type from the menu and Yes.
ALE FUNCTION MODULE ENHANCEMENTS
Having extended the IDOC type to contain additional fields for an inbound or outbound application, you now want to enhance ALE function modules for populating the additional segment on the outbound or applying the additional segment data on the inbound application.
The core working code for ALE processes for a given application area is always encapsulated in ABAP/4 function modules. These function modules are associated with such control information as message types and process codes. So the ALE process checks this control information and derives the name of the function module to invoke for that particular IDOC processing from certain database tables. These function modules contain objects known as customer functions, which can be considered SAP Enhanced user exits. A function module is called at a particular point during the processing of the main program or function module, and it can be used to influence data processing at that point by adding code to the customer function. The customer function behaves like a normal function module and has import and export parameters, tables (internal tables) statement, and exception processing. Unlike a conventional user exit, customer functions give you the ability to modify only data available to you by the function moduleâs parameters and internal tables. While most ALE/EDI function modules are supported by customer functions, there are ALE/EDI processes that still use conventional user exits. There are a few ways to determine which function module to enhance for a given message type/process code:
For master data distribution, from SALE go to Extensions -> Master data distribution -> Setup additional data for message types. Search for message type DEBMAS in this example. You see an entry for DEBMAS associated with function module MASTERIDOC_CREATE_SMD_DEBMAS. This data is stored on table TBDME. The function module names for all master data message types follow this pattern: MASTERIDOC_CREATE_SMD_messagetype. This function module calls another function module of name MASTERIDOC_CREATE_DEBMAS or MASTERIDOC_CREATE_messagetype. Search for the words customer function, and you find several hits that can be used to add code to the function module.
From WEDI got to Control -> Inbound process codes -> Inbound with ALE service -> Processing by function module (transaction WE42), or from WEDI go to Control -> Outbound process codes -> Outbound with ALE service -> With function module (transaction WE41). There will be function modules associated with the process codes. For inbound, the function modules usually follow this pattern: IDOC_INPUT_messagetype: for example, IDOC_INPUT_CHRMAS for inbound characteristics master.
Use transaction WE57 or from WEDI go to Development -> Message/Application Object. The entries list the function module, Business Object, message type, and IDOC type that are used for inbound ALE/EDI interfaces.
Customer functions are not specific only to ALE and EDI but also to all programs/modules in SAP R/3. Customer function is a SAP enhancement component; the other two types are menu and screen enhancements.
All customer function exits are maintained in SAP enhancements and are found by using transaction SMOD. After executing transaction SMOD, pull down (F4) on the enhancement name field, and execute again. This provides you with a list of all SAP enhancements available. SAP enhancements are grouped by development class pertaining to an application area. Choose Application development R/3 SD master data distribution for development class VSV to lead to a screen that lists VSV00001 as an enhancement (see Figure 5). Press Component +/- to display its function exit components. There are four possible components listed, all of which are function exits (and are function modules) that are called from the ALE function modules in the form Call Customer Function Î001â. This is a special occurrence of the ABAP statement Call. Go to item Exit_SAPLVV01_ 001, which you need to enhance for the Customer Master outbound example of an IDOC extension. In the ALE-function module MASTERIDOC_CREATE_DEBMAS, the statement CALL Customer Function 001 is translated in the background to call component EXIT_SAPLVV01_001. Although this function exit can be edited using transaction SE37, you will use a simpler approach.
When you use SAP enhancements and their components, you manage them with an SAP object known as a project, which is like an envelope containing the selected enhancements and their components. A project can be used to control the execution of components and to transport them to other clients and instances in SAP. Basically, the process involves creating a project, including enhancements and components that are to be enhanced, editing the components, and then activating the project. The following process creates a project for our example Customer Master IDOC extension:
Execute transaction CMOD.
Enter name of project, say CSTMAST1.
Click on Create.
Enter a description of the project.
Save.
Click on SAP Enhancements.
Enter VSV00001 for Enhancement.
Save.
Once youâve created the project, edit the function exit components and activate the project. Remember that the code in the function exit enhancement will execute only if the project is activated. In fact, this is a convenient SAP enhancements feature, whereby the work in progress (developing code in the customer function) will not affect users of that application. When the code is completed, the project can be activated so the enhanced functionality takes effect. It can also be deactivated for maintenance.
As mentioned earlier, customer functions (function exits) are embedded in ALE function modules and can be used to influence the creation and modification of IDOC data on an outbound application or to post additional or modified IDOC data to an inbound R/3 application. Function exits are similar to regular function modules, with import/export parameters, tables (internal tables), and exceptions.
The two important factors to consider while developing the customer function are:
1. The point in the ALE function module where the function exit occurs
2. The data made available by the customer function that can be modified or posted to the R/3 application, based on the direction.
Because some function modules have several customer functions, it is critical to choose the function exit best suited for that particular enhancement. Do not attempt to perform activities that the function exit is not designed for. The importance of this point is illustrated by the following description of enhancing function modules for outbound and inbound ALE interfaces.
Outbound interfaces. In an outbound ALE interface you use function exits (customer functions) to populate additional segments created by an IDOC extension or to modify the existing IDOC data segments as per business requirements. Previously, you identified that enhancement VSV00001 has a component EXIT_SAPLVV01_001 (function exit), which can be used for populating the additional data segment Z1SADRX that you created in the IDOC extension ZDEBMASX (IDOC type ZDEBMASZ, based on Basic IDOC type DEBMAS02). You also learned that the ALE function module that calls this function exit is MASTERIDOC_CREATE_DEBMAS, which has a statement Call Customer Function 001.
Browse the function module MASTERIDOC_CREATE_DEBMAS using transaction SE37. You will find that this customer function is invoked for every segment of IDOC type DEBMAS02. In fact, the function exit is called soon after the creation of an existing segment has been populated with data and appended to the IDOC data table (internal table). Also, the function exit is exporting the message type, IDOC type, and the segment name and is importing the IDOC extension type. It is also passing the IDOC data internal table. This indicates that the ALE function module is allowing you to populate additional segments for every existing segment and modify the existing segmentâs data.
Letâs write ABAP/4 code to accomplish the task of populating IDOC segment Z1SADRX with a contact personâs business address:
From SE37, display function module MASTERIDOC_CREATE_ DEBMAS.
Find Customer Function 001.
Double-click on 001.
The function EXIT_SAPLVV01_001 will be displayed.
Double-click on INCLUDE ZXVSVU01.
You will be asked to create a new include object. Proceed as desired.
Enter code (as in Listing 1).
Be sure to perform a main program check (Function Module -> Check -> main program) and extended program check (Function module -> Check -> Extended check).
Now that you have extended the IDOC and enhanced the ALE function module based on the requirements for the contact personâs business address on the Customer Master, letâs test the interface. You should create a logical system and define a port for this interface. You should also configure the Customer Distribution Model to indicate that message type DEBMAS is being distributed to this logical system. The only difference in configuration between a regular outbound ALE interface and an enhanced one is the partner profile definition. While maintaining the outbound parameters of the partner profile, make sure the IDOC type is ZDEBMASZ. The fields for Basic IDOC type and extension type are automatically populated with DEBMAS02 and ZDEBMASX, respectively.
To maintain the contact personâs business address of a customer:
Use transaction BD12 or from BALE go to Master Data ->Customer -> Send and send that Customer Master record by executing the transaction after filling in the relevant fields such as customer number, message type, and logical system.
Use transaction WE02 or WE05 to verify the IDOC created. You should see the new segment Z1SADRX populated with the correct data.
With SAP releases below 4.5B, you cannot capture changes to business address through change pointers because a change document object is not available for capturing business address changes, and also earlier releases have not been configured to write change documents for a contact personâs business address. If you would like this functionality, you can either create change document objects, generate function modules to create change documents, and perform ALE configuration to tie it in, or make a cosmetic change to the contact person screen data while changing the contact personâs business address so that it gets captured as a change to the Customer Master. Subsequently, the ALE enhancement that you performed captures the contact personâs business address.
Inbound interfaces. The process for enhancing inbound ALE interfaces is similar for outbound, with a few exceptions; specifically in the coding of customer functions (function exits) for the ALE/EDI function modules.
The first step is to create an IDOC extension for the specific Basic IDOC type by adding new segments at the appropriate hierarchy level: that is, associated to the relevant existing segment. Populate the data fields on the new segments with application data by the translator or external system/program before importing them into the R/3 System. Then, find the ALE function module that is invoked by the inbound processing. By browsing through the code or reading the documentation on the function exit enhancements using the SMOD transaction, identify the function exit in which you should place your code. The technique used in the code to post the additional or modified IDOC data to the application can vary based on the application rules and requirements, the data available at that point in processing, and the application function modules available to update the application tables. It is important to search first for application modules that process the data and see if they can be called within the function exit. If the additional data in the extended segments in specific to a custom table or resides in nonkey fields of a single or small set of tables, you may be able to update it directly by SQL statements in the function exit. This approach should be carefully evaluated and is certainly not highly recommended.
Another option is to use Call Transaction from within the function exit to process the additional data. For example, in the case of message type WMMBXY for inbound goods movements from a warehouse management system, the standard interface creates batches for materials, but does not update its characteristics. In such a case, you can use Call Transaction MSC1 to create the batch and assign characteristic values to it from within the function exit provided.
regards,
srinivas

How to create new scope for SharePoint calendar?

How to create new scope for SharePoint calendar?
I have a calendar list to which I want to create following scopes-
Annual View
Half Year 1 (Jan-June)
Half Year 2 (Jul-Dec)
Quarter 1 (Jan-Mar)
Quarter 2 (Apr-Jun)
Quarter 3 (Jul-Sep)
Quarter 4 (Oct-Dec)
How this can be created. Any help appriciated. Thanks.

Hi Pratima,
Can you please see below link and code snippet for how to
format date in gridview.
http://www.aspdotnet-suresh.com/2011/05/how-to-set-date-format-in-gridview.html
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Gridvew Date format</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:GridView runat="server" ID="gvdetails" DataSourceID="dsdetails" AllowPaging="true" AllowSorting="true" AutoGenerateColumns="false">
<RowStyle BackColor="#EFF3FB" />
<FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<PagerStyle BackColor="#2461BF" ForeColor="White" HorizontalAlign="Center" />
<HeaderStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<AlternatingRowStyle BackColor="White" />
<Columns>
<asp:BoundField DataField="Date1" HeaderText="Date1" HtmlEncode="false" DataFormatString="{0:s}" />
<asp:BoundField DataField="Date2" HeaderText="Date2" HtmlEncode="false" DataFormatString="{0:D}" />
<asp:BoundField DataField="Date3" HeaderText="Date3" HtmlEncode="false" DataFormatString="{0:m}" />
<asp:BoundField DataField="Date4" HeaderText="Date4" HtmlEncode="false" DataFormatString="{0:d}" />
<asp:BoundField DataField="Total" HeaderText="Total" HtmlEncode="false" DataFormatString="{0:C2}" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="dsdetails" runat="server" SelectCommand="select * from DateFormat" ConnectionString="<%$ConnectionStrings:dbconnection %>"></asp:SqlDataSource>
</div>
</form>
</body>
</html>
Hope this will help you.
Regards
Soni K

How to Create New Application for iPhone

Hi,
Can anyone guide me how to create New Applications for the iPhone.
Regards,
Mustafa Ali Qizilbash

If you think Apple's is making a profit off the $99 it collects for the iPhone Developer Program membership, you're badly underestimating how much it costs to run the program.

Do I need to create new group for standby redo log files?

I have 10 group of redo log files with 2 members for each group for my primary database , Do I need to create new group for standby redo log files for the standby database
Group#     Members
==============
1              2
2              2
3             2
4             2
5             2
6             2
7             2
8             2
9             2
10           2
If So, The following statment is correct? or nto
ALTER DATABASE ADD STANDBY LOGFILE GROUP 1 ('D:\Databases\epprod\StandbyRedoLog\REDO01.LOG',D:\Databases\epprod\StandbyRedoLog\REDO01_1.LOG');
please correct me if am doin mistake
becuase when I issue the statment I getting error message sayin the group is already created.

Thanks John
I just find the answer
Yes, it's recomeded to add new group , for instnace If I have 10 group from 1 to 10 then the standby shoudl be from 11 to 20
Thanks I found the answer.

How to create classification view for material?

HI All,
How to create classification view for material? is there any function module?
pls let me know.
Bandi

check the standard include "LCLBPAU14" this is using the following F.M
call function 'BAPI_OBJCL_CREATE'
exporting
objectkeynew = l_object
objecttablenew = l_objecttable
classnumnew = classnum_new
classtypenew = l_classtype
status = status
standardclass = standardclass
changenumber = changenumber
keydate = keydate
no_default_values = no_default_values
importing
classif_status = classif_status
tables
allocvaluesnum = allocvaluesnum
allocvalueschar = allocvalueschar
allocvaluescurr = allocvaluescurr
return = return.

How to create user group for EIS (Executive Information System) KCBA

Dear Experts,
How to create user group for EIS (Executive Information System)
TCode KCBA
Regards
Saurabh

Hi ,
Check the below link ,hope it will give some inputs for creating groups.
http://help.sap.com/saphelp_470/helpdata/en/5c/c1c81c445f11d189f00000e81ddfac/content.htm
Regards
udayakumar.k

How we create Schema group for every vendor?

If we have multiple vendors/transporters, how you configure pricing procedure for each vendor what is the process of creating Schema group for every vendor?
Thanks in advance
Suresh

hi suresh,
you create Pricing procedure, and then you create Vendor schema group; and purchasing schea group.
for your scenario you will create N number of vendor schema groups.
follow this menu path:
spro --> materials management --> purchasing --> conditions --> define price determination process --> Define schema determination --> define caluculation schema for standard purchase orders -->
in that screen:
you maintain entries in the combination of
purchasing org schema group -- vendor schema group -- pricing procedure.
for your scenario, you maintain N number of vendor schema groups and assign it to procing procedure.
hope this may help you,
Regards
srinivas

How to create new groups (list) for storing user's data?

Hi,
I'm using cq-5.4 and I was undertaking the campaign management tutorial which explains about how to send out a weekly news letter. As a part of that I was creating a sign up form for subscribers to fill out. So after filling up that form, user's data would get stored somewhere and eventually that data will be used while sending out the weekly news letters to him.
This was the link I was referring to for that,
http://dev.day.com/docs/en/cq/5-4/wcm/campaigns.html#Create a Sign Up Form
So on that link, the 3rd screenshot talks about how to set the form action. They have for example set the form action to 'Create and Update Account' and accordingly under 'Action Configuration', 'geometrixx newsletter' is assigned as the 'Initial Group'. But they never talked about how to create the 'geometrixx-newsletter' group? Where to create that group etc. Hence, after completing the form when I press submit, nothing happens. In reality whatever data I entered should've got stored in the 'geometrixx newsletter' group.
So that is the place where I'm stuck. Can someone tell me how and where should i create this group?
Thanks!

Hi,
Thank you for posting the screen shots I have been unsuccessful in determining exactly where the problem is coming from. Would it be possible for you to post the actual VI so that I can work with it so see if I can reproduce this issue using your code? In regard to your questions:
1.    You are correct 1000 samples read should write 1000 samples to the table
2.    I believe the discrepancy is due to amount of manipulation done between the read and the file write but I cannot be certain, without the code to work with.
3.    I am unclear as to exactly what is happening. If you are reading empty channels then you may receive erroneous readings this is to be expected. When you connected your accelerometer did you connect in RSE or differential? You can also manipulate the signal range with will affect the gain setting, how off are the readings?
JaceD
Signal Sources Product Support Engineer
National Instruments

HT2523 How do I add shadow to the title of a document while in Pages? For instance: NEW YEAR'S NEEDS. I'm also at a loss to know how to create a folder for certain types of documents such as "Sermons" or "Lessons."

How do I add shadow to a title, such as, NEW YEAR'S NEEDS, while in Pages? I also don't know how to set a new folder for documents of the same type such as, "Sermons," or "Lessons." Any help will be greatly appreciated.
Donnie

Yes, I very well may be over thinking this, but I tried duplicating and moving it, but the text distorts slightly, which can be mostly remedied by rotating it on the x-axis, although the light is still off. And the shadows and reflections are not visible - this is pic1... In pic2, I used "rotate 3d object" with the green and red arrows, instead of just sliding it up the y-axis using the coordinates in the scene tab. Using the green and red arrows to move the text preserved the reflections but the shadows now aren't visible. It was also hard to align the text perfectly in scenario 2. Thanks for the help

Re: How to create new subtypes for OM Custom infotype

Hi Gurus,
I facing problem when creating for Subtypes in OM , i need create Infotyes with Subtypes in OM.Check below steps how i created
1. I create Structure in se11. HRI9119
2. In PPCI , i create infotype 9119
3.In SM30 , I Maintain table T777i, here i selected my infotype (9119), then i clicked on infotype per object type and assign subtype (9229, 9339) to the my infotype .
4. After that, in same screen, i selected my infotype and assign TIME CONSTANT to my all subtype and infotypes.
After this , any think required to maintain , Plz tell me.. i didn't find my subtype in PP01.
Thanks and Regards ,
Venkatesh.M

Hi Venkatesh,
The new subtype has to be maintained in table V_778U.Also you need to relate the new subtype to object type in table T777Z and miantain the time contraints.
Please refer following path in IMG for further information
Personnel Mgt > OM > Basic settings > Data model enhancement
Hope this helps.
Regards,
Malathi V.

How to create authorization groups for G/L Accounting

Hi:
I have a problem with authorizations groups in FI, I hope you could help me.
We want to control access to accounting in FI by authorization group so user only can work with some G/L accounts.
I have seen in transaction FS00, in control data tab, a field called Auth. Group, but I really donu2019t know if this is the right field.
Do you know how I can control access to G/L Accounts by Authorization Groups? Perhaps must I to create a new Authorization Group by roles? We have 4.6c.
Please, any help is welcome.
Thanks in advance.

Hi
Update the authorization group field in the GL master with any user defined value and then include the same in the respective user roles against the authorization object - F_BKPF_BES-BRGRU in PFCG
Ensure you have updated 'Authorization group' for the GL accounts in your chart of accounts
Thank You,

How to create new group for material type

Similar Messages

Maybe you are looking for