How to create own functions in the decision maker for process chains?

I need a further function which is not already implemented and available in the decision maker of the process chains. But I do not know how to implement a new function.
Please give me some help!!!!!

What does the new function need to do?
You may have to create a new process type. There are a few white papers and blogs about different ways of doing this. Needs ABAP knowledge however.
matt

Similar Messages

How to use PROCESS_PARAMETER function in the Decision Maker

Hi mates,
I would really like to know if some of you has already experienced with the "Decision Maker" process (available starting from 7.0 realise). I'm interested to use this process type giving as input a runtime parameter filled in one ABAP program which has been executed before in the same process chain. The input parameter read from the ABAP program will be used in the Decision Maker in order to decide what of next processes will be exectuted.
Example
Let's consider this scenario: the program just wirtes the parameter p in the SAP memory with the ID OPT1, OPT2, OPT3
REPORT ztest08.
PARAMETER p TYPE n.
DATA: prog TYPE sy-repid.
CASE p.
WHEN '1'.
    SET PARAMETER ID 'OPT1' FIELD p.
WHEN '2'.
    SET PARAMETER ID 'OPT2' FIELD p.
WHEN '3'.
    SET PARAMETER ID 'OPT3' FIELD p.
ENDCASE.
For this progam I've created an ABAP process variant called YTEST01 which uses an ABAP variant that is defined with p=1.
Now, in the formula editor of the Decision Maker, I set this code
PROCESS_PARAMETER( 'ABAP', 'YTEST01','OPT1', 'LOW', '        0' ) = 1
Hopefully the Decision Maker should get the parameter p=1 from the SAP memory reached with the ID OPT1. But it doesn't, and it sends me back an error message that some error has occured during the formula.
Note that, in the formula, I left the last parameter blank.
Does someone of you already experienced with Decision Maker using PROCESS_PARAMETER operands?
Thank you very much and best regards,
Matteo
Edited by: Stefano Bertuzzi on Nov 28, 2009 5:19 PM

Hi,
Please check the link below:
Is it possible to start process cain with parameter?
-Vikram

Cancel the scheduled jobs for process chains - urgent

Hi,
How do I cancel the scheduled jobs for process chains which are going to run tonight.
thanks,
Radha

Hello,
Go into transaction code RSPC and then select the particular process chain by going into the edit mode and in the menu...
Look for Execution --> Remove from Schedule.
Let me know if that answered your question.
Thanks
Dharma.

How to create own attributes in the graph.xml of 10g Reports

Hi,
Iam using 10g reports. Iam recreating the graphs in 10g which were created in Graphics builder earlier. While doing that I found lot of features are missing in 10g reports charts wizard. It has only limited number of Graph types when compared to the Graphics builder. Like there is no Curve graph in 10g. The available are Line, Bar and Area. So how can I draw a curve instead of line? 10g Legend looks very ugly. There is lot of space between the values. Is there anyway that I can add my own attributes in the graph.xml and register in the reports?
Please advise.
Thanks.
Ram Dontineni.

Hi Ram,
how can I draw a curve instead of line?I have posted a Q in BI Beans Forum for you, we should get an answer there:
Curved Line Graph?
10g reports charts wizard. It has only limited number of Graph types when compared to the Graphics builderThat may not be exactly true.
10g Graph Wizard supports 11 major graph types, and 47 sub-types
While 6i Graphics Builder supported 5 major graph types and 35 graph sub-types
There are differences between 6i Graphics and 10g Graph Wizard, so certain things you might have been able to do in 6i may not be entirely possible in 10g. However, the main advantages of the 10g Graph option are - it internally uses BI Beans, which is used in ALL Oracle poducts like JDeveloper, Discoverer, Oracle Apps etc. So the customer gets a consistent look-and-feel. And that it is possible to define your Graph in XML format (and through Java API in JDeveloper).
We have published a list of FAQ's on OTN where you should get answers to at least some of your Q's:
http://otn.oracle.com/products/reports/index.html (click on Graphing FAQ)
Is there anyway that I can add my own attributes in the graph.xml and register in the reports?This will not be possible, however, you should take a look at the complete list of elements and their attributes that is exposed in Graph.dtd - you can then choose the attributes you want, and add them to your Report's Graph.xml:
http://otn.oracle.com/products/reports/htdocs/getstart/whitepapers/graphdtd/graph_dtd_technote_2.html
Navneet.

How to create planned order from the sales order for a processing item

In the MTO sceanrio, assembly order is created directly from the sales order. I would like to create a planned order from the sales order.
I tried the Planning strategy group 81 in the material master but it didnt work.
Could you please let me know how to do it? Is it Schedule line config that controls whether planned order is created?
Thanks
Harish

Narayana,
Planning strategy 82 is the best & standard way of getting production order created on sale order create.
just assign this strategy in MRP 3 view under strategy group.
If not then using sale order reqt type ( KMFA- Assembly with production order) & assigning this to your sale order item category is also another way to create prodcution order without using planning strategy in material master.
Follow steps in SPRO-->Sales & dist --> basic functions >avail check &transfer of requirements> transfer reqts-->determination of reqt type using transaction
Here you may select the item category you in sale orders & assign KMFA to your item category. this will then give option in sale order create to change reqt type to KFMA for assebly orders.
If you need KFMA to be default assign it to Item cat/ MRP type ( PD) combo.
Regards
Ritesh

How to identify what are all the errors appears in process chain,

Hi all,
i have a process chain running, but i want to find out what are all the errors that the process chain has thrown
thanks
pooja

Hi Pooja,
Errors in monitoring:
SID error
Reason: If the corresponding master data is missing for the particular transaction data.
         1. Check for the load timing for the respective master data, if it less than an hour then make the request red and repeat the ip.
         2. If the data is loaded to PSA then you have to delete the request from target and manually push the data to from PSA.
         3. If we are required for selective update then note down the info source from header and find it in RSA1,select the one with Single as postfix.
         4. Goto data selection tab and change the range.
Tip: change the last 4 digits for from to 0000and the last 4 digit for to     9999.
        5. Repeat the ip.
         6. In case only of failure in one target goto RSA1 find the PSA, put he request no. and reschedule it.
Note: IF PSA is present never make the request red rather delete it.
Replication error
Reason: Data source replication Failed.
         1. In order to handle this error you should be known to IP, info source and source system.
         2. Goto RSA1, find the data source in the source sys tab.
         3. Right click on the data source and replicate it.
         4. Since all the transformation rules pertaining to this data source need to be reactivated so go to SE38 and execute rs_transtru_activat_all, data source and sys name.
         5. Delete the red request from the target.
Update R not supported
Reason: The corresponding initialization flag for the ip is lost.
         1. Goto header click on the ip and goto schedule tab and click initialize in the source system, whatever screen appears delete the only request present(the initialization flag).
         2. Goto RSA1, find the ip in the info source (one with the Adhoc initialize flag).
         3. Goto update tab and select Initialize delta process try going for with data transfer.
         4. Reschedule the IP.
Duplicate Record Error
Reason: Duplicate error records for the loaded master data.
         1. Goto info package via header or via RSA1.
         2. Goto processing tab and change the ip setting, selecting only PSA and ignore duplicate records and re run the ip.
         3. Do remember to change the ip settings back to the original once after the second step.
ODS activation failure
Reason: Prerequisites for ODs activation not satisfied i.e. unique key.
         1. Goto maintain variant.
         2. Check for the QM status of the requests in the target they should be green.
         3. Then click the ODS activation tab.
         4. In the screen which appears put the requests for which ODS activation failed.
         5. Activate these and keep on refreshing them until status reverts from green,
Remember to refresh these requests one at a time.
         6. If requests are red then delete them from target.
         7. Reschedule the IP.
Note: Never Try activating ODS manually if it is Y1.
Aggregate Rollup error
Reason: No aggregate found for the respective rollup.
         1. Click on the variant in which the error occurred.
         2. Goto chain tab and copy the variant and instance.
         3. Run the nestle provided program YBW05.
         4. Put in info in there and put the status as g green.
         5. Execute and refresh the status.
Lock issue
Reason: The same ip is been locked by other user or may be used by other process chain.
         1. We can see the locked entries and in the transaction SM12.
         2. Wait for the other process to get complete once the ip loads to target in that process then there is no need for running it for the process.
         3. In other case make the request red, when PSA is present then goto environment tab ->schedule->initiate update.
         4. In the box appears select update in the background.
         5. And the manually update the failed IPs by selecting manual update in the context menu.
Alfa confirming value error, Time conversion error, Chain didnt start, Delay due to long running job, Poor system performance,Heirarchy node exist in duplicate.
Reasons:
Alfa confirming error: Data format mismatch.
Time conversion error: Date, time format mismatch.
Chain didnt start: A scheduled chain didnt triggered at the prescribed timing.
-For all the above error we have to raise a ticket.
Idoc or TRFC error
Reason: An Idoc is been stuck somewhere.
         1. Reload the Master Data manually again from Info-package at RSA1.
         2. Release the Idoc.
         3. In the source system level got environment->transaction->Transaction RFC or Data ware housing level.
         4. In the Screen if the status is Transaction Recorded it means its stuck goto edit and click Execute LUW or press F6.
         5. If status is Transaction executing then it means its fine wait.
         6. Or raise ticket.
Error Due to short Dump
Reason: Error due to Short dump could be due to many reasons i.e. memory, table space, lock, error record, page allocation, failed change run.
Process terminated in the Source system.
           Reason: Sometimes we face that a load has failed due to job Termination at Source System.
      This happens due to unavailability of the source system or some connectivity problem between source and target systems.
1.      Make the request red.
2.      Delete the request from the data target.
3.      Reschedule the ip.
4.      If still the job fails raise the ticket.
And also check in following links:
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
For Data Load Errors check this blog:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Pls assign points if it helps u,
Thanks & Regards,
Madhu

How to Create a Parameterized Report - The select "- ALL-" for department and manager not working.

I downloaded the OEHR Sample Objects application and followed the steps in Oracle® Application Express Advanced Tutorials
Release 3.2.
The parameters and report seem to be working correctly except when I enter "all" for department or manager I get no matching hits.
What's the most efficient way to retrieve "all" if the users selects all for dept and mgr - thus we'd want to return all records in the table.
Region snipprt
Enter Search
Search Employee
Dept
- ALL -
Administration
Marketing
Purchasing
Human Resources
Shipping
IT
Public Relations
Sales
Executive
Finance
Accounting
Treasury
Corporate Tax
Control And Credit
Shareholder Services
Benefits
Manufacturing
Construction
Contracting
Operations
IT Support
NOC
IT Helpdesk
Government Sales
Retail Sales
Recruiting
Payroll
Mgr
- ALL -
Steven King
Neena Kochhar
Lex De Haan
Alexander Hunold
Nancy Greenberg
Den Raphaely
Matthew Weiss
Adam Fripp
Payam Kaufling
Shanta Vollman
Kevin Mourgos
John Russell
Karen Partners
Alberto Errazuriz
Gerald Cambrault
Eleni Zlotkey
Michael Hartstein
Shelley Higgins
The following is the sql that was provided as part of the turitoral.
SELECT
   "OEHR_EMPLOYEES"."EMPLOYEE_ID" "EMPLOYEE_ID",
   "OEHR_EMPLOYEES"."FIRST_NAME" "FIRST_NAME",
   "OEHR_EMPLOYEES"."LAST_NAME" "LAST_NAME",
   "OEHR_EMPLOYEES"."EMAIL" "EMAIL",
   "OEHR_EMPLOYEES"."PHONE_NUMBER" "PHONE_NUMBER",
   "OEHR_EMPLOYEES"."HIRE_DATE" "HIRE_DATE",
   "OEHR_EMPLOYEES"."JOB_ID" "JOB_ID",
   "OEHR_EMPLOYEES"."SALARY" "SALARY",
   "OEHR_EMPLOYEES"."COMMISSION_PCT" "COMMISSION_PCT",
   "OEHR_EMPLOYEES"."MANAGER_ID" "MANAGER_ID",
   "OEHR_EMPLOYEES"."DEPARTMENT_ID" "DEPARTMENT_ID"
FROM
   "#OWNER#"."OEHR_EMPLOYEES" "OEHR_EMPLOYEES"
WHERE
     (lower(first_name) like '%' || lower(:P1_NAME) || '%' OR
      lower(last_name) like '%' || lower(:P1_NAME) || '%')
AND department_id = decode(:P1_DEPT,'%null%',department_id,:P1_DEPT)
AND manager_id = decode(:P1_MGR,'%null%',manager_id,:P1_MGR)

Hi,
Use this..
SELECT
   "OEHR_EMPLOYEES"."EMPLOYEE_ID" "EMPLOYEE_ID",
   "OEHR_EMPLOYEES"."FIRST_NAME" "FIRST_NAME",
   "OEHR_EMPLOYEES"."LAST_NAME" "LAST_NAME",
   "OEHR_EMPLOYEES"."EMAIL" "EMAIL",
   "OEHR_EMPLOYEES"."PHONE_NUMBER" "PHONE_NUMBER",
   "OEHR_EMPLOYEES"."HIRE_DATE" "HIRE_DATE",
   "OEHR_EMPLOYEES"."JOB_ID" "JOB_ID",
   "OEHR_EMPLOYEES"."SALARY" "SALARY",
   "OEHR_EMPLOYEES"."COMMISSION_PCT" "COMMISSION_PCT",
   "OEHR_EMPLOYEES"."MANAGER_ID" "MANAGER_ID",
   "OEHR_EMPLOYEES"."DEPARTMENT_ID" "DEPARTMENT_ID"
FROM
   "#OWNER#"."OEHR_EMPLOYEES" "OEHR_EMPLOYEES"
WHERE
    (:P1_NAME IS NULL OR
        (:P1_NAME IS NOT NULL AND
                (lower(first_name) like '%' || lower(:P1_NAME) || '%') OR
                (lower(last_name) like '%' || lower(:P1_NAME) || '%')
    ) AND
    (:P1_DEPT IS NULL OR department_id = :P1_DEPT) AND
    (:P1_MGR IS NULL OR manager_id = :P1_MGR)

How to create own evaluation path

Hi Experts
Can anyone of the HR experts let me know how to create own evaluation path to be used in Function Module 'RH_STRUC_GET'.
Thanx,
Rahul

Hi
To maintain evaluation paths, choose the IMG activity SAP Web Application Server ® Business Management ® SAP Business Workflow ® Basic Settings (Organizational management) ® Number range maintenance ® Maintain evaluation paths. When the system is in operation, use transaction OOAW .
Here you will find the maintenance view Change evaluation paths: Overview.
Assign a name to the evaluation path (maximum of eight alphanumeric characters).
Go to the dependent view Evaluation paths (individual maintenance).
Describe the relationship chain to be used for the evaluation.
To establish the permitted relationships for an object type, use report RHRELAT0 .
REWARD POINTS

How to Create a Functiona Query

Dear all,
Could any body detail me how to create a functional query. Please give me step by step procedure to create a query.
I would appreciate if you can give me a material with screen shots. Your help will be highly appreciated.
Thank you
Raghu Ram

Hi Raghu,
Go through this document it may help you,
SAP Query
Step 1: Create User Group SQ03
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > User Groups
a) In the User Group: Initial Screen -
Enter User Group Code (self named)
Click on Create
b) In the User Group (Code): Create or Change pop-up window -
Enter the User Group Description
Click on Save
c) In the Create Object Directory Entry pop-up window -
Ö Click on Local Object button
Ö The User Group Created is saved
Step 2: Create User Group SQ02
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > Infosets
a) In the Infoset: Initial screen -
Ö Enter Infoset Code (self named)
Ö Click on Create button
b) In the Infoset: Title & Database Screen -
Ö Enter Description of Infoset in the Name field
Ö In the Data Source selection: Select appropriate Data Source by clicking
the radio button
· Source the data can either be multiple tables OR single table. There are 4
options for the user to select from
Ö Click on Continue (Enter)
Ö Selected Table gets displayed in the Infoset : Initial Screen
c) In the Infoset: Initial Screen -
Ö Click on Insert Table button
d) In the Add Table Screen -
Ö Enter the Table Name that is to be inserted
Ö Click Continue (Enter)
e) In the Infoset: Initial Screen -
Ö Click on Back button
f) In the Field Group Defaults pop-up Screen -
Ö Select Appropriate Field Group Option by clicking on the radio button
· there are 3 options to select from. User can select Empty Field Group
option and then select the data fields in the steps explained further.
Alternatively, User can select an option which clubs all the data fields
From all the tables selected
Ö Click Continue (Enter)
g) In the Change Infoset Screen -
· the left side lists the Tables that the user has selected in step b, c & d
· In the right side, system creates field groups, one for each table listed in the
left part. Initially, the Field Groups are empty
Ö In the Left Side, Click on the arror next to the table name and expand and
display all the data fields in the table
Ö Select a Data Field from the expanded Table view, which is to be added to
the Field Group on the right.
Ö Select a Field Group on the right side, in which Data Field selected above
has to be added
Ö Right click on the Data Field selected and click on Add Field to Field Group
Ö The selected Data Field gets added to the selected Field Group, which is
indicated by an arrow next to the Field Group.
Ö Carry out the steps above to add the required Data Fields to the respective
Field Groups
Ö After transferring Data Fields to Field Groups click on Generate button
h) In the Create Object Directory Entry Screen -
Ö Click on Logical Object button to generate the infoset
i) In the Change Infoset Screen -
Ö Click on the Back button
j) User is taken back to the Infoset: Initial Screen which displays the
created Infoset record.
Step 3: Assigning User Group to Infoset SQ03
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > User Groups
a) In the User Groups: Initial screen -
Ö Enter the User Group for which Infoset is to be assigned
Ö Click on Assign Users & Infosets button
b) In the User Group: Assign Users Screen -
Ö Click on Assign Infosets button
c) In the next screen, select the Infoset, which needs to be attached to the
User Group selected
d) Click on the Back button
Step 4: Creating Query SQ00 & SQ01
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > Queries
a) In the Query from User Group: Initial Screen -
Ö Click on Other User Groups button
Ö In the pop-up screen, User Groups, select the User Group for which the
Query has to created. The pop-up screen closes.
Ö Enter the Query Code in the Query field
Ö Click on Create button
b) A pop-up screen Restrict Value Range shows the list of Infosets assigned to
the User Group
Ö Select the Infoset for which Query has to be created
c) In the new screen Create Query: Title, Format -
Ö Enter the Description of the Query in the Title field
Ö Click on the Next Screen button
d) In the Select Field Group screen
Ö Select the Field Groups from which Data Fields have to be selected for the
Output
Ö Click on the Next Screen button
e) In the Select Field screen -
Ö Select the Data Fields, which should appear in the output
Ö Click on the Next Screen button
f) In the Screen Selection -
Ö Select the Data Fields for the selection criteria
Ö Enter the sequence in which the selected fields would appear in the input
screen of the query.
Ö Define if the selection criteria should be Single Value or Multiple Value Range
by clicking in the appropriate check boxes
Ö Click on the Basic List button
g) In the screen Query Layout Design -
Ö Select the Output Fields from the Data Fields section by clicking the
appropriate check box
Ö Change the sequence of Data Field columns if required
Ö Click on the Test button to test the query created
h) On the Test Query screen click Continue
i) In the Query screen -
Ö Enter the selection criteria
Ö Click on Execute button
j) Save the Query created
Step 5: Running the Query SQ00
a) In the Query From User Group: Initial screen
b) Click on Other User Groups button to select the User Group
c) In the pop-up screen User Groups select the User Group
d) System lists all the queries created for the User Group
e) Select the appropriate Query
f) Click on Execute button
g) User is taken to the Selection screen
h) Enter the selection criteria and click on Execute button
i) System runs the query and gives the output
Regards,
Murali.

Create own views in the Fact Sheet

Hi Forum,
I am trying to create my own views in the fact sheet.
for instance open opportunities,closed oppportunities,open leads,closed leads... w.r.t a particular BP.
plz guide how this can be achieved.
Kind Regards!
Lucas

Hi Lucas,
In order to create your own views in the fact sheet follow the above steps:
spro  CRM  Master Data  Business Partner  Business Partner Cockpit and fact Sheet.
Make the settings in Define Info blocks and views by first maintaining the info blocks. Then go to View definitions and assign info blocks.
Before creating you Info block you have to create your own class and then register this class in CRMC_CCKPT_IOREG table in order to see it in the fact sheet list.
Hope it helps!
Best regards,
Roula Lazaridou

How to create new or delete the existing row in the grid....

hi my friends...
i am developing report using Reuse_alv_grid_display...
my requirement is... At runtime
          1. i may create new row on the grid (empty row inwhich i may enter the data).
          2. i may delete a existing row in the grid
          3. i may edit the existing data...
then i have to trace the modification in the grid in one internal table...
how can i get into this.....
note:
i have some idea to edit the existing record in the grid and trace those modification,
but i don't know abt how to create new or delete the existing row....
can you give me some idea...

Hi deva,
write a class which implemets these methods
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS:
To handle the toolbar on alv
     handle_toolbar
       FOR EVENT toolbar OF cl_gui_alv_grid
          IMPORTING e_object e_interactive,
To handle the buttons on the alv grid
     handle_user_command
       FOR EVENT user_command OF cl_gui_alv_grid
       IMPORTING e_ucomm.
endclass.
Now Implement these methods.
CLASS lcl_event_receiver IMPLEMENTATION.
To handle the toolbar on alv
METHOD handle_toolbar.
   DATA ls_toolbar TYPE stb_button.
    CLEAR gs_toolbar.
    MOVE 3 TO gs_toolbar-butn_type.
    APPEND gs_toolbar TO e_object->mt_toolbar.
    CLEAR gs_toolbar.
    PERFORM icon_create USING 'ICON_INSERT_ROW' gs_toolbar-icon.
    MOVE text-010 TO gs_toolbar-function.
    MOVE text-012 TO gs_toolbar-quickinfo.
    MOVE ' ' TO gs_toolbar-disabled.
    APPEND gs_toolbar TO e_object->mt_toolbar.
    CLEAR gs_toolbar.
    PERFORM icon_create USING 'ICON_DELETE_ROW' gs_toolbar-icon.
    MOVE text-011 TO gs_toolbar-function.
    MOVE text-013 TO gs_toolbar-quickinfo.
    MOVE ' ' TO gs_toolbar-disabled.
    APPEND gs_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
   METHOD handle_user_command.
In this form, check the function code(e_ucomm has the function code), based on that do the required action.
as i said yesterday(i.e for appending a row, deleting a row, modifying a row)
    PERFORM user_command USING e_ucomm.
ENDMETHOD
endclass.
Before calling the alv method, create a object of this class.
DATA :
      gref_event_receiver TYPE REF TO lcl_event_receiver,
      gv_tables_alv          TYPE REF TO cl_gui_alv_grid.
      CREATE OBJECT gref_event_receiver.
      SET HANDLER   gref_event_receiver->handle_user_command
                    FOR gv_tables_alv.
      SET HANDLER   gref_event_receiver->handle_toolbar
                    FOR gv_tables_alv.
check this program for event handling, it is the similar way
demo_abap_objects_events
Hope u understood this.
Regards,
Prasant
reward if helpful

How to create a function with ref_cursor as parameter in OWB 10.1

Hi,
Can any one help me how to create a function with ref_cursor as parameter in OWB 10.1.?
Its urgent. Please help me.
Thanks,
Siv

Hi David,
Thanks for your reply.
Before going for this function, I need to create a package in transformation node in owb module.
My package is as follows,
Create or replace package 123
type xxx is RECORD ( parameters);
type yyy is RECORD (parameters);
type aaa is table of yyy;
type bbb is REF CURSOR return xxx;
type ccc is record (parameters);
type ddd is ref cursor return eee;
END;
How can I create the above kind of package manually in OWB 10.1 (Should not to import the package)
Please help me its urgent.
Thanks,
Siv

How to create user function in Data Functions in Query Designer?

Could someone tell me how to create user function in Data Functions in Query Designer?
I mean function like "NDIV0" in Data Functions.
SAP BW 3.x.
Query Designer (SAP BW 3.x)

Hi check the following URL, it gives how to add in Formulas in formula Builder, not in DataFunctions.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f095592f-42f7-2a10-6ab1-c836a559b48f
Thanks
Reddy

How to create own customized screensaver on Windows 7 Embedded Standard sp1

Hi Support,
How to create own customized screensaver on Windows 7 Embedded Standard sp1 OS.
Regards
YASH PAL SINGH

This forum is for POSReady. wES7 forum can be found here:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=quebecmisc
Create the screen saver in Windows 7 first and then put the file in the distribution share to be included in the image. There are tools that can help create a custom screen saver:
http://download.cnet.com/windows/screensaver-editors-and-tools
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

How to create own interface without .cpp file?

how to create own interface without using .cpp file ? To access the method inside the interface .
e.g. ILayoutTarget.
Should not be SDKFileHelper.h because they are using SDKFileHelper.cpp file

Rathan,
PLz chk the below link (PDF file)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79?quicklink=index&overridelayout=true
Mutti

How to create own functions in the decision maker for process chains?

Similar Messages

Maybe you are looking for