How To Create Static IPs On My Network

How do I setup "static" IPs for my home network equipment?
My network IPs run from 192.168.2.100 thru 192.168.2.149.
Currently I have the following equipment on my network (all are working well):
Wired Desktop running Windows XP Pro
Wireless Laptop running Windows Vista
Wireless Laptop running MAC 10
Wired XBox 360
Wired Linksys Network Media Hub (NMH410)
My setup includes:
Network Magic version 5.5.9195.0 Platform 11.2.9195.1
Westell 6100F Modem
Verizon DSL
Linksys WRT610N Version 1 Router

Likely just an issue with the router you have. I have an ActionTec Q1000 rented from ISP - it does the same thing. Static IPAs versus dynamic ones won't help you.
Prior to its untimely death, a 2-Wire 2701HG-D router, also rented from the ISP before they replaced it with the Q1000, was robust enough to be able to resolve LAN hostnames to LAN IPAs. But no more.... Manually associating the hostname to the IPA in the Q1000's config pages does nothing.
So I bet you are just seeing the same lack of robustness in your router.
If worried about DHCP changing the IPA of a device, setting up a range of static and a range of dynamic IPAs in the router will help. The router should have a section in its config pages to "enable DHCP." In there, there is likely a place where you can define a range of DHCP addresses. Anything outside that range but within the subnet mask would be available for static assignment. For example, suppose your subnet is 192.168.0.1-192.168.0.255 (subnet mask 255.255.255.0). IF you declare your DHCP pool to be 192.168.0.128-192.168.0.254, then 192.168.0.2-192.168.0.127 will be available for static IPA assignment (I am assuming the router has assigned 192.168.0.1 to itself).
With the Macs, then, as you probably know, this is set in  > Sys Prefs > Network > {interface} Advanced > TCP/IP. I usually choose configure "using DHCP with manual address." That saves me having to enter subnet mask and router IPA. But you could just as easily use "manually." Printers and other devices, you'd have to refer to their user guides.

Similar Messages

Operation Start failed on step Allocate elastic IPs with message: Error creating static IPs; AMAZON: The maximum number of addresses has been reached.

Hi All,
I was trying to create Instance for SAP Application Server ABAP 7.4 SP5 incl. Business Warehouse on SAP HANA 1.0 SP7 [Developer Edition] in SAP HANA Enterprise Cloud / Cloud Appliance Library when I got this message 'Operation Start failed on step Allocate elastic IPs with message: Error creating static IPs; AMASON: The maximum number of addresses has been reached'.
I tried looking for an answer or solution for this issue but no success.
Can anyone please help me with this?
Regards,
Deep Tanwar

Hi Deep,
you need to check your Elastic IP limits within the AWS console and how to release them if they are used:
Elastic IP Addresses (EIP) - Amazon Elastic Compute Cloud
AWS Service Limits - Amazon Web Services
Regards,
Hannes

How to create static class in Netbeans ?

I want to create a static class in netbeans.
But it gives error like : static modifier not allowed here. as far as java prog concern it is syntactically correct.
for eg.
public static class Emp
-------body & methods
it looks correct syntactically, but gives error in netbeans, static modifier not allowed here. Why ? How to create static class in netbeans ?

DrClap wrote:
I have occasionally seen the name "static class" used to denote a class whose members are all static.I think this is quite common.
But taking the name literally and trying to declare a class "static" is a little naive."naive" or being used to doing that in C#.

How to create Static menu and Dynamic menu..?

Hi,
I'm new to flash and Action Script, I need to add static menu and dynamic menu to my application. I'm using Action Script 1.0. Can you help me to solve my problem..?
Regards,
Appu

Hi Adithya,
I think the following article is a great resource :
http://www.ibm.com/developerworks/library/os-eclipse-3.3menu /index.html
The current documentation for popup menu could be found here :
http://help.eclipse.org/help32/index.jsp?topic=/org.eclipse. platform.doc.isv/guide/workbench_basicext_popupMenus.htm
(it is also available locally if you install the Eclipse Platform SDK, in "Help" -> "Help Contents"-> "Platform Plug-in Developer guide")
Best regards,
Mariot
adithya a écrit :
> Hello,
> Can anyone tell me as to how to create a 'Context Menu' (static and
> dynamic)??
> Also what is the difference between a static and dynamic context menus?
>
> Are there any javadocs or tutorials?
> Please help.
>
> Adithya.
>

How to create static tree nodes without query

hi ,
i want to create static tree .
e.g.
Employee
Department
Order
these names are static. i dont have from query. but i have to link that nodes to pages how can i do?

Hi Nilesh.
I modified my example to show an extra level for the employees.
But I can't say that I fully understand what you are trying to do. You say you don't want to use links, but you want to use the tree for the navigation of pages. And you say that all the names are static, yet there is a node saying 'show employee' ...
But I hope you now understand how it all works and can continue your work!
Kind regards,
-Peter-

How to create static LOV

Hi
I am using JDeveloper 11.1.1.5.0.
=>I want to create static Lov for status
.open
.close
.current
=>My data table has
.O
.C
.U
can anyone suggest me...

Have you tried creating one? Your question itself has an answer :)
Hint :
Label
=>I want to create static Lov for statusValue
=>My data table has -Arun

How to create Static Record group in Oracle Forms??

Dear All,
I have the following values V1,V2 to be placed in my list item field during DML operations.
I have an example to create the record group based on the table; whereas i have never tried for static value creation.
Could you please guide me how can i acheive this.?
Thanks ....
Regards,
Sunil.G

Thanks dhivya for your reply.
Actually what happens is; when i use the same methodology as you mentioned, it is asking me to set the Initial value.
Whereas in my applications; user has to manually select any of the values i.e eithe V1 or V2 for the first time.
Moreover i have found the query:-
I have created a static record group RG_VERSIONS i.e creating a new record group with the static values mentioning the "Column names " as "Version_label" which i have given the column values as "V1" and "V2" and then another column name as "Version_value" with the column values as "V1" and "V2".
Then i used the below query in the WHEN-NEW-FORM-INSTANCE trigger:-
PROCEDURE p_when_new_form_instance
IS
l_rg_id recordgroup;
l_item_id item;
BEGIN
--Populating value for Version Type based on static record group
l_rg_id := FIND_GROUP ('RG_VERSION');
IF NOT ID_NULL (l_rg_id)
THEN
l_item_id := FIND_ITEM ('BLOCKNAME.COLUMN_NAME');
POPULATE_LIST (l_item_id, l_rg_id);
END IF;
END p_when_new_form_instance;
Then it was working fine.
Thanks for your time.
Regards,
Sunil.G
Edited by: Sunil G on Jun 27, 2010 6:00 AM

How to create a truly open wireless network on CT5760 controller?

Hi
We have a 5760 setup and a mix of 3702 and 1142 access point.
But, no matter what I do, I can't create a really 'open' network... I mean a non-restricted, open wireless network. Like what you get when you buy a home 50$ access point.
Even after disabling all restriction, clients still can't connect directly to one another.
I need to create this SSID for an experiment in one of our labs and they want all their options open... including multicast...
So, my question is: Can I make a super smart network setup to do a simple wireless network?
Thanks guys!
P.S
I can't use any other equipment from various reasons... must do it with what I have...

Hi all,
I tried your suggestions but unfortunately it is not working... after associating two clients to that SSID, they can't reach each other by PING. (which worked when both were connected to a simple home router).
This is the wlan config:
wlan naor 100 naor
accounting-list
no assisted-roaming dual-list
no assisted-roaming neighbor-list
band-select
broadcast-ssid
ccx aironet-iesupport
channel-scan defer-priority 4
channel-scan defer-priority 5
channel-scan defer-priority 6
channel-scan defer-time 100
chd
client association limit ap 0
client association limit radio 0
client association limit 0
client vlan 4000
dtim dot11 24ghz 1
dtim dot11 5ghz 1
exclusionlist
exclusionlist timeout 60
ip access-group web
ip access-group
ip dhcp server 0.0.0.0
ipv6 traffic-filter web none
ipv6 traffic-filter none
load-balance
mac-filtering
mfp client
mfp infrastructure-protection
mobility anchor sticky
radio all
no security wpa
no security wpa akm dot1x
no security wpa wpa2
no security wpa wpa2 ciphers aes
security dot1x authentication-list
security dot1x encryption 104
security ft over-the-ds
security ft reassociation-timeout 20
security pmf association-comeback 1
security pmf saquery-retry-time 200
security static-wep-key authentication open
security tkip hold-down 60
security web-auth authentication-list
security web-auth parameter-map
service-policy client input unknown
service-policy client output unknown
service-policy input unknown
service-policy output unknown
session-timeout 1800
wmm allowed
no shutdown
It id quit frustrating...
Thanks for the help!

How to create static line in line bar graph in obiee 11g?

Hello,
I have requirement where user wants to see a line in bar graph.
Now the line is just static line, we dont have data field available to draw the line in graph.
is there a way to create a static line in chart and show it in Line bar ombo graph??
Thanks in advance..

e.g. i created the static line '10' in fx and now using this column as line in line bar report , but its not displaying the line at measure of '10' in chart.
Drag the column to measures section of graph (Line - Vertical Axis) to change this static value create an edit box prompt and pass the value to the column using Presentation Variable (as said by Fernando)
Thanks,
Saichand

How to create an "internetless / modemless" wifi network?

Hi folks.
Is it possible to create a wifi network using a single airport express, that does not have a modem connected to the airport? I'm having difficulty distributing the IP addresses.
Basically I would like to have a single computer plugged into the ethernet port of the airport express and have it talk to a few wifi clients, but not have a modem of any kind
Thanks again
Regards
Cat

I just tried this again to confirm that it will work.
Hold in the reset button until the amber light blinks quickly and keep holding a few more seconds then release.
Click the Airport icon at the top of the computer screen and look for a network with a name like "apple network abc123" and log on.
Open AirPort Utility, click Manual Setup
Click the Wireless tab below the row of icons and enter your wireless information, network name, password, etc.
Click the Airport icon in the row of icons at the top of the setup window.
Click the Base Station tab to enter a name for the device and device password
Click the Internet icon and make sure the Connection Sharing setting at the bottom is set to "Share a public IP address"
Click the Music icon to enable Airtune
Click Update.
You will get a series of error messages, no internet connection, etc. click ignore on all of them. You may get the error message about no internet several times.
The indicator light should turn green.

How to set static IP for mobile network?

Hi all,
Can the Incredible 2 be set to a static IP address when connecting to mobile networks?
I want to use my phone to connect to my PC using the Wireless Hotspot feature and give me a static IP address so I can register it with one of my work applications.
Thanks
Bill

I was able to change the HotSpot ip address by going to your hot spot and tapping the menu>advanced>LAN Settings. You should be able to change the IP address and Starting IP address from there. One thing I did notice is that Verizon is assigning the DNS to the hotspot itself which is iffy. Change the DNS setting on the laptop/Ipad or what have you to the universal DNS's that are already out there.

How to create "static" key / simple text exchange

Hi
I am completely new to JCE and have a relatively simple licencing scenario.
A program licenced to a client should send information when it's called to a file on a remote-server via ftp. This text-information must be encrypted to that the client is unable to read it.
On the remote-machine that I host myself the encoded information must be decoded by another Java-program.
My first question is, how do I generate a "static" key, that I use in both programs?
Is it really necessary to use Diffie-Hellman Key Exchange to solve this?
Could you advise me a code example that solves this problem?
Thanks.
Marc

Thanks again for your input.
You suggest to use RSA. In the solution that I have figured out I use DES and generate a SecretKey. Would using RSA instead of DES bring me some significiant benefit?
Regards
Marc
From the customer's point of view, what you say
you're sending isn't important - because it's
encrypted, you might be sending ANYthing!
Would you be able to identify the hard-coded code(a
byte-array) from the Java byte-code?Yes. If pressed, and if there was enough at stake, I
could probably figure out how to beat the licensing
even if you wrote the whole app in C++ or native
assembler (although it would be more difficult).
People have been doing this kind of thing forever -
bytes aren't nearly as opaque as folk would like to
believe.
If you happen to have a better solution for licence
validation pls let me know.Licensing is hard. No matter what you do, there
will be a way to get around it. The best you
can do is make breaking your scheme hard enough that
the average user would rather pay for your license
than go through the hassle. How much work is enough
on your part depends on too many things I don't know
(e.g., how much are you charging, what class of
customer are you targetting, what's the risk to the
customer if they're caught violating your license,
etc.).
If your customer is willing to put up code that "calls
home" every time it's run, which sends an encrypted
packet each time it does so, and which will (I
assume?) refuse to work if it doesn't get a proper
answer from home - then go ahead and use RSA to
encrypt your data.
But please don't fool yourself into thinking that you
can absolutely guarantee that no-one will be able to
break your license system. Lots of smart people with
lots of money behind them have been trying for almost
as long as software has been sold - and to date,
they've failed. MS spends a huge amount on building
better license schemes every year, and so far all
they're really managed to do is irritate their
legitimate customers...
Good luck,
Grant

How to create static list type view state?

Hi!
i want to create a static List type view state in asp.net c# for below type of list?
static List<KeyValuePair<string, int>> istrStartDate = new List<KeyValuePair<string, int>>();

Please post it in the dedicated ASP.Net Forum
http://forums.asp.net for more efficient responses.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to create static contexct object

This is the first time i am using pooling mechanism,so my question may sound little basic.
In my program I am using the DBCP pooling machanism.For that i am creating the context , i wnat to put it in a different class , so that i can reuse the code .
But whenever i create the object of that class , i think the context will be reinitialized.what is the best way to use the pooling mechanism on a production system.
here is my code
public class DatabaseConnection {
     * Description of the Method
     * @return Description of the Return Value
     public Connection establishConnection() {
          Connection conn=null;
          Context ctx = new InitialContext();
          try {
               if (ctx == null) {
                    throw new Exception("Boom - No Context");
               DataSource ds =
                    (DataSource) ctx.lookup(
                    "java:comp/env/jdbc/TestDB");
               if (ds != null) {
                    conn = ds.getConnection();
                    System.out.println("in database"+conn.toString());
          } catch (Exception e) {
               e.printStackTrace();
          return conn;

Keep a singleton that holds the DataSource as an instance variable and provides a method called getConnection() to return you a datasource.
Once done using the connection, call close in your program to close it.
Vijay

Administration Panel Error and a Question about Static IPs

Since there appears to be no other place to report errors within the latest generation of Linksys router firmwares, I thought the forums may be the best place.
If you use remote access to your router's Administration management console, upon saving any changes you are sent to the
"Your settings have been successfully saved." page. Upon clicking cancel it successfully attempts to route to the appropriate hostname but does not consider the port being used; therefore, unless you have your management console hosted on port 80 it does not bring you back to the right place.
This is mostly an annoyance.
My question is I'm wondering if it's possible to assign static IP addresses from the router.
On my older (much older) Linksys routers (before Cisco bought them out) you could easily assign static IPs.
I cannot seem to find a way to do with newer generations. All suggestions recommend assigning static IPs from the
network devices themselves, however that poses problems on modern mobile devices which don't let you do that,
and for laptops that are brought into a lot of different networks it becomes an annoyance to change those settings manually.
I have a EA4500 router.
Solved!
Go to Solution.

You want to assign a specific ip address to your computers/network devices thru the router? You can use the DHCP reservation feature of this router.
"A DHCP Reservation is a permanent IP address assignment. It is a specific IP address within a DHCP scope that is permanently reserved for leased use to a specific DHCP client."
Please check this link:
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=71dac52653fa4944ae5e4f94ebdf9586_17362.xml&pid=80&...

How To Create Static IPs On My Network

Similar Messages

Maybe you are looking for