How to create the good received list before actual goods receipt?

Hi,
Current process at client's end.
1)Shipment arrives from vendor
2)Warehouse prints the reception note (with the system generated no.), based on the purchase order (usually referenced on package or vendor paperwork)
3)Warehouse confirms the correct product was shipped by the vendor and hand writes the quantity, lot #, and the zone/location where the material has been stored in the warehouse (they also write down if there are any problems with the shipment, etc)
4)The reception note, along with all of the vendor paperwork is transferred to the purchasing department, who then processes goods receipt based on the information written on the Reception note.
How to to map above in SAP?
(In SAP GR is printed after it is created, whereas client wants the printout before GR is created.)
Thanks in advance,
Sanjog

Hi,
I wonder why purchasers should do GR...
The goods arive at the warehouse and WH staff checks / receives them, so normally the should do the GR.
If they do mistake, GR can be cancelled.
I think your client should revise its process...
What is the sense of giving a paper, with same details as the GR would have, to the purchaser who books the GR based on that paper w/o ever seeing the goods?
I just want to say that in your process the purchaser depends on the information provided by WH staff. Why cannot be the booking executed the WH? And why can purchaser book the GR using the same information?
In case of normal process (GR done by WH staff) purchaser could check the GR in SAP w/o a physical "paperflow"...
Please explain their reason not to do this way.
Regards,
Csaba

Similar Messages

How to create the Business System both sender and receiver in SAP XI / PI

Dear All
kindly let me know how to create the Business System both sender and receiver in SAP XI / PI
Regards
Blue

Hi,
If by any chance you are not able to find these....
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/f1/92b248db68409487661ff13239127d/content.htm
Regds,
Pinangshuk.

How to create a group mailing list in JavaMail?

Hello,
I've been searching through the entire API, specifically the InternetAddress class and I can't seem to find out how to create a group/mailing list. Does anyone know how to do this?
That is, I would like to be able to group a bunch of e-mail addresses together and give that group a name "my friends". Then send it off using this 'group mail address' as opposed to an array of InternetAddress[]. Then when the recipients receive the e-mail, they see "my friends" in the To: field, instead of everyone's e-mail address...
Is this possible in JavaMail? I've tried many things like creating an InternetAddress object passing in a comma-delimited list of e-mail addresses but it doesn't like it.
Thanks in advance!

Hi:
I have the same problem. I've read JavaMail implements RFC 822 which allow mailing lists. But, �how can I implement it with JavaMail?
Best regards,
Fabio Galarraga.

How to get the iChat Buddy List to automatically appear on the Desktop

On my friends computer iChat is set to launch whenever he logs into his account, but the Buddy List does not appear on his Desktop. So when I see him online there is no green video camera mark next to his name.
If I want to do a screen share with him, I have to ask him to go to the iChat icon towards the right side of the Menubar (the round 'speech ballon') and click on Show AIM Buddy List at the bottom. Once he has the Buddy List on his Desktop, I can screen share with him.
Surely there must be a way for the Buddy List to always appear on the Desktop when logging into his computer... Can anyone help out?

Hi,
Interesting one.
If I were telling you how to create this it would be like this:-
1) Go to System Preferences > Accounts > Your account and enter iChat in the Login items. (Makes iChat launch at Computer Start Up)
2) to Hide the Window (Buddy List(s) ) at Start Up click the Red Button to close the Window/Buddy List before Quitting.
This will cause the next Start Up to not show th Buddy List.
How you make the Buddy List appear after that depends on how you bring it in to View.
NOTES:
Some Windows in iChat from Buddy List to the Preferences to th Actual Chat Windows will appear in the places you left them for the most part.
The Exceptions are Incoming Invites.
This means the Buddy List will be were you left it, your Outgoing Invite/Preview whilst waiting for Connection will always be where the last outgoing Video Chat window was.
Using the Red Button on a Open Chat Window will end the Chat (All types).
However doing it to a Buddy List only Hides it.
In addition to this using the Item (or the Keystrokes) from the Window Menu of iChat for a Buddy list when it is On view will Hide it (or Bring it back if Hidden)
The Show AIM option in the Menu Bar icon's drop down is a two edge thing as it shows All Buddies (Available ones) from all AIM Buddy lists if you have more than one (Apple names are also AIM Names in this case).
Does he want to change this Behaviour ?
He would be better off using the iChat Window menu (or Keystrokes) after he has clicked the icon in the Dock to bring the app to the Front so he can access the Menu bar with ichat in it.
He could also click and Hold the icon for iChat in the DOCK and select the Account Name there. This, if I remember correctly, will have the same effect as presenting the Buddy List from the Menu Bar icon (it will be hidden at Next Start Up)
9:58 PM Saturday; November 13, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

How To Create The New VO in Standered Page?

Hi Gurus,
Pl z help me how to create the new Custom VO in slandered page,and how to attach that VO in custom RN in all are slandered page only.
Regards,
Srini

Hi Sara,
1. Could you please tell me how to create the new webservice in XI?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f3ee9d7-0901-0010-1096-f5b548ac1555
2. What tools we have to use to create it.?
/people/community.user/blog/2006/09/19/xi-webservice-studio--a-plain-jane-soap-tool
http://www.gotdotnet.com/Community/UserSamples/Details.aspx?SampleGuid=65a1d4ea-0f7a-41bd-8494-e916ebc4159c
Altova is also a good option
3. How to send the SOAP request to XI?
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
SAP Note 856597
An Add-on
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
Regards,
Prateek

How to create the event in the report for jobs scheduling.

Hi Experts,
i have a requirement like as follows:
The following triggers for Batch Jobs in the SCM system will be created.i.
Background Processing Event = u201CAPO Background Processing Eventu201D. After sending the Event, write a Log Report line u201CEvent u201CAPO Background Processing Eventu201D sentu201D.
Could you please suggest me how we create the Event or which transaction ?
Please give me a steps for creating events so that based on these events we use
CALL METHOD cl_batch_event=>raise
    EXPORTING
      i_eventid                      = p_bpeve
      i_server                       = p_server
      i_ignore_incorrect_server      = p_ignore
    EXCEPTIONS
      excpt_raise_failed             = 1
      excpt_server_accepts_no_events = 2
      excpt_raise_forbidden          = 3
      excpt_unknown_event            = 4
      excpt_no_authority             = 5
      OTHERS                         = 6.
Right now i received message "APO Background Processing Event" is doesn't exists.
Thanks in Advance.
Puneet.

Hi Puneet,
Goto transaction SM62 and in there to BckProcEvents tab. There you can create the events.
You just need to specify the name and Description of an event.
Hope this serves your purpose.
Thanks

How to create the custom infotypes in Campus Management

Hi,
Please help me how to create the custom infotypes in campus management.
Thanks,
Lakshmi.

Hi,
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Enhancement of Infotype
Check the following
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
Infotype Enhancement overview screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
Cheers,
vasavi.
kindly reward if helpful.

How to create the custom table?

Hi, how to create the custom table and how to integrate the table with defferent R/3?
my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
Tks
DPk

how to create the custom table
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
how to integrate the table with defferent R/3
Transport the Table to the another server/client/qas/prd
Kanagaraja L

How to create a group contact list on iphone4?

how to create a group contact list on iphone4?

You can create your groups on your computer and sync them on your iPhone. Or you can use an application. I developped Easy Group, to manage group of contacts, and send group texts and group emails.
http://itunes.apple.com/fr/app/easy-group/id461469079?mt=8
Rémi
Note: I may receive some form of compensation, financial or otherwise,from my recommendation or link.

How to create a group mailing list?

how to create agroup mailing list?

i have followed instructions on "how to create a group mailing list" & get a total blank when i hit return after entering the group name in addressee column. this is after i created a new group under address book, & then drug over individual names into the group. what am i doing wrong?

How to create the sub type field in hr abap infotype

hi ,
how to create the sub type field in hr abap infotype.
regards,
venkat.

Try like this also
creating of infotype please follow these steps ...
Step 1: Create Infotypes
i. Goto Transaction PM01 To create Infotypes:
ii. Enter the Infotype Number and say create all.
iii. The following message would display:
i. PSnnnn Does not exist. How do you want to proceed?
iv. Click
v. A maintain Structure screen appears.
Fill in the short text description and the PS structure of the Infotype.
Since the fields Personnel No, Employee Begin Date, End Date, Sequential Number,Date of Last Change, Name of user who changed the object are available in the PAKEY and PSHD1 structure, define the PSnnnn structure with only the fields you required.
vi. Once the PS Structure is created, save and activate the structure.
vii. In the initial screen of PM01, now click on .
Create a new entry for the infotype.
Fill in the values as mentioned below and save.
Infotype Characteristics:
Infotype Name of the infotype_ Short Text: __Short Description________
*General Attributes :
Time constraint = 1
Check Subtype Obligatory
Display and Selection:
Select w/ start = 3 Valid record for entered data
Select w/ end = 5 Records with valid dates within the period entered
Select w/o date = 6 Read all records
Screen header = 02 Header ID
Create w/o end = 1 Default value is 31.12.9999
Technical Data:
Single screen = 2000
List screen = 3000; List Entry Checked.
viii. In the initial screen of PM01, now click on .
Choose the infotype entry in the list.
Fill in the values as mentioned below and save.
Technical Attributes:
In tab section,
The following attribute values are given:
Applicant DB Tab = PAnnnn Infotype Name
Subtype field = SUBTY
Subtype table = T591A
Subty.text tab. = T591S
Time cnstr.tab. = T591A
Prim. /Sec. = I Infotype
Period/key date = I Interval
and .
ix. Infotype Screen Modification:
Edit Screen 2000 from PM01 for the Infotype.
ABAP Editor for the Infotype Program MPnnnn00 will be displayed.
Click . Flow Logic will be displayed. There string coding of your own logic.
Regards
Pavan

How to create the servlet as acontroller and how to use it

how to create the servlet as acontroller and how to use it

>
John
Please update your forum profile with a real handle instead of "914824".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
I am going to have over 50 buttons in a page, Why? This would be a most unusual UI paradigm. I've never seen such a page, which suggests that whatever you want to do is normally done another way. Please explain the requirement in more detail.
just wanted to know if its possible to do something like this in java.
Java is not used in programming APEX UI behaviour. Java and JavaScript may share initial syllables, but they are not closely related.
It's possible to achieve a great deal in JavaScript, but a clear definition of the requirements is necessary. Do you mean the buttons should be dynamically generated? If so, yes, this is possible in JavaScript. What would drive the process?
Also, i would like to have dynamic action on it, for example, when the button is pressed, fill a string of text into other items(text field) within the page. Without more detail its not possible to make any specific suggestions. For example, I certainly would not want to create 50+ individual dynamic actions relating to different buttons.

Access - How to create Mail Address only list?

Printing envelopes from mail lists - via Microsoft Excel? Access - How to create Mail Address Only list?
Bearing my "new boy" status, step by step instruction would be appreciated.

Hi
This is a question only about the Microsoft products and has nothing to do with Toshiba notebooks but I have investigated a little bit in the net and found this useful sites:
http://support.microsoft.com/kb/q141991/
https://www.nahu.org/member/using%20excel%20to%20create%20lists%20and%20labels .pdf

How to create the PROFORMA INVOICE

Hi all,
How to create the PROFORMA INVOICE.
T-code?
Regards,
T.Muruganantham

Dear Anantham,
After completion of the delivery you can create proforma invoice with reference to the delivery document in the transaction VF01.
You can create Proforma invoice with reference to the Sales order also.
Go to VF01 transaction enter the billing type as F5 if you want create proforma invoice with sales order.
or Enter billing type as F8 it you want to create proforma invoice with delivery.
Before all these things you should have the copy control settings between order to proforma invoice and delivery to proforma invoice
I hope it will help you
Regards,
Murali.

How to create the select option in the screen

HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Please search before asking - post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PM

Try RANGES.
The RANGES has same structure as that of select-options.

How to create the good received list before actual goods receipt?

Similar Messages

Maybe you are looking for