How to customize rules and tasks in PIPE

Hi everyone i'm working with the PIPE and i need to customize one rule for checking the totals... but i can't run the task....and also i have to put the information into the BW.
What is missing?
can you help me please?
Kind regards
Erick

Hi Eric;
I am also working on PIPE issue. Could you please share your documents about customizing with me.
Regards,

Similar Messages

How to use rules and roles in workflow?

Hi experts,
I am a beginner in workflow. Could any one tell me how to use rules and roles in workflow ?
Can u pls tell me the steps to follow?
and more over what are all the <b>important things</b> we have to learn in workflow module ??
I shall be thankful to u.
Thanks
uma

Hi
Workflow automates the steps and activities in a business process according to predefined procedures and rules.
Workflow presents information and documents to the appropriate knowledge worker or agent (another entity such as a program) to make a decision or perform an activity.
Workflow tracks each and every step in the process flow and maintains an ongoing status.
Workflow also collects and reports all of the metrics associated with the execution and completion of the process.
Check the below links u will get lot of info..
http://www.sap-press.com/product.cfm?account=&product=H950
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Go through the following links on FORK :
http://help.sap.com/saphelp_nw04/helpdata/en/24/e2283f2bbad036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8d/25f1e7454311d189430000e829fbbd/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/c5/e4a930453d11d189430000e829fbbd/content.htm
http://www.insightcp.com/res_23.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
For more reference on workflow: http://****************/Tutorials/Workflow/Workflow.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/04/9277a346f311d189470000e829fbbd/frameset.htm
Check these links.
http://www.sapgenie.com/workflow/index.htm
/people/ginger.gatling/blog/2005/12/01/link-workflow-business-objects-to-your-collaboration-tasks
http://help.sap.com/saphelp_nw04/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/8d/25f94b454311d189430000e829fbbd/content.htm
http://www.sap-press.com/product.cfm?account=&product=H950
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Workflow tutorials with step-by-step and with screenshots are available at http://www.****************/Tutorials/Workflow/Workflow.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/c14a9b55103116e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
http://www.sapgenie.com/workflow/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2857887
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2855919
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2735228
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
Debug a workflow.
This has a step by step procedure :
http://fuller.mit.edu/workflow/debugging.pdf
www.erpgenie.com/sap/workflow/debugging.htm
http://www.erpgenie.com/workflow/debugging.htm?2b5de440
Workflow tutorials with step-by-step and with screenshots are available at
http://www.****************/Tutorials/Workflow/Workflow.htm
http://www.sapgenie.com/workflow/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2857887
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2855919
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2735228
http://www.sapbrain.com/TUTORIALS/TECHNICAL/WORKFLOW_tutorial.html
Regarding Work Flow
work flow scenarios.
1. applying for a leave.
2. approval process.
3. material creation process.
4. mainly work flow is for notification purpose.
chk this links
http://help.sap.com/saphelp_erp2005/helpdata/en/fb/135962457311d189440000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.erpgenie.com/workflow/index.htm
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
http://www.insightcp.com/res_23.htm
A good tutorial
http://www.thespot4sap.com/articles/Invoice_Verification_Automation_Using_SAP_Workflow.asp
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
/people/alan.rickayzen/blog
/people/jocelyn.dart/blog/2006/06/19/why-use-abap-oo-with-workflow
a good book
http://www.sap-press.com/product.cfm?account=&product=H950
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.sap-press.com/downloads/h950_preview.pdf
Check the following PDF
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
also seach the workflow forum: SAP Business Workflow
Regards
Anji

How to handle rules and activities in AII

Hi experts,
How to handle rules and activities in AII. Is there any transaction code for it. please give some information, it will be hepful for me

In IMG go to Conditions & Rules to configure the relevant rules.
Rules in AII represent business process you intend to RFID enable. Each rule is made up of multiple activities that defines exactly how a particular rule functions.
SAP delivers standard rules & activities for standard scenarios of Pack, Load etc. processes.
For more information on AII rules and activities refer to the performance assistant available in IMG or read more at the link below:
http://help.sap.com/saphelp_autoid40/helpdata/en/index.htm
Hope this helps.
-Ashish

How can the ruler and or the measurement tool calibrated? both are totally off.

how can the ruler and/ or the measurement tool calibrated? both are totally off by various margins.

skn1868 wrote:
do you know how to reset the ppi so it is accurate?
Earlier, I wrote:
What is the ppi value in the document? Use the Image - Image Size menu to see or set this value.
I can't believe this conversation has gone on this long. You keep wanting it to be a bug, but it seems to me the basic problem here is that you haven't accepted the fact that YOU are responsible for getting the image metadata in order before you can use tools like the Ruler to read out in physical units, such as inches or centimeters, accurately.
Photoshop can only know the size of things in your document if you or your workflow provide it an accurate ppi value!
What's the original source of the material? A scanner? If so, some part of the scanning or image preparation process has left you with an inaccurate ppi value.
For the documents you're already working with, use Image - Image Size, then UNcheck the Resample Image checkbox and type in the correct ppi value. Then everything will work.
-Noel

How to Customize Preview and Print / Sales Order Acknowledgement

Hi,
Our client needs some additional attributes on a sales order acknowledgement print ( Preview and Print ) output.
The current layout is based on ONTORDDFFN.xml and ONTORDDFN.xsd
How to customize the same to include additional attributes like Territory and Shipping instructions etc.These new fields are not there in xsd or the xml.
Appreciate your great help.
Regards,
Raju

Per Oracle you need to implement the method "getPrintExtensionXMLFragment" of PrintExtensionObject.java. Oracle has given the flexibility that getPrintExtensionXMLFragment can either return a XMLFragement or a sql query.. If the code in getPrintExtensionXMLFragment returns a string which starts with "select" Applications code will execute that query and the corresponding XML will be appended to the main XML. This needs to be written in a CustomClass and then set to the Profile " OM: Printed Document Extension Class Name".
I would like to know if somebody has extensively added columns at the different levels (header, lines, Addresses, Line Discounts, Charges) and the same additional cols. were implemented in the CustomClass. Let me know.
Regards,
Rajesh.

How to use rule and send the same email to multiple recipents

Hi,
My requirement is to send the workitem to the multiple recipents. one of my reiend suggest me to use the rule but i don't know how to use that .
can any one of you suggest me how to use rule in workflow.
Also i want to send the same email to multiple recipent .how can i do it by using the multiline variable...please advice me with example if possible..
Note :- Is it necessary to saparate the email id with comma or i will add all the email next one another..
Please suggest.
Thanks in advance ,
Anand

Hi Anand,
I would suggest you first follow the guidelines of the forum and a little searching. One of your questions has been asked just a few threads below.
Regards,
Martin

How to create RULES and MITIGATION COUNTROLS in GRC 5.3

Hi,
We are working on GRC CC 5.3.Could you please refer some of step by step procedure documents for creating new RULES and MITIGATION COUNTROLS.
Thanks & Regards,
KKRao.

Hi KK,
Frank is right, it is not just technicla steps but clear understanding of what you want to mitigate.
I assume that-
1. You have a defined rulebook.
2. you have created all risks and rules are generated.
3. You have run risk analysis in your system.
4. You have now list of risks exposure in your system and your business people have to get a look on that and to decide what is to be removed and what they must retain to run business.
5. You have remediated all authorizations whic hare not neccessary at all.
Now you have list of mitigations.
You may do it at two levels-
First you need to clean all roles. Mitigate them.
Second user level-If user is getting violations via two roles, you need to decide whether you want ot keep them or not.
If not, then you will have to remove one/more roles.
If you want to keep, then you have to mitigate them.
Regards-Sabita
Mitigation procedure-
1. Create a naming convention which clearely states mitigation nature-e.g. which module it belongs to role and risks.
1. Create mitigation control and associate approver, monitor, risks to them,.
2. Mitigate Roles using contorls specifying which risks you want ot omitigate.
Same procedure for user mitigation.

Dvt:schedulingGantt - How to hide "Resource" and "Task" menus

I am using JDev 11.1.1.2.0 ADF.
In the schedulingGantt component two menus "Resource" and "Task" on top left of the chart are displayed at runtime by default. These menus always remain disabled so there is no use for them.
Is there a way to hide these menus? I tried using Firebug but so far I have not been able to find a way to hide these menus.
Thanks
Mitesh.

Repost.

How to customize Category and Category items list while creating New Model

Hi,
what the most convenient way to customize the Category and Category items list while creating New Model?
This is standard:
Now, what we want to achieve, is to customize this menu, to:
1. Display in the Category window only f.e. two categories:
- EA Diagrams
- BPM Diagrams
2. In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available. Additionally, it should behave like a hierarchy ... meaning you can create the second diagram, only as child (related diagram) of the first diagram etc.
I know, excluding the particular diagrams/diagram elements can be configured using the right/profile settings, but how to:
1. Customize the standard New Model menu window
2. Create copies of City Planning Diagrams with different set-ups
3. Set the relationship between diagrams
Is such a configuration change possible?
Thanks a lot for your help!
Regards,
Rafal

Now, what we want to achieve, is to customize this menu, to:
Question #1. Display in the Category window only f.e. two categories:
- EA Diagrams
- BPM Diagrams
Click on Tools => General Options=> Model Creation
Click on Properties => at right of Default category set
Note : Model template does not work as Category. We can't set. An enchancement request has been open to SAP
In the following example I defined a new default (MyNewDefault.mcc). As you can see only BPMN models are available.
To create a new category set with BPMN choice
a) Copy default.mcc in MyNewDefault.mcc file.
    Go to Tools=>General Options=>Model Creation : Select your new category
    Go to Tools=>General Options=>Model Creation : Edit properties and remove all things you does not want keep
or
b) Go to Tools=>General options=>Model Creation : Edit properties and click on Save as button and specify the file name "MyNewDefault".
    Quit the window.
    Select you new category : Go to Tools=>General Options=>Model Creation : "MyNewDefault"
    Edit properties and remove all things you does not want keep.
    Save you new category
Question #2. How to define copies/replicas of existing diagrams
     Wrote an extension
Question #3. How to make sure, particular diagrams can be used (created) only on predefined "levels" and how to set the parent-child relationship, so that PD enforced it directly when creating a new diagram.
     Specify yours conditons in your extension attached to your model
     Example : When the user want create a child diagram : You can display a list of Parent Diagrams to select from.
     You can set in your extension by VBScript parent-child relationship
Question #4 In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available.
If I understand well your question. I suggest to take a look in
Repository=>Administration=>Objects Permission Profile
You can specify objects to show, mask, deactivate at model level.
You can specifiy your own metadata.
But I'm not sure you can mask, deactivate functions following diagram selection. It seem to specific.
Message was edited by: Benoit Le Nabec

How to customize function and control menus

I am making the painful transition from 7.1 to 8.6. How can I customize the function and control menus, and have them always come up the same way on a right-click?
Otherwise it takes several clicks to display the useful items, wasting time and effort.

Dennis,
It looks like this was never continued, but I have the same querstion. It seems like now when I right click up the menu I get what you see in the Not Very Useful Menu jpeg, and I have to clcik 3 more times to get to the More Useful Menu.
Can this be changed by some option setting? I haven't found it and I wish I could.
~~~~~~~~~~~~~~~~~~~~
Paul Johnson
Renco Encoders, Inc
Goleta, CA
~~~~~~~~~~~~~~~~~~~~
Attachments:
Not Vey Useful Menu.jpg ‏10 KB
More Useful Menu.jpg ‏42 KB

How to customize CHM and PDF output

I can easily generate CHM and PDF using the Generate Output option offered by DITA-FMx, but the output is just standard and I would like to customize it according to the company style. Which files should I work on to modify fonts, colours, indentation, etc, both for CHM and PDF?

For PDF output, you should be using the Generate Book from Map command. This is one of the main reasons to use FrameMaker for DITA .. the high quality PDF output. You'll never achieve the same level of quality through XSL-FO as you do through native Frame. See this video for info on leveraging DITA-FMx features for PDF publishing ..
http://blog.leximation.com/2010/03/pdf-publishing-with-dita-fmx-1-1/
To customize the formatting of any output generated through the DITA Open Toolkit (which is what is used by the Generate Output command), you have to modify the XSL and CSS files in the DITA-OT. The "proper" way to do this is to create an OT plugin that provides you with a custom Ant target that does exactly what you want. You can then deliver this plugin to others on your team who need to generate the same output, and you haven't mucked around with the core OT files. You can also just dive in and tweak the files directly, but when you break something you won't be able to test with the original files without restoring from backups.
You can start by tweaking the CSS files, but if you need to make structural modifications to the way the HTML is generated, you'll need to do some XSL work. Note that setting the @outputclass value on the DITA topic files, passes that value into the corresponding element in the @class attribute of the generated HTML. This is a good way to allow you to control formatting of specific elements.
The best place to go for instructions/info on exactly which files to modify in the OT and how to build a plugin, is the dita-users Yahoo group. This is definitely the list to be on for anything that relates to the DITA-OT.
Scriptorium Publishing has a nice whitepaper on customizing the OT ..
http://store.scriptorium.com/items/books/hacking-the-dita-open-toolkit-detail.htm
Also, the dita.xml.org website has some useful info.
Cheers,
...scott

How to customize row and column settings in BI report

Hi SDN,
We have integrated EP702 and BI 704systems and uploaded BI roles into portal. Now i want to personalize BI report settins.
There are 10 columns in BI report, but initially 4 columns are only displayed. But we want to display all the columns initially. I didn't find any option to customize these settings. And variable screen button is displayed when click on Filter link. But we require this button in report itself. Information and Show chars buttons are not available in report.
I am working on BI reports for the first time. Please help me to customize settings.
regards,
Sree.

By default BEx web using a web template called 0ANALYSIS_PATTERN to render the queries. Most clients create a copy of SAP supplied standard web template and customize it to their needs. Most of the changes are what you have described. You can add a new button on the toolbar. Change the Analysis Item properties to control the number of columns.
Once you have a new desired web template, you can set it as your default adhoc-analysis web template in IMG. Look for a node called Report relevant settings. All this setup needs to be done on the BW system. A restart of BI java is required after the customizing settings have been changed.
Thanks
Vineet

How to customize skins and how to apply them to page template ,

how to package a EAR and MAR file inside ADF portal application

Short question, short answer: Read the doc
http://docs.oracle.com/cd/E14571_01/web.1111/e15470/deploy.htm
http://docs.oracle.com/cd/E23943_01/core.1111/e10105/deployer_role.htm
http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10148/jpsdg_deploy.htm#BGBGIBJC
BTW: have you read this: https://groups.google.com/forum/?fromgroups#!topic/adf-methodology/PzncJBPMFDw
Edited by: Yannick Ongena on Jul 4, 2012 3:44 PM

How to customize F140_ACC_STAT_01 to change ides logo and footer.

Hi Experts,
I want to customize form F140_ACC_STAT_01 to change default logo (ides logo) and default footer coming on the standard account statement we generate using Tcode F.27. In this regard I have copied form F140_ACC_STAT_01 to ZF140_ACC_STAT01 from client 000 using Tcode SE71 but after that I am not getting any idea how to customize it. Please help me in this regard. Please provide some steps how to customize it and how to attach the new z* form with driver program RFKORD10 or study material will also be appreciated.
Regards
Sameer

First is look in the sap script for the place where this logo and footer are displayed change it. For attaching your custom script check tcode OB77 and OB78 for the same. These transactions use concepts ofcorrespodnence type
Nabheet

How to customize TabbedPanelsTabHover if more than one

Hi,
How to customize TabbedPanelsTabHover and
TabbedPanelsTabSelected if a page has more that one TabbedPanels.
I've tried changing the class name for both hover &
selected separately for the both the tabbedpanels but none of them
class would apply.
I am trying to have diff hover & selected style for two
diff TabbedPanelsTab, how can it be acheived.
Thanks!

<script type="text/javascript">
var TabbedPanels1 = new
Spry.Widget.TabbedPanels("TabbedPanels1", { tabHoverClass: "hover",
panelVisibleClass: "open", tabSelectedClass: "selected",
tabFocusedClass: "focused" });
</script>
http://labs.adobe.com/technologies/spry/articles/tabbed_panel/index.html

How to customize rules and tasks in PIPE

Similar Messages

Maybe you are looking for