** How to debug ABAP Mapping at run time?

Hi Friends,
We have created one class using the interface IF_MAPPING and the method EXCUTE. Inside the class we have written coding. We refer this class in the interface mapping as mapping program. But, while execute the scenario, how do I debug my class ? (If it is proxy, we will mention the user name in XI adpater CC, refer the same user in ABAP external debuggine, but in the abap mapping class how do i refer..?
Kindly help me friends.
Kind Regards,
Jeg P.

Hi,
maybe you could do it like described in this thread:
Error when using ABAP mapping
Regards
Patrick

Similar Messages

How to call abap proxy at run time?

hello frnds,
i m working on a scenario in which whenever Invoice is saved in SAP R/3 at that time same data should go to Oracle DB. i m using ABAP proxy on SAP R/3 side and JDBC receicver adapter on oracle side of XI.
so to post data i need to call ABAP Proxy whenever invoice is saved.. i have tried to find out save event for invoice but not able to get... can anybody tell me the solution that how i can call proxy at run time?
thanx in advance.
Regards,
Hetal.....

Hi Audumbar,
Check these ...
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/vanita.thareja2/blog/2006/05/23/bpm-sending-message-asynchronously-and-getting-the-response-from-synchronous-system-using-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
cheers,
Prashanth
P.S Please mark helpful answers

How to debug ABAP mapping

Hello
I've built a ABAP mapping based on How To convert an IDoc-XML structure to a flat file and vice versa in XI 3.0, however it runs into exeception when I tested it in SXI_MAPPING_TEST with error;
- <cls:CX_SY_NO_HANDLER id="o265">
- <CX_ROOT>
<TEXTID>1F09B73915F6B645E10000000A11447B</TEXTID>
<PREVIOUS href="#o266" />
<KERNEL_ERRID>UNCAUGHT_EXCEPTION</KERNEL_ERRID>
<IS_RESUMABLE />
- <INTERNAL_SOURCE_POS>
<PROGID>217</PROGID>
<CONTID>5192</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_NO_CHECK />
- <CX_SY_NO_HANDLER>
<CLASSNAME>CX_SY_REF_IS_INITIAL</CLASSNAME>
</CX_SY_NO_HANDLER>
</cls:CX_SY_NO_HANDLER>
I want to debug into the mapping class, someone said jsut set break point in the mapping class and run sxi_mapping_test, then I would be able to debug. However this doesn't work, the execution doesnot stop at the break point (I set session break point, not external break point). Somebody can help?
Thanks
Eric

The trace I got is like:
<?xml version="1.0" encoding="iso-8859-1" ?>
- <Top>
<First>BeginTrace</First>
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping is determined</Trace>
<Trace level="1" type="T">Interface Mapping http://mynamespace/xi OM_Order_to_Simple</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping F1B943B7E3EB382FB1334066F113E0E6</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping EAA847208A4B11DD96D8F1C80AD60A0B</Trace>
<Trace level="3" type="T">Mapping Steps 1 R3_ABAP Z_ABAP_MAPPING_IDOC_TO_FLAT</Trace>
<Trace level="3" type="T">MTOM Attachments are Transferred to the Payload</Trace>
</Top>

How to debug ABAP Web services from Microsoft Visual Studio

When developing .NET based Web services clients using Visual Studio that call Web services in SAP NetWeaver .NET developers would like to be able to debug inside SAP. In my blog <a href="/people/andre.fischer/blog/2007/02/07/how-to-debug-abap-web-services-from-microsoft-visual-studio to debug ABAP Web services from Microsoft Visual Studio</a> I would like to point .NET developers to the fact that SAP NetWeaver offers the option of external debugging to perform this task. Though the steps that have to be performed are described in the SAP Online Help I am sure that this option is not well known amongst the .NET developer community.

Hello WilliamIV,
>>How can I "configure" Visual Studio debugger to allow validation to work?
Since I do not have a VS2012 environment, according to your provided link, I created a test demo with VS2013, however, both ways catch the validation error:
If possible, you could have a try with VS2013 to see if it works or run the example on other machine with VS2012 to see if this is caused by the VS environment, in my side, I do not change any configuration, all are default.
If I misunderstood this issue, please feel free to let me know.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to test ABAP mapping used in a Integration Process node

Hi,
anyone can suggest me how to debug an ABAP mapping used into a transformation node belonging to an Integration Process ?
Thanks.
Francesco

Hi, Francesco.
I've debugged ABAP Mapping with SXI_MAPPING_TEST transaction.
If you have creted a scenario including your ABAP Mapping, you only hace to put the correct sender/sender interface and receiver/receiver interface. You have to put some XML document as an input.
I wrote in my code the Break-point instruction an debugged the process without problems.
regards,
Francisco

How to DEBUG a function module running in background mode? Please help!

Hi Experts,
   I am calling a function module in my ABAP code in background module using the following syntax:
CALL FUNCTION 'YBBC2_CREATE_SNAPSHOT' IN BACKGROUND TASK
          TABLES
            itab_std_format_inv = itab_std_format_inv
            itab_snapshot_inv = itab_snapshot_inv.
        COMMIT WORK.
If I put the breakpoint in the CALL FUNCTION line and execute the program, the debugger does not take me to the valled function module. This may be because I am running the function module as background task.
I cannot comment this "IN BACKGROUND TASK" statement as well since i am debugging in Quality system where I don't have change access.
So how to DEBUG a function module running in background mode? Please help!
Thanks
Gopal

Hi,
You could try to use the following trick:
(1) Put an endless loop into the coding of your function module where you want to start debugging, e.g.
DATA:
    lx_exit_loop(1)     TYPE c.
lx_exit_loop = ' '.
DO.
    IF ( lx_exit_loop = 'X' ).
      EXIT.
    ENDIF.
ENDDO.
(2) Call your function module in background task
(3) Call transaction SM50 and search for the background process.
(3) Choose from menu Program/Mode -> Program -> Debugging
Now you the debugger should bring you right to your endless loop. Set lx_loop_exit = 'X' in the debugger and continue (F5 or F6).
<b>Reward points</b>
Regards

How to create transparent image at run-time?

How to create transparent image at run-time? I mean I want to create a (new) transparent image1, then show other (loaded) transparent image2 to image1, then show image1 to a DC. The problem is - image1 has non-transparent background...

i'm not sure, but you can set the alpha value to 0 in all pixels which are 'in' the background..
greetz
chris

How To Guide on ABAP mapping (How to Use ABAP-Mapping in XI 3.0).

Hi,
I am looking for this document: How To Guide on ABAP mapping (How to Use ABAP-Mapping in XI 3.0), and not able to find it.
Can anybody please point me the location, to look for, or post the document.
Thanks,
Namadev

Hi Namadev Chillal ,
These r the links containing PDF docs which u r looking for:
how to create a flat file out of an IDoc-XML by means of an ABAP mapping program and the J2EE File Adapter.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
Excellent PDF Document on Mapping
http://help.sap.com/bp_bpmv130/Documentation/Operation/MappingXI30.pdf
Mapping Development with the ABAP Workbench
http://help.sap.com/saphelp_nw04/helpdata/en/10/5abb2d9df242f6a62e22e027a6c382/content.htm
ABAP Mappings
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm

Can somebody post link to How to Use ABAP-Mapping in XI 3.0?

Hello,
can somebody post a real link to the document How to Use ABAP-Mapping in XI 3.0. All the links to this documnet in the existing posts are not valid.
Thanks for your information
Jayson

Hi
Following weblog might help you.
Testing ABAP Mapping - Testing ABAP Mapping
XML DOM Processing in ABAP part I - Convert an ABAP table into XML file using SAP DOM Approach.
/people/r.eijpe/blog/2006/02/19/xml-dom-processing-in-abap-part-iiia150-xml-dom-within-sap-xi-abap-mapping
SDN TV demo to create and test ABAP mapiing - https://media.sdn.sap.com/SDNTV/main.asp?mediaId=128
How to guide for ABAP mapping.
https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&
Also check these links,
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm
Testing ABAP Mapping
Using ABAP XSLT Extensions for XI Mapping
Thanks
Gaurav
Edited by: Gaurav Bhargava on Oct 9, 2008 6:27 AM

How to get ABAP mapping option in Interface Mapping

Hi
experts
How to get ABAP mapping option in Interface Mapping . i need to do abap mapping . i didnt find the option
plz help me

Hi,
If u2018ABAP-classu2019 and u2018XSL(ABAP ENGINE)u2019 does not appear under the u2018Mapping Program Typeu2019 in Interface Mapping, one has to make an additional entry in the Exchange Profile.
Only a user with the J2EE security role (administrator) can make the following settings in the Exchange Profile.
It is achieved in the following manner:
1) Open http://<host>:<port>/exchangeProfile/index.html
2)Choose IntegrationBuilder ->IntegrationBuilder.Repository -> com.sap.aii.repository.mapping.additionaltypes
Add: R3_ABAP|Abap-class;R3_XSLT|XSL (ABAP Engine)
To check whether the data has been successfully read from the exchange profile:
1- Open http://<host>:<port>/rep/support/admin/index.html
2- Choose Administration of Properties -> All Properties
3- If the value associated to parameter com.sap.aii.repository.mapping.additionaltypes is not visible, press REFRESH button
After doing above check in IR, if still don't find the option for ABAP mapping then refresh the cache.
Award points if useful.

How to pass column name at run time in function.

how to pass column name at run time in function as parameter.
thank in advance
pramod patel

Hello,
Using dynamic sql you can pass column name to function. well I am not getting what you really want to do ? Please write in more detail. By the way I am providing one example here. see it uses dynamic sql.
Create or replace function fun_updtest (p_columnname_varchar2 in varchar2,
p_value_number in number)
return number is
v_stmt varchar2(500);
begin
v_stmt := 'update emp
set '||p_columnname_varchar2||' = '||to_char(p_value_number)||'
where empno = 7369';
execute immediate v_stmt;
return 0;
commit;
end;
call to this function can be like this..
declare
v_number number;
begin
v_number := fun_updtest('SAL',5000);
end;
Adinath Kamode

How to debug abap macros?

Hi,
Can anyone tell me How to debug abap macros?
Thanks in advance.
-Selva

Hi Rigel,
Understand it is a very old thread, but still could you please help me out with this? I tried to search for the option which you mentioned, but to no avail. I have SAP ECC 7.0.
Thanks in advance.

How to determine itab type at run time

I need to write a subroutine that organizes data in internal tables for presentation by a smartform. There are a few similarly structured internal tables all with the same field name ("recipe_type") by which the data is sorted. My problem is that how I can determine the type of the itab inside my subroutine at run time? Is it ever possible in ABAP?
The subroutine code is attached below. Thanks for any help.
FORM beautify_itab    TABLES itab_in TYPE table
                                 USING v_type TYPE any
                                 CHANGING itab_out TYPE table.
Data declaration
DATA: v_data_row LIKE LINE OF itab_in,                " THIS WON'T COMPILE!
             v_blank_row LIKE LINE OF itab_in.              " blank row
Organize the display of the table data
LOOP AT itab_in INTO v_data_row.
    IF v_type <> itab_in-recipe_type.                     " 'recipe_type' is the sort key for the incoming itabs
      v_type = itab_in-recipe_type.
      IF sy-tabix > 1.
        APPEND v_blank_row TO itab_out.
      ENDIF.
      APPEND v_data_row TO itab_out.
    ELSE.
      CLEAR v_data_row-recipe_type.
      APPEND v_data_row TO itab_out.
    ENDIF.
ENDLOOP.
ENDFORM.                    "beautify_itab

The following code does what I want, but only if the input itab structure is declared first in the program. It won't work if the itab is declared as itab_in TYPE TABLE OF sflight. This is because the function 'GET_COMPONENTS_LIST' only can load the structure of a field declared explicitly in the program. Does anybody know of any method to load the structure of an itab based off a dtab?
Thanks you guys for answers. Points have been rewarded.
*& Report Z_GET_ITAB_TYPE_AT_RUN_TIME
REPORT z_get_itab_type_at_run_time.
DATA: BEGIN OF itab_in OCCURS 0,
         seatsocc_b LIKE sflight-seatsocc,
         fldate LIKE sflight-fldate,
      END OF itab_in,
      itab_out TYPE TABLE OF string,
      wa_itab_out TYPE string.
SELECT seatsocc_b fldate
INTO TABLE itab_in
FROM sflight
WHERE carrid = 'AA' AND
      connid = '0017'
ORDER BY seatsocc_b.
PERFORM beautify_itab
            TABLES
               itab_in
            USING
               sy-repid
               'itab_in'
               'SEATSOCC_B'
            CHANGING
               itab_out.
LOOP AT itab_out INTO wa_itab_out.
WRITE: / wa_itab_out.
ENDLOOP.
*&      Form beautify_itab
      text
     -->ITAB_IN    text
     -->V_KET_FIELD   text
     -->ITAB_OUT   text
FORM beautify_itab TABLES itab_in TYPE table
                   USING v_prog_name LIKE sy-repid
                          v_itab_in_name TYPE any
                          v_key_field_name TYPE rstrucinfo-compname
                   CHANGING itab_out TYPE table.
DATA: itab_fields TYPE TABLE OF rstrucinfo,
        v_field_name LIKE rstrucinfo-compname,
        v_old_key TYPE string,
        v_field_value TYPE string,
        v_data_line TYPE string,
        v_tabix LIKE sy-tabix,
        c_blank_row TYPE string VALUE ''.
FIELD-SYMBOLS: <fs_field>,
                 <fs_data_line>,
                 <fs_field_list> TYPE rstrucinfo.
gets all of the components of a structure
CALL FUNCTION 'GET_COMPONENT_LIST'
    EXPORTING
      program    = v_prog_name
      fieldname = v_itab_in_name
    TABLES
      components = itab_fields.
LOOP AT itab_in ASSIGNING <fs_data_line>.
    v_tabix = sy-tabix.
    LOOP AT itab_fields ASSIGNING <fs_field_list>.
      v_field_name = <fs_field_list>-compname.
      ASSIGN COMPONENT v_field_name OF STRUCTURE
                    <fs_data_line> TO <fs_field>.
      v_field_value = <fs_field>.
      IF v_key_field_name = v_field_name.
        IF v_old_key <> v_field_value.
          v_old_key = v_field_value.
          IF v_tabix > 1.
            APPEND c_blank_row TO itab_out.
          ENDIF.
        ELSE.
          CLEAR v_field_value.
        ENDIF.
      ENDIF.
      CONCATENATE v_data_line v_field_value INTO v_data_line
                  SEPARATED BY space.
    ENDLOOP.
    APPEND v_data_line TO itab_out.
    CLEAR v_data_line.
ENDLOOP.
ENDFORM.                    "beautify_itab

How to Refresh System Form in Run Time

Dear All,
Please give me idea for Refresh System Document in Run Time using DI,basically I am using system columns for update for some scenarios.
So please give solution that how should refresh system form.
Thanks a lot.
Ashish Singh.

Hi,
Please post above discussion in SDK forum.
Thanks & Regards,
Nagarajan

How to choose RT System at Run Time

Variations of this question have been asked, but I'm not sure if they've been answered.
We use LabVIEW RT to do a variety of behavior tests. We have multiple experimenters using the same hardware, and each has his/her own set of "What I want to do" requirements.
Originally, we used LabVIEW 7.0 (i.e. Before Project) to develop a Host and Remote (PXI) application. The Host application was built as an .EXE, while the Remote was saved as an .LLB, copied to the PXI, and "invoked" at Run Time by calls to VI Server. Note that this means that the code on the Remote might (is?) not be as compact, efficient, or optimized as if we had built an .EXE. But we definitely can have Bob's Experiment, Jane's Experiment, and Joe's Experiment on the PC (as separate executables), and each could respectively call Bob's RT, Jane's RT, or Joe's RT on the PXI at run time. No need to have LabVIEW (or LabVIEW expertise) on this system, and Bob, Jane, and Joe can be "ordinary users".
"Modern LabVIEW" takes a slightly different (and probably better) view towards Real-Time -- both the Host and Remote programs are built as Executables (the RT is built as an .RTEXE). We can "pre-deploy" the RT code to the PXI, and set it to run at Startup. This makes getting the RT side "running" semi-automatic -- all you need to do (if it isn't running) is reboot the PXI.
But what if you want Bob, Jane, and Joe's version, selectable by running (on the Host) Bob, Jane, or Joe's Host application?
I'm playing with the following algorithm, which seems to work. I'm presenting it here to get feedback, especially if there is a "better way" to do this.
The key to this method is that there is an .INI file on the Remote, C:\ni-rt.ini, that contains, among other things, the RT Target's Startup Application path (by default, this is C:\ni-rt\startup\startup.rtexe).
Consider three Projects, Project Bob, Project Jane, and Project Joe. Within each Project, a Host executable is built having a name like "UI Bob" (or "Jane" or "Joe"), while the Target executable is given the name "RT Bob" (or "Jane" or "Joe"). The three .RTEXE files are copied to the Target and placed in the Startup folder, C:\ni-rt\startup.
Now run one of the Host executables. It does the following:
FTP a copy of C:\ni-rt.ini from the Target to itself.
Get the name of the Startup .RTEXE.
If it is the "appropriate" name (i.e. if the Host program is UI Bob.exe, the Remote should be RT Bob.rtexe), do nothing, as the Target is already running the right code.
Otherwise, we need to force the Target to run the correct Target code. We can do this by changing the Startup entry in the .INI file to the Remote code we need (for example, RT Bob.rtexe), then tell the Remote to Reboot. When it comes back, it will be running the appropriate RT code.
The Host now goes ahead and tries to connect to the Remote. If a connection cannot be established (for example, the Remote code might have stopped), a Reboot of the Remote might fix things up.
Short of trying to write a single enormous program that encompasses every experimental scenario and situation (i.e. have a big Case Statement with a Bob, Jane, or Joe "choice", and a single executable that had everyone's code in it), this seemed to be a fairly simple way to have the robustness of compiled executables on both the Host and Remote machines, yet maintain the flexibility to let the (non-LabVIEW-guru) User choose which executable to run.
I haven't fully deployed this system -- I'm currently at "Proof-of-Concept" stage, but I've got the various "pieces" working. Does this seem like a sensible appropach? Are there other, simpler, ways to accomplish this?
Bob Schor

Hey Bob.
So I assume you're -completely- working with built executables? You're not going to work in the editor environment to modify your projects at all?
If this is the case, then having a generic deployment phase at the beginning of the executable (with a "setting up hardware for your app" splash screen) isn't a bad idea -
Check the binary on the target, ensure it matches the binary you have on the host machine (in case you ever decide to update).
If they don't match, FTP the new file down to replace the old one.
FTP the ni-rt.ini file, ensure the startup exe is enabled and is pointing to the correct location.
If it's not enabled or not pointing to the correct startup file, modify the .INI file and FTP back to the target.
If you had to update the INI file, ask target to reboot itself. Wait 30 seconds, and wait for target to become available again.
Connect to the target. If you cannot connect, reboot target. If the target comes back and you still cannot connect to the app, notify user.
That's almost exactly how we handle installation and deployment via MAX.
The big assumption here is that the built executables were all built with the same version of LabVIEW Real-Time. If not, you'd need a system replication step in there to make sure the proper version of LabVIEW is on the target before launching the built .rtexe.
-Danny

** How to debug ABAP Mapping at run time?

Similar Messages

Maybe you are looking for