How to debug script to know output function ?

Hi ,
How to know the function to output of this "PPIO_ENTRY" program? (I want get the structure to show ALV )
Please advise, your help is greatly appreciated.
Thanks,
Karen
Edited by: abaper1712 on Jul 14, 2010 8:54 AM

Hi Darshana,
I'm debugging the program"PPIO_ENTRY" ( this program I got from transaction COOISPI ) I want adjust the ALV gird but I did not see where is the ouput layout in the code? , where is the structure to display on ALV report ? Which function to use in this program to display on ALV? Which the funtion to get final value to displayed on ALV in this program?
Thanks in Advance,
Karen.
Edited by: Karen on Jul 14, 2010 9:31 AM

Similar Messages

How to Debug During Event Linkage( Reciever Function Module )

Hi all,
If anybody knows how to debug a reciever function module in event linkage method then please respond.The scenario is that whenever service order is changed the change event will fire the custom business object which has a supertype BUS2088.

Hi Nishanth,
You can debug event linkage using the transaction SWUE.
Here you can raise an event and specify an object key (using an already created service order).
Just flag the trigger receiver FM synchr. checkbox and your break point will be hit.
Hope that helps.
Cheers,
Brad

How to debug script logic in NW?

Hello,
does anybody know how we can debug script logic in BPC NW? I wasn't able to find anything in the documentation. Without debuger or log the script logic is quite useless.
Thanks for any advice
Jan

Hi Jan,
I am not sure if there is some information on this in SDN but there are RKT materials (which are available in Service market place) detailing this.
But in general, you need to setup a debug user and map it to bpc user using BPC server manager tool and then have a stop point in your ABAP program by logging into the NW system using debug user and run your logic using mapped BPC user.
regards,
Sreedhar

How to debug "pipelined parallel enable table function" ?

Dear All,
Normally we can retrieve output from a "pipelined parallel enable table function " by using SQL statement, such as
select output from table(pipelined_function(arg1));
Can anyone alight me how to call this function purely using PL/SQL statement?
Reason for this : We have third party developer develooped a complicate "pipelined parallel enable table function" and this function is currently calling by SQL (select output from table(pipelined_function(arg1));
), I will like to debug this function, but unable to do so, so far I have done :
1) compile function with debug option
2) using Procedure Builder to debug, if I execute the above statement (select output from table(pipelined_function(arg1)); I believe, Procedure Builder will not debug a function from a SQL statement
3) try to build up a PL/SQL block, but don't know how to it.
basically I want to debug this "pipelined parallel enable table function " and don't know how to do it, any example will be greate!

user2302827 wrote:
Using dbms_output is fine but too tedious. I was looking for a PL/SQL procedure builder that can help to debug a statement like this:
select output from table(pipelined_function(arg1));
Any suggestion?I don't know about any procedure builders.
There is a debugger you can use, though I'd have to think about how to invoke it to use with a pipelined function. The debugger is available in GUI tools like SQL*Developer and TOAD and can be used to walk through a program and set values

How to create scripts that perform these functions?

Hi Apple people
I got Mach Desktop because I saw this screenshot:
But it turns out that you have to create scripts/Shell scripts yourself. Googled it, and all that shows up is their website with "sample" Desklets that are tiny grey windows with words in them.
So can somebody please tell me how to create the battery percentage script, the weather, & the date?
Thanks so much!

Battery Percentage:
pmset -g batt
Weather, replace the following POSTALCODE&u=f with your postal code in the example on Mach Desktop wed site. Hmm, if you want to know if it's raining of the President then:
curl --silent "http://xml.weather.yahoo.com/forecastrss?p=20500" | \
grep -E '(Current Conditions:|F<BR)' | \
sed -e 's/Current Conditions://' -e 's/ //' -e 's///' -e 's/<\/b>//' -e 's/ //' -e 's/<description>//' -e 's/<\/description>//'
The date is very easy:
date

How to debug script

1) i heard that we have to put layout in debug mode and then go to print program and execute it also in debug mode.
am i right?
2)where do we check like compilation errors in layoutset.

One way to start the script debugger is:
Se71->utilities->activate debugger.
This may be a time-consuming process. Instead, open a session and execute the program RSTXDBUG. Even if you follow the above menu path to activate the script, it will internally execute the program RSTXDBUG. So you are saving some time in going through all of the above processes.
2. Generally SAP script contains the Layout and corresponding print program.
First go to SE71 and enter ur script name. In the same screen go to Utilities->click on activate debugger option.
Now go to SE 38 and enter ur Print Program name and execute the program.
Now you can debug the script Page wise and window wise.
RSTXDBUG - SAPScript debugger
Debug SAPScript
You can debug a SAPScript: Use Tools - Word Processing - Layout Set.
Enter name of layout set and then Utilities - Activate Debugger.
It is of no consequence which layout set you enter when selecting the SAPscript debugger. (Menu path: Tools-Word-processing - Forms, Utilities - Activate Debugger) The next layoutset called will invoke the debugger. This is quite handy when verifying which layoutset is being called (Verifying customizing settings).
Another way to set the SAPScript debugger is to run program RSTXDBUG.
When a Form is copied from one client to another .And If U try to display or change the form in the copied client .The possible error message cud be :
1.Form not found
Try coping again specifing the language .
2.IF IT dispalys an error message saying That the text file is inconsistent .
Then go to SE38 and Run RSTXCHKO .
It will ask for the form name ,then check all the checkboxes and then run the program.
Note : all Script related problems can be solved using Program RSTX*.
Reward points if this Helps.
sanjay

Hi, how to debug forms of script

hi
could anybody tell me how to debug script forms.
i am using /h in se71, but it is not going inside form.
pl guide me fast.
thanx
robo

Hi Rocky,
Go through the following two ways
SAP Script:
YOu Can debug a SAP Script by activating debugger in two ways 1.In SE71->Menu->Utilities->Activate Debugger, then debugger will be get activated and when your print program is executing Script Debugger will be in active and you can proceed with your debugging.
2. Goto se38-> RSTXDBUG ->Execute this same as going thru in se71-> Menu, now debugger will be activated.
Smartform:I am afraid , we dont have any direct commands or direct procedure to debug a script. But in indirect ways we can do it.
1.Put a command line before where you want check the value of smartform and write the code "BREAK-POINT"->hardcoded debugging.
2.You can debug the function module which generates the smartform.
Regards
Sreeni

How to activate script debugging in Adobe Livecycle designer

Friends,
I would like to know how to activate script debugging in the Adobe Livecycle designer. I need to debug the scripts written in the script editor.
Thanks and Regards.

Syntax checking is available in designer from version 8.1 onwards.
If you want to enable in Adobe Reader then go to Edit --> Preferences --> JavaScript --> Enable the option Show console on Errors on messages.
Apart from it the alternative way to debug the scripts is to use xfa.host.messageBox and check the values.
Chintan

How to debug a function module using in the generic datasource?

Hi all,
We have created a generic data source using function modulle and have been extracting the data for a single customer it contains single records but it has pulled out more than 10,000 records. how to debug the function module used in the data source.
since we schedule for extraction in bi and back ground job gets triggered in ecc for extraction,
i know in se37 we can select the function module name and then debug but still need to check while the bacground job is trigered through bi.
Thanks

Yes you can debug the Function Module.
Open the function module in SE37 and put a break point in the code where you want to check from, then come to RSA3 and give the datasource name and check the Debug check box on this screen, once you click on the start button it will take you the place where you have placed the break point in the FM, by pressing F5 you can see the flow of the FM.
Let me know whether this solves your issue.

How to debug Function Modules from ISA!!!

Hi Gurus,
How to debug the function modules from ISA.
For Ex:If i am in shopping cart or product catalog,e.t.c..i need to know which FM is calling from backend, how to debug the FMs/Bapis related to that from ISA side.
direct me to all the possible ways.
Regards,
Anil.

Hello Anil,
There are a few things you need to look at when trying to debug .
1. The function module needed ( you can do a trace to see which one is called.)
2. The user that is been user With statefull and stateless connection the FM can be called by either the JCO user or the internet user. This will need to be considered when setting your external break point.
3. The server been used, You will need to check the XCM to see which server is been used ie are you using a group connect of a specific server , You need to make sure that you are setting the breakpoint on the server that is specified in the XCM.
Have a look at note [871907|https://service.sap.com/sap/support/notes/871907] the attachment to the note may help you a lot. .
Hope this helps.
Regards
Mark
Edited by: Mark Foley on Feb 11, 2009 11:10 AM

How to debug BDC , Dialog program and Script

Hi all,
Please let me know, how to debug BDC , Dialog program and Script
Thanks&Regards
Devi

SCRIPT DEBUGGING
When we want to debug the SAPSCRIPT, we need to first activate the debugger, we have 2 ways to activate the Debugger.
1) Execute the program RSTXDBUG
2) Go to SE71, from the initial screen enter the form name and press Utilities --> Activate Debugger
When we are in the Debug screen,
3.1) F5 will be debug filed by field, that means if a single line is having 5 fields, if we press the F5 this will do field by field,
3.2) F6 will be line by line, that means when we press the F6, it will debug the line and it will go to the next line. F7 also do the same way
3.3) F8 will be very useful when we have any include statement in the SCRIPT, if any include is there and we press the F5 or F6 then this will go that Include (normally SO10 or any transaction text), then if we want line by line debugging then we can press the F5 or F6, or if you want to execute that in a single shot then press the F8, then the debugger will be executed that include and come back to the Script debugging.
Some times in the script, we may right lengthy lines, if we want to debug that whole line, we have an option called Left/Right, this we will find the Debug screen of the script, there is a Push button, we can make use this button to debug.
We can put the breakpoints in the SCRIPT DEBUGGER also, just press the BREAKPOINT Pushbutton from the debugging screen or press EDIT --> Breakpoint
If we want to debug the print program from the SCRIPT DEBUGGER, just press SHIFT+F7 or EDIT --> ABAP Debugging
If we want to see the Windows which are defined in the forms, just press the Go to --> Form --> Windows .if we want to see the pages go to --> Form --> pages. Here we have an option to see the page wise window also go to --> Form --> page Windows
If we want to see the paragraphs which are defined in that script, press go to --> Styles --> paragraphs.
If we want to see the Character formats which are defined in that script, press go to --> Styles --> Character Strings.
If we want to see the Page formats which are defined in that script, press go to --> OTF --> Page.
If we want to see the Elements which are used in the Script, then press go to --> Text Elements --> Form Elements.
If we want to see the commands which are used in the script, press go to --> Commands --> List
Finally, if we want to exit from the SCRIPT DEBUGING, simply press Debugger --> Exit
DEBUG BDC
ust go into debugging mode and do the BDC step by step, when it comes to the Call Transaction line, check the mode which will be 'N'....Now, overwrite this with 'A' and execute the BDC...It will run in All Screens Mode....
As suggested above the MODE 'A' will do the trick as it takes you to all screens.
Normally MODE N will be defaulted as it will be used for background processing,
Here is a simple tip,
This will be the call transaction part of the program,
CALL TRANSACTION 'IW32' USING BDCDATA MODE 'N'
MESSAGES INTO MESSTAB.
I would suggest you to make it like this,
DATA: V_MODE TYPE C VALUE 'N'.
*<In debug mode set V_MODE = 'A' for debugging>
CALL TRANSACTION 'IW32' USING BDCDATA MODE V_MODE
MESSAGES INTO MESSTAB.
This will be very useful because you just need to change the value of the V_MODE at runtime as A for debugging besides it has N which is the default to be used. (i.e. you need not change the code again and again).
This will be very useful when you have to debug some program in QA or PRD servers.
regards,
srinivas
*reward for useful answers*

How to debug the function separately which is added in the package

Hi Friends, I want to know how to debug the function separately, by taking it from package,. and i dont no where to add begin and end. and dont no how to give input to the function. ANd how to find the error which is detected from production, so i want to find from which statement its failing. So please guide me to proceed further. thanks in advance.

{ FUNCTION fn_get_trail_id (p_incr PLS_INTEGER DEFAULT 1) RETURN PLS_INTEGER IS
p_trail_id tb_xop_orders_trail.trail_id%TYPE;
BEGIN
IF p_incr >= 1 THEN
SELECT sq_xop_trail_id.NEXTVAL INTO p_trail_id FROM DUAL;
RETURN p_trail_id;
ELSIF p_incr = 0 THEN
SELECT sq_xop_trail_id.CURRVAL INTO p_trail_id FROM DUAL;
RETURN p_trail_id;
END IF;
END;
-- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
BEGIN
ppr_openlog('AQ');
ppr_request_lock(v_cb_handle, v_cb_lock);
pr_xop_log_errors('AQ: ==== cb started ('||descr.msg_id||') ====');
my function is like this, how i can i in clude it in declare statement, and how to assign values for that.. and where i have to include "begin".plz help me

How can we debugging scripts and smartforms

hi
experts can u help me for this

Hi,
There are 2 separate kinds of debugging available when you try to debug scripts.
1. Debugging the print program : This is the normal debugging we do for our report programs.
2. Debugging the script itself : You Can debug a SAP Script by activating debugger in two ways:
a .In SE71->Menu->Utilities->Activate Debugger, then debugger will be get activated and when your print program is executing Script Debugger will be in active and you can proceed with your debugging.
b. Goto se38-> RSTXDBUG ->Execute this same as going thru in se71-> Menu, now debugger will be activated.
refer to the link below
http://www.howforge.com/how-to-debugging-sapscript-form
Look at the BLOG here, it is well explained
/people/sudheer.junnuthula2/blog/2007/01/09/script-debugging
DEBUG A SMARTFORM
In the Smartform, within the Code Node you can hardcode a normal abap Break Point ..
Please set a break point in side the smartform:
BREAK <USERNAME>.
Then at the time of print/ preview the program stops there.
Example : If you set the break point in initializationas
BREAK <USERNAME>.
Program stops at break point. After that use Serach and set more break points.
>Search the program logic/Textelement/Address via search and set the break point at that code.
Other way to debug smartform is to debug the Function Module of that smartforms. If you want to debug particular smartform node that the solution would be, insert a "Program Line" just above the node you want to debug and this program line write a normal abap breakpoint. So whenever you call the smartforms, it will stop at this breakpoint and you can debug onwards.
or
SFTRACE can be used for debugging SMARTFORMS.
Read More here.
http://help.sap.com/saphelp_erp2004/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
See the Below thread for how to debug the Smartforms
How to Debug Smartform?
Re: debug of smartfrom
Smart forms
Regards,
Priyanka.

How 2 debug a Perform subroutine in sap script

Hi,
I have a perform endperform in Script. But tht is not working in some case. i m trying to debug but i m not able to go inside the routine and see wht it is doing? . can any one help me how to debug a subroutine in sap script.

Hi Panigrahi,
1) Put a break point in your perform.
2) YOu should change the dispatch option in your Output screen of the transaction which triggers your sap script. The dispatch option should be 1 (Send with a periodically scheduled job).
Then save your transaction.
3) Go to se38 and run the program RSNAST00.
Give the Object Key as the Document Number for which you are triggering the script output.
The control will stop in your perform.
Regards,
Ravi

How to debug zrffous_c payment advice script program?

Hi experts,
Payment advice is printing through (ZRFFOUS_C) this program. I want to debug this program .I tried in this way.
Put the break-point in the program and execute then enter the input data and execute then the following message is displayed.
"A:FO:098 29.01.2009 PNB" after this stopped the program .How to debug this program? I want to find these values (REGUP-BELNR, REGUP-XBLNR) in the program .The location where these values selecting in the program?I tried but i didn't get.
please give me the details or give me form name?
please help me in this?

Hi,
Your procedure of debugging is correct.
when you getting the error message , double click on the message on status bar and see wheather it is standard message or
custome message.
you are getting that error because of invalid data so get the valid data from respective Functional consultant
and try to debug again.
You ll not get that error after giving valid data.
Regards,
Pravin

How to debug script to know output function ?

Similar Messages

Maybe you are looking for