How to debugg in background mode

Hi ,
I have problem while running in background ,
in mm01 transaction while crating a material in forground it is getting created ,and its perfect .but at the same time while trying to run the BDC in the background
the same thing is going for dump,so i need to debugg in the background mode .
can any one help me out on this how to debugg on the background mode.
Thanks in advance ,
vinay .

Hi srinivas,
    Below is the dump iam getting .
Error analysis
    A RAISE statement in the program "CL_GUI_TEXTEDIT===============CP" raised the
     exception
    condition "ERROR_CNTL_CREATE".
    Since the exception was not intercepted by a superior program
    in the hierarchy, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
How to correct the error
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "RAISE_EXCEPTION" C
    "CL_GUI_TEXTEDIT===============CP" or "CL_GUI_TEXTEDIT===============CM002"
    "CONSTRUCTOR"
    or
    "CL_GUI_TEXTEDIT===============CP" "ERROR_CNTL_CREATE"
"CL_GUI_TEXTEDIT===============CP" "ERROR_CNTL_CREATE"
or
"SAPMMG01 " "ERROR_CNTL_CREATE"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
   To obtain this, select in the current display "System->List->
   Save->Local File (unconverted)".
2. A suitable printout of the system log
   To obtain this, call the system log through transaction SM21.
   Limit the time interval to 10 minutes before and 5 minutes
   after the short dump. In the display, then select the function
   "System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, select the Editor function "Further Utilities->
   Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
Thanks,
vinay

Similar Messages

How to Debug a BackGround Job

Hi all,
Can any one tell me how to Debugg a BackGround job in 4.7 version.
I used something like JDBG in SM37 but its not working.
Is there any process for this....

Hi,
You can do using SM50 transaction.
Please check this link
http://www.allinterview.com/showanswers/56422.html
Best regards,
raam

How to DEBUG a function module running in background mode? Please help!

Hi Experts,
   I am calling a function module in my ABAP code in background module using the following syntax:
CALL FUNCTION 'YBBC2_CREATE_SNAPSHOT' IN BACKGROUND TASK
          TABLES
            itab_std_format_inv = itab_std_format_inv
            itab_snapshot_inv = itab_snapshot_inv.
        COMMIT WORK.
If I put the breakpoint in the CALL FUNCTION line and execute the program, the debugger does not take me to the valled function module. This may be because I am running the function module as background task.
I cannot comment this "IN BACKGROUND TASK" statement as well since i am debugging in Quality system where I don't have change access.
So how to DEBUG a function module running in background mode? Please help!
Thanks
Gopal

Hi,
You could try to use the following trick:
(1) Put an endless loop into the coding of your function module where you want to start debugging, e.g.
DATA:
    lx_exit_loop(1)     TYPE c.
lx_exit_loop = ' '.
DO.
    IF ( lx_exit_loop = 'X' ).
      EXIT.
    ENDIF.
ENDDO.
(2) Call your function module in background task
(3) Call transaction SM50 and search for the background process.
(3) Choose from menu Program/Mode -> Program -> Debugging
Now you the debugger should bring you right to your endless loop. Set lx_loop_exit = 'X' in the debugger and continue (F5 or F6).
<b>Reward points</b>
Regards

Debugg VL10 transaction in background mode

Hi,
I want to know how to debugg VL10 transaction in background mode. Since the control does not go to the breakpoint when clicked on background.

Hi,
Try this option..
In classical debugger ..Click settings and check the last option,In back ground task.
Cheers,

How to store files in shared-folder in background mode

Hello All,
My requirement seems to be simple but I have tried many ways in achieving this, but failed. So require the help in accomplishing this task.
Requirement
I have to create a program in SE38 which will create a internal table with data in it in .XML format(which I can achieve).
My requirement is this .XML file needs to be placed in a shared-folder in "BACKGROUND MODE".
I have tried using GUI_DOWNLOAD function module, but this FM only runs in Foreground mode and fails in Background mode. I have tried convincing my client that I will keep the file in Application Server as it is achievable using OPEN DATASET statements, but they are not willing to accept this.
So can you please help me in achieving this task as I am not getting any solution how to keep the file in Shared-folder in BACKGROUND mode itself(not Foreground).
Best Regards,
Tousif

Hi Sanjeev,
I have just used normal GUI_DOWNLOAD FM. Please find my sample code below
CALL FUNCTION 'GUI_DOWNLOAD'
     EXPORTING
*       BIN_FILESIZE                    =
       filename                        = 'D:\Users\baigtomx\Desktop\TOUSIF.XML'
*       FILETYPE                        = 'ASC'
*       APPEND                          = ' '
*       WRITE_FIELD_SEPARATOR           = ' '
*       HEADER                          = '00'
*       TRUNC_TRAILING_BLANKS           = ' '
*       WRITE_LF                        = 'X'
*       COL_SELECT                      = ' '
*       COL_SELECT_MASK                 = ' '
*       DAT_MODE                        = ' '
*       CONFIRM_OVERWRITE               = ' '
*       NO_AUTH_CHECK                   = ' '
*       CODEPAGE                        = ' '
*       IGNORE_CERR                     = ABAP_TRUE
*       REPLACEMENT                     = '#'
*       WRITE_BOM                       = ' '
*       TRUNC_TRAILING_BLANKS_EOL       = 'X'
*       WK1_N_FORMAT                    = ' '
*       WK1_N_SIZE                      = ' '
*       WK1_T_FORMAT                    = ' '
*       WK1_T_SIZE                      = ' '
*       WRITE_LF_AFTER_LAST_LINE        = ABAP_TRUE
*       SHOW_TRANSFER_STATUS            = ABAP_TRUE
*       VIRUS_SCAN_PROFILE              = '/SCET/GUI_DOWNLOAD'
*     IMPORTING
*       FILELENGTH                      =
     TABLES
       data_tab                        = lt_wo
*       FIELDNAMES                      =
*     EXCEPTIONS
*       FILE_WRITE_ERROR                = 1
*       NO_BATCH                        = 2
*       GUI_REFUSE_FILETRANSFER         = 3
*       INVALID_TYPE                    = 4
*       NO_AUTHORITY                    = 5
*       UNKNOWN_ERROR                   = 6
*       HEADER_NOT_ALLOWED              = 7
*       SEPARATOR_NOT_ALLOWED           = 8
*       FILESIZE_NOT_ALLOWED            = 9
*       HEADER_TOO_LONG                 = 10
*       DP_ERROR_CREATE                 = 11
*       DP_ERROR_SEND                   = 12
*       DP_ERROR_WRITE                  = 13
*       UNKNOWN_DP_ERROR                = 14
*       ACCESS_DENIED                   = 15
*       DP_OUT_OF_MEMORY                = 16
*       DISK_FULL                       = 17
*       DP_TIMEOUT                      = 18
*       FILE_NOT_FOUND                  = 19
*       DATAPROVIDER_EXCEPTION          = 20
*       CONTROL_FLUSH_ERROR             = 21
*       OTHERS                          = 22
   IF sy-subrc <> 0.
* Implement suitable error handling here
   ENDIF.
When I run this program in foreground mode, the file gets saved(here in the above example I have just used my desktop path. but the actual requirement is to store file in shared-folder i-e Network Drive).
But when i run the same program in background mode, No file is getting stored.
Regards,

How to restrict user at selection screen while executing in background mode

hi all,
how to restrict user at selection screen while executing in background mode
Regards
Deepak

Hi,
We can get the Program whether this is running in background or not then we need to use SY-BATCH, if the SY-BATCH is set to X then the program is running in Background,
so in the INITIALIZATION event, you can use this SY-BATCH and check the User names, and give the error messsage which you want to restrict
Regards
Sudheer

How to upload a Excel document in background mode

Hello there, how are you?
I am doing an interface program that needs to upload an excel document into an internal table, to do this I used the FM ALSM_EXCEL_TO_INTERNAL_TABLE. The problem with this FM is that only works in foregroung mode, If I run the programin bcakground the FM does not work.
I would like to know if exist a way to upload an excel document into an internal table, for a program that have to be execute in background mode.
Thanks in advance
Best Regards
Alexis Ramirez

*& Form application_server
* text
* --> p1 text
* <-- p2 text
*----------------------------------------------------------------------*FORM APPLICATION_SERVER .
TYPE-POOLS: KCDE.
DATA : lt_intern TYPE kcde_cells OCCURS 0 WITH HEADER LINE.*DATA : INTERN1 TYPE KCDE_INTERN.FILE = PATH.
OPEN DATASET FILE FOR INPUT IN TEXT MODE ENCODING DEFAULT.**--- Display error messages if any.IF SY-SUBRC NE 0.
MESSAGE E001(ZSD_MES).
EXIT.* ENDIF.ELSE.
DO.
READ DATASET FILE INTO Wa_TAB.
append wa_tab to IT_TAB.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
ENDDO.
clear wa_TAB.
LOOP AT IT_TAB into wa_tab.
CASE wa_tab-COL.
WHEN '0001'.
WA_TAB2-PLANT = wa_tab-VALUE.
WHEN '0002'.
WA_TAB2-STGE_LOC = wa_tab-VALUE.
WHEN '0003'.
WA_TAB2-MATERIAL = wa_tab-VALUE.
WHEN '0004'.
WA_TAB2-QUANTITY = wa_tab-VALUE.
WHEN '0005'.
WA_TAB2-BASE_UOM = wa_tab-VALUE.
WHEN '0006'.
WA_TAB2-COSTCENTER = wa_tab-VALUE.
ENDCASE.
AT END OF ROW.
APPEND WA_TAB2 TO IT_TAB2.
CLEAR WA_TAB2.
ENDAT.
clear wa_tab.
ENDLOOP.
ENDIF.
CLOSE DATASET FILE.
ENDFORM. " application_server
Refer here:[How to Read Excel file from Application or Presentation Server and Download into Internal Table. |https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/how%252bto%252bread%252bexcel%252bfile%252bfrom%252bapplication%252bor%252bpresentation%252bserver%252band%252bdownload%252binto%252binternal%252btable.]

How to run a BAPI in background mode?

Dear friends,
I have a requirement [In the UI user can choose two options - run online or run backgroud] to run a BAPI (BAPI_SALESORDER_CHANGE) in background mode (background job) , does anybody know how to implement it?
Thanks a lot!!

Hi
You can define 2 radio button one foreground and otherfor background then
for background use FM BP_JOB_CREATE or BKK_UPT_DISP_JOBS_START or DB2_SCHEDULE_JOB_IMMED
Regards
Shiva

CJIC/CJ88 : How to simulate this flow in background mode without CT

Hi everybody,
I would like to know if it exists some FM, BAPI or Idoc to implement CJIC and CJ88 tcode.
My requirement is the following :
"From the input CSV file, the transaction CJIC must be executed to settle rule and after the transaction CJ88 must be executed by external document number to generate a posting document to capitalize asset project."
So I try to find any solution for the background mode.
Thank in advance
Edited by: LudovicBento on Dec 17, 2010 4:09 PM

check the value of sy-BINPT

Execute one thread in background mode.

hello ,
I have an application where the user can shows dialogs to displays, adds, modify and delete rows of one tale inside some JTextFields.
I have a problem to use this application, when one same dialog is showed more then one time....
Exactly: not problems come the first time the dialog is showed, but the second time, the time to wait because the performance is executed is very long..., and further, ....when the dialog at last was is shoved, no data of the table are in the JTextFields.
I get errors too when at last the dialog was shoved, and the errors not aways said the same reason..., but all the errors are referred to the impossibility (in the performances that followed the first) to have a suitable resultset containing the data.
Some error are "null pointer exception" to read the resultSet, other error is "Impossibils get a block in the required time" ...
I read documentation and I understand that the fault, probably, could came from the Event Dispach Thread that had the task to manage the creation of the ResultSet.
Now I am trying to solve (at this moment without success) the problem in this direction, ...as well I have not experience about to manage the use of SwingWorker class.
I should like hear what it is wrong in that I am doing...
Initially my code was this
     * Create a resultSet, for the current table
    private void createResultSet() {
            statement = dbconn.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
            currentResultSet = statement.executeQuery("Select * from " + tableName);
            boolean validateState = currentResultSet.last();
            regsNmbrOnTheTable = currentResultSet.getRow();
            System.out.println("Numero attuale di records = " + regsNmbrOnTheTable);
            // here come the exception:
            // Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
        } catch (SQLException ex) {
            reportErrors.checkingSyntaxInInputTags("metodo createResultSet(): Errore nel creare il resultSet");
//            Logger.getLogger(Main.class.getName()).log(Level.SEVERE, null, ex);
    } // createResultSetrecently I modified it in order to put the creation of the ResultSet in background....
     * Create a resultSet, for the current table
    private void createResultSet() {
        (acquiresResultSetInBackground = new AcquiresResultSetInBackground()).execute();
        currentResultSet = acquiresResultSetInBackground.doInBackground();
    } // createResultSet
// inner class to manage the performance in background mode.
class AcquiresResultSetInBackground extends SwingWorker <ResultSet, Void> {
        ResultSet resultSet;
        @Override
        protected ResultSet doInBackground() {
        try {
            statement = dbconn.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
              resultSet = statement.executeQuery("Select * from " + tableName);
        } catch (SQLException ex) {
            reportErrors.checkingSyntaxInInputTags("metodo createResultSet(): Errore nel creare il resultSet");
        return resultSet;
}How I said I get again the same behavior that was before......
thank you
Regards
tonyMrsangelo

For custom transactions you shouldn't have a problem - unless you're trying to do something that needs dialog with the presentation server.
Set an infinite loop in the custom transaction, launch your program in backround, then from Sm50, go to debug and find out what's going on.
DATA: debug.
WHILE debug IS INITIAL. " Debug from SM50 will get you here, change field DEBUG in the
ENDWHILE.               " debugger to contain 'X', and the loop will end.
Also, if your custom tx calls any standard SAP programs/FM, there is a chance that those programs work differently in background than foreground.

XLS from Application server in background mode to internal table

Hi,
I need to transfer the content of an excel file in the application server to an internal table while running my program in background. My file is xls, cant use csv. For dataset bin mode, I need to know how to transfer the data to my internal table, already searched on forum but didnt find answer, at least not for background..
ow, I am using v6 here
about the ALSM_EXCEL_TO_INTERNAL_TABLE, I get the upload_ole error all the time, and with TEXT_CONVERT_XLS_TO_SAP, conversion_failed all the time too...
here is the code, just the load part and data declaration:
REPORT zbeto.
TYPE-POOLS: truxs.
TYPES:
BEGIN OF y_cot,
text1(12) TYPE c,
text2(12) TYPE c,
text3(12) TYPE c,
text4(12) TYPE c,
text5(12) TYPE c,
END OF y_cot.
DATA: it_datatab TYPE STANDARD TABLE OF y_cot,
wa_datatab TYPE y_cot,
it_raw TYPE truxs_t_text_data.
DATA:
v_file TYPE rlgrap-filename,
begin_col TYPE i VALUE '1',
begin_row TYPE i VALUE '2',
end_col TYPE i VALUE '5',
end_row TYPE i VALUE '102',
t_ctmp TYPE y_cot OCCURS 0 WITH HEADER LINE,
t_xls TYPE alsmex_tabline OCCURS 0 WITH HEADER LINE.
START-OF-SELECTION.
PERFORM f_load_xls.
FORM : f_load_xls
FORM f_load_xls.
v_file = '
ZSAPDEV\SAPDEVINTERF$\COTACAO\TESTE.XLS'.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = v_file
i_begin_col = begin_col
i_begin_row = begin_row
i_end_col = end_col
i_end_row = end_row
TABLES
intern = t_xls
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw " WORK TABLE
i_filename = v_file
TABLES
i_tab_converted_data = it_datatab[] "ACTUAL DATA
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
t_ctmp[] = it_datatab[].
ENDFORM. "f_load_xls
both FM arent working, and when I try to execute in background mode, before anything, I recieve the following error:
Message text:
Error during import of clipboard contents
Message class:
ALSMEX
Message no.:
037
Message type:
A
and without the ASLM FM, the TEXT_CONVERT give me the conversion_failed exception...
the directories are right, that I am sure, because I just copy&paste it from CG3Z/CG3Y when I uploaded and downloaded to
check the file in the server...
am I missing something?
thanks again,
Roberto Macedo
(PS: I made another topic because none replied the other in 4 days and wasnt solved yet)

Hi!
You didn't find answer for this, because it is not possible. If you run your program in background, it is running on the server, and does not have any connection to your local machine. That's why you can't upload/download in background mode.
You might try to address somehow your local PC, with its IP or MAC address, but I don't think does this task worth so much time.
Run your program in online mode, or if you want to run it in background, then upload your file into the SAP server.
Regards
Tamá

How to schedule the background job daily twice?

Hi,
How to schedule the background job daily twice? any conditions?
Regards,
Srihitha

see the step by step procedure.
Scheduling Background Jobs:
1. Background jobs are scheduled by Basis administrators using transaction SM36.
2. To run a report in a background, a job needs to be created with a step using the report name
and a variant for selection parameters. It is recommended to create a separate variant for each
scheduled job to produce results for specific dates (e.g. previous month) or organizational units (e.g.
company codes).
3. While defining the step, the spool parameters needs to be specified
(Step-> Print Specifications->Properties) to secure the output of the report and help authorized users
to find the spool request. The following parameters needs to be maintained:
a. Time of printing: set to Send to SAP spooler Only for now
b. Name abbreviated name to identify the job output
c. Title free form description for the report output
d. Authorization a value defined by Security in user profiles to allow those users to access
this spool request (authorization object S_SPO_ACT, value SPOAUTH). Only users with matching
authorization value in their profiles will be able to see the output.
e. Department set to appropriate department/functional area name. This field can be used in
a search later.
f. Retention period set to Do not delete if the report output needs to be retained for more
than 8 days. Once the archiving/document repository solution is in place the spool requests could
be automatically moved to the archive/repository. Storage Mode parameter on the same screen
could be used to immediately send the output to archive instead of creating a spool request.
Configuring user access:
1. To access a report output created by a background job, a user must have at
least access to SP01 (Spool requests) transaction without restriction on the user
name (however by itself it will not let the user to see all spool requests). To have
that access the user must have S_ADMI_FCD authorization object in the profile with
SPOR (or SP01) value of S_ADMI_FCD parameter (maintained by Security).
2. To access a particular jobs output in the spool, the user must have
S_SPO_ACT object in the profile with SPOAUTH parameter matching the value used
in the Print Specifications of the job (see p. 3.d above).
3. Levels of access to the spool (display, print once, reprint, download, etc) are
controlled by SPOACTION parameter of S_SPO_ACT. The user must have at least
BASE access (display).
On-line reports:
1. Exactly the same configuration can be maintained for any output produced
from R/3. If a user clicks Parameters button on a SAP Printer selection dialog, it
allows to specify all the parameters as described in p. 3 of
Scheduling background jobs section. Thus any output created by an online report
can be saved and accessed by any user authorized to access that spool request
(access restriction provided by the Authorization field of the spool request
attributes, see p. 3.d of Scheduling background jobs section).
Access to reports output:
1. A user that had proper access (see Configuring user access above) can
retrieve a job/report output through transaction SP01.
2. The selection screen can be configured by clicking Further selection
criteria button (e.g. to bring Spool request name (suffix 2) field or hide other
fields).
3. The following fields can be used to search for a specific output (Note that
Created By must be blank when searching for scheduled jobs outputs)
a. Spool request name (suffix 2) corresponds to a spool name in p. 3.b in
Scheduling background jobs section above).
b. Date created to find an output of a job that ran within a certain date range.
c. Title corresponds to spool Title in p. 3.c in Scheduling background jobs
section above).
d. Department - corresponds to spool Department in p. 3.e in Scheduling
background jobs section above).
4. Upon entering selection criteria, the user clicks the Execute button to
retrieve the list of matching spool requests.
5. From the spool list the user can use several function such as view the
content of a spool request, print the spool request, view attributed of the spool
request, etc. (some functions may need special authorization, see p.3 in
Configuring user access)
a. Click the Print button to print the spool request with the default attributes
(usually defined with the job definition). It will print it on a printer that was
specified when a job was created.
b. Click the Print with changed attributed button to print the spool request
with the different attributes (e.g. changing the printer name).
c. Click the Display contents button to preview the spool request contents. A
Print and Download functions are available from the preview mode.

Running a Dynpro-based Report as a Job/in Background mode

Hello,
i've got a report which hasn't got a selection-screen as its startscreen, but a complex dynpro and is based on different start-buttons and not only the "basic" F8/Run-Button. the users still would like to be able to run the report in background mode and as an automated weekly job. moreover they want to use their own configuration/variant for date-fields etc., just like they are used from a selection-screen. is this possible "out of the box" with a dynpro-based report or how can i archive this through my own programming logic?
thanks for your help,
dsp

Hi,
I guess yes, but since you seem to have several processes possible at startup (those buttons), you will have to code a new bit of code at the start of your application. This to choose the correct process... you should have a new statement like
IF sy-batch IS NOT INITIAL.
"Perform batch process
ELSE.
"Perform normal run
ENDIF.
For the variant, I'm not sure to really get the idea... Do the users already use variants with the actual version? or is there no selection screen at all? If not, you should use one and set-up parameters to pre-fill your dynpro fields...
Kr,
Manu

How to debugg particular statement in sap script

hi friends,
i want to know How to debugg particular statement in sap script.
plz reply.
thanks in advance,
regards
bhaskar

hi
execute rstxdbug to activate script debugger...once the driver program reaches open_form, a popup box will come where u can mention the name of a command, call functinon, text element, etc to place a break point...once it gets into the debugging mode, double click on any line to set a break point, after that pressing f8 will get you to that line
if helpful, reward
Sathish. R

SM35 Re-processing of Incorrect/Error session in Background Mode

Hi all,
I am trying to reprocess a session in SM35 which is in Error status. Here I am a facing an issue, if I reprocess this session in background mode then it says that Batch input data is not available for a screen which is already processed. Ideally it should start from the screen where it threw error in the first run. If I select mode as Foreground or Display error then session is getting processed correctly.
Note:
If the session is in Ready to Process state then processing in background works perfectly fine. Has anyone came across this problem ?
Has anyone tried reprocessing Incorrect Session in background mode ??????
Regrads,
Antony

Thanks Sandra,
Indeed I understood the problem. And the problem is that transaction KEBC is always executed correctly & since its processed correctly its removed from the BDC Queue
Here transaction KEBC, sets a Memory Parameter, and transaction KEU2, first checks whether the memory parameter is initial, if found intial it pops-up a screen and makes the user enter it. In my case KEBC always run successfully
As you rightly suggested when session is in error, transaction KEBC is not getting called again to set the memory parameter & its throwing the pop-up from the transaction KEU2 to be entered by the user. ( BDCDATA currently dosent handle this Pop-up).
I could have omitted the KEBC transaction, but handling this pop-up from transaction KEU2 becomes tricky since it will only pop-up if the memory parameter is initial. And unfortunately Pop-up is the first screen in the sequence for transaction for KEU2 & nothing can be done in coding level to call KEU2 with the pop-up in all scenarios(Even when Memmory varaible is set) !
So I am kind of in a dilema, how to handle this? What I am suggesting to the Functional consultant is that let the session be only run in background mode (as it will be always in a new internal session memory variable will always be inital ) & I will record this pop-up in my BDC omitting transaction KEBC.
Do you have anyother solution for this?
Or is there any option to re process even the successfull transacations ?

How to debugg in background mode

Similar Messages

Maybe you are looking for