How to default a value in the tablecontrol field?

hi
i have created a maintenance view for a z table and this table has a currency field. So when i go to SM30 to maintain the z table i want that when the user clicks on NEW ENTRIES button the system should automatically default the currency field to 'GBP'.
Any idea where to set the default value on a field in the table control or in the maintenance view.
thanks in advance

Hi
Use events in SM30 view
this thread should be useful
Code in View?
regards
vivek

Similar Messages

How can i assign value to the certain field in dynmic table ?

i have created a dynmic table .now i want to assign value to the certain field,how can i do that?
for eg,
<dyn_table> contains fields of name age ,now i want assign 'jack' to this internal talbe's field name ,

Hi,
try this:
FIELD-SYMBOLS: <GT_ITAB>      TYPE TABLE,
               <GS_ITAB>,
               <FS>, <FS1>.
DATA: GT_DATA   TYPE REF TO DATA.
DATA: GS_DATA   TYPE REF TO DATA.
START-OF-SELECTION.
CREATE DATA GT_DATA TYPE TABLE OF PA0002.
ASSIGN GT_DATA->*   TO <GT_ITAB>.
CREATE DATA GS_DATA    LIKE LINE OF <GT_ITAB>.
ASSIGN GS_DATA->*      TO <GS_ITAB>.
ASSIGN COMPONENT 'NACHN' OF STRUCTURE <GS_ITAB> TO <FS>.
<FS> = 'Smith'.
ASSIGN COMPONENT 'VORNA' OF STRUCTURE <GS_ITAB> TO <FS>.
<FS> = 'Paul'.
APPEND <GS_ITAB> TO <GT_ITAB>.
ASSIGN COMPONENT 'NACHN' OF STRUCTURE <GS_ITAB> TO <FS>.
<FS> = 'Jones'.
ASSIGN COMPONENT 'VORNA' OF STRUCTURE <GS_ITAB> TO <FS>.
<FS> = 'Martin'.
APPEND <GS_ITAB> TO <GT_ITAB>.
LOOP AT <GT_ITAB> INTO <GS_ITAB>.
    ASSIGN COMPONENT 'NACHN' OF STRUCTURE <GS_ITAB> TO <FS>.
    ASSIGN COMPONENT 'VORNA' OF STRUCTURE <GS_ITAB> TO <FS1>.
    WRITE: / <FS>, <FS1>.
ENDLOOP.
Regards, Dieter

How to use ADD value in the form field

Hi all,
I want to add +44 code infront of the Tele no field.
How could wei achieve this?..
with regards
prabu

pre-pend the string with telephone number and display it

How to get maximal value from the data/class for show in Map legend

I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomo

use this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01

What is the default timeout value for the SPQuery object?

What is the default timeout value for the SharePoint SPQuery object? I've tried searching online but can't find anything with the actual timeout value.
Someone suggested it might use the timeout property in the database? Anyone know if that's how it works?

Hi,
Do you want to avoid timeout when you query list items?
If so, we can use the following C# code to set timeout.
HttpContext.Current.Server.ScriptTimeout = 600; // 10 minutes
More information is here:
http://200oksolutions.blogspot.com/2013/03/sharepoint-2010-set-timeout-only-to.html
The SPQuery object doesn’t provide any property to set timeout. We can also set timeout in web.config, or SQL Connections or IIS.
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

How to select multiple values from the parameters in BI Publisher report

How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

Hi kishore,
I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
Iam able to get the results when I am selecting one value..
and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
1.Single selection.
2.Multiple selection.
3.'ALL' Values.
4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
Ex:
Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
Expected Output on the report:ACCOUNT,HR,SALES
reply to this would be much appreciated....
thanks,
manoj

How to select multiple values from the Parameters in the concurrent program

How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?

I think there's no way to do that using standard feature.
Some workaround I use :
1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
Selection1 : <choose first selection>
Selection2: <choose 2nd selection>
..etc.
If you don't use it then leave it empty.
2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc.

How to display(binding) values in the table from more than one node?

Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.

Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina

How to display text value in the header data (Header text) of credit memo

Hi...
I need to display the text value of the text field in the header text of the header data in credit memo.
The text values are stored in a ztable and i need to display it based on the billing document stored in vbrk (zfield) that was inserted during the creation of credit request..
Appreciate your help on how to do this...
Thansk and will surely reward the points..
Kanthi..

Hi kanthi ,
Read the value from Z Table and during the creation of cedit memo check out for some exit where u the value from The zTABLE AND use function module SAVE_TEXT with object and id in the header text .
Please award if useful.

How can we get the value of the key field in a custom data model using governance API?

Dear Team,
How can we get the value of the key field in a custom data model, to be used for manipulation of the change request fields using governance API?
Any kind of help would be sincerely appreciated.
Thanks & Regards,
Tushar.

Hi Michael,
Thanks for direction. Let me give more context on this as I'm interested to get more details..One of the issue was to read cross entity field values on UI based on user action and set other entity field behaviour...It is similar to what is being posted here.
For ex: Reading MTART from Basic Data UIBB in MM MDG UI and set the field properties in some other custom entities say ZZETEST. This cannot be done using UI BADI as it only supports single entity at a time and not cross entity. So alternatively we found a solution where we can enhance existing PLMB feederclass cl_mdg_bs_mat_feeder_form by reading the model and the entity as needed as it it proved that it supports cross entity UI field behaviours and so business requirements.
This is a workaround for now.
So the question is How do we achive it using governance API for cross entity field behiaviours.?or what is the right way doing this.
Can we do that using governance API and its' methods?
In the Governance API doc you provided below has referring to below external model as part of gevernance API.
The active or inactive data (before or during the derivation or the check) can be read
with the external data model interface IF_USMD_MODEL_EXT with the method READ_CHAR_VALUE and
the corresponding READ_MODE parameter. To avoid unnecessary flushes (derivations), the NO_FLUSH
parameter should b
e set to ‘X’.
Thanks
Praveen

How to pass a value to the export parameter for a method (public instance)?

Hello,
I am trying ABAP OO newly. How to pass a value to the export parameter for a method (public instance) called in a report? This *export parameter has a reference type of structure.
Thanks in advance,
Ranjini

Hi,
"class definition
class lcl... definition.
public section.
method m1 imporitng par type ref to data. "now you can pass any reference to the method, but this way you have to maintain this reference dynamically inside the method (you can't be sure what that reference is really "pointing" at)
endclass.
"in program
data: r_lcl type ref to lcl...
create object r_lcl.
call method r_lcl
exporting
par = "pass any reference variable here
Regards
Marcin

Problem when defaulting a value to the field

Hi CRM Experts,
I am new to CRM, i am facing a problem when defaulting a value to the field in the Tcode 'SOLMAN_WORKCENTER' (Solution Manager Server).
when i am defaulting it is displaying fine in the view( Redefined the getter method there i passed the value), i set a break point in the getter method when i am executing the getter method i am unable to get the defaulted value in the importing parameter value, but i am getting the value here when i used to type manually in the filed, i cant understand why it is behaving like that? please can any body help in this regard...
Thanks in advance
Hari..

There are other ways to get the string-value of an enum (format into string with a %s formatter for instance).
But I have no idea what you are seeing.
However I would not use the enum to string technique chose you have, just add the enum to the 'file' VI as an input.
And the =0 comparison you have is useless, add the enum to the case structure as the selector.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

How do you assign a value to the APEX field APP_USER

Application Express 4.0.2.00.07
Hi
Is there a special function/procedure to assign a value to the APP_USER field
or a simple APP_USER := :P1_LOGIN_NAME would do
Z

Hello Zac,
>> or a simple APP_USER := :P1_LOGIN_NAME would do
The APEX engine is already doing it for you after a successful login – setting the value of APP_USER as the user login name. You can use it as a substitution string or with the bind variable notation (:APP_USER).
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

How to get the value for the LIT_Withheld field in the city tax form?

I am trying to get the value for the LIT_Withheld field on the city tax form , PAYUSEET.. This is not a database column but is generated based on some conditions.. Appreciate the help. Thanks, Suguna

Hi Abhmanyu,
Thanks for your response.
Search Help Name : ZZ_MG_MARITAL_VH
Selection Method : T502T
Search help parameters are SPRSL, FAMST, FTEXT,
Can u provide me a sample code to fetch the value of corresponding text.
Thanks,
Hari

How To select maximum Value in a specifieid field in internal table.

How To select maximum Value in a specifieid field in internal table?

Step : 1
Sort itab by <Field1> descending.
Just sort the internal table by the field.
STEP: 2
Then read the table at index 1.
Read table itab index 1.
ITAB-FIELD = MAX . " Max field will come in the first row of the internal table.
Regards,
Gurpreet

How to default a value in the tablecontrol field?

Similar Messages

Maybe you are looking for