Documents To Go Software

Hi All,
I'm really new to BlackBerry & technologically challenged to begin with, but here goes: I just bought a BlackBerry for personal use & I love it, except for not being able to read my word docs. I loaded some onto my memory card but my salesman said I needed the Documents To Go software to view & edit them, and it was free on the BlackBerry website. Does anyone know how I can download this software for free from BB? I've found it on other websites, but there's a charge. Also, does anyone know what the software is for viewing PDF's, and is that free on BB's website or do I have to buy that from another site, too? Not to be cheap, but I'm doin' the single mom thing & every little bit helps. Thanks!!!

on top of the discussions list, there are discussions with a red square. That means it's important for you to read them. Among them there is one called :
FAQ : BTSC : Documents to Go is not installed when upgrading to BlackBerry Device Software 4.5
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDeviceSoftware&thread.id=31...
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

Deleted The "Documents To Go" Software

Help! I deleted the "Documents To Go" applications on my Blackberry 9000 because I wanted to buy the Premium edition, but noticed that in order to buy the Premium edition, I needed to input my previous version's registration number, which I don't longer have. Is there anyway I can have the "Documents To Go" software back?!
Thanx!
Solved!
Go to Solution.

You can download the OS from the link below. Just install it on your PC and try the add/remove applicaitons again.
https://www.blackberry.com/Downloads/entry.do?code=2AC2406E835BD49C70469ACAE337D292

How to use documents created from software on bootcamp, on my MBP at the same time?

I have a MBP. Bootcamp was installed. VM Fusion also installed. Two industry unique software programs, one that plots legal descriptions in deeds and one that creates forms have been installed on the bootcamp side and I can acces them through VM Fusion, but when I receive documents in "ndp" format in an email I can't direct it to the application in bootcamp or on the windows side in order to open it. Any suggestions? Also, the forms program creates documents but I'd like to save them somewhere where I can access them from the Mac side. I'm new to this. I could use some help.
Thanks.

I do not know or have time right now to look up NDP format.
To write to NTFS from Mac, you need a driver.
And to write to HFS from Windows also.
I strongly recommend Paragon drivers for both.
That way you can access anything from any platform.
Paragon Software for Mac

How to block Protection removal of a PDF document from other softwares?

Hi,
I have created a PDF document with acrobat reader and watermarked the document and protected the document. But the problem is that it can easily be unprotected (decrypt). After that the document is decrypted, there is no protection symbol on the document and the watermark was removed. Is there any way to block other softwares from removing the protection?
Jomon Antony
Operations Manager
[link removed]

While we are at it, you can not create a PDF with Reader. I assume you meant Acrobat that is a different product. For most folks the PDF security is adequate, but it is not that full proof and that is apparently your concern. About the only way around the problem is DRM as mentioned. Also, be sure to add the copyright statement as that is enough to discourage most folks.

Cannot access pdf document with other software

hello had someone design something for my business they used adobe photoshop and the commercial printer cannot pull it off the cd to print it. I assume they are using differant software. Does anyone know how to fix this?

If they used Photoshop, there are more than a dozen different file types it could be:
PSD
JPG
JPG2000
GIF
PNG
PDF
TIFF
PIXAR
BMP
DCM
IMG
EPS
PGA
TCX
The list goes on, but unless it's BMP, GIF, JPG, PNG or PDF If you don't have Photoshop, you'll have a tough time opening it. If you cannot "pull it off" the CD, that's most likely an issue of the disc being "read only", but even them you should be able to copy the contents to your HD and open them from there.

Documents from Mac added to iCloud do not show up in Pages on iPhone 4S

Synopsis: Dcouments added to iCloud through Safari on Mac do not show up in Pages on iPhone 4S. New documents created in Pages on iPhone do not show up in iCloud. I expect the doucments to appear on my iPhone soon after uploading them from my Mac to iCloud through Safari, and to appear in iCloud soon after switching to the document listing in Pages and leaving the app. Several hours passed by without transfer happening, and I have waited a day and reconnected to Wi-Fi to wait several more hours. Still nothing shows up either in Pages on iPhone, or in iCloud in Safari on Mac. They are listed with their sizes and extensions (.pages or .pages-tef) in the iPhone Settings > iCloud > Storage & Backup > Manage Storage > Pages, though they don't seem selectable from there.
Software versions and Settings:
Mac
Mac OS X 10.7.2 (Lion)
Safari 5.1.1
Pages 4.1
System Preferences > iCloud: signed in; everything selected, except Photo Stream (no iPhoto).
Everything seems to work, except Find My Mac is flakey.
iPhone 4S
iOS 5.0
Pages 1.5 (417) [no other iWork apps]
Documents:
the defualt "Getting Started";
a test document with default name "Blank" and content with the word "Testing", shown with upwards arrow in upper right corner; tried renaming to "Just testing", no transfer resulted.
Plus button + offers: Create Document; copy from iTunes, iDisk, WebDAV; no iCloud (probably because it's supose to be auto);
Settings > Pages:
Use iCloud: ON
Restore: OFF; I have tried this, it automatically turns itself off after restarting Pages. No obvious changes result in Pages.
Settings > Wi-Fi: ON, connected to a network; tried several networks around town, as well as at home with a Time Capsule router.
Settings > iCloud:
everything ON, except Photo Stream;
Documents & Data:
Documents & Data: ON
Use Cellular: ON; also tried OFF initially.
Storage & Backup:
Manage Storage > Pages:
three documents in iCloud are listed, one of which I had created before iCloud on iPhone 3GS, and deleted from iPhone 4S after documents added to iCloud from Mac weren't showing up as expected;
their sizes are given;
suffixes are .pages for the two created on Mac, and .pages-tef for the one created on iPhone 3GS (before iCloud);
iCloud Backup: ON; successfully backs up everyday;
Email works, contacts are synced, calendar works, and everything seems fine except access to documents.
Approaches:
Software updates
Updated all software, no further updates available. Please confirm with aforementioned version numbers.
Add and Remove Documents
Used Safari to add two documents to iCloud with its menu for Pages of iCloud's iWork section, one at a time. Documents were originally created in Pages on Mac, and continuously edited since then. Explicitly saved documents (Save a Version on Lion) before uploading. Documents appeared listed in web page without problem.
Have tried deleting a document on iPhone that was originally created with Pages on iPhone 3GS prior iOS 5 as a way to jog the listing on iCloud. Listing on iCloud in Safari on Mac continues to show document deleted from iPhone. [Before deleting document, I had updated iPhone 3GS to iOS 5 and signed into iCloud a couple days before getting iPhone 4S, then immediately used the restore from iCloud feature for the iPhone 4S in the Apple retail store, updated all apps on Mac and iPhone, then deleted the document in Pages on iPhone.]
On iCloud in Safari on Mac: deleted the two documents uploaded from Mac; added the same documents again; edited documents on Mac, then uploaded and chose "Replace documents"; removed documents again; added them again. Never showed up in Pages on iPhone, even after waiting a day.
Have used iTunes to add the same documents to Pages on iPhone. Successfully opened documents in Pages on iPhone through plus button + > Copy from iTunes. Deleted documents from Pages's document listing, though they remain in iTunes section.
Removed documents of same name, though older copies, from Pages in iTunes for the iPhone.
Created a new document with Pages on iPhone, simply added one word "Testing" and then switched to document listing. New document has name "Blank" and an arrow in the upper right corner indicating it will upload next time an internet connection is established. That hasn't happened regardless of being connected to Wi-Fi and cellular for several hours. Next day, reconnected to internet with both Wi-Fi and cellular, the new dcoument "Blank" still is not in iCloud when I visit the site in Safari on Mac, and still has the arrow in the upper right corner in Pages on iPhone.
iPhone 4S Connected to Internet
Connected to Wi-Fi several hours each day, and cellular all day except from about 10pm to 7am when I switch it to Airplane mode. Always connected to Wi-Fi and cellular when attempting to access the documents in Pages on iPhone.
Restart iPhone and Pages
Have double-pressed Home button on iPhone to reveal along the bottom of screen a list of apps currently open, touched and held an icon to reveal the close badge on all icons, and selected the close badge on Pages, waited a few seconds, then started Pages again.
Have held On/Off button until "slide to power off" appears, then powered off iPhone, waited a few seconds, then held button again to start. Have done this with Pages either open or closed, per previous note. Still no change in document listing for Pages: test document still has not gone to iCloud, documents in iCloud still have not shown.
I think the only thing I haven't done is a complete restore.
Question: Can anybody point out what I might have missed or haven't tried that would get the documents from iCloud to Pages and vice versa?
I'm not looking forward to several hours of restoring, but if I must…
TIA

Okay, I'm not sure what finally jogged it. It seems to be finally working.
After downloading any documents I could from iCloud to my Mac, I deleted all the documents from iCloud. I also deleted all documents from Pages on iPhone, except the original "Getting Started" document.
I duplicated the "Getting Started" document (Pages on iPhone) and edited it by moving the butterfly to the left on the same page, then switched to the Documents view. It had the arrow in the upper right corner of "Getting Started Copy", but no progress bar and nothing showed up in iCloud.
Then, I think I went to Settings > Pages > Use iCloud: NO. Went back to Pages and got a dialog in the Documents listing:
     You are not using iCloud
What would you like to do with the
     documents currently on this
                    iPhone?
Keep on My iPhone
Delete from My iPhone
Continue Using iCloud
I tried keeping them, then going back and turning it back on in Pages's settings, then going back to Pages. Finally something different happened: a progress bar on the "Getting Started copy" document. It never seem to finish, and would disappear if the phone went to sleep. I tried the whole sequenece again with same result, and nothing on iCloud.
I then tried Settings > iCloud > Documents & Data: OFF, and agreed to "Turn Off Documents" and have all documents stored in iCloud deleted, because as far as I could tell there weren't any documents in iCloud at this point anyways. I went back to Pages and the "Getting Started copy" suddenly disappeared.
So, I went back to Settings > iCloud > Documents & Data: ON, and did the same for Settings > Pages > Use iCloud: ON. Oddly, Pages now tried to download "Getting Started copy" even though it really shouldn't have existed anymore. I tried iCloud in Safari on Mac and saw there now was a document by that name, but when selected it said "Updating…" on it. I deleted it in iCloud, and it disappeared (I think, or I deleted it) in Pages on iPhone.
I gave up and waited a bit, maybe an hour or two.
I made sure all the settings were how they needed to be, noticed no documents in iCloud, and only the original "Getting Started" document in Pages on iPhone. I duplicated that document, and that's when it seemed to actually work. First, the arrow in its upper right corner appeared briefly, then a progress bar appeared on it instead, then the progress bar actually moved and completed. (I think. Some indicator happened. Everything is kind of fuzzy at this point while I'm writing this and juggling a couple other technical tasks.) Then I checked iCloud in Safari on Mac and the document was there. Wow.
So, I immediately tried uploading to iCloud from my Mac the two documents I had been trying, one at a time. Each time the document succeeded in iCloud, it suddenly appeared in Pages on iPhone. In fact, the second document began to appear in the documents listing in Pages on iPhone just before the progress bar in iCloud completed.
I tried opening each one in Pages on iPhone, and iCloud immediately updated each one with a preview and as downloadable. I downloaded them to the Mac and they opened fine. [Admittedly, the Pages version from iCloud of the "Getting Started copy" with the moved butterfly was a little different in Pages on Mac: it had the butterfly on the previous page underneath everything; the PDF version of that document had everything correct.]
Anyways, the document listing between iCloud and Pages on iPhone is working now.
I thinking it might have helped to clear out all the documents in iCloud and deleting all documents in Pages for iPhone. However, be sure to at least email copies from Pages on iPhone first if you don't have any backups. I think it might also have helped to turn off Settings > iCloud > Documents & Data: OFF, so it'll send that signal to delete the documents in iCloud, even if there's already nothing there. I don't know for sure, but that's probably the way to start from scratch. Oh, and maybe wait an hour or two after that before doing anything again, then turn Documents & Data: ON, and Pages > Use iCloud: ON, and then start by creating a new document in Pages on iPhone.
I'm just glad I didn't have to do a Restore from iTunes. And now that it's working, it's so instant between Pages on iPhone and iCloud! This is seeming like it will definitely be great, now that it's working.

Corrupted .docx file. Word 2007. Can't open the document. Tags mismatch. Help?

The Office Open XML file *.docx cannot be opened because there are problems with the contents.
Details: The name at the end tag of the element must match the element type in the start tag.
Location: Part: /word/document.xml, Line: 2, Column: 3487212
Hmm, I guess I should give some background info and what I've tried so far, right?
The document is in word 2007, Windows 7. Last night, I was in a hurry, and got a lot of things open. I was opening the document to do a few quick spontaneous revisions, but it was so laggy and I was late for an appointment, so I was feeling panicky
and frustrated. In hindsight, it probably wasn't the best option to just force shut the PC down cause word stopped responding in the middle of opening the document. Still, while I'm no Sherlock, I knew stopping it while it's in the middle of saving the document
would bebad, I didn't think stopping it while opening the document (and not really modifying the document at all, at least that was what I thought before), could have drastic consequences! The document's quite
large, a few hundred words, and about 500 or so pages. It's this really big project I was doing at work, for months now really, and because it's somewhat business confidential in nature, I can't exactly share it freely, or I would've uploaded a copy, sorry.
Anyway, I woke up this morning and opened it, and the error came up. By the way, the document was saved in a 2TB external hard with a few disk errors in the past, if that helps, even if I'm pretty much sure its not a problem with the hard. The error
came up... and yeah. I first made a copy, which I've been trying everything on, in case I do end up making things worse. I have no previous versions of it, just a relatively very old backup. Anything less than 80% recovery would set me back weeks with a wage
cut. The good news is that I was able to open the document in WordPad, managing to recover the first 287 pages (131,543 words), with no errors or data loss, and saved it in a separate file. Apparently, according to information I obtained later, MSWord tends
to not open at all when it encounters an error, but Wordpad tends to stop reading the rest of the code once it encounters an error. So, naturally, I assumed (so correct me if I'm wrong), that behind a few sentences I might lose due to the error, the rest could
also be salvageable. I then looked up the problem all over the internet. Read a microsoft article on troubleshooting/recovering corrupted documents (Open & Repair, Draft Mode, Creating Link, Recover text from any file converter, etc). No dice.
I first saw a similar question on answers.microsoft, and tried to use Tony Jollan's Rebuilder, macros enabled and all. Sadly, no luck.
I managed to make my first breakthrough when I found out that .docx was just a .zip file, and could be renamed as such, with the document.xml extracted and manually fixed using an XML editor (not that I knew how to do that, but I was desperate and
willing to learn). So, made another copy, changed extensions, and tried to specifically extract the document.xml. I believe that it is the main body text, right? That is the only thing really necessary for me, since everything I've done so far is entirely
spartan, with no fancy fonts, formatting, header/footer/notes, media objects, formulas, tables, bullet points, numbered lists, etc. All pure sans-serif text, with some Japanese Kanji thrown in. 500 pages of pure text.
I then hit a snag, when WinRAR encountered an error on extracting document.xml, stating that "CRC failed in word\document.xml. The file is corrupt". So I tried to fix this using several ZIP repair programs and stuff. Nothing worked. At
least not so far. Managed to extract an incomplete version of document.xml using WinRAR's 'Keep Broken Files' option when extracting. The extracted
document.xml came up to 3.31 MB while the original in archive is 7.53 MB. Viewed it in the Windows XML Editor which opened up the text in Internet Explorer, a jumble of text with no line breaks or paragraphs. Still, it actually extracted a few pages less than
the open-using-Wordpad method tried earlier. So trying to fix the archive again...
So I decided to give up the manual route for the meantime and focus on readymade solutions. I came across yet another microsoft article, but this one was at least more relevant than the last. It had this auto FixMe thing. I ran it, didn't
work. Apparently, as I found out later, "This fix will work for one specific tag error where there are equations and graphics in the same paragraph AND Office 2010 SP1 has not been applied."
Tried several (read: dozens) corrupt Word recovery software, from freeware to pro trials, to varying degrees of effect, although unsuccessful
in goal. Some failed to read it, saying it was too corrupted for them to handle, the best managed to recover about three-pages-worth less data compared to the Wordpad method. So yeah, anybody with a similar problem, always open it with wordpad first and recover
what you can. That doesn't mean I'm giving up though.
So here I am, tearing my hair out in frustration. Whew, I feel like I told you guys my life story. I guess worst case scenario, I report this to my boss, so I personally or from the company, I/we'll hire a team of professionals to deal with it.
But that's not an ideal scenario. It's gonna be out of my salary either way (the company has a firm policy of 'You reap what you sow'), along with a wage cut for making such an amateurish mistake even with continuous reminders to back it up every two sentences,
so I'd rather avoid that.
I'm currently looking to see whether there's a way to recover a previous version of an overwritten document somehow using a third-party software or something. (I didn't have Windows Backup enabled, so no previous version on Windows). So far, no
autosaved documents on MSWord AutoRecover, even though I have it enabled set to every 3 mins (or maybe I'm just not seeing it since I'm trying to look for it manually?). Or are the temporary files wiped on shutdown? I don't have 'Always save backup copy' option
enabled on word either.
So yeah, an auto fix, or a lengthy answer detailing what exactly I should do (from the very very basics), or a link to a site with such info, would be much appreciated. Seriously :D
Please. Thanks for at least making an effort :)

When a Word document file is corrupted, then you can try several methods to recover it:
1. First of all, you can try the recovery function integrated with Microsoft Word, as follows:
1) On the File menu, click Open.
2) In the Look in list, click the drive, folder, or Internet location that contains the file that you want to open.
3) In the folder list, locate and open the folder that contains the file.
4) Select the file that you want to recover.
5) Click the arrow next to the Open button, and then click Open and Repair.
You may find more information about this at:
http://office.microsoft.com/en-us/word-help/recover-the-text-from-a-damaged-document-HP005189610.aspx (for Word 2003)
http://support.microsoft.com/kb/893672/en-us (for Word 2007/2010/2013)
2. If you have multiple corrupt Word documents, then you can use the VBA macro provided in article
http://support.microsoft.com/kb/893672/en-us so that all the files will be opened in "Open and Repair" option automatically.
3. There are also free tools from third-parties that can open and read Microsoft Word documents, for example,
3.1 OpenOffice at http://www.openoffice.org. This is a very famous open source project that is designed to support Office file formats, including Word documents. The software can run under Windows.
3.2 LibreOffice at http://www.LibreOffice.org. Another free office suite.
3.3 AbiWord at http://www.abisource.com. This is a cross-platform tool that works under Unix and Windows.
3.4 Google Drive at https://drive.google.com/ also support to load Word document files.
Sometimes when Word fails to open your document, these tools may be able to open it successfully. If that is the case, then after the document is opened, you can just save it as a new document which will be error-free.
4. For docx files, they are actually a group of files compressed in Zip file format. Therefore, sometimes, if the corruption is only caused by the Zip file, then you can use Zip repair tools such as WinRAR at
http://www.rarlab.com to repair the file, as follows:
4.1 Assuming the corrupt document is a.docx, then you need to rename it to a.zip
4.2 Start WinRAR, go to "Tools > Repair Archive" to repair a.zip and generated a fixed file a_fixed.zip.
4.3 Rename a_fixed.zip back to a_fixed.doc
4.4 Using Word to open a_fixed.doc.
There may still be some warnings when opening the fixed file in Word, just let ignore it and Word will try to open and repair the fixed file. If the file can be opened successfully, then you can just save the contents into another error-free file.
5. If all above methods does not work, then you may try third-party tools such as DataNumen Word Repair at
http://www.datanumen.com/word-repair/
I have used it to repair some word documents successfully. It provides a free demo version so that you can try to see if the data you want can be recovered or not.
Good luck!

Windows 8.1 and Deskjet 3050 J610 Software not working

New Desktop running WIndows 8.1 and the HP Deskjet 3050 J610 printer/scanner. I can load the drivers to make the printer work but the scanner software is not present.
When I try to open the Scanner Software:
I get the following:
Would like a fix. Been fighting with this for a while.

ClasicD_72,
It appears that one of our Experts is trying to answer your inquiry on another member's Thread on this subject.
I will comment briefly here and then withdraw.
Commentary
After installing the Full Feature Software, at least in many cases involving Windows 8.1 installs of the printer software, you should see a Printer Assistant shortcut on your Desktop. You can use the Printer Assistant to access the Scan to Document or Photo software package.
Although there is a scan program within the hierarchy of many of the Printer software folders, I have not seen an recent instance where the scan program is a stand-alone executable. In other words, you must call the Scan package from a parent program, even assuming you can find a "Scan" program in Bin or another similar folder.
Example:
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Blackberry Desktop Software for Mac won't open

I've downloaded the Blackberry Desktop Software for Mac to begin synching my new Torch but when I try to launch the software, I get the following message.
"The document “BlackBerry Desktop Software.mpkg” could not be opened. TextEdit cannot open files in the “Installer package” format."
Has anyone encountered this and had any luck getting it to open?
Any advice appreciated -- anxious to update my contacts and fully use my new phone!

Hi choochoo2,
Have you been able to try using a different USB port or to retry connecting after reinserting the BlackBerry battery? If so, try reinstalling the Desktop Software and retrying the connection.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

How to turn a pdf file into excel document and keep original format

I Have an excel bid form that i use all the time ,then i convert it into a PDF And once in a while i need to add something to it I paid for acrobat but when i try to turn the PDF back into an excel document the format is changed , the columns are in the wrong places And it does not look at all like the original excell form is there any thing i can do to fix this If not this will be useless to me any help appreciated

A PDF does not contain any spreadsheet, word processing or page layout file format information.
No "format", columns, rows, etc.
"When you create a PDF, you’re painting a picture. Your paintbrush is the is the result of a combination of the software used to create the source document and the software you’ve chosen to convert your source document into the universal electronic document format we all know as PDF.
Like the painter’s brushstrokes, each character, each line and each image is fundamentally independent, but they can interact with each other to produce particular visual effects. On the PDF page, objects are connected by a coordinate system and not a lot else. There’s no logical, semantic connection between the letters comprising a word; characters simply happen at a series of locations on the rendered page.
As originally designed, PDF is fundamentally a system for painting objects onto a page, plus a whole lot of other features we aren’t talking about right now! There’s no innate concept of words, sentences, paragraphs, columns, headings, images, tables, lists, footnotes – any of the semantic structures that distinguish a “document” from a meaningless heap of letters, shapes and colors. PDF is fundamentally about how the document appears on the page, not how it looks when abstracted from the page."
Duff Johnson, Each PDF Page Is a Painting
http://talkingpdf.org/each-pdf-page-is-a-painting/
Be well...

Unable to open a Word document?

Hey,
Was wondering if someone can provide me guidance as to why I cannot open a Word document sent to me (the file is received and downloaded by email).
The error message that I get whenever trying to open the document is as follow:
Tried opening the document using other software but without success. Also tried the suggested in the error message (i.e. repaired the file, open with text recovery... no success)
I previously used PCs to open the same document. I notice that PCs from Asia are able in opening the file, while PCs in North America weren't... Very confused about the file type.
Appreciate all your help!
Peter

Hi Csound1,
I do agree that it has to do with the file itself. As far as I can see, the file itself is a .doc (Word document).
I attached a document info screen shot here:
Thanks again.

Acrobat X Pro - Compare Documents - Need Help

I'm running X Pro as a trial to determine if it is right to purchase for my company. The main feature I am interested in is the "compare documents". I am in the construction industry and part of my business is to provide estimates for projects. We use acrobat 9 to view and comment on these documents and specialized software for the estimating portion. Anyway, construction documents (aka blueprints) are commonly used in a pdf format. As pricing develops, it is not uncommon for blueprints to change as the design of the building progresses. Hence the allure of the compare document function. Repeated attempts at comparing documents has proved unsuccesful. I keep getting the message "unable to find matching document". I have used both the "image" setting and the "scanned document" setting. Any help would be greatly appreciated.

I have a PC. I’m running windows 8 64 bit, but this problem occurred on Windows Vista as well. There are no error codes it just won’t open. You can use the program that morning to convert or combine files into a pdf. then 2 hours later you go to repeat the process and nothing. The icon for it will appear on your desktop for 5 sec. and then disappear. That’s it nothing else happens. The same results will occur no matter how you try to open the program, restart your computer, or check for updates.
The only way to make the program work is to uninstall and reinstall it. The first time this occurred the adobe rep told me to reinstall the whole suite. It took 8 hours. I have now found were I stored the suites setup files to reinstall the individual application verses the entire suite, but it is still annoying to have to re install it ever 30 days or so. When I do re-install it all the serial numbers are in place and it says I have 36,XXX days left in my trail.
I don’t know what else you would want, but this is all I can give you because that’s what happens. I’m currently taking online classes and we are all required to have this exact same suite and I know at least 2 other students who have mentioned this requiring problem. One was so tired of it the purchased a different program to do it’s job.

Good Tutorial On Installing Third-Party Software For Mac OS X?

Hey Everyone,
I have a friend who recently switched over from Windows to a MacBook Pro running Mac OS X 10.4.x.
Recently he asked me to explain to him how installing software on Mac OS X works. He was always used to the typical Windows setup.exe installation methods that dropped everything you needed in the Start Menu.
After explaining to him the usage of DMG files, PKG files, Installer.app, and drag-and-drop installs, he felt pretty comfortable with the process.
However, I'm wondering if anyone out there knows a good beginners tutorial for how software installation on Mac OS X works. I checked the Mac 101 site, didn't see much. Searching Apple's knowledge base didn't give me any helpful "general" documents.
If anyone has useful links they can point me to so I can direct my friend (and anyone else that might ask me this type of question) to some reading material, that could prove very helpful.
Thanks!

I don't think there is such a document because installing software on a Mac is pretty simple and self-explanatory. You've explained as much as there is needed to know.
Your friend could visit The XLab FAQs where he will find numerous FAQs on using and troubleshooting the Mac.
There are plenty of books available that can be ordered through Amazon.com.

Anyone looking for Software Engineer(LabVIEW/C++) opportunity in Pittsburgh, PA?

Hello, my name is Nicholas Ricchiuto and I am looking for a Software Engineer (LabVIEW/C++) for a company in Pittsburgh Called Acutronic. If you know of any Software Engineers looking for work, please pass along my information below, I could sure use your help. Thank you very much! -Nick
Nicholas Ricchiuto
B&V Stafffing Inc
724-933-5218
[email protected]
ATE Software Engineer (Pittsburgh, PA –RIDC Park)You will be responsible for a challenging new product development. In this role you will implementcomplex automated test algorithms and data acquisition software for inertial sensors and MEMS(micro-electro-mechanical systems) inertial devices.Your roles/responsibilities will include:• Translate marketing inputs into detailed requirements and planning documents• Design, code, debug, document and maintain software code in LabVIEW and C/C++/C#.• Plan and execute software releases• Plan and accomplish goals relying on experience and judgment Your qualifications/skills should include:• BS in Electrical Engineering, Computer Engineering or related field; MS preferred• 7+ years experience in automation, data acquisition, or related software development• Experience with National Instruments LabVIEW, Test Stand, and related tools• Experience developing user interfaces with National Instruments tools• Experience with defect tracking, configuration management and version control tools• Knowledge of C, C++, and real time operating system functionality a plus• Familiarity with all aspects of automation engineering including mechanical, electrical, controls, andinstrumentation disciplines• Experience with serial communication and networks in general• Experience integrating automation systems• Good knowledge of computer hardware and systems• Understanding of software process issues• Familiarity with SCRUM or other agile software development a plus• Experience in testing inertial sensors a plus• Must be a US Citizen or Permanent Resident

Please post this to the LabVIEW Job Openings board.

CUCM 7 software upgrade

Hi There
We are going to upgrade our CUCM7.1.3 to CUCM 7.1.5. We have 1 pub and 2 subs.
According to the Cisco document, once the software being installed, we just need to switch the version and the system will start and running with the new version.
My question is do we need to install the software on all 3 nodes and then switch the version or install on the pub first, restart the node without switch version, and do the same on the 2 other sub nodes and then switch version?
Thanks

Hi,
Install the upgrade file on Publisher first
Once finished on Publisher, install the upgrade file on the subscribers one by one or simultaneously
Do a switch version on the Publisher and let it boot into the new version and allow all the services to come up
Then do a switch version on the subscribers one by one or simultaneously
HTH
Manish

Documents To Go Software

Similar Messages

Maybe you are looking for