HOW TO DEFINE THE LOT SIZE THAT CONSIDERS MAX STOCK AND IN FIXED LOT
Hi Gurus,
I have a requirement where the client wants to procure the material in fixed lots of 125. they are using manual reorder point VB with reorder point of 100. The maximum allowed stock is 400.
When the MRP runs they want to generate a PR that is close to 400 and also a multiple of 125. I tried to use FX and it is only generating procurement proposal for 125. When I use HB it is considering the max stock but not generating the proposal in multiples of 125. Can anyone help me out with this.
Regards
Hi,
I think your problem could be solved by using rounding profile but not using
fixed lotsize.
In rounding profile you have to give threshold value and rounding value
For the threshold value 1------- Rounding value 125
threshold value 126------Rounding value 250
threshold value 251-------Rounding value 375
threshold value 376 -
Rounding value 400
Regards,
nandha
Similar Messages
-
How to scale the font size that make with the CanvasDrawText()?
Trying some ways but not any effectiveness.
DavidI would assume that you first have to generate a suitable metafont using, e.g., CreateMetaFont(). In the latter function you can specify the point size.
-
Can anyone tell me how to increase the text size in my menu bar and drop down menus?
Just bought a new 27" screen iMac. The menu bar and drop down menu text is much to small for me to see without leaning close to the screen. Does anyone know how to customize the text to a larger size. This is an issue for any program I open.
Once upon a time Apple displays packed in 72 dots to an inch (making their resolution 72 DPI). That meant that what we saw on screen at 100% scale was exactly what was printed on a printer - not to mention quite comfortable to read. However that advantage was eclipsed by the fact that photopgraphs and video were pixelated and the only solution to that was to increase the resolution - to pack in more dots per inch - which has the side effect of shrinking the size of text. Where I once used Word at 100% scale I now find it most comfortable at 150% scale.
There are several solutions. One, as Lex gave you, was to reduce the resolution of the LCD display. But unlike CRT displays, an LCD is tuned to a specific resolution and when you change it the results tend to be blurry. Another is to keep the resolution as it is and to adjust each program (if the program allows it). This makes Word usable and your browser can be set to use no font smaller than a size you set (which has some unpleasant side affects at some Web sites), but some programs and some parts of programs cannot be changed. The menubar and menus are among them. The third solution is one that Apple promised several years ago but has not yet provided - a resolution independant GUI. We can only hope that comes soon. And there's another partial solution - look in System Preferences under Accessibility. -
How to change the font size of the text that is revolving ?
Hi there,
I am using the Revolution theme.
How to change the font size of the text that is revolving (on the first menu page) ?
ThanksYou can't. That's hard coded into the theme.
OT -
How to define the size of private folder in Easy DMS?
Hi,
I have to ristrict the user to keep the data in private folder after the maximum limit
please help me how to define the private folder size in easy DMS.
after the limit user is not able to keep data in private folder.Hi,
This can be done in SAP Customization / SPRO
Pl. check :
Cross-Application Components>Document Management>Control Data>Define Document types
Here the size limit can be defined.
Also check : http://scn.sap.com/community/plm/document-management/blog/2014/06/20/how-to-create-dir-and-document-type-in-dms
Hope this helps
Regards,
Remi -
How to see the tablespace size
hi
how to get the tablespace size??
thxHello,
select SUM(bytes)/1024/1024 MB from dba_data_files
where tablespace_name = 'xxxxxx';
works fine.
I am trying to build a function for that:
select SUM(bytes)/1024/1024 MB
from dba_data_files
where tablespace_name=upper('&user')
However, I need to make some enhancements:
1. how to make comments in sql files?Refer to the REM statement in the sqlplus reference manual
2. a lot of outputs are generated:
SQL> @get_size
Enter value for user: tts1
old 3: where tablespace_name=upper('&user')
new 3: where tablespace_name=upper('tts1')
MB
2048
how to avoid that so that only the size is
displayed.
for example:
SQL> @get_size
Enter value for user: tts1
MB
2048
Refer to set verify off in the sqlplus reference manual.
>
3. how to let the function accept a parameter such
as:
SQL> @get_size tts1
Refer to the define command in the sqlplus reference manual.
>
4. how to include a usage (help) to that function
such as:
SQL> @get_size
usage: get_size <tablespace name>
Many thanksRefer to the prompt statement in the sqlplus reference manual.
Sybrand Bakker
Senior Oracle DBA -
How to change the font size of text element in smartform
Hi
i want to know how to change the font size of text element in smartform
regards
GincyHi
You can create Smartstyles, in which you can define paragraph formats for texts and character formats for character level changes.
Paragraph format ---> alignment, font size etc
character format for ---> superscript, subscript.
After creating, in your smartform, there will be a option in the text element to enter a style.
You give the created style and you can use the paragraph and character formats i that style.
Hope this is clear..
Regards
Sekar -
How to define the application parameter 'sap.xss.BaseConfigurationID'
Hello All,
I am developing a webdynpro ESS custom self service application. I have completed the development of the DC. But at the end when I am creating the application for the DC, I am not able to figure it out how to define the application parameter 'sap.xss.BaseConfigurationID' for the application. I have defined remaining all the parameters as specified in the following link.
[http://help.sap.com/erp2005_ehp_03/helpdata/EN/43/3b95dab4ab1800e10000000a1553f6/content.htm]
Could any one please detail the process to define the parameter 'sap.xss.BaseConfigurationID' ?
Thanks a lot.
Regards,
Seshu.Pick a representative file.
Get info. (Command-i)
There you will see a place "Open with" where you can select the application for that file.
Hit the "Change all..." button to do this for all files of this type.
charlie -
[web gallery] how to define the export color profile
Hello,
I'm currently working on a web gallery template wich will create both web size and full size images. It will allows my clients to directly download the images they want for their article, and save me a lot of time for the uploading process.
This step is done. I've found in other web templates how to do the multiple sizes. You can have an example here: http://nack.ch/series/biscuits/index.html
But as I often work for press, I'd like to be able to export my images in a profile like ProPhotoRGB or AdobeRGB instead of sRGB. Is there a way to do that?
I suspect there should be a photoSizes.*. function that I have to insert in my galleryInfo.lrweb, but I didn't found a listing of the different parameters we can set for web galleries.
Have you any idea to solve this problem or at least where I could find any information about that?
Best regards
NielsSorry, there is no way to do this in the 2.x SDK.
We'll keep your request in mind for a future version.
- Andy -
How can validate the ASM size and free space correctly?
Dears ,,
I faced problem in ASM size as it appeared in alert file as below
ORA-19504: failed to create file "+DG_DATA"
ORA-17502: ksfdcre:4 Failed to create file +DG_DATA
ORA-15041: diskgroup space exhausted
So we resize ASM space and large it. But we faced the same problem also although there is free space in ASM.
It seems that the shown free space is not real.
How can validate the ASM size and free space correctly?
Thanks & Regards,,*Oracle DBA* wrote:
Dears ,,
I faced problem in ASM size as it appeared in alert file as below
ORA-19504: failed to create file "+DG_DATA"
ORA-17502: ksfdcre:4 Failed to create file +DG_DATA
ORA-15041: diskgroup space exhausted
So we resize ASM space and large it. But we faced the same problem also although there is free space in ASM.
It seems that the shown free space is not real.
How can validate the ASM size and free space correctly?
Thanks & Regards,,
I was having this problem. Im my case i couldn add datafiles to a tablespace despite the fact that i was having a lot of space in the asm. Try rebalancing. It might help. In my case rebalancing also didn work because it seems that there need to be a threshold space in all the disks for the rebalancing to happen which was not in my case, so i had to shrink some unused space in the tablespace and then after gaining the required space I rebalanced the disk and then the disks got rebalanced, also i was able to use the free space that was showing . -
I cannot figure out how to change the photo size on my iPhone 5s. The first time I took a pic it asked if I wanted smalll, medium or large and listed the pixels. I chose small but am now finding that is too small. Can anyone help me set it to medium now? I can't find any setting for that. I'm a newby to iPhones and have no idea what I'm doing. Thanks for any help you can offer.
By "sending" do you mean sending email?
If so, what app are you using to take the photos on your iPhone 5? Or are the photos from a different source (saved to your Camera Roll from somewhere else, like a web page or Messages)?
My guess is that Mail gives you the option to send different file sizes when it detects you are trying to Mail a really large photo file. The size of photos on the iPhone 5 is really big and some email providers may stop your mail from being delivered if attachments are too large. Thus, Mail tries to help you by offering to resize the photo.
I suspect that if you are sending smaller files, Mail does not bother giving you options to save a smaller version. In fact, I have seen this behavior. So, if the photo is already "small enough", it gets sent as-is.
To my knowledge, there is no global iOS setting for this. Some apps may have different rules, of course. -
How to get the file size (in bytes) for all files in a directory?
How to get the file size (in bytes) for all files in a directory?
The following code does not work. isFile() does NOT recognize files as files but only as directories. Why?
Furthermore the size is not retrieved correctly.
How do I have to code it otherwise? Is there a way of not converting f-to-string-to-File again but iterate over all file objects instead?
Thank you
Peter
java.io.File f = new java.io.File("D:/todo/");
files = f.list();
for (int i = 0; i < files.length; i++) {
System.out.println("fn=" + files);
if (new File(files[i]).isFile())
System.out.println("file[" + i + "]=" + files[i] + " size=" + (new File(files[i])).length() ); }pstein wrote:
...The following code does not work. Work?! It does not even compile! Please consider posting code in the form of an SSCCE in future.
Here is an SSCCE.
import java.io.File;
class ListFiles {
public static void main(String[] args) {
java.io.File f = new java.io.File("/media/disk");
// provides only the file names, not the path/name!
//String[] files = f.list();
File[] files = f.listFiles();
for (int i = 0; i < files.length; i++) {
System.out.println("fn=" + files);
if (files[i].isFile()) {
System.out.println(
"file[" +
i +
"]=" +
files[i] +
" size=" +
(files[i]).length() );
}Edit 1:
Also, in future, when posting code, code snippets, HTML/XML or input/output, please use the code tags to retain the indentation and formatting. To do that, select the code and click the CODE button seen on the Plain Text tab of the message posting form. It took me longer to clean up that code and turn it into an SSCCE, than it took to +solve the problem.+
Edited by: AndrewThompson64 on Jul 21, 2009 8:47 AM -
Hi, I am using Indesign CS6, How to set the page size in Inches.
Hi, I am using Indesign CS6, How to set the page size in Inches.
All fields in InDesign can be entered in any measurement system. So, if you want to make an 8"x10" document and go to File>New Document and the window looks like this:
…you can type either 8 in or 8" into the Width field like this:
…and when you move to the next field, it will convert the eight inches into the equivalent number in the unit of measure that it is using at the moment, like this:
… (203.2 milimeters is the same as 8 inches). You can also enter a different measurement unit into other fields once the file is created, such as the width or height of a frame, or the position of an object in the X and Y coordinates.
If you would rather just work in inches instead of having to type the inches mark or abbreviation, go to InDesign>Preferences>General and select the Units & Increments tab. There you will see Ruler Units for Horizontal and Vertical at the top of the window. Set them to Inches and all of the fields will display in inches. If you do that to an open document, you will change the unit of measure for that document. If you do it while no documents are open, it will change the unit of measure for any new documents you create. To change the unit of measure for existing documents, you will have to open each and make the change. -
How to change the font size of text and case in smartforms
hi,
could any one explain how to change the font size of text in smartforms. ex. previously i had taken P4 left aligned and C6 but now i want to decrease the font without making it bold. pl......... guide me
secondly the value which are coming from tables are upper case but i need lower case. pl. guide
thanking ucheck out the smart styles...create a font of ur size n use.
Define the paragraphs & character formats using SMARTSTYLES & use them in your smartform.
You have to give the smartstyle name in the Form attributes-->Output options for the formats to be used in your smartform.
You can define font size in Smartform Style.
Smartform Styles > Charcterformat> Font --> size.
to load the font to SAP server chk this
Re: Adding a new font for SAPscript/SMARTFORM output
Regards
Vasu -
How to change the font size of Text Box Properties Appearance tab into 2 decimal digit.
How to change the font size of Text Box Properties Appearance tab into 2 decimal digit. I am uanble to modify it to 5.38 pt for example. Its only allowing to 1 decimal place.
Click on each field and the choose Properties from either File menu (or if on Mac hold dow mouse button until context menu appears choose properties)
go to Font
choose desired size and type font,you can choose to make this the default.
Do this with each field.
Or if you have a lot of fields:
while one is selected select all of them
then go to fonts in properties
change Font and size and make default.
Maybe you are looking for
-
Issues Syncing w/ iPhone 3G (iTunes 9) - Windows 7 (64-bit) OS
After downloading iTunes 9, I've been having issues syncing my iPhone. I've tried every option available to me and have scoured many a forum to seek some form of solution to this. I've, unfortunately, restored my iPhone and managed to lose all of my
-
My Photo Stream is no longer adding photos to iCloud for PC WINDOWS 7. any idea why?
-
Producer to N Consumers notification
Hi, I have the following situation (see also attached vi, made with LV2009SP1): 1) one producer that is used as a "commands generator" for the consumer threads 2) three consumers threads, each of them makes a particular task (let's say they checks so
-
How to set focus order of multiple Component in a Frame
I have created a Frame with contain some Label, Textfield, Choice and Buttons How do set focus order on these Components
-
Problem finding process WSDL after deployemnt to server
Using: BPM Standalone Server 10.3 (o/s Red Hat Linux 5.0) Oracle BPM Studio 10.3 (Windows XP) I have exported a BPM project and deployed it to the Server using the BPM Processes Admin console. When running the project locally, I was able to target th