How to deinstall when OUI fails?

I am trying to deinstall oracle 11g from my machine. I follow the instructions to use the Oracle Universal Installer. When I execute the OUI, I get a failure and one of those "do you want to send the error report to Microsoft?" prompts. There is no useful description of the error message.
So... how can I proceed from here? Am I just SOL and need to reinstall Windows to clean Oracle off of my machine?

I am not sure but try this.I done it in 10g
1.Shutdown the database
2.Delete the database
3.Delete all the folders one by one available in oracle_home
4.Manually delete the services
5.Go to registry editor(type REGEDIT in cmd) and find the oracle related files and delete all that.
6.I am sure one or two folders 'll not be deleted by doing this.But try again to delete that after re-booting the system.
Try it and let me know.
Thanks
Saravanan.R

Similar Messages

How do I deactivate online (needed when computer fails)?

Problem: When a computer fails with Adobe products installed, it is always a problem to do deactivation of license keys.
When I login to my account at adobe.com, I can see my licenses. I would have expected that I could manage my activations there. How can we get Adobe to provide license key activation management online? When computers fail, right now, there is no way to re-install Adobe software on the replacement computers because Adobe think I've used up my total activations.
Without an solution within my adobe.com account, I always wind up spending HOURS talking with Adobe people. It is a very frustrating process. Please see below the 1 hour communication I had today that got me nowhere.
Steve Amerige
Mohammed: Hello! Welcome to Adobe Customer Service.
Steve: The serial number in my account is xxxx-xxxx-xxxx-xxxx-xxxx-xxxx
Mohammed: Hi Steve
Steve: Began my day with a hard-disk failure.
Mohammed: May I please have your email address registered with Adobe while I review your request?
Steve: [email protected]
Steve: It's also my AdobeID
Mohammed: thank you for your emailaddress.
Steve: I had both CS 5 Master Collection as well as Acrobat Professional (xxxx-xxxx-xxxx-xxxx-xxxx-xxxx) installed on the computer whose hard drive failed.
Mohammed: Than you for the information.
Steve: It is possible that I installed Acrobat Pro Extended on that computer instead... I have license for that: xxxx-xxxx-xxxx-xxxx-xxxx-xxxx.
Steve: Since the computer has crashed, I'm not sure which version of Acrobat I installed on it.
Steve: Anyway, I don't want to have any problems once I start reinstalling the Acrobat and CS 5 Master Collection software.
Mohammed: According to the End User License Agreement (EULA) law, it is recommended to install the Adobe Software on only two computers and that is mentioned on the End User License Agreement when installing the Software provided the Software is not used simultaneously.
Mohammed: However, you can install the Software on the third Computer by de-activating the Software from one of the older one and then install it on the new one so that you can avoid any error message while activating the Software.
Steve: I cannot de-activate the software... the hard drive has failed.
Mohammed: Thank you for the information. Please allow me 1-2 minutes while I check with the information.
Mohammed: I check the information. Still you have the activations left. You can activate the software.
Steve: I had the software already installed on 2 computers: my home computer and my work computer.
Mohammed: May I know what kind of errors your getting?
Steve: My work computer is the one that had the hard-disk failure. Did you verify license availability for both of the serial numbers: xxxx-xxxx-xxxx-xxxx-xxxx-xxxx (CS5 Master Collection) and Acrobat Pro (xxxx-xxxx-xxxx-xxxx-xxxx-xxxx) and Acrobat Pro Extended (xxxx-xxxx-xxxx-xxxx-xxxx-xxxx)?
Steve: I have not yet begun the installation... I have to finish loading the operating system first. I just remembered the last time this happened that I had problems with activation. I don't want problems this time.
Steve: Adobe should provide a website to manage activations. When computers fail, it is not possible to deactivate.
Mohammed: This seems to be more of technical issue and Since I from Customer Support, In this case I will suggest you to contact our Specialized technical support team so that they would be able to resolve the issue better. I will provide you with the contact details for technical support team, Is that okay with you?
Steve: Sure
Mohammed: You can directly contact our technical team at 800-833-6687.
Mohammed: Is there anything else I can help you with?
Steve: You can put in a suggestion that customers can manage their activations by logging into their online account. When computers fail, this would be the only way they can manage activations.
Mohammed: Thank you for waiting. One moment please.
Mohammed: Thank you.
Mohammed: Is there anything else I can help you with?
Steve: Yes, how do I submit a feature request to have online activation management?
Mohammed: In this case you can contact us back.
Steve: ??? Okay... why not now?
Mohammed: Okay in this case please contact technical team.
Steve: And, how do I do that? I just want to put in a feature request that activations should be managed online in my adobe.com account.
Mohammed: I'll be right with you.
Mohammed: Please follow the below steps to de-activate the product:
Mohammed: *Ensure that the computer on which you have the software installed is connected to the Internet.
Mohammed: *Select Deactivate from the Help menu in the product you want to deactivate.
Mohammed: *Select Deactivate Permanently.
Mohammed: Once you de-activate the product from the old system, you will not have any issue while activating the product on the new system.
Steve: You've got to be kidding me! Did you forget that my hard-drive failed? Are you a real person or some software that is trying to answer my questions?
Mohammed: I am sorry that is for future reference.
Steve: As I said before, my hard-drive failed. I cannot deactivate the license. I called the phone number you gave me. Adobe is not yet open, so at the moment I have no solution.
Steve: I will call them and see if they are able to help me. But, I want to know how I make an official request that Adobe allow for online license key management from within my adobe.com account.
Mohammed: I am sorry, please stay online while I check with the activation seat for the serial number you have provided above.
Mohammed: Steve, in case of hard drive crash or any unavoidable situations, you can contact us while activating the product so that we can make necessary changes to the license and allow you to activate the product again with out any issues.
Steve: Okay... I'll proceed. But, you still haven't answered my last question: how can I make an official request that Adobe allow for online license key management from within my adobe.com account?
Mohammed: Steve, you can leave your feedback here on chat so that I can escalate the same to higher level of support to check with this.
Mohammed: Is that fine?
Steve: Yes... please do escalate this so that the feedback can be used.
Mohammed: Thank you.
Mohammed: Is there anything else I can help you with?
Steve: No. I will call the number you gave me when they open. Until then, there is nothing for me to do except to begin the installation again, wait for the problem, and then re-start a new support session. I wish Adobe could manage activations online, but I do understand that you can't at this moment do anything about it. Have a nice day.
Mohammed: Sorry for the wait. Please do stay online.
Mohammed: Thank you.
Mohammed: May I please have your email address registered with Adobe while I review your request?
Mohammed: Thank you for contacting Adobe. We are available 7 days a week, 24 hours a day. Goodbye!

You simply call support by phone and have them reset activations. At this point there is no way to manage that yourself.
Mylenium

How to Configure Email for a Specific job when its Fails

Hi
We have So many jobs running in our HR system and BW systems but with no proper Monitoring Configuration. We have Solution manager 7.0 with EHP latest version with CCMS configured. How to setup the email in Solution Manager using CCMS when Job failed?
Is there any standard way of doing it from HR system and BW system other than using solution manager? so that we can use it for Temporary solution.
Thank you for you support
Regards
Bhaskar

Hello Bhaskar,
I recommend to use SAP CPS by Redwood to schedule you BW and of course also your HR jobs.
Please check out the following document:
SAP CPS by Redwood - Increasing the Value of SAP NetWeaver Business Intelligence
Scheduling
The monitoring capabilities fo SAP CPS are described in the documentation:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/0a/1a5678b72c418d96242330b96473c6/frameset.htm
You can use SAP CPS together with SAP Solution Manager free of charge (and even the OEM license for SAP CPS is free of charge). This way you can also combine SAP CPS and Business Process Monitoring in SAP Solution Manager.
/people/martin.lauer/blog/2009/05/11/process-scheduling-adapter-for-sap-solution-manager-for-everybody
Kind regards,
Martin
Job Scheduling Managment - http://service.sap.com/jsm
SAP CPS - Scheduling

HT2173 How to know when a hard drive has failed ?

How to know when a hard drive has failed ?

Machine doesn't boot. You experience strange crashes. Gets wrong results. Your harddrive is five or more years old. Time to consider repacing it.   You do have backup?
You may want to run these "standard" fixes if the problem persists.
1) Check the amount of free space on your harddrive. You should have a several gigs free.
2) You should run disk utility
     a) verify the disk
     b) update your permissions.
3) Try a safe boot.
    Shutdown your machine. Hold down the shift key. Poweron. Wait awhile Wait awhile while you harddrive
      is being checked.
    http://support.apple.com/kb/ht1455
4) You may want to run applejack to clean up your machine.
     http://applejack.sourceforge.net/
a lot more ways to fix your Mac.
http://www.thexlab.com/faqs/faqs.html
verify & repair your startup drive
To verify & repair you file system on the startup drive, you will need to run disk utility from you installation DVD.
This article will tell you how to get to disk utility. Once in a disk utility, you can go and attempt to recover the disk.
http://support.apple.com/kb/TS1417
To repair your startup drive, you will need to run disk utility from your startup DVD.
Mac OS X 10.4: About the utilities available on the Mac OS X 10.4 Install DVD
http://support.apple.com/kb/HT2055
How to run disk utility from your startup DVD.
Insert your startup DVD into your reader. Power down your machine. Hold down to the c key. Power on your machine. This will bootup your startup DVD.
This will bring you to a panel asking you for your language. Pick your language.
You you come to the Install Mac OS panel. Do not install.
Click on Utilities menu item. This will give you a pulldown list of utilities.
Click on the disk utility.
You are now in disk utility. Pick your disk. Click on repair it should be on the lower right of the panel.
Once the repair completes successfully, you should update your permissions.
Verify a disk
As an alternative, you can verify that the filesystem on the disk is correct. You will not be able to repair the file system.
I suggest that you use disk utility to verify that your startup disk is OK.
Macintosh-HD -> Applications -> Utilities -> Disk Utility
Start up disk utility. On the left pane view, you will see a list of all your disks.
Click on your startup disk.
Click on the First Aid Tab.
Click on verify.
Hopefully your disk will verify. If not, you have to boot from your installation DVD and run Disk Utility from there to attempt to repair your file-system.

HT201250 My time machine back has been working perfectly well until yesterday when it failed. The error message I get is Files can't be copied onto the backup disk because it appears to be read-only. How do I fix it?

My time machine back has been working perfectly well until yesterday when it failed. The error message I get is Files can’t be copied onto the backup disk because it appears to be read-only. How do I fix it?

Hello,
http://pondini.org/TM/C6.html

How to run change run in process chain when it fails

HI All,
How to run attribute change run in process chain when it fails. Give me the procedure with clear description. Is there is any difference with 3.x versions in running this.
Thanks,
Pratap Reddy

Hi Pratap.
If BI Accelerator is not being implemented by ur company, in that case if change run fails u'll proceed by 'Repeat' process option as usual we do in 3.x.
If BIA is exists, in this scenario u can not repeat as we do in 3.x. U have to drop the indexes on cubes effecting that change run and run the change runs. Once it is finished recreate BIA Indexes on cubes.
Warm Regards,
Ramki

How to trigger email notification when users fail to reset your password in fim 2010 r2.

Hi,
how to trigger email notification when users fail to reset your password in fim 2010 r2
Regards
Anil Kumar

Hi Sylvain,
I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
check Advance View of Set this gives
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
But this is not working for me so please tell me where i am wrong.
Regards
Anil Kumar

How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2

Hi,
How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2
Senario:I want put wrong answering to the Questions that i was during registration if i give wrong answers to the questions then a Email Notification should be trigger to Users.
Regards
Anil Kumar

Hi Sylvain,
I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
check Advance View of Set this gives
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
But this is not working for me so please tell me where i am wrong.
Regards
Anil Kumar

When idoc failes for inbound sales orders then how to trigger a mail notifi

Hi All,
When idoc failes for inbound sales orders in SAP then i would like to send an email notificaiton to particular user id. Could you please let me know the settings for this requirement.
Thanks in advance..

Closing thread as there are no replies

VB11 Material Determination - How to substitute only when ATP fails?

I created a material determination rule with VB11 (A is replaced by B).
However, my intention was to has A replaced by B only when ATP fails in SO....
Now I have A replaced every time....
I tried to create two lines: A=>A, A=>B as alternative, but A is always replaced by A now...
Did I miss anything?
Thank you!

Its possible to do this. Please do as below.
Ex: xyz is the main item and abc is the substitution item which needs to be activated only when xyz qty is less)
1. Under VB11 maintain the following records:
For Reason : Z003 (ATP Check)
Material Entered is XYZ and Substitution Materials are XYZ and ABC.
Basically Material XYZ substitutes XYZ and if the qty is less it substitutes ABC.
2. Substitute Reason Settings are as under (SPRO):
Reasn Z003
Description Availability check
Entry
Warn
AvCh dep. X
Strategy
Outcome B
Category
This will work wonderfully...
Hope this helps...

How do I restore a failed external hard drive using Time Machine?

I have an external hard drive connected to my iMac that is being backed up with Time Machine. I just realized that should it one day fail and no longer appear as a connected device, I'm not sure how to restore its data to another external drive. When I disconnected the external hard drive (to mimic a drive crash) and entered Time Machine to see if I could verify that the external hard drive was, in fact, being backed up - I didn't know where to find it. Under the Today (Now) information, I didn't expect to see it there as it was no longer connected to the machine. But when I went back a few days, I expected to see its backup appear in the Sidebar. But no!
So - how do I restore a failed external hard drive using Time Machine?
Searches for this information on Google yielded "iffy" results. I'm hoping someone here is able to offer some clear steps to follow. Perhaps I'm missing something silly. Thank you very much!

I came across this discussion after encountering the same problem. Since my internal HD was cose to full I added an additional external HD to my setup. I moved my iPhoto files to an external HD and backed both this external HD and my internal HD up with Time Machine to another external HD. So far the theory. When I wanted to test if this setup worked I noticed that I could only see my iPhoto libraries on the external HD in Time Machine when the external HD was connected to my computer, but not if I turned it off. This led me to search for a solution on the Apple Support Communities discussion board.
The suggestions made Kappy seem right, at least in my experience, in that my Time Machine simply did not back up the external HD until I followed the steps he suggested above. These were the following:
"So, if you want it backed up then here's what you need to do:
1. In Time Machine preferences remove the external drive from the Exclude list.
2. Verify that it is now included with your other drive in the backup list.
3. Do a Backup Now to create a new backup of the external drive."
After doing this, my external HD showed up in the Backups.backupd as a seperate folder. I could clearly see the Time Machine back-up for my internal HD and my external HD. In addition, in Time Machine itself I was able to find the external harddrive by clicking on my own computers name under "Devices". I hope my experience helps to resolve your issue as this discussion board has helped me resolve mine (which I believe to be very similar).
Cheers!

How to click, when "right-click dominant" is turned on?

My sister is on a 17 hour train ride now with her new macbook with Leopard. She doesn't have a mouse/wacom tablet with her now. Without knowing the implications fully, she went into the mouse settings, and turned on "right-click dominant". Her computer only has one click button, which now brings up the mini-menu that comes up with a right-click. Control-click does the same thing. She is stuck. She can't get back into the preferences to unclick the setting, because she can't click.
Is there a way?? How to click, when "right-click dominant" is turned on?

I am not familiar with the term "right-click dominant". The mouse section of the System Preferences has a "primary mouse button left/right" setting, but that affects the mouse, not the track pad. I would try all the modifier keys (and combination of) I can think of to see if one switches the track pad click. If that fails, a restart (press the power button and return) might straighten it out.

How to deinstall Oracle Developer 2000 6i and again install properly

hi
My HDD is partitioned as C,D,E and F. Oracle 9i is successfully installed in my system in C:\ drive (C:\oracle)and it's running fine. when i was going to install Oracle Developer 2000 6i in F:\ drive it dint show neither any error message nor message like successfully installed but all icons are there. when i was started the forms buider it's showing " ORA-12154: TNS: could not resolve service name" error. how to run forms builder? i have installed in XP. should i deinstall Oracle Developer 2000 6i? if yes, how to deinstall that and how to install it properly?
should i install oracle 9i database before and then oracle developer 2000 6i or vice versa???
will be waiting for your valuable suggestions.......
thanks & regards,
Priyatosh

hi
the tnsnames.ora file is in F:\oracle\Frm61\NET80\ADMIN. i have attached the contents of that file below. i don't know where to change and what to change.
Beq-local.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = beq.world)
(PROTOCOL = BEQ)
(PROGRAM = oracle73)
(ARGV0 = oracle73ORCL)
(ARGS = '(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')
(CONNECT_DATA = (SID = ORCL)
Tcp-loopback.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = 127.0.0.1)
(Port = 1521)
(CONNECT_DATA = (SID = ORCL)
Example1.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = Production1)
(Port = 1521)
(CONNECT_DATA = (SID = SID1)
Example2.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = spx.world)
(PROTOCOL = SPX)
(Service = Server_lsnr)
(CONNECT_DATA = (SID = ORCL)
Example3.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = nmp.world)
(PROTOCOL = NMP)
(Server = FinanceServer1)
(Pipe = ORAPIPE)
(CONNECT_DATA = (SID = ORCL)
please help me out.....
thanks & regards,
Priyatosh

How to make scheduled jobs Fail if the return partial results?

How to make scheduled jobs Fail if the return partial results?
Does anyone know if there is a way to do this?
We have a number of reports that we schedule to various locations in Excel and PDF. We are frequently getting problems which are manifesting themselves as empty data providers and if we run them as Web Intelligence reports it says Partial Results. Re running the reports normally fixes the problem and returns the data correctly but the problem is that the scheduler reports them as successful and the emails or files get distributed (causing our customers to complain!!!).
Currently using XIr2 +SAP integration Kit migrating to XI 3.1 in July 2009
Any ideas/suggestion would be appreciated...
I did find reference to the adapt case ADAPT01122128 which may help but when and if are unkowns so not much help.
Ta
Nick

This may be helpful to some people:
http://blogs.sun.com/milan/entry/using_web_service_to_send

CRS oui failed to find the node

Hi every friend,
I am trying to install the CRS on 2 solaris 9 (VERITAS CFS). But when the oui came to the page "Specify Cluster Configuration" page, The OUI can not find any node and also the ADD, EDIT , REMOVE three buttons unpressable with grey color. From the help I know that when OUI detect the third-party vendor clusterware, It will use the node infomation obtained from third-party vendor clusterware and these infomation is not able to be edited by OUI. But it seems that it can not obtain anynode infomation. I had ping the PUB/PRIV IP of both node and they are accessible. How can I make the OUI to find the node infomation?
Thank you very much!

Hi,

Yes, it is. 
Environment >> Servers >> jmsserver2 >> Configuration >> General > Machine : sv-jms2

regards
 Lukas 
 WLS 9.2

How to deinstall when OUI fails?

Similar Messages

Maybe you are looking for