How to delete a DAC block inside a sub-block by using script?

Hello,
how can I delete a DAC block that’s inside a sub-block diagram using a script?
The command
call SCHEMELOAD("xxx")
call BlDel("yyy")
only deletes blocks that are in the highest level of the actually loaded block diagram, not blocks that are in a sub-block diagram. (DIAdem 2012)
regards,
Eric

Hi Walter,
I don't need to delete a sub-block, I'd only like to delete blocks which are placed inside a sub-block.
All other commands I tried work for blocks no matter where they are inside a block diagram. For exaple: You can put a math formula block inside a sub-block wich is inside a sub-block which is inside a sub block and it does change the formula by script command.
But when using the command Bldel it deletes all blocks but not the ones inside a sub-block.
regards, Eric

Similar Messages

How to delete the photo-storage (phone shows that 21GB is used but no photo is on it) ?

How to delete the photo-storage when phone shows 21 GB used and no photo is on the phone?

Look at 'PhoneClean'
<http://www.imobie.com/phoneclean/download.htm

How to get the kerning value and set it to back use script?

hi,guys
I come back again.
I encountered a kerning problem.
how to get the kerning value and set it to back use script?
Thanks very much!

For both cases, the filename can be found on the FILE.ReceivedFileName Context Property. You can access this Property in a Pipeline Component or Orchestration and take any action you want, such as apply to a database.
The value is accessed by: MyReceivedMessage(FILE.ReceivedFileName)
In the case of a duplicate EDI Interchange, you would use the Failed Message Routing feature to capture the error message with either an Orchestration or Send Port.

How to verify lockout treshold and duration set bij local GPO using script

Hi all,
I want to succeed in veryfying the account lockout treshold and duration by checking registry.
However this is impossible in server 2012 r2. previously these settings where visible in the registry but now it seems that they are hide in the SAM section which is not accessible.
WMI RSOP does not contain information as it is no group policy.
Any alternatives?
Kind rergards,
AL

Hi AL,
>>how to verify lockout treshold and duration set bij local GPO using script
What does this mean? Does this mean that we are using a standalone server and want to check the account lockout policy set via local GPO?
>>Just found that using net accounts the local gpo settings are shown not i have to find a way to strip that using powershell to be able to veriy the correct line and content
What do we want to achieve here? As you stated, we can run net accounts
command to check password policy and account lockout policy. Besides, we can also run command
gpreult/h report.html with admin privileges to collect group policy result report to check this.
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to prompt user to select multiple files in file dialog using scripts

Hi, is there a way to allow user to select multiple files inside the file dialog using scripts? So not just something like "*.ai" or "*.eps" but where the user can actually use their shift key to select a batch of files inside the file dialog and then the script would process each one.
Thanks!

// Main Code [Execution of script begins here]
here's what I have so far. it would also be nice to not have illustrator stop at errors.. right now, it skips dialogs but on errors, it still stops.
// uncomment to suppress Illustrator warning dialogs
app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;
var destFolder, sourceFolder, files, fileType, sourceDoc, targetFile, pdfSaveOpts, folderName;
var fullPath = "";
var finalSlash;
// Select the source folder.
sourceFolder = Folder.selectDialog( 'Select the folder with Illustrator .ai files you want to convert to PDF');
f = find_files(sourceFolder);
function find_files (dir)
    return find_files_sub (dir, []);
function find_files_sub (dir, array)
    var f = Folder (dir).getFiles ("*.*");
    for (var i = 0; i < f.length; i++)
        if (f[i] instanceof Folder)
            find_files_sub (f[i], array);
        else
            if (f[i].name.slice (-3).toLowerCase() == ".ai"          || f[i].name.slice (-4).toLowerCase() == ".eps")
                    //convert the array-listing to a string so we can manipulate it
                    fullPath = String(f[i]);
                    //find the position of the last / to indicate where the filename starts
                    finalSlash = fullPath.lastIndexOf("/");
                    //get the foldername by "slicing" from start to where finalSlash is located
                    folderName = fullPath.slice(0, finalSlash).toLowerCase();
                    sourceDoc = app.open(f[i]); // returns the document object
                    // Call function getNewName to get the name and file to save the pdf
                                                  targetFile_PNG = getNewName(".png");
                                                  if(targetFile_PNG.exists) {
                                                  } else {
                                                            pngExportOpts = getPNGOptions();
                                                            sourceDoc.exportFile(targetFile_PNG, ExportType.PNG24, pngExportOpts );
                    targetFile_PDF = getNewName(".pdf");
                    pdfSaveOpts = getPDFOptions();
                                                  sourceDoc.saveAs(targetFile_PDF, pdfSaveOpts );
                                                  targetFile_SVG = getNewName(".svg");
                                                  svgSaveOpts = getSVGOptions();
                                                  sourceDoc.exportFile(targetFile_SVG, ExportType.SVG, svgSaveOpts );
                    sourceDoc.close();
                    array.push (f[i]);
getNewName: Function to get the new file name. The primary
name is the same as the source file.
function getNewName(ext)
    var ext, docName, newName, saveInFile, docName, finalDot
    var loop = 0;
    docName = sourceDoc.name;
    ext = ext; // new extension for pdf file
    newName = "";
    finalDot = sourceDoc.name.lastIndexOf(".");
    while(loop < finalDot)
        newName += docName[loop];
        loop = loop + 1;
    newName += ext; // full pdf name of the file
          newName = newName.replace(" [Converted]","");
    // Create a file object to save the pdf
    saveInFile = new File( folderName + '/' + newName );
    return saveInFile;
getPDFOptions: Function to set the PDF saving options of the
files using the PDFSaveOptions object.
function getPDFOptions()
    // Create the PDFSaveOptions object to set the PDF options
    var pdfSaveOpts = new PDFSaveOptions();
    // Setting PDFSaveOptions properties. Please see the JavaScript Reference
    // for a description of these properties.
    // Add more properties here if you like
    pdfSaveOpts.acrobatLayers = false;
    pdfSaveOpts.colorBars = false;
    pdfSaveOpts.colorCompression = CompressionQuality.AUTOMATICJPEGHIGH;
    pdfSaveOpts.compressArt = true; //default
    pdfSaveOpts.embedICCProfile = false;
    pdfSaveOpts.enablePlainText = false;
    pdfSaveOpts.generateThumbnails = false; // default
    pdfSaveOpts.optimization = true;
    pdfSaveOpts.pageInformation = false;
    pdfSaveOpts.preserveEditability = true;
    return pdfSaveOpts;
function getSVGOptions()
          var svgSaveOpts = new ExportOptionsSVG();
          //just using defaults aside from what's written below
//see http://cssdk.host.adobe.com/sdk/1.0/docs/WebHelp/references/csawlib/com/adobe/illustrator/ ExportOptionsSVG.html
svgSaveOpts.embedRasterImages = true;
svgSaveOpts.sVGTextOnPath = true;
          return svgSaveOpts;
function getPNGOptions()
          // Create the PDFSaveOptions object to set the PDF options
          var pngExportOpts = new ExportOptionsPNG24();
          // Setting PNGExportOptions properties. Please see the JavaScript Reference
          // for a description of these properties.
          // Add more properties here if you like
          pngExportOpts.antiAliasing = true;
          pngExportOpts.artBoardClipping = false;
          pngExportOpts.horizontalScale = 100; // scaling to 350%
          pngExportOpts.saveAsHTML = false;
          pngExportOpts.transparency = true;
          pngExportOpts.verticalScale = 100; // scaling to 350%
          return pngExportOpts;

How to delete multiple empty lines in item assignment block in WebUI

Hi Experts,
   When i am reading 'BTAdminI' context node data, I am getting empty lines along with data. I can able to delete only one empty lines when its executing second empty line its failing in loop. Can you suggest me how can i delete multiple empty lines. I am using below code.
DATA: lr_entity1           TYPE REF TO cl_crm_bol_entity,
        lr_current          TYPE REF TO if_bol_bo_property_access,
        lr_iterator         TYPE REF TO if_bol_bo_col_iterator,
        lv_strukname        TYPE strukname,
        dref                TYPE REF TO data,
        lv_thtmlb_tableview TYPE REF TO cl_thtmlb_table_view,
        lr_cn               TYPE REF TO cl_bsp_wd_context_node_tv,
        cr_mixed_node_tv    TYPE REF TO cl_bsp_wd_mixed_node.
    FIELD-SYMBOLS: <fs_line_structure> TYPE data.
    lr_iterator = me->typed_context->btadmini->collection_wrapper->get_iterator( ).
    TRY.
        lr_current = lr_iterator->get_first( ).
      CATCH cx_root.
    ENDTRY.
    WHILE lr_current IS BOUND.
      lr_entity1 ?= lr_current.
      CHECK lr_entity1 IS BOUND.
      lr_entity1->get_attr_struct_name( RECEIVING rv_result = lv_strukname ).
      IF lv_strukname IS NOT INITIAL.
        CREATE DATA dref TYPE (lv_strukname).
        ASSIGN dref->* TO <fs_line_structure>.
        IF <fs_line_structure> IS ASSIGNED.
          lr_current->get_properties( IMPORTING es_attributes = <fs_line_structure> ).
          IF <fs_line_structure> IS INITIAL.
            me->typed_context->btadmini->collection_wrapper->remove( lr_current ).
            EXIT.
          ENDIF.
        ENDIF.
      ENDIF.
      TRY.
          lr_current = lr_iterator->get_next( ).
        CATCH cx_root.
      ENDTRY.
    ENDWHILE.

Hi Nitish,
Try below code instead of your code,
Data:
lt_empty_lines TYPE TABLE OF REF TO cl_crm_bol_entity,
lr_entity TYPE REF TO cl_crm_bol_entity.
After getting collection from BTadmini use the below code.
lr_iterator ?= lr_coll->get_iterator( ).
    lr_entity ?= lr_iterator->get_first( ).
    WHILE lr_entity IS BOUND.
      IF lr_entity->is_send_active( ) EQ abap_false.
        APPEND lr_entity TO lt_empty_lines.
      ENDIF.
      lr_entity ?= lr_iterator->get_next( ).
    ENDWHILE.
    LOOP AT lt_empty_lines INTO lr_entity.
      typed_context->btadmini->collection_wrapper->remove( lr_entity ).
      lr_entity->delete( ).
    ENDLOOP.
Best Regards,
Dharmakasi.

How do I center an image inside a CSS div tag using dreamweaver?

I know this may seem like a very silly queston to ask because it should seem so simple but how do I do that? I am having trouble being able to center an image inside of a div tag. Here is the code I have come up with so far. Thanks in advance for your help.
</style>
</head>
<body>
<div id="PageContainer">
<div id="PageHeader"> img.centered{display:block; margin-left:auto; margin-right:auto; }<img src="Untitled-5.jpg" alt="rowland" class="centered" /></div>
<div id="PageMenu">Content for id "PageHeader" Goes Here</div>
<div id="PageBody">Content for id "PageHeader" Goes Here</div>
<div id="PageFooter">Content for id "PageHeader" Goes Here</div>
</body>
</html>
Also you can ignore the other div tags after the first div id. The first div id that has my image link is the one I am trying to get to center my image. The image is in there just not centering.

Centering Pages, Images and other elements with CSS:
http://cookbooks.adobe.com/post_Centering_web_pages_and_other_elements_with_CSS-16640.html
Nancy O.

How to delete a member in the EAS Outline by writing a script

Hi,
I have to delete a member from a the EAS outline. Tried deleting it manually. It throws a error stating that outline cannot be saved. Hence they restarted the services and i was able to delete the member manually. I later had a thought that may be we can write a calc script to delete that particular member. First i have to delete all the data in that member and then the member is empty after that delete the member. Not sure if we can do it. Can we do this process. If yes how do we need to go ahead with it. If there is any option pl. do let me know. I would like to avoid the manual deletion hence would like to automate.
It is a BSO cube.
Can anyone help me regarding this?
Regards
Praveena

To echo Glenn, if this a pure Essbase database (and I think it is), ODI's member deletion would be through a dimension load rule. There are multiple threads on this board about "remove unspecified". If there's another way to do it, I'd love to hear it.
However, if this the back end to a Planning application, ODI can do member, children of member, descendant deletes, etc. It all depends on what the target environment provides.
Regards,
Cameron Lackpour

Try block inside a try block - who is throwing StaleConnectionException?

int retry = 0;
try{ //MAIN TRY
//GET Datasource from context<---is this throwing?
boolean retry = false;
do {
     try {
          retry = false;
GET CONNECTION FROM DATASOURCE<--or shld this be?
     }catch(SQLException e) {
     //FIRST CATCH
     if (retryattempts++ < 3){
          retry = true;
} while (retry);
//DO something which requires try block
}catch(SQLException e)
{//Second catch
When I do this the StaleConnectionException is caught by the second catch... does this mean that the staleconnectionexception is thrown when getting datasource from initialcontext and not while getting connections?
Edited by: wannaBeACsGrad on Jan 10, 2008 9:09 AM

I am not sure what your are trying to do. Your code as posted is incomplete and could not possibly compile. The Try/catches do not seem to be nested.
More importantly, why in the world would you ever want to have a try inside a try? You can have a single try, then several different calls in loops or whatever that can potentially throw Exceptions and then have mulitple catch statements to handle them. For instance, you could have something like this:
try {
} catch (NullPointerException ne) {
   // handle null issues here
} catch (NumberFormatException nfe) {
   // handle number format issues here
} catch (Exception e) {
   // everything else falls here
}Keep in mind that you don't want to do any "Error Hiding". Make sure you handle each case appropriately.

How to find out that an art item has spot color using script?

Hi all,
I have a number of art items on a document, some of them are filled with spot colors and some of them are with process color.
Is there any method by which I can find out which color type(spot or process) is applied to the selected art item?
Thanx in advance...

Thanx for the reply carlos....
But I am not able to use "icolor.typename". There is nothing like "typename" showing in the properties.
I am using it like this:
var app:com.adobe.illustrator.Application = Illustrator.app;
                                        var pathArt:PathItem;
                                        var allPaths:PathItems           = doc.pathItems;
                                        if ( app.documents.length > 0 && doc.pathItems.length > 0)
                                                       var colorValue:com.adobe.illustrator.Color;
                                                       //Fill color to the selected object.
                                                       for (var i:int = 0; i < doc.pathItems.length ; ++i)
                                                                      pathArt = allPaths.index(i);
                                                                      if(pathArt.selected)
                                                                                     colorValue = pathArt.fillColor;
                                                                                     trace(colorValue.typename);              //But colorValue doesn't show any property like "typename".
Do am i missing some thing?
Thanks...

How to delete file from client machine

Hi all,
we are using the DataBase: oracle:10g,
and forms/reports 10g(developer suite 10g-10.1.2.2).
can anybody help me how to delete the file from client machine in specified location using webutil or any
(i tried with webutil_host & client_host but it is working for application server only)
thank you.

hi
check this not tested.
PROCEDURE OPEN_FILE (V_ID_DOC IN VARCHAR2)
IS
-- Open a stored document --
LC$Cmd Varchar2(1280) ;
LC$Nom Varchar2(1000) ;
LC$Fic Varchar2(1280);
LC$Path Varchar2(1280);
LC$Sep Varchar2(1) ;
LN$But Pls_Integer ;
LB$Ok Boolean ;
-- Current Process ID --
ret WEBUTIL_HOST.PROCESS_ID ;
V_FICHERO VARCHAR2(500);
COMILLA VARCHAR2(4) := '''';
BOTON NUMBER;
MODO VARCHAR2(50);
URL VARCHAR2(500);
Begin
V_FICHERO := V_ID_DOC;
LC$Sep := '\';--WEBUTIL_FILE.Get_File_Separator ; -- 10g
LC$Nom := V_FICHERO;--Substr( V_FICHERO, instr( V_FICHERO, LC$Sep, -1 ) + 1, 100 ) ;
--LC$Path := CLIENT_WIN_API_ENVIRONMENT.Get_Temp_Directory ;
LC$Path := 'C:';
LC$Fic := LC$Path || LC$Sep || LC$Nom ;
If Not webutil_file_transfer.DB_To_Client
LC$Fic,
'TABLE_NAME',
'ITEM_NAME',
'WHERE'
) Then
Raise Form_trigger_Failure ;
End if ;
LC$Cmd := 'cmd /c start "" /MAX /WAIT "' || LC$Fic || '"' ;
Ret := WEBUTIL_HOST.blocking( LC$Cmd ) ;
LN$But := WEBUTIL_HOST.Get_return_Code( Ret ) ;
If LN$But 0 Then
Set_Alert_Property( 'ALER_STOP_1', TITLE, 'Host() command' ) ;
Set_Alert_Property( 'ALER_STOP_1', ALERT_MESSAGE_TEXT, 'Host() command error : ' || To_Char( LN$But ) ) ;
LN$But := Show_Alert( 'ALER_STOP_1' ) ;
LB$Ok := WEBUTIL_FILE.DELETE_FILE( LC$Fic ) ;
Raise Form_Trigger_Failure ;
End if ;
If Not webutil_file_transfer.Client_To_DB
LC$Fic,
'TABLE_NAME',
'ITEM_NAME',
'WHERE'
) Then
NULL;
Else
Commit ;
End if ;
LB$Ok := WEBUTIL_FILE.DELETE_FILE( LC$Fic ) ;
Exception
When Form_Trigger_Failure Then
Raise ;
End ;sarah

How to delete tune without iTunes

Hi,
I have a problem, I have some old podcast which I like to keep on my harddrive. Then I got the ipod, so I want to store the podcast episodes there. But dragging direct from Finder to ipod show me it copied but didn't appear under podcast. I found out after a few trial and error that I should have added the podcast to iTunes before dragging into ipod. So...
Good : Finder -> iTunes Podcast -> iPod
Bad : Finder -> iPod
So now those files I drag direct from finder into ipod are in the ipod but I can't get rid of them, cause they don't show up in the iTunes list. It shows up in Senuti and iPodDisk, but both don't allow me to delete the song. Now I can't drag those podcast episodes in to ipod from iTunes podcast anymore. It somehow recognise that the file exist on the ipod but wouldn't list it on the podcast.
So, back to the question, How to delete tune without iTunes?? thanks

Did you try using the Finder? I'm trying to accomplish similar management tasks. Finder seems far superior to itune management, for podcasts management. This might work-- First quit itunes.
Use a finder window, not spotlight, search itunes and single-click on any folder by that name. Notice which of these files is in your startup disc (in case you have other bootable drives connected)-- Notice the little icons on the bottom of the Finder window. Double click on "iTunes Music" at the window bottom. A new Finder window should open. I recomend the list mode, selectable at the top left of Finder window. Now you should be able to view all your itune- contents on the computer. It seems these files can be deleted, but one must remeber to empty trash before going further. Unfortunately this approach won't allow adding new folders that will show up in itunes.

How do i delete an itunes account that i am no longer using?

i have an account that i never use and i have already deleted that email account so i need to know how to delete the account that i am no longer using

Stop using it.
There is no delete account option.

How to count number of lines inside methods() using the Doclet API

Wrote a custom doclet using the [Doclet API|http://java.sun.com/j2se/1.3/docs/tooldocs/javadoc/doclet/index.html ] .
The purpose for the doclet is to load Java source files and create stubs (which are identical Java source files but do not contain any method implementation details).
Instead, the method implementation details need to be replaced with blank lines...
public class MyDoclet {
     private static String TAB = "\t";
     public static boolean start(RootDoc root) {
          ClassDoc[] classes = root.classes();
          // Parse through class or interface
          for (ClassDoc clazz : classes) {
               Type superClass = clazz.superclassType();
               // Print Methods
               MethodDoc[] methods = clazz.methods();
               for (MethodDoc method : methods) {
                    Parameter[] parameters = method.parameters();
                    println();
                    if (!method.isPrivate()) {
                         print(TAB + method.modifiers() + " "
                                                + method.returnType().simpleTypeName() + " " + method.name());
                         print("(");
                         for (int i=0; i < parameters.length; i++) {
                              Parameter parameter = (Parameter) parameters;
                              print(parameter.type().simpleTypeName() + " " + parameter.name());
                              if (i != parameters.length - 1) {
                                   print(", ");
                         print(")");
                         println(" {");
                         println("\n");
                         println(TAB + "}");
          return true;
As one can see, I am just creating the method and placing the opening and closing curly braces (along with a new \n line escape sequence, in between).
Am not really that familiar with the Doclet API...
Question(s):
(1) What is the best way to figure out how many lines of code are inside each method and then use a for loop to insert the exact same number of blank lines inside the methods?
(2) Is there a way to do it using the com.sun.javadoc.SourcePosition.line() method?
Would really appreciate it if someone could help me because this is an important requirement (hence the 10 Duke Stars).
Happy coding to all,
Mike

This is not possible using the Doclet API, because JavaDoc does not store any information regarding implementation detail. Although MethodDoc#position will give you the line where the method is declared, there is no way to determine where the method body starts and ends.
If you need that much information, maybe you would be better of using a tool such as Eclipse's Abstract Syntax Tree parser. AST will provide you with line numbers for each code expression, hence it is relatively easy to compute the first and last line in a method body.

How to delete a whole line in cmd prompt in Linux

Hi all,
How to delete a whole line in cmd prompt in Linux using short key?
ex: [oracle@host1 ~]$ cd /u01/app/oracle/product/11.2.0/dbhome_1/
Thanks

yes ctrl+ak or ctrl+eu both are better. if you look from that perspective, go end and delete will be the same job too. (ctrl+eu) (but for me in such a command line, for example cding in to the directories ,the cursor will be at the end of the line %99 of the time :) )
about ctrl-t,
Drag the character before the cursor forward over the character at the cursor, moving the cursor forward as well. If the insertion point is at the end of the line, then this transposes the last two characters of the line.
for ex:
misspelled command date -> daet -> ctrl+t -> date
or
misspelled command $APPPL_TO -> place the cursor on third P press ctrl+t repeateadly till the P will come to the end -> APPL_TOP

How to delete a DAC block inside a sub-block by using script?

Similar Messages

Maybe you are looking for