Prevent import of transport request for certain client

Hello.
I have two clients in TST system.
I would like to delete one client.
How can I prevent import of transport request for certain client?
At hte same time users must transport request into other client in TST system.
Is it possible?
I know next features:
1.
se37-->
SCCR_LOCK_CLIENT
SCCR_UNLOCK_CLIENT
2.
tp locksys SID (from OS level)
but they use for all client (for whole system).
Best regards,
Denis

se37-->
SCCR_LOCK_CLIENT
SCCR_UNLOCK_CLIENT
These are Client Specific not Cross client. So if you want to delete a client just Schedule the Delete Job and lock the client and no body would be able to transport on that client. I hope i understand your question properly.
Regards,
Subhash

Similar Messages

How to Delete Transport request for Delete client

Hi guys,
We are going for upgrade from 46C to ECC.
we found client XXX does not exists but Transport request for the client XXX does exists. so we plan to delete it or release it before going to upgrade.
But SAP does not allow me to delete or release it. Is there any special way to deal this issue.
Please suggest me.
Thanks
Jaichan

You could have the lost client XXX recreated again by system administrator using a "minimal" client copy (just users), should take only minutes and not much disk space.
Then you can release or delete the transports, afterwards delete the client again.
I don't know another way of doing it.
Thomas
P.S. all the other replies so far do not take into account that you cannot change transports that were created in a different client.
P.P.S did you ever look at the long text for message TK056? This clearly explains your options here
To transfer the request to the current client, proceed as follows:
1. Go to the request overview.
2. Position the cursor on the request and choose Request/task -> Display/change.
You are asked if you want to copy the request and all tasks belonging to it to the current client.
3. Answer "Yes".
The request is copied to the current client, and can then be edited as normal.
Note
For this procedure, you require the "Change source client" authorization contained in the SAP standard authorization S_CTS_TR_ALL.
You can copy only your own requests to another client.
In order to copy other users' requests, you first have to assign them to you.
You can reassign the request to you in another client only if the original client no longer exists (prerequisite: You want all client-specific entries to be deleted).
I was not aware of this up to right now...

Issues with creating transport request for cross client changes???

Hi,
In our ECC 6.0 dev system, functional team makes all their configurations in client 100.But ABAP team is using another client 120 to create /modify ABAP objects.
So all workbench requests getting created in client 120.
I would like to have all customizing/work bench requests created and released from client 100.Is is possible to re-assign all work bench requests created in cleint 120 to client 100?
Thanks
Ram
Message was edited by:
        rama subramaniam

Hi Rama,
             If u r making any workbench changes that means they are repository
             objects it will reflect entire system. I dont think we need to import them
              into the same system once again. Hw ever we can do that by scc1.
Regards,
Vamshi.

How to assign transport request for Dynamic selection in SE36

Hi Friends,
Please guide me how to transport or assign a request for the changes made in BRF selecion view.
I have assigned and added BKPF-XREF1_HD field for FB03 transaction. Its working fine as per user requirement.
I am facing probelm to assing a transport request for that. I didn't find any transport menu in se36.
So please provide me how to assign a TR which need to import into Production client.
If I have to assign or create a program (standard), then please provide me the program name.
Please reply.
Thanks & Regards
Sankar.
Edited by: sankar babu on Jul 29, 2010 12:27 PM

Moderator message - Cross post locked
Total Questions: 283 (131 unresolved)
Please also close your old posts and assign po1nts to helpful answers.
Rob
Edited by: Rob Burbank on Jul 29, 2010 9:50 AM

Create a new transport request for note 898614

Hello,
I want to set up the service desk function in the solution manager 4.0.
In the IMG I'm pointed to note 898614. Here the settings are described but not clear anough for me.
Here are the first two steps:
1) In transaction SCPR20, activate the following BC set:
SOLMAN40_SDESK_BASICFUNC_000. Activate this in expert mode with the option "Overwrite everythng".
2) Create a new transport request (transaction SE09) in the source client (000) of your Solution Manager system. Unpack the file Piecelist_Service_Desk_Init.zip from the attachment to this note. Copy the contents of the file Piecelist_Service_Desk_Initial.txt to the transport request. Use transaction SCC1 to import the transport
request to your Solution Manager client.
Unpack the BC sets contained in the file SOLMAN40_SDESK_SP04.ZIP.
In transaction SCPR20, activate the BC sets. The BC sets contain additional actions.
Activation must take place in expert mode using the option "Overwrite everythng".
Then, implement Note 931196 if necessary.
My question is how do I create a new transport request and how do I import the file Piecelist_Service_Desk_Initial.txt in to this request.?
If I press the button create in tr-se09 I could choose between 6 differend transports. Which wan do I have to choose?
And how to import the Piecelist_Service_Desk_Initial.txt file.
Kind regards,
Richard Meijn

Hi,
go to SE09 in Client 000 and create a transport request of type workbench. You may use copy&paste from piecelist text file to add objects to your transport request.
Logon to your production client where you want to use Service Desk functionality and import that transport using transaction SCC1.
/cheers

Error while importing a transport request

Hi,
I installed two SAP ECC6 EHP6 IDES sytems and created a transport route between them.
When I try to import a Transport request I get the following error:
HALT: inconsistent preview tables E071K_STR (size=344) and E071KS_PREVIEW (size=128)
Please help me find a solution to this problem.

Hello Occoro,
There are multiple steps you need to do, I am not sure if the following note is applicable to your version of SAP.
1730009 - Import queue does not work
Downloading R3trans and tp is similar to downloading kernel.
Download the versions relevant to your SAP Kernel 7.20, the latest patch should be available at http://service.sap.com/swdc
In the same area where you get SAP Kernels, you should be able to get files such as:
R3trans_xxx-xxxxxx.SAR
tp_xxx-xxxx.SAR
Download these files, uncar them to your kernel directory typically /sapmnt/<SID>/exe
Refer to the following note for more details:
19466 - Downloading SAP kernel patches
Good luck.
Regards,
Siddhesh

Steps needed to import the transport request

Hello SAP gurus
I am trying to import a transport request consisting of a packacge into a server. I was able to create this transport request on first server and trying to import it into second server.
I read many postings on this site and played with STMS_IMPORT, STMS etc.,
But still can't see the package on the second server.
I don't know what I need to do on the second server (target) to make it accept this foreign transport request.
If some one can please point me to a link or document that gives the exact steps involved to do this, I would appreciate it a lot.
Thanks
Ram

thanks sudhi
but i couldn't find the area allocated for basis related questions.
when i goto forums, i see only the following
Business Process Expert Application Server Community User Groups
Service-Oriented Architecture (SOA) ABAP Development Integration and Certification Center (ICC)
SAP Solutions Emerging Technologies Chinese: 中文论坛 / 中文論壇
SAP Business One Scripting Languages Japanese: 日本語フォーラム
SAP NetWeaver Business Objects Korean: 한국어 포럼
Database & OS Platforms Business Objects SDK Application Development Portuguese: Português
Portal Crystal Reports, Xcelsius and Interactive Analysis Spanish: Español
Business Intelligence University Alliances Business By Design
Industries Community Discussions
Any other suggestions will be highly appreciated.
Tks
Ram

Transport Request copy between clients in the same system

I have one workbench request needs to transported across all our client in the QA system
Development system has 3 clients - D001,D002,D003(client)
I am supposed to do the development works in the D001 client.
Unfortunatel I did in the D002 client.
But our transport route is D001 --->Q001only.
Is their any way I can copy the Transport request from D002 to D001 and then release D001-Q001.
I am able to repeat the same work relevant to D002 client.But there is no transport request is creating for the new
work in D001.
Please advise on this.
Advance Thanks

Hi,
You cannot copy a transport request from one client to another. Try to make a client copy so that the changes you made to D002 client will get effected in D001.
Hope this helps.
Assign points if useful.
Venkat

HOW TO IMPORT A TRANSPORT REQUEST AT OS LEVEL IN HP-UNIX PLATFORM?

HOW TO IMPORT A TRANSPORT REQUEST AT OS LEVEL IN HP-UNIX PLATFORM?

Dear Pavan,
When you exporting the transport request via TCODE Se01/SE09/SE10 two files are created at the OS level in Data and Cofiles folder residing in E:\usr\sap\trans.If you open these files you will see your exported request number You need to copy your reqest from the development server OS and then go to the Quality /Production OS and open the same folder E:\usr\sap\trans and paste it into the respective Datafiles and Cofiles folder.
If will surely work.
PS: I recommend not to do this way.Use tcode STMS for importing
Note: Users must be kept away from the application and database server.Hence they work on presentation server which is our GUI workstation.
Reward if hepful and your query is resolved.
Regards,
Ashutosh

Import of transport request

Hi All,
When i imported my transport request from development to maintenance system. It ended with errors.
It is showing error code 8 in the log.
The objects under the TR are not imported.
What could be the reason for the this.
Points will be rewarded
Thanks.
Ramya

some objects might be in Inactive stage.
Else, some Dependent objects might be missing.
Eg: You have transported table but missed the Data elements in that table.
Hope this helps.
Regards
Vinayak

Custom program to release/importa a transport request

Hi all.
I was searching the forum but I didn't found any post. Well, this is my issue: I want to create a program that can do all the transport steps: release a transport request and import this transport request in another system.
When I say "another system" I'm talking about SAP systems in the same transport route: Development --> Test --> Prod.
I didn't found any Function Module or BAPI to do this process. Any idea? I think there will be a FM/BAPI to release a transport request and another to do the import in target system.
Thanks in advance. Regards,
Roberto Campo

Hello,
To do the release : TMS_TP_EXPORT
To do the import : TMS_TP_IMPORT
For the rest check function modules in function group TMST in tcode SE80.
I don't understand why you want such a program.
Importing transports can be automated via STMS (example automatic import every 10 minutes), then you don't need to write your own program, because after release of your transport, transport comes in the QA import queue and will be imported via the automatic job.
Success.
Wim

Transport request for Set Control Parameters for Actual Data.

Hi Viewers,
I am unable to create the transport request for the below settings
Controlling->Profit Center Accounting->Basic Settings->Controlling Area Settings->Activate Direct Postings->Set Control Parameters for Actual Data.
Is it possible to move the request through transport request or do we need to create the settings directly in the target system.
Thanks
Aswin.

Hi,
Please read the IMG help at the given path. There are certain profit center accounting settings which cannot be transported directly from the same path, but there is another node in SPRO path for doing this. If possible I will try to locate the path but I am not sure I can post it immediately as I am not having system handy.
thanks,
Kumar

How could I see who imported a transport request

How could I see who imported a transport request (not who is the owner)
In import monitor I can see it but only for current day(or I can extend that period)

goto SE01 ..
enter the transport request ...display
In
Object List of Request
Comment Entry: Released
EC6XXXXXX 20080325 190541 USER <-- person responsible
You'll have the person who released(USER)

How to create Transport request for OKC9

Hi Experts,
I changed the Prerequisite for one of the substitution in Development client.
No I need to move the same to Production client, but after make changes in prerequisite am not generating the Transport request. Please help me out how to create the Transport Request for the same.
Regards
Vijay

Check whether t he Request is being generated or not
if yes
go to SE10
display the tranport request
Release the Cusotmising Task first
later relase the Request
and later Check whetehr the Request is passed in Qiality form Development thru t code STMS
Check with ur basis consultant once

How to create Transport request for OKC9 changes

Hi Experts,
I changed the Prerequisite for one of the substitution in Development client.
No I need to move the same to Production client, but after make changes in prerequisite am not generating the Transport request. Please help me out how to create the Transport Request for the same.
Regards
Vijay

HI,
In the same screen, go to Menu bar>Table view. Transport.
This will help you to create Transport request and u can move the same to Production.
Vijay

Prevent import of transport request for certain client

Similar Messages

Maybe you are looking for