How to deliver modules based on Job Position?
I have a couple of courses in my organization that are currently required to be completed by everyone. However, the range of material goes from a basic overview of system and processes to detailed information about each and what level of information is really needed is based on your level within the organization. I would like to be able to have the learner identify their position and then deliver only the modules that are applicable to them. Does anyone know a relatively easy way to do this? Something like the "pre-test" in multi-SCORM packaging?
Thanks.
You could do this several different ways.
The best way is to control which modules the learner receives by having the LMS control which content they can access based on which user group they are assigned to. This way the learner has no control over the content and cannot see something they should not just by selecting a role other than their own.
If you are trying to control which slides a learner sees within a singe Captivate project file then you need to be using custom user variables and conditional actions triggered by the ON Slide Enter event of slides that will either be viewed or skipped according to the learner's chosen role.
When it comes to the quiz, these same user variables can be used to control which quiz questions the learner sees and then have Branch Aware switched on so that their score is based only on the questions they visit. But you have to achieve the branching without having the learner reach a given question slide otherwise it will be counted as part of their quiz because they went to that slide.
Similar Messages
-
Complex alternative qualifications/requirements for job/position level
Dear collegues,
I've faced a problem when assigning job qualifications.
The Client (State Authority) has experience requirements for jobs/positions something like this:
Ex. for Committee Director position requirements are:
5 years of general experience, including 1 year in state authorities OR
4 years of general experience, including 1 year in state authorities after finishing government study programme - Western Bachelors degree OR
3 years of general experience, including 1 year in state authorities after finishing government study programme - Western Masters degree OR
3 years of experience in State Authorities OR
6 years of general experience, including 2 years on Executive positions OR
3 years of general experience if having Doctors degree
So, we have 6 alternative bundles of requirements for the position, which contain several requirements in itself.
Is there a possibility to make qualification blocks alternative?
Or any other suggestions please?
It broke my brain today))
thank you,
best regards,
YevgeniyThanks for the confirmation Yevgeniy.
First thing that organization has to plan is: alternative qualification mapping for scales which can be easily read and considered for all process front like Recruitment, Hiring, building Competency Mapping, Performance Management, and Learning Management. This requires a complete change management process as to how to manage Job Family Architecture would fit the organization and it's organizational structure based on Position and Qualification.
For all the alternate qualifications they have; you need to simply build a scale as Option 1, Option 2, Option 3, etc and each position qualification description will be held in position description rather in Personnel Development.
Therefore, QK would be called as Experience and Q would be Relevant Experience with Scales attached as Option 1, Option 2, Option 3, Option N... etc. I still don't know what Option 1, Option 2... Option N... could be described as and you can write small description for each options as well (SuccessFactors have scales which can hold large texts as well, but in SAP the text width in scale level is limited).
If you patch up with client on this approach, they can help you out. We have succeeded this approach to one of my engagement as Qualification via Job / Position Architecture.
The advantage of this approach is: Only the scale is configurable, the rest is masters which can be changed or overlooked anytime. With reference to your context, all the data structures should be managed as masters rather custom or configurable as it would lead to inconsistency on a longer run.
Hope this helps. Do let me know if you still need any clarifications. Thanks in advance.
Regards,
Saravana Gopalan
Senior Business Consultant - Human Capital Management
SAP Service Line | Cloud Computing (SuccessFactors / Etc)
E/ [email protected] -
What is the best way, while creating Function Module based extractor
Hi Friends,
I am Sreekanth.
I have created a Functio Module based Extractor,
To fetch data from COPA tables.
In this extracton 3 tables are getting involved.
1) CE3OP01 2) CE4OP01 and 3) CE1OP01.
Logic required is as follow:
1) get data from CE3OP01 and for all entries of this data set,
get data from CE4OP01 and CE1OP01 and finally send the data set to BW after few manupulations.
I have implemented the whole logic and its working fine in DEVELOPMENT box where data volume is less.
But the same code is timing out in Quality Box, due to huge volues of data.
Below I am copying the code that i am using . Any body can suggest me how to proceed further so that my code works with huge volumes of data.
Now I am getting the time out error while selection data from CE3IOP01 table itself.
FUNCTION /ds1/c_bw_zds_copa_recon.
""Local interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE /DS1/FI_COPA_RECN OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
PROGRAM INFORMATION *
RIEF ID.......: N/A *
PROGRAM.......: /DS1/C_BW_ZDS_COPA_RECON
PROGRAM FUNCTION: This Function Module Extracts Cost Center, Company *
Code, and all Amount fields form CE3OP01 table and sectaktbo "
* Current profitability segment (CO-PA) *
paobjnr " Profitability Segment Number (CO-PA) *
pasubnr " Profitability segment changes (CO-PA) *
bukrs " Company Code
kndnr " Customer from CE4Op01 table. *
Segrigate one record from CE3Op01 into 93 based on Value fields. *
PROGRAM TYPE..Function Module *
DEV. CLASS..../DS1/MI_01 *
LOGICAL DB.... N/A *
Conventions used in the Program *
* global variables --> g_* *
* local variables --> l_* *
* constants --> c_* *
* internal tables --> t_* *
* structures --> x_* *
* parameters --> p_* *
* select-options --> s_* *
* ranges --> r_* *
* workarea --> w_* *
* field symbol --> fs_* *
Declaration for Interface: Selection criteria
STATICS: s_s_if TYPE srsc_s_if_simple,
Maximum number of lines for DB table
ls_s_if TYPE srsc_s_if_simple, "Static Structure
counter
ls_counter_datapakid LIKE sy-tabix,"Static Counter
cursor
ls_cursor TYPE cursor,"Static Cursor.
ls_cursor1 TYPE cursor."Static Cursor.
*CONSTANTS
CONSTANTS: lc_datasource TYPE char14 VALUE 'ZDS_COPA_RECON',
" Data Source Name
lc_msgtype TYPE char1 VALUE 'E', "message type
lc_msgcls TYPE char2 VALUE 'R3', "message class
lc_msgnum TYPE char3 VALUE '009',"Message Number.
lc_001 TYPE char3 VALUE '001',
lc_b0 TYPE char2 VALUE 'B0',
lc_10 TYPE char2 VALUE '10',
lc_01 TYPE char2 VALUE '01',
lc_02 TYPE char2 VALUE '02',
lc_1 TYPE sy-tabix VALUE 1.
*Data Declaration.
DATA: lt_ce3op01 TYPE STANDARD TABLE OF x_ce3op01,
" Internal table for ce3op01
lt_ce3op02 TYPE STANDARD TABLE OF x_ce3op01,
lt_ce4op01 TYPE STANDARD TABLE OF x_ce4op01,
" Internal table for ce4op01
lw_ce3op01 TYPE x_ce3op01,
" Work area for ce3op01
lw_ce3op02 TYPE x_ce3op01, "MOD-002
lw_ce4op01 TYPE x_ce4op01,
" Work area for ce4op01
lw_e_t_data TYPE /ds1/fi_copa_recn,
" Work area for /ds1/fi_copa_recn.
*CE1op01
lt_ce1op01 TYPE STANDARD TABLE OF x_ce1op01,"Internaltable
lw_ce1op01 TYPE x_ce1op01,"Work area for CE1op01.
**CE1op01
lt_fldlist TYPE STANDARD TABLE OF lx_fldlist, "fields list
lw_fldlist TYPE lx_fldlist," FIELDS list work area
lt_flnmval TYPE STANDARD TABLE OF lx_flnmval,"table for splitting
lw_flnmval TYPE lx_flnmval,"work area for spilitting
l_index TYPE i VALUE 1, "to keep track of index.
l_len TYPE i,
l_s_no_recs TYPE sy-tabix VALUE 99,
l_s_loop_from TYPE sy-tabix, "from "MOD-002
l_s_loop_to TYPE sy-tabix, "to"MOD-002
l_norecs TYPE sy-tabix, "MOD-002
l_count TYPE sy-tabix. "MOD-002
*Field Symbols.
FIELD-SYMBOLS:
<fs_flnmval> TYPE lx_flnmval."Field symbol for fild values
Selection Ranges
RANGES: lr_bukrs FOR ce4op01-bukrs, " Range for company code
lr_versi FOR ce3op01-versi," Range for version
lr_paledger FOR ce3op01-paledger,"Range for paledger
lr_vrgar FOR ce3op01-vrgar,"Range for vrgar
lr_gjahr FOR ce3op01-gjahr,"Range for Fiscal year
lr_perbl FOR ce3op01-perbl."Range for perbl
Initialization mode (first call by SAPI) or data transfer mode
IF i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
buffer input parameters
prepare data selection
Check DataSource validity
IF ls_counter_datapakid = 0.
CASE i_dsource.
WHEN lc_datasource.
WHEN OTHERS.
IF 1 = 2. MESSAGE e009(r3). ENDIF. "#EC *
this is a typical log call. Please write every error message like this
log_write lc_msgtype "'E' "message type
lc_msgcls "'R3' "message class
lc_msgnum "'009' "message number
i_dsource "message variable 1
' '. "message variable 2
RAISE error_passed_to_mess_handler.
ENDCASE.
APPEND LINES OF i_t_select TO s_s_if-t_select.
APPEND LINES OF i_t_fields TO s_s_if-t_fields.
Fill parameter buffer for data extraction calls
ls_s_if-requnr = i_requnr.
ls_s_if-dsource = i_dsource.
ls_s_if-maxsize = i_maxsize.
ls_s_if-initflag = i_initflag.
Company Code
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_bukrs.
MOVE: i_t_select-sign TO lr_bukrs-sign,
i_t_select-option TO lr_bukrs-option,
i_t_select-low TO lr_bukrs-low,
i_t_select-high TO lr_bukrs-high.
APPEND lr_bukrs.
ENDLOOP.
*Version (0)
*SRSC_S_IF_SIMPLE-T_SELECT
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_versi.
LOOP AT i_t_select INTO s_s_if-t_select WHERE fieldnm = c_versi.
MOVE: i_t_select-sign TO lr_versi-sign,
i_t_select-option TO lr_versi-option,
i_t_select-low TO lr_versi-low,
i_t_select-high TO lr_versi-high.
APPEND lr_versi.
ENDLOOP.
*Currency Type (company code only)
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_paledger.
MOVE: i_t_select-sign TO lr_paledger-sign,
i_t_select-option TO lr_paledger-option.
IF i_t_select-low = lc_b0.
MOVE lc_01 TO lr_paledger-low.
ELSEIF i_t_select-low = lc_10.
MOVE lc_02 TO lr_paledger-low.
ENDIF.
APPEND lr_paledger.
ENDLOOP.
*Record Type
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_vrgar.
MOVE: i_t_select-sign TO lr_vrgar-sign,
i_t_select-option TO lr_vrgar-option,
i_t_select-low TO lr_vrgar-low,
i_t_select-high TO lr_vrgar-high.
APPEND lr_vrgar.
ENDLOOP.
*Fiscal Year
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_gjahr.
MOVE: i_t_select-sign TO lr_gjahr-sign,
i_t_select-option TO lr_gjahr-option,
i_t_select-low TO lr_gjahr-low,
i_t_select-high TO lr_gjahr-high.
APPEND lr_gjahr.
ENDLOOP.
*Period Block/Year
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_perbl.
MOVE: i_t_select-sign TO lr_perbl-sign,
i_t_select-option TO lr_perbl-option,
i_t_select-low TO lr_perbl-low,
i_t_select-high TO lr_perbl-high.
APPEND lr_perbl.
ENDLOOP.
*Value Field Name.
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_fldnm.
MOVE:
i_t_select-sign TO gr_zfldnm-sign,
i_t_select-option TO gr_zfldnm-option,
i_t_select-low TO gr_zfldnm-low,
i_t_select-high TO gr_zfldnm-high.
APPEND gr_zfldnm.
ENDLOOP.
First data package -> OPEN CURSOR
IF ls_counter_datapakid = 0.
*Create 93 Field names in an internal table.
MOVE 'VV010' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV011' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV012' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV013' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV014' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV015' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV016' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV020' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV021' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV030' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV031' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV032' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV033' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV034' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV035' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV200' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV201' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV202' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV203' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV036' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV037' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV038' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV039' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV040' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV041' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV042' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV043' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV204' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV205' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV211' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV212' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV213' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV222' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV223' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV230' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV232' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV233' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV500' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV501' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV502' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV503' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV504' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV505' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV506' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV507' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV508' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV509' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV510' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV511' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV512' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV513' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV514' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV515' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV516' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV517' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV518' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV519' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV520' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV236' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV206' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV051' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV052' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV053' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV054' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV055' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV056' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV057' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV058' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV059' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV060' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV241' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV242' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV243' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV244' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV245' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV246' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV247' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV248' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV249' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV250' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV521' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV522' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV523' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV524' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV525' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV526' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV527' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV528' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV529' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV530' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV227' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV226' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV224' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
OPEN CURSOR WITH HOLD ls_cursor FOR
SELECT
paobjnr " Profitability Segment Number (CO-PA)
paledger " Currency type for an operating concern
vrgar " Record Type
versi " Plan version (CO-PA)
gjahr " Fiscal Year
perbl " Fiscal year/period block
pasubnr
vv010001 " List Price
vv011001 " Formula Price
vv012001 " Customer Price
vv013001 " Manual Price
vv014001 " Retail Pump Price
vv015001 " Markup
vv016001 " Net Proceeds Other
vv020001 " Excise Duty Offset
vv021001 " Duties & Government
vv030001 " Sales Discounts
vv031001 " Sales Surcharges
vv032001 " Sales Rebates
vv033001 " Agents Comm Paid
vv034001 " RBA CR Royalties
vv035001 " Other Revenues
vv200001 " Transfer PriceSupply
vv201001 " Prim Tran Tariff Sup
vv202001 " S&Handling TariffDis
vv203001 " Sec Trans Tariff Dis
vv036001 " Proceeds from Servic
vv037001 " Exchanges
vv038001 " Throughput fees
vv039001 " Output Tax Offset
vv040001 " CR comm & Oth Oil Pr
vv041001 " Supplier fees
vv042001 " RBA Fairshare Adjust
vv043001 " Contr Comm Paid IG
vv204001 " Sec Tran Tariff Supp
vv205001 " Comp Stock Obligatio
vv211001 " Prim Tran Tar Transf
vv212001 " S&Handling Tar Trans
vv213001 " Sec Trans TariffTran
vv222001 " DIS:S&Handl Tar OvUn
vv223001 " DIS:Sec Tr TarifOvUn
vv230001 " Transfer Price LSC
vv232001 " S&Handling Tar LSC
vv233001 " Sec Trans Tariff LSC
vv500001 " 3rd Party Purchases
vv501001 " Transf from Oth Sect
vv502001 " Purchases IG
vv503001 " Inter-Seg Transf Pur
vv504001 " Import Freight
vv505001 " Stock Variations
vv506001 " Other Product Cost
vv507001 " Pipeline Operat Exp
vv508001 " Primary Transp Expen
vv509001 " Manufacturing Expens
vv510001 " Supply /Process Exp
vv511001 " MK Processing Plants
vv512001 " S&Handling Expenses
vv513001 " Sec Transp Expenses
vv514001 " Point of Sale Expens
vv515001 " Contr Comm Rec IG
vv516001 " Assoc Inc Dividend
vv517001 " Marketing & Sell Exp
vv518001 " Other Rev from Dist
vv519001 " Other Rev Transferrd
vv520001 " Stock Write-Off
vv236001 " Oth cost Tar LSC SMP
vv206001 " Prim Trp tariff Dist
vv051001 " CR Net Turnover
vv052001 " Dummy Price 2
vv053001 " Dummy Price 3
vv054001 " Dummy Price 4
vv055001 " Dummy Price 5
vv056001 " Dummy Price 6
vv057001 " Dummy Price 7
vv058001 " Dummy Price 8
vv059001 " Dummy Price 9
vv060001 " Dummy Price10
vv241001 " DummyTariff 1
vv242001 " DummyTariff 2
vv243001 " DummyTariff 3
vv244001 " DummyTariff 4
vv245001 " DummyTariff 5
vv246001 " DummyTariff 6
vv247001 " DummyTariff 7
vv248001 " DummyTariff 8
vv249001 " DummyTariff 9
vv250001 " DummyTariff10
vv521001 " SD&A Rebates
vv522001 " Dummy Cost 2
vv523001 " Dummy Cost 3
vv524001 " Dummy Cost 4
vv525001 " Dummy Cost 5
vv526001 " Dummy Cost 6
vv527001 " Dummy Cost 7
vv528001 " Dummy Cost 8
vv529001 " Dummy Cost 9
vv530001 " Dummy Cost 10
vv227001 " Sec Tr TarifOvUn LSC
vv226001 " S&Handl Tar OvUn LSC
vv224001 " Pr Tra TariffOvU DIS
FROM ce3op01
WHERE paledger = lc_02 AND
vrgar IN lr_vrgar AND
versi IN lr_versi AND
perbl IN lr_perbl AND
gjahr IN lr_gjahr.
ENDIF.
For all other cursors.
FETCH NEXT CURSOR ls_cursor
APPENDING TABLE lt_ce3op02
PACKAGE SIZE ls_s_if-maxsize.
IF sy-subrc <> 0.
EXIT.
ENDIF.
SORT lt_ce3op02 BY paobjnr pasubnr paledger vrgar versi gjahr
perbl.
DELETE ADJACENT DUPLICATES FROM lt_ce3op02 COMPARING paobjnr.
*Begin of MODE-002
DESCRIBE TABLE lt_ce3op02 LINES l_norecs.
l_s_loop_from = lc_1.
DO.
l_s_loop_to = l_s_loop_from + l_s_no_recs.
LOOP AT lt_ce3op02 INTO lw_ce3op02
FROM l_s_loop_from TO l_s_loop_to .
APPEND lw_ce3op02 TO lt_ce3op01.
ENDLOOP.
SORT lt_ce3op01 BY paobjnr.
*End of MOS-002
SELECT
aktbo " Current profitability segment (CO-PA)
paobjnr " Profitability Segment Number (CO-PA)
pasubnr " Profitability segment changes (CO-PA)
kndnr " Customer
artnr
bukrs " Company Code
prctr
kokrs
FROM ce4op01
INTO TABLE lt_ce4op01
FOR ALL ENTRIES IN lt_ce3op01
WHERE paobjnr = lt_ce3op01-paobjnr AND
pasubnr = lt_ce3op01-pasubnr AND
bukrs IN lr_bukrs.
*CE1op01
SELECT
paledger
vrgar
versi
perio
paobjnr
pasubnr
belnr
posnr
rbeln
rposn
FROM ce1op01
INTO TABLE lt_ce1op01
FOR ALL ENTRIES IN lt_ce3op01
WHERE paledger = lt_ce3op01-paledger AND
vrgar = lt_ce3op01-vrgar AND
versi = lt_ce3op01-versi AND
perio = lt_ce3op01-perbl AND
paobjnr = lt_ce3op01-paobjnr AND
pasubnr = lt_ce3op01-pasubnr.
**CE1op01
LOOP AT lt_ce3op01 INTO lw_ce3op01.
MOVE:
lw_ce3op01-paobjnr TO lw_flnmval-paobjnr,
lw_ce3op01-paledger TO lw_flnmval-paledger,
lw_ce3op01-vrgar TO lw_flnmval-vrgar,
lw_ce3op01-versi TO lw_flnmval-versi,
lw_ce3op01-gjahr TO lw_flnmval-gjahr,
lw_ce3op01-perbl TO lw_flnmval-perbl.
*appending all 93 fields as records
MOVE lw_ce3op01-vv010001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv011001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv012001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv013001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv014001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv015001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv016001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv020001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv021001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv030001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv031001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv032001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv033001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv034001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv035001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv200001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv201001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv202001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv203001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv036001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv037001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv038001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv039001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv040001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv041001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv042001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv043001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv204001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv205001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv211001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv212001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv213001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv222001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv223001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv230001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv232001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv233001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv500001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv501001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv502001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv503001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv504001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv505001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv506001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv507001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv508001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv509001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv510001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv511001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv512001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv513001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv514001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv515001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv516001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv517001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv518001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv519001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv520001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv236001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv206001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv051001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv052001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv053001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv054001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv055001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv056001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv057001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv058001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv059001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv060001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv241001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv242001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv243001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv244001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv245001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv246001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv247001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv248001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv249001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv250001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv521001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv522001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv523001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv524001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv525001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv526001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv527001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv528001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv529001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv530001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv227001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv226001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv224001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
*Segrigating all one record into 102 records is complete
ENDLOOP.
LOOP AT lt_flnmval ASSIGNING <fs_flnmval>.
IF l_index > 93.
l_index = 1.
ENDIF.
READ TABLE lt_fldlist INTO lw_fldlist INDEX l_index.
IF sy-subrc = 0.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = lw_fldlist-fldnam
IMPORTING
output = <fs_flnmval>-fldnam.
ENDIF.
l_index = l_index + 1.
ENDLOOP.
SORT lt_ce4op01 BY paobjnr.
SORT lt_ce1op01 BY paobjnr paledger vrgar versi.
SORT gr_zfldnm BY low.
DELETE lt_flnmval WHERE fldnam NOT IN gr_zfldnm.
LOOP AT lt_flnmval INTO lw_flnmval.
READ TABLE lt_ce4op01 INTO lw_ce4op01 WITH KEY
paobjnr = lw_flnmval-paobjnr BINARY SEARCH.
IF sy-subrc = 0.
MOVE : lw_flnmval-paledger TO lw_e_t_data-paledger,
lw_flnmval-vrgar TO lw_e_t_data-vrgar,
lw_flnmval-versi TO lw_e_t_data-versi ,
lw_flnmval-gjahr TO lw_e_t_data-gjahr,
lw_flnmval-perbl TO lw_e_t_data-perbl,
lw_ce4op01-bukrs TO lw_e_t_data-bukrs,
lw_ce4op01-kndnr TO lw_e_t_data-kndnr,
lw_ce4op01-artnr TO lw_e_t_data-artnr,
lw_ce4op01-prctr TO lw_e_t_data-prctr,
lw_ce4op01-kokrs TO lw_e_t_data-kokrs,
lw_flnmval-fldnam TO lw_e_t_data-zfldnm,
lw_flnmval-zamunt TO lw_e_t_data-zamount.
CE1op01
READ TABLE lt_ce1op01 INTO lw_ce1op01 WITH KEY
paobjnr = lw_flnmval-paobjnr
paledger = lw_flnmval-paledger
vrgar = lw_flnmval-vrgar
versi = lw_flnmval-versi BINARY SEARCH.
IF sy-subrc = 0.
MOVE: lw_ce1op01-rbeln TO lw_e_t_data-rbeln,
lw_ce1op01-rposn TO lw_e_t_data-rposn.
ENDIF.
CE1op01
APPEND lw_e_t_data TO gt_out_data.
ENDIF.
ENDLOOP.
*Begin of MOD-002
FREE lt_flnmval.
REFRESH :lt_ce3op01,lt_ce4op01,lt_ce1op01.
e_t_data[] = gt_out_data[].
DELETE e_t_data WHERE zfldnm NOT IN gr_zfldnm.
l_s_loop_from = l_s_loop_to + lc_1.
l_count = l_count + 20.
IF l_count GE l_norecs.
EXIT.
ENDIF.
ENDDO.
*End of MOD-002
ls_counter_datapakid = ls_counter_datapakid + 1.
ENDIF. "IF S_COUNTER_DATAPAKID = 0
ELSE.
IF i_maxsize IS INITIAL.
RAISE error_passed_to_mess_handler.
ENDIF.
IF g_start IS INITIAL.
g_start = 1.
ELSE.
g_start = g_end + 1.
ENDIF.
g_end = g_start + i_maxsize - 1.
Population of E_T_DATA based on Data records size
APPEND LINES OF gt_out_data FROM g_start TO g_end TO e_t_data.
DELETE e_t_data WHERE zfldnm NOT IN gr_zfldnm.
IF e_t_data[] IS INITIAL.
RAISE no_more_data.
ENDIF.
ls_counter_datapakid = ls_counter_datapakid + 1.
ENDIF.
ENDFUNCTION.
Thanks & regards,
Sreekanth
+91 9740091981Hello Sreekanth,
See this blog [Generic Extraction via Function Module|/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module]
Also see this
[Line Item Level Data Extraction for Financial Accounting and Controlling|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a]
Thanks
Chandran -
How to trigger an existing background job in ABAP program?which fm?
Hi experts,
how to trigger an existing background job( defined in SM36 ) in ABAP program?which fm?
seems that FM 'JOB_OPEN' / 'JOB_SUBMIT' / 'JOB_CLOSE' can only create a new job.Hi,
now my requirement is that sap has generated one job automatically, and then i will have a job name
'XXX'. and then i want to schedule the job in abap program,. which function module could i use ?
my expected fm is that the system will trigger the job after i give the job name and start condition.
i have tried job_open, but it seems just to create a new job. any advice ? -
How to deliver news to public application ?
hi,all
In order to post news,i have created two applications,one for admin and the other is for public users(public application).Now i have created a news report,and it contains lots of news,each row contains news_id and news_content.sure it is to add or modify the value,but the question is : how to deliver the first (or second,or third...)news to somewhere of the public application?
I dont know how to make it generate a link(session),so I can't see the news to be displayed in the public application.how to achieve this ??
best regards
hleeI'm fairly certain that I don't understand your question but here's what I think you should do:
Create a report form on some table in your admin application. This way you can edit/update/delete this table only when you log in.
Afterwards in you public application just create a report without form or without edit capabilities on the same table you used in you admin module.
Correct me if I missed something you like to do?
Br,
Nico -
How Many Application Module should I have ?
Hi All,
Could you please share your experience...
I am developing a ADF Faces + BC application, how can I determine how many application module should I have ?
I have modules , i.e :
Sales
AR
Inventory
Purchasing
GL
Can I say that I should have 5 application modules ? ( one for each module ? )
Thank you for your info,
xtantoIts difficult to know if 80 is too much or jus right...The danger is that if you have many application modules, and for example a particular UI page requires you to manipluate data in many application modules then this has potential to be "overkill"...each AM requires a check out from the AM pool and database connection etc. etc. etc.
If you need to manipulate many app modules on a single UI page if you were to nest these application modules then this might be more reaslistic...However, if a couple of UI pages requires manipulation of only one app module this sounds reasonable...
I dont know if that really helps you
So if on pages A, B and C you maintain Sales Order (which is one app module) then thats ok.
If in pages X, Y and Z you manipulate Quotation (which is one app module) that would be ok as well.
If the use case is that in page F, G and H you maintain Sales and on page J you maintain Quotation then you might want to nest one inside the other.
If your use case is on screen K, L M, N, O, P and Q you access 4-5 different app modules then that would raise a concern with me...
Again, don't know if that helps,,,
One way of lookin at this is to create your VOs based on the way you want in the information to appear on your pages and from those pages think about the "uses case" and create your app modules based on those use cases...
Does that help?
regards
Grant -
Security based on the position and responsibility of Siebel tables.
Hi Forum,
We have a requirement to show some reports based on OLTP (Siebel Base tables with S_) tables. so we have created a repository and created few reports in OBIEE.
Now we want to implement security based on these tables. Like siebel users will be accessing these reports, So how do we implement security based on the position and responsibility of Siebel tables.
I request to share any links or docs pertaining to above mentioned implementation.
ThanksCould be interference
AirPort and Bluetooth: Potential sources of wireless interference
Try:
- Reseting the BT headset
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset network settings: Settings>General>Reset>Reset Network Settings. You will have to rejoin all wifi networs and re-pair all BT devices -
How to find article based support for ipad or technical notes
how to find article based support for ipad or technical notes
The problem comes from VBUK/VBUP which are the control tables for most of SD tables (from VBAK/P to LIKP/PS and VBRK/P) and manage uniqueness of id in the module (and stores statuses). Even item tables don't refer to their header but both refer to the same VBUK record.
e.g.
LIPS : VBELN/POSNR -> VBUK/VBUP -> but you will only find LIKP/PS itself and no record in VBAK/VBAP
LIPS : VBELV/POSNV -> VBUK/VBUP -> you should find VBAK/VBAP
The table VBFA "Sales Document Flow" manages the relations from/to between two different SD documents which exist in VBUL/P and in only one other table depending on type of document. (Also note that the exact relationship may sometimes be modified to some extent by Customizing SD.)
As Katan wrote, look for views defined in ddic, look also at logical databases (SE36) like VLV.
You can also find valuable information in OSS notes/documents like 185530 - Performance: Customer developments in SD.
Regards,
Raymond -
How Many Memory Modules (1 or 2) Come Pre-Installed in HP Envy Touchsmart m7-j120dx?
I know my HP Envy Touchsmart m7-j120dx came preinstalled with 8GB of RAM. I purchased it last year from Best Buy. Haven't taken the back off of the laptop just yet and it's at home while I'm at work, but wanted to see if anyone can verify *how* the standard 8GB of RAM is in there at present? Two 4GB memory modules or a single 8GB memory module?
I'm trying to place an order online this afternoon to upgrade the laptop to 16GB of RAM and I'd like to know if I need to order two 8GB memory modules or just a single 8GB memory module, depending on exactly how many memory modules are in the laptop at present to make the existing 8GB of RAM I'm running.
Thanks if anyone knows the answer to this.Okay, one more question...
The memory in my laptop came pre-stalled with 8GB of it, with the characteristics of 1600Mhz and DDR3L PC3-12800.
Replacement memory (16GB) recommended by Crucial.com for my system has 1866Mhz instead of 1600Mhz, and is DDR3L PC3-14900.
What was recommended has of course slightly higher specs of the memory than what's currently running in my system for an additional $23 over just replacing the memory with 16GB of RAM having the identical 1600Mhz and DDR3L PC3-12800 specs.
Can my HP Envy TouchSmart m7-j120dx actually do anything as far as increased performance in going with the 1866Mhz and DDR3L PC3-14900 memory or would my laptop continue to "dumb the memory down" to 1600Mhz and DDR3L PC3-12800 specs and not be able to utilize the enhanced specs of 1866Mhz and DDR3L PC3-14900?
Just trying to spend my money wisely. Thanks for any additional clarification. -
How do you split the print job across multiple printers to shorten the prin
i
Can any one you provide some information on below questions.
Check printing by XML template (XML Publisher).
1. When printing checks, how do you print the checks from one printer tray and the overflow remittance pages from another printer tray?
2. When printing a large batch of checks using XML and PDF output, how do you split the print job across multiple printers to shorten the print time?
I appreciate if you could give some information on above 2 questions.
Regards,
Ramarao.Probably sould just do them individually.
How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
About Free Apple Apps for iOS 7 compatible devices
http://support.apple.com/kb/HT5913
Cheers, Tom -
Function module for background jobs email
hi abaper's
i hace to create a function module for background jobs this function module have to send an email automatically when a background job is assigned or processed in background.
thnks n regards
pardeep kumarhi dear
open this site
https://weblogs.sdn.sap.com/pub/wlg/781. [original link is broken] [original link is broken] [original link is broken]
<removed by moderator>
Edited by: Mike Pokraka on Aug 8, 2008 12:48 PM -
How to block calls based ANI for individual user?
I want to know how to block calls based on ANI for individual user in CUCM? Lets say if the individual wants to block calls from certain number.
Malicious call id - softkey will not work for our purpose.
calls come to cucm via mgcp gateway. cucm 9.x
thanks,How to block calls has been asked hundreds, and hundreds of times at CSC, a simple search would have provided you with all the necesarry information. Please search before you ask
https://supportforums.cisco.com/docs/DOC-19628
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk -
How can I return to the same position in the calling order details form
I am Calling a form for creating a new item from order details form, so after creating The new item I want to returned the item code to the calling form to same position in The order details form , how can I return to the same position in the order details form
Waiting for your valuable answer .
Best regards
Jamil AlshaibaniDear Friends
My actual problem description as the following
I have a form for production order screen , and this form contain header and details blocks , so the user in the details will select Type Code , and he will go the next field that is Item Code Field search for specific Item Code if it is not exist he has to call the Item Definition Form by using this script
CALL_FORM(ITEM_DEFINITION);
Then when he finished defining the Item , and I assign the item code as the following in the :
WHEN-BUTTON-PRESSED TRIGGER
:GLOBAL.ITEM_CODE_VAR := :ITEM_CODE;
DO_KEY('exit_form');
But I don't know where to keep this assignment
:ITEM_CODE := :GLOBAL.ITEM_CODE_VAR;
inside the caller form in which trigger do I have to use when it return from the caller form it should assign the :GLOBAL.ITEM_CODE_VAR to the :ITEM_CODE and the cursor it should show inside the ITEM_CODE , and as I mention it does not return to the same location of The ITEM_CODE when it return from the calling form
Waiting for your valuable answer .
With example please .
Best Regards
Jamil Alshaibani -
How can I get the cursor's position in a opened file and display a menu?
Hello,
I want to make a program by which I will be able to display a panel/pops up menu at the corsor's current position, (In any text/doc file or in the desktop, we can display a menu by right click of the mouse.) Now I want my program to do the same task.
More clearly-
1. First I would save some words or sentences in a file(aa.txt).
2. Then I would open another text file/ a word/ excel/ or any other editor( bb.txt / cc.doc / dd.xls / ee.html ).
3. While editing or writing something in the opened file, if I click the right mouse button/ press a key (ctrl+space), a menu will appear containing the sentences I saved in the file(aa.txt) previously.
My program will tell me the cursor's position in bb.txt / cc.doc / dd.xls / ee.html that i opened. And display a menu. my problem is not reading / writing in a file.
My problem is how can I get the cursor's position in a opened file display a menu at that position by a mouse/key action*.
Would you please help me on this regard.
ThanksDrClap wrote:
I think the OP wants to start up an application like MS Word and then operate it from a Java program.Doesn't The Monkey's Paw do that? What a second, according to Wikipedia:
[http://en.wikipedia.org/wiki/The_Monkey%27s_Paw]
<quote>
...the paw of a dead monkey is a talisman that grants its possessor three wishes, but the wishes come with an enormous price.
The moral of the story is contained in this description of the paw: "It had a spell put on it by an old fakir," said the sergeant-major, "a very holy man. He wanted to show that fate ruled people's lives, and that those who interfered with it did so to their sorrow."
</quote>
So I guess that a non-sequitor ... or is it? -
HP Photosmart 7510 All-in-One CQ877a Model C3112; Operating system Windows Vista 64-bit.
Can't find how to easily cancel a print job. The touch screen is unavailable during the printing process (just shows the HP icon spinning around during the print process). There isn't a "cancel" button or touch area to cancel. We're wasting ink and paper by not being able to cancel jobs easily. Read the 24-page manual and it doesn't mention it. Looked on line for an answer, can't seem to locate one. Can always go to Start, Printers, and select the printer and then cancel from within there, but by then, the job is finished.There should be a cancel button (X) on the printer. Check out the pic below taken from page 7 of the User manual for your printer:
http://goo.gl/mW7Fy
Alternately, instead of going the Start button route, did you check out the Final tip at the bottom of the article?
"Final Tip (Shortcut)
Before using the method above to open the print queue, look for the printer icon in the notification area. If you see it, double-click it to bring up the print queue. "
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution
Maybe you are looking for
-
Logtransport2 error in Lightroom 6 or other Adobe app
I now get a logtransport2.exe erro in Windows 7 whenever I close the computer since upgrade to LR6. There are logtransport.exe files associated with all the Adobe apps so I can't be positive it is due to LR6. How can I fix this?
-
One question about the MouseListener and Copy function.
Hola, I want my program to activate a method when the user press left mouse button, but in other window, in other program. I can make it with the Listener, but only when the window of my java program is active. I want to my program to listen for pres
-
Error FAGL_SKF008 when loading data from 0FI_GL_8 infosource
Hi, I am loading data into an infocube, from 0FI_GL_8 infosource. We have connected ECC-P with BI-D and BI-P. When loading data into BI-D works Ok, but when loading data into BI-P, the next error message appears: "No authorization for displaying stat
-
RTF Word files arrive as Winmail.dat files and cannot be opened
Hi, I currently have a Bold 9900 and some emails arrive with attachment winmial.dat. It was send originally as a Word file. I understand that if sent as html or some other format it will arrive fine - but I cannot ask the senders to swithc the form
-
My iPhone4 is beginning to lose power really fast. The last two days, I have charge my battery to almost 100% before I go to sleep. Next morning my phone drop about 20%(over 7 Hour) of is power. And at the end of the day my phone has about 10-20% pow