How to detect as to which slot the SCXI module is present

i want to detect to which slot the scxi module is connected . I have used get scxi info vi , but the
disadvantage is that it does not give the exact slot position the module is present . Please let me know any vi which does this function
Suresh Thangappan

Hello Suresh,
Thank you for contacting National Instruments.
If you have LabVIEW 7.0 or higher, you can use the DAQmx Device Property Node with our NI-DAQmx driver. I have attached an example VI to demonstrate just how easy this can be accomplished.
Regards,
Bill B
Applications Engineer
National Instruments
Attachments:
Acq_Thermocouple_Sample.vi ‏54 KB
DAQ_Device_Property_Node.JPG ‏77 KB

Similar Messages

HT4519 when i try send a email off my iphone its says my house name is ,how do i find out which is the correct name?

when i try send a email off my iphone its says my house name is wrong,how do i find out which is the correct name?

Try deleting the account and then add it back.

How to use progress indicator which block the user for editing ?

Hi All,
I have a requirement where i need to show a round progress bar while processing to the database.For example :- I have a bounded taskflow and inside it I have a two jspx page called as "First.jspx" and "Second.jspx".And i have two textboxes and one "Save" button on first.jspx page.
Now when user puts the values in the textboxes and hits the "Save" button , my ticker or progress indicator should say "Please wait while processing" and as soon as the transaction is complete , i need to show another page which is "Second.jspx" page. "Save" button action has method inside a managed bean which has some functionality and then it executes the VO(View Object) and commits the data.
How should i implement the indicator?
I have read this article :- http://www.oracle.com/technetwork/developer-tools/adf/learnmore/42-progressbarcolor-169184.pdf but it doesn't fit to my requirement.I need indicator which holds the user to edit anything on the page.Like what we get when we do any transaction in banks while navigating to payment gateway.
Please suggest!!!
Thanks and Regards,
Shah

Hi Shah,
The answer was around the same are that you were looking into. http://www.oracle.com/technetwork/developer-tools/adf/learnmore/27-long-running-queries-169166.pdf but the sample was the 27.
- Juan Camilo

How to pass an array which in the jsp to a javascript file

now i have 2 files: jsp and js(javascript)
i want pass an array which in the jsp to another file--> js file
how can i do it ???
can u give me some related links or some source codes as the references???
thx

bcos ....my senior has resigned!!! so i take over his job !!!!!
depend on the talent and the project ....only that way to implement to whole project !!!!
but , i had settled it already ....
it is very simple
in the middle.jsp
Collection result = menuManager.getUserRoleMenu(webSessionUser.getGnuserId());
String menuname[]=new String[110];
int menucounter=0;
Iterator vi = result.iterator();
while(vi.hasNext())
HashMap hm=(HashMap)vi.next();
menuname[menucounter]=hm.toString();
menucounter++;
int i;
String tempstr="";
for(i=0;i<menuname.length;i++)
tempstr+=menuname[i]+",";
session.setAttribute("menuname",tempstr);
%>
<script language="javascript">
menu123("<%=tempstr %>");
</script>
in the body,js
function menu123(string123)
//doing
so ....through the script --menu123
i can get the string from jsp to the js!!!!!
is it very simple, but it spends my 2 days!!!
i just learn javascript ....about 1 month !!!

How to detect is response deliverred to the client?

Hello everybody...
I have problem and don't know how to solve.
My server application runs on apache tomcat 5.5, and deals with some important data transactions.
After getting the request, server has 5 sec. to send response, after that clients will close their sockets.
The connection can be very slow, (GPRS), so it is very possible that transaction will not be over in that time.
I need the way to find out, on my server side, when response isn't get to client in 5 sec.
Is there any idea how to do that?
Sorry if my English is not so perfect.
Thanks

Yes, but that way of write timeout means that write have 5 sec to send buffer to the underlying protocol.
I can't know if TCP succeed or not to deliver data in that short time. I think write is asynchron.
Problem is how to detect when client is disconnect and data are not delivered.
Once again, sorry if my English is not so good.

TS1702 How can I find out which is the correct app to read a PDF on my iPhone 5?

I purchased a PDF reader from the app store, but I still cannot read the file. When I try to download the file, it states that I need an updated version of PDF. I notice there are several PDF apps available, but I don't know which is the correct one. How can I find out the correct application I need?

Select the tune and then - Get Info - in the dialog box is a note of the Apple ID used to purchase.
MJ

How to find a program which modifies the variant of a standard program?

Hi,
I have an issue where the variant values of the standard program RKEVEXT3 (Transaction : KEFC), is getting changed by a background job.I need to find the program which modifies the values of the variant.
Any input on this will be helpful.
Regards,
Raj

hi Raj,
you can change variants with FM RS_VARIANT_CHANGE. I would suggest to run a where used list for this variant in your system.
hope this helps
ec

[solved] question about two soundcards which use the same module

Hi
I have two external soundcards, an Edirol UA-25 and a MAudio Transit. Both use the snd_usb_audio kernel driver. When I only had the MAudio, I configured it to be soundcard number 2 with the following in /etc/modprobe/modprobe.conf
options snd-usb-audio index=2
Now I'd like to have one be soundcard number 2 and the other one soundcard number 3. The internal soundcard is number 0, my tv card is number 1, I don't want to change that.
How can I do this?
Last edited by Army (2011-08-26 16:31:10)

Ok, works. For documention, here's what I did:
If you have two (or more) soundcards, which use the same kernel module, this is what you need in your modprobe.conf (or call this file just like you want, it only has to be in /etc/modprobe.d and has to be called *.conf)
options snd-usb-audio index=2,3 vid=0x0582,0x0763 pid=0x0074,0x2006
This is what I have now. Index is the number of the card, e.g. you see those numbers in alsamixer when you press F6. The vids and pids you can get with
lsusb -v|grep idVendor # this is for the idv
lsusb -v|grep idProduct # this is for the idp
Just pick the line which stands for the soundcard, put these ids into the *.conf file and you're done. Now it doesn't matter in which order you plugin the soundcards, they get the right index.
Quite easy after all

How to delete lock entries generated by the function module "BAPI_OBJCL_CHANGE"

Hi experts,
I'm now trying to make an add-on program
which updates material master information by the background job.
To update the "Classification" view of material master,
the program calls the function module "BAPI_OBJCL_CHANGE".
If the "RETURN" information is valid,
then the program calls "BAPI_TRANSACTION_COMMIT" (with the "wait" parameter 'X').
Contrary to my intention,
lock entries generated by the function module "BAPI_OBJCL_CHANGE" remains after "BAPI_TRANSACTION_COMMIT".
As a result, the material updated remains locked until the add-on processing ends.
To shoot this trouble, I read some SCN discussions below:
<<lock unlock record>>
⇒ As I wrote above, I checked the parameter for "BAPI_TRANSACTION_COMMIT".
<<BAPI_OBJCL_CHANGE Lock Error !>>
⇒ I cannot call the function module "BAPI_OBJCL_CHANGE" with "IN UPDATE TASK" option
because of "BAPI_OBJCL_CHANGE" attributes.
("BAPI_OBJCL_CHANGE" is not a "Update Module".)
How can I delete lock entries generated by the function module "BAPI_OBJCL_CHANGE" ?
Thanks in advance.
Tom

I quess/hope you want to remove locks in you caller program and not locks required by the update task processing to insure database consistencies...
Did you use the WAIT option in the commit FM, else if there are no other locks in your called program a call of FM DEQUEUE_ALL could solve your problem.
Regards,
Raymond

How to add an error message in the application module?

Hi,
I have some code running in the application module. I want to display error messages in the messages section of the screen if an error happens in my code.
How could I achieve this?
I am using JDeveloper 10G
Thanks

Muhammed,
Have you tried throwing a JboException in your AM code?
John

How do I search and work in the map module without losing my selection

I'm going through my old photographs that predate geotracking and adding my best guess as to their locations via the map module but I'm getting frustrated.
My biggest angst is the selections. In the library module, I look around and find a set of photographs that were taken at the same place and I select them. I then go to the map module and move found, sometimes search, for the place where the photographs were taken. Now, I go back to drop the selection into the map and ... OH NO!!! .. there is no selection. Double angst is I click back in Library and I'm scrolled all the way to the start of my group of photographs.
Deselecting the photos is the biggest UI mistake that Lightroom is making in this sequence. I'm wondering if there is something that I can do to either prevent it or perhaps have a second method of a quick temporary group of photographs.
The other related question I have is if anyone has a suggestion of how to mark these photos as the type of GPS information. e.g. it could come from the camera, it could come via a track log, or it could be just my best guess. Perhaps that is already possible to determine.

When you find the photos you want that were taken in a single location, select them and put them in a Quick Collection (press B)
Then select the Quick Collection and go to the Map Module with the filmstrip turned on. You will then be able to work ONLY with this set of photos that are taken in one location

How to create a pushbutton delay in the FPGA module in Labview 8.2

I am a very inexperienced programmer of Labview, and I have what I thought would be a simple problem. I have a CompactRIO system that utilizes Labview 8.2 as well as RT and FPGA modules. I am running an end of line tester that uses a pushbutton to start the test. I am looking to force an operator to hold the test start pushbutton for one second before testing begins. If the pushbutton is released before the second is up, the test will not start. In the FPGA module, I cannot figure out how to accomplish this. I have tried using both flat sequence and while loops, but I cannot get the program to work as stated above. With the flat sequence there is not a way, that I could see, to break out of the sequence should the pushbutton be released. Using the while loop, I was closer to a solution, but could not get the program to read the input consistently. I did verify that the 24Vdc signal is getting to the input card whenever the pushbutton is pressed. The program worked fine without trying to add the delay when I was just looking for a transistion to 24Vdc on the input card when the pushbutton was pressed.
Any ideas? Thanks!

Here's how you might do it with a button on-screen in LabVIEW for Windows. If you need more specific help, post your code, or a small portion of it that demonstrates the bit that you can't get working. (The snippet is in LabVIEW 2009 since that's what I'm using, but the attached VI is saved for 8.2)
Attachments:
Hold 1 Second.vi ‏8 KB

How to catch exception i defined in the function module

I defined the exception 'no_value_found' in the function module, now, the problem is how to catach it in the program calling it

Hi Atish
    I have used sy-subrc to handle it in the program, howerver, it is still encounter runtime error:
Error message -
A RAISE statement in the program "SAPLZERC" raised the exception
condition "NO_OBJECT_INFO_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
No object information found
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Errors is at following position:----
39   ELSE.
>>     RAISE NO_OBJECT_INFO_FOUND.
41   ENDIF.

How can I make a copy of the FAQs module or filter on language?

Hi,
is it possible to make a copy of the FAQs module? I need to have FAQs in different languages.
I can add event, photo, news ands media modules but not a new FAQs module.
I also found that you can add a category and display the FAQs with the filter: cr or individual filter. But where do I add the category name to filter on?

Solved!
Quick solution: the ID is used for the category name, so I need to do a time consuming process to find the id.
Result:
{module_faq,c,19227,,ajax,}
Great!

How do I find out which "page" the user was on

I am using JAVA servlets and XSLT's to create a web service. I need to know how I can use the HTTPRequest that is sent to me to the server to find out, which "page" they were on when they clicked the login link.
The login link appears on all "pages" and once they click it a loginServlet is activated an a login page is shown. I need to know which "page" they were on so I can take them back to it after login has completed.
So take for example I am at http://localhost:8080/contact/ and then they clicked a hyperlink with value http://localhost:8080/login to call loginServlet. I know getPathInfo will give me the "/login" but how do i get that "/contact" so i can send them back to that page once the system has logged them in.
Any help, suggestions, comments would be highly appreciated it. Thanks.

Retrieve the "Referer" value from the requestHeader:
String referer = request.getHeader("Referer");Notice the misspelling, you must spell it this way. BTW, check for nulls. I don't think there's any guarantee this value is set, although I've never run across a situation where it wasn't.

How to detect as to which slot the SCXI module is present

Similar Messages

Maybe you are looking for