How to determine allowed names?

Using Labview and an IVI-COM driver to talk to an oscilloscope. How can I determine the allowed names that I can use?

You should have received this information from the vendor that sold you the IVI-COM driver.
You might also consider using a native LabVIEW driver for your scope. If NI has one, I think it will be easier to use. Look at ni.com/idnet to see the available drivers.
Brian

Similar Messages

  • How to determine domain name in db_link?

    Hi all,
    when executing:
    create database link TST connect to myuser identified by pippo using 'MYTNS';I obtain the db link name with a suffixed domain, for example:
    TST.DOMAIN.COM
    Where does that domain come out from?
    How to determine it before db link creation?
    thanks a lot
    aldo

    solution found in thread
    REGRESS.RDBMS.DEV.US.ORACLE.COM  concates to every databaselink name.

  • How to determine the name or type of a control in a existed VI?

    I got a couple of VIs other engineers created before. There are a couple of controls I can not tell the type or name of that control.
    I used LabVIEW ctrl-H to try to figure out what control was used but failed. I also tried to use "Edit\Customize Control" to determine that control, still could not find it.
    Please advise how can I figure out what kind of controls were used in some existed VI. Thanks,
    RY

    The name of the control is its label. It may have an empty label, meaning no name. It's also possible its label is invisible. Right click it and go to Visible Items to find out.
    As for the type, the color and shape of the icon is usually the best way to tell.
    Right click the diagram terminal of the control and select View as Icon. This might help you. If it doesn't, I suggest you post the 2 controls in an empty VI, and I'm sure someone can figure it out.
    Try to take over the world!

  • "Who ran me" - how to determine the name of the dbms_scheduler job that ran me

    Hi Community
    I can see plenty of examples out on the interweb which shows how you can use dbms_utility.format_call_stack to find the hierarchy of procs, functions and packages that got me to a particular point in my code.
    For example, if proc (procedure) A calls proc B, which in turn calls proc C, in the code for proc C, I can query the call stack to find out that proc C was called by proc B which in turn was called by proc A
    However, I want to extend this further.
    For example, using the example above, if proc A in turn was started by a dbms_scheduler job, I want to determine (within proc C) the name of the dbms_scheduler job which started the whole process off.
    The reason I want to do this is that I have inherited a (massive) system which is undocumented. In many places within the code, email alerts are sent out using a custom "MAIL" package to designated users (now including me) when certain long-running processes reach certain milestones and/or complete.
    I have added to the custom "MAIL" package a trailer on the mails to show the call stack. I also want to show the name of the dbms_scheduler job which started it all.
    Over time, this info may help me in building the "map" of how the whole undocumented system hangs together and in the meantime, to assist in troubleshooting problems
    Looking forward to hearing from you
    Alan

    Use USER_SCHEDULER_RUNNING_JOBS or DBA_SCHEDULER_RUNNING_JOBS there is column SESSION_ID and when you know your session ID build query is very simple.
    select owner, job_name
    into ...
    from dba_scheduler_runnig_jobs
    where session_id=sys_context('USERENV','SESSIONID');
    You must declare local variables in PL/SQL procedure to read owner and job_name into them. Second thing, you must handle possible exception no_data_found than can be raised when procedure is not run from job.

  • How to determine database name I am connected to ?

    I would like as simply and fast as possible to determine the database name, which I am currently connected to. Maybe the property jbo.sql92.JdbcDriverClass would do, but how to get its value ? Thanks for any suggestions.

    Ricky,
    don't understand that, why you don't use the session, when you are in BC4J (AM.getSession()) - which will give you at least the URL you connect too (in case you use a datasource - bad luck, as it is defined within the container ..)
    thx clemens

  • How to determine InfoCube name within the update rule start routine?

    We are attempting to delete all the records where all key figure values are zeroes. We have about 15% of such records and we really don't need them.
    We have yearly InfoCubes. We copy the InfoCube and update rules at the end of every year. So, we don't want to hard code any field names within the update rules.
    If I could determine the target InfoCube name within the update rule start routine, I can find out all the key figures dynamically. But, I don't see a way of finding out the InfoCube name.
    If you would share any ideas, I would really appreciate.
    Thanks.
    Sudhi Karkada.

    Hi Sudhi,
    I dont know if this is what you are looking for.
    if you want to delete a record from being inserted when all the Key figure values are ZERO then you can use a Update Routine for some characteristic in the below way
    If looking for the InfoCube:
    if COMM_STRUCTURE-KF1 = 0 and COMM_STRUCTURE-KF2 AND....
      RETURNCODE = 4.
    else
      RESULT = COMM_STRUCTURE-ChanracteristicObject.
    endif.
    If it is to an ODS / InfoCube in the start routine.
      DELETE DATAPACKAGE where KF1=0 and kf2=0 and .....
    Hope it helps.
    Regards,
    Praveen.
    ENDLOOP.
    Message was edited by: Praveen

  • How to determine program name in static main

    What code can I execute in static main to get the name of the class provided as an argument to the java interpreter on the command line (since args doesn't include it)?
    Or is this simply not possible in Java?
    Why do I need this? I'm subclassing the class that defines static main, using the subclass as the program class, and want to instantiate it reflectively in main. Currently, I'm passing in the subclass name as an argument, so it appears on the command line twice, which seems awfully silly.

    JoachimSauer wrote:
    shdanfo wrote:
    The question is very simple: In Java, is it possible to execute code in static main that returns the name of the program class provided to the java interpreter?Let me get that straight.
    You have something similar to this:
    public class Foo {
    public static void main(String[] args) {
    String programName = ...;
    System.out.println(programName);
    }And you want to know what your have to replace "..." with so that the program outputs "Foo". Is that correct?
    I'd suggest either Foo.class.getName() or even simpler "Foo".I don't know if I'm getting this wrong now or not. It also sounds like the OP wants to know the name so that he can use reflection to create an instance. But all of that code could in that case be replaced with:
    public class Foo {
        public static void main(String[] args) {
            Foo foo = new Foo();
    }    Since he knows that this implementation of main is located in the class Foo.
    Kaj

  • How to determine method name at runtime

    hello,
    i try to get method name at runtime..i have a logger and i need this info for logger
    private void method(){
    myLogger.debug( "exception in " + getExecutedMethod() ); /* output should be: exception in method */
    }best regards
    cem

    bcem wrote:
    what i needed was
    [http://today.java.net/pub/a/today/2008/04/24/add-logging-at-class-load-time-with-instrumentation.html|http://today.java.net/pub/a/today/2008/04/24/add-logging-at-class-load-time-with-instrumentation.html]
    regards
    cemYou could also use AOP to add logging. But really, any sort of injected logging is going to be of limited value, since it's very generic and "this method was called with these parameters"-esque. Explicit logging is a lot more descriptive and useful, particularly to support staff who probably won't know what any particular method does

  • How to "hover" over a smiley / emoticon to determine its name

    I have recently been transitioned from my Torch to the Z30.  I'll spare my comments on the various frustrations.  However, one minor item I haven't found an answer to is how to determine the name of a smiley / emoticon in BBM before inserting it.  Previously, with the torch, I could scroll through the emoticons before selecting one.  While scrolling, the name of the current emoticon would display without it having to be selected.
    I can't figure out how to determine the name of an emoticon on my Z30, whether or not I have selected it.  I can hit the backspace once I've selected/inserted it, which will give me the text representation, but that doesn't tell me, for example, what "=]Y" means.  How do I determine the name of a smiley before inserting it so that I don't inadvertently pick the wrong one?

    If I understood the question, you are talking about migrating Active Directory. After checking your event viewer and keep your old "primary" DC running without problems, all you need is to:
    1. Promote the new server as additional server
    http://social.technet.microsoft.com/wiki/contents/articles/20098.setting-up-additional-active-directory-domain-controller-with-windows-server-2012.aspx
    2. Transfer FSMO rules to the new one
    http://blogs.technet.com/b/canitpro/archive/2014/04/02/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
    3. Install DHCP on the additional server and configure the scope
    http://blogs.technet.com/b/teamdhcp/archive/2012/08/31/installing-and-configuring-dhcp-role-on-windows-server-2012.aspx
    4. Demote the old server
    http://technet.microsoft.com/en-us/library/jj574104.aspx
    and voila...
    I recommend to keep your network infrastructure connected to a UPS instead of the nature to avoid failure by lightning.
    Regards,
    If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY
    suggestion in a test environment before implementing!

  • How to determine the maximum allowable length of a filename for Window ?

    Hi all,
    Could I know how to determine the allowable file length (the length of the absolute path) for a file in Window environment?
    Due to some reason, I generated a zip file with a very long filename ( > 170) and put in a folder(the length of the folder path around 90). The length of the absolute path is around 260.
    I used FileOutputStream with the ZipOutputStream to write out the zip file. Everything is working fine while i generating the zip file.
    However, while i try to extract some files from the zip file i just created, i encountered the error
    java.util.zip.ZipException The filename is too long.
    I am using the class ZipFile to extract the files from the zip file like the following
    String absPath = "A very long filepath which exceed 260";
    ZipFile zipF = new ZipFile(absPath);  //<-- here is the root causeIs it possible to pre-determine the maximum allowable filepath length prior i generate the zip file ? This is weird since i got no error while i created the zip file, but have problem in extracting the zip file ......
    Thanks

    Assuming you could determine the max, what would you do about it? I'd say you should just assume it will be successful, but accommodate (handle) the possible exception gracefully. Either way you're going to have to handle it as an "exception", whether you "catch" an actual "Exception" object and deal with that, or manually deal with the length exceeding the max.

  • In OLS, how to determine the list of labels a user is allowed to use?

    subject says it all; we have determined how to determine ALL labels available, but how do we filter it via existing lbac tables to show the labels the current user (either direct or via proxy) can use?
    thanks, alan

    Hi there,
    maybe these views do help:
    http://st-doc.us.oracle.com/10/102/network.102/b14267/admpriv.htm#i1012870
    Thanks, Peter

  • How to determine the schema name from stored function or procedure

    Hi all
    I need to find the way to determine the name of shema in which the given stored procedure residing. This SP is created with AUTHID CURRENT_USER what means that expression like SYS_CONTEXT('USERENV','CURRENT_USER') or SYS_CONTEXT('USERENV','CURRENT_SCHEMA') will be return the name of user or schema of user which calls given SP.
    can somebody help me?

    What is the problem you are trying to solve?
    Presumably, when you're creating a stored procedure, you know what schema owns it. So it's pretty trivial to simply create a local variable L_OWNER in your procedure, assign it the value of the schema owner, and then use that owner. Most people don't really need to figure out at runtime what they already knew at compile time.
    Barring that, you could inspect the data dictionary as user130038 suggested. That requires that you know the name of the procedure (which would likely also have to be a local variable that is initialized to a hard-coded value. And if there are multiple users that own procedures with the same name, it may not be reliable.
    Inspecting the call stack is the most reliable and dynamic approach. But it is also the most costly in terms or runtime performance and in terms of code complexity.
    Justin

  • How to determine the ROWNUM in a Master Detail Form

    Hello,
    I am working in a Master Detail Form with Orders and Order Items Information; and I created a process that allows the users to select a Product ID on a tabular form, and the next column is populated automatically with the Product Description.
    To achieve that, I followed some instructions by Denes Kubicek (http://apex.oracle.com/pls/otn/f?p=31517:241), but my case is slightly different:
    <ul>I am using a wizard-created tabular form, instead of a manual tabular form; and </ul>
    <ul>Instead of using another page as a Popup to pass the parameter of the ROWNUM, I am using a plug-in called “Tabular Form Super LOV” which is a modified version of the SkillBuilders’ Super LOV that works on Tabular Forms. </ul>
    The Product ID is returned in the correct row by the plug-in; but in the case of the Product Description, it is always returned into the first row; and my problem is that I don't know how to determine the row where the user clicked to call the plug-in.
    I set up an example in apex.oracle.com in case someone would like to look at it:
    Workspace: ediazjorge
    Username: test
    Password: test
    App Name: Sample App
    App Number: 1550
    BTW, I am using Apex 4.1.1.00.23 and Oracle DB 10.3.2.
    Thanks in advance,
    Erick

    Hello VC,
    Thank you for your time and help.
    Unfortunately, it is still not working properly:
    1. When the Popup LOV opens, the first row of the tabular form is 0, the second row is 1, and so on. How can I assign the values starting with 1 and in the format *0001* ? (I am still a novice on Apex and new to JavaScript :-), sorry about that).
    --2. Also, when I close the Popup LOV, the value of P1_ROWNUM is ‘undefined’ again so I'm not sure if the Product Name column will be populated.--
    3. And finally, you are using the jQuery Selector uPopupLOVIcon, which is an attribute of the Cloudy Theme. In my real application (Apex 4.1.1.00.26), my element looks like: *<img src="/i/lov_16x16.gif" width="16" height="16" alt="Popup Lov" alt="List" style="vertical-align:middle;" align="middle" />*. What do you recommend me to use as a jQuery Selector?
    Again, I really appreciate your help and time. I think you solved the most difficult part.
    Thank you so much,
    Erick
    Update: I just found out that the problem with my comment 2 is because I didn’t delete the previous dynamic action that set the value to P1_ROWNUM.
    Edited by: ediazjorge on Sep 18, 2012 11:20 AM

  • How can I allow a user (client) to choose a local image file (on his hard d

    How can I allow a user (client) to choose a local image file (on his hard drive) and modify it using an applet from his browser ? I am trying to develop a web page that enables the user to choose an Image file, manipulate the image using a java applet, and display the results.
    Using Java�s �JFileChooser� does not work when called from a browser, probably due to security privileges issues. On the other hand, I can choose and upload any file using a JavaScript form:
    <FORM METHOD="POST" ENCTYPE="multipart/form-data" ACTION="process.asp">
    <INPUT TYPE=FILE NAME="file1"><BR>
    �
    It seems that I can choose an image file with a Java script form and process an image with an applet. How can I choose a file AND process it locally ?
    (I do not wish to upload the file to the server using JavaScript form and then back to the client�s applet for processing since it will be a tremendous waste of resources).
    Will appreciate any solution.
    Thanks !
    ( my email is: [email protected] )

    "Using Java�s �JFileChooser� does not work when called from a browser, probably due to security privileges issues. "
    You can do this if you sign the applet...

  • Integration MIRO error, how to determine the VST related accounts.

    integration Miro error.
    Hi gurus,
    please resolve the problem urgent.
    while doing MIRO Iam getting the following error.
    after given PO number in MIRO I getting the following error. please how to resolve the problem.
    where i can determin the accounts, which accounts will be effect.
    Error in account determination: table T030K key ASHA VST V0
    Message no. FF709
    Diagnosis
    In the chart of accounts to be posted to, no accounts are defined for the tax code you used.
    Procedure
    Contact your system administrator.
    Define the accounts to which a tax posting is to be made with the tax code entered in Customizing for taxes on sales/purchases.
    To do this, choose Maintain entries (F5).
    How to determine VST

    I have already replied to the same question in one of ur earlier posts.
    If you want to knowthe GL accounts which are used presently for the transaction VST, you can go to table T030K give the field name KTOSL value as VST and execute. YOu will get the list of all GL accounts which use the transaction VST for all possible tax codes and Chart of Accounts.

Maybe you are looking for