How to determine the execution order of event structure

Hi everyone,
I have an event structure were it contains four events. All the four events has separate buttons to execute. Here, three events will generate numeric output, remaining one event (Finder) should find the order of those three events. For example, Three events namely A, B and C. I execute the events in the order of B, C and A. The finder event should find the order of previously executed events(B, C and A).
Thanks in advance.
Solved!
Go to Solution.

Hello Vij@y,
I could not look in to your VI because I dont have LabVIEW 2013 (I have 2010) but i tried to understand the situation you are explaining.
Please find attached image of front panel I made for your reference.
Here I generated two events sequently, no 3 first followed by no 1 and the same is displayed in sequence array. now you can use the build array function to actually add each event to this array as explained by many people in this forum.
regarding the timeout event, either you can display the sequencer array in that event or you can display it in finder event and then you can reset the sequencer in finder event (I used reset button click event to reset sequencer back to zero value)
regarding getting zero when you press finder/reset button before triggring any other event:- Is it not correct to have empty array when you have not trigger any event?
I hope I put it well and may help you to find solution.
With Regards
Miraz
Kudos is better option to thank somebody on this forum
Attachments:
Sequence.png ‏70 KB

Similar Messages

How to change the execution order of data control and backingbeans

Hi,
I have a form for a BPM human workflow. It has an inputText and a selectOneChoice component in the form.
The list of value for the selectOneChoice is initiated based on the value in the inputText.
I have a data control - JavaBean, which returns a list of values based on a parameter for the selectOneChoice and the parameter is binded with the value of inputText defined in a backingBean. I also set the default value of the inputBox in the backing bean with setValue().
The problem I have is that the data control for selectOneChoice is loaded before the inputText or backingBean is loaded. Therefore, the parameter is null.
I tested the same combination in an ADF web app and it works fine. In the app, the inputText and the backingBean are loaded first and then the value of inputText is sent to the data control.
How can I change the order of the execution? I need to make the inputText and backingBean loading first before the data control for the list of values loading.
Edited by: user626218 on Oct 10, 2012 9:25 PM

Hi,
The inputText is pre-populated based on the user profile in the BPM instance. I tried to render the selectOneChoice if the value of the inputText exists but the data control for selectOneChoice is loaded before the backingBean so it keeps getting a null as parameter.

How do determine the work orders for a sales order?

I'm forced to calculate our costs by sales order. So for a given sales order number, how is this linked to the work order that created the items on the sales order?
Thanks

Hi,
Check this:
Re: Open Production Orders List with a Field from Sales Order
Thanks,
Gordon

How to control the tab control using event structure?

Hi,
I am using tab control and event structure in the program.
When i run the application event is not happening for the active page.
When user switches from active page to the other page then event is taking place for all pages
So, how to get the event trigger for the active page when the application is started
For more clarification i am attaching the code "Test Control Tab using Event Structure.vi"
Attachments:
Test Control Tab using Event Structure.vi ‏52 KB

You have a basic misunderstanding of dataflow. Maybe you should start with some tutorials or study some of the examples that ship with LabVIEW.
The event structure belongs inside the while loop, and not vice versa. RIght now, the event structure only runs exactly once and never again.
If the stop is pressed first, the VI will stop. Game over.
If the tab control is changed (from any state to any other state!), the inner loop will spin forever as fast as the CPU allows, either executing one or the other case. It just reads the tab terminal to decide which case to execute. Changing tab never triggers any events. The VI is trapped inside the event until stop is pressed to stop the VI.
you were closer to a reasonable program in the other thread:
http://forums.ni.com/ni/board/message?board.id=170&view=by_date_ascending&message.id=287905
Have you tried execution highlighting? Maybe things would become more clear of you do.
LabVIEW Champion . Do more with less code and in less time .

How to determine the positioning order when using tab key?

Hallo,
in my jspx-page i want to define the order which the cursor jumps when the user is using the tab key.
i don't know how to? in html there i can use tabindex. which way i must go?
Any help is appreciated.

I found that tabindex is not applicable. But i think it is an important point for better handling.
Is there no easy way to do it?

How do I determine the size of an event (cmd I does not show any size for events).

How do I determine the size of an Event in iPhoto? (Cmd + I does not show size information at the event level).

If you're running iPhoto 8 (09) select the event and look at the Info pane at the lower left hand corner of the window. It will give you the number of photos and size:
for iPhoto 9 (11) open the Event, select all of the photos in it and open the Info drawer at the right by typing Command+i. The number of photos and size will be at the top of the Info drawer.
OT

How to determine the source of Events triggered in a process chain

Hi ,
We have almost a 100 process chains, and of these approx 20-30 local process chains are triggered by events raised within other process chains. These events are raised via BP_EVENT_RAISE using the ABAP process type.
However, our problem is to identify the source of these event trigger - i.e. which process chain triggered this event ?
Looking at SM64, the event history does not display the source for these events.
Is there any table or program that we can use to determine the source of these events which are triggered.
Any help is much appreciated and points awarded.
thanks
BK

Hi,
do check in the program /SSA/BWT . or TCODE - ST13 -- enter BW-TOOLS and execute. -- Choose Process chains and execute --- Select the date and time for which you want to see the process chains and execute again.
This will give you the entire list of process chains triggered, status, timings(start, end, overall runtime). Once clicked on the process chains it will show you the steps in theprocess chains, data loaded in the data targets, source system, etc...
hope it helps.

How to get the execution time of a Discoverer Report from qpp_stats table

Hello
by reading some threads on this forum I became aware of the information stored in eul5_qpp_stats table. I would like to know if I can use this table to determine the execution time of a worksheet. In particular it looks like the field qs_act_elap_time stores the actual elapsed time of each execution of specific worksheet: am I correct? If so, how is this value computed? What's the unit of measure? I assume it's seconds, but then I've seen that sometimes I get numbers with decimals.
For example I ran a worksheet and it took more than an hour to run, and the value I get in the qs_act_elap_time column is 2218.313.
Assuming the unit of measure was seconds than it would mean approx 37 mins. Is that the actual execution time of the query on the database? I guess the actual execution time on my Discoverer client was longer since some calculations were performed at the client level and not on the database.
I would really appreciate if you could shed some light on this topic.
Thanks and regards
Giovanni

Thanks a lot Rod for your prompt reply.
I agree with you about the accuracy of the data. Are you aware of any other way to track the execution times of Discoverer reports?
Thanks
Giovanni

IMP: How to delete the service order

Hey Experts,
Can you tell me how to delete the service order which was created in IW31..? or we have any Functions Module to delete the service order?
and one more question is I have more than 100 service order in the table ,but it will display only 50 order when i execute this Functions Module BAPI_ALM_ORDERHEAD_GET_LIST
can you tell me how to solve this problem...?
Thanking you in advance,
Regards
J Sarathi

This is what the BAPI_ALM_ORDERHEAD_GET_LIST documentation says
"You can use this method to determine a list of orders according to a list of selection criteria. The number of hits that are produced for the person calling up the list, can be specifically reduced; without further parameter transfers, the first 50 hits are displayed. A complete list of the hits is stored internally. If you call up the selection again within a Logical Unit of Work (LUW) without changing the selection parameters, but with other refurbishment parameters, then you receive further partial quantities of the selection result, as specified by you."
and for deletion
check whether you can set any deletion status through the fm BAPI_ALM_ORDER_MAINTAIN
Also check the business objects BUS2007, BUS2088

How to determine the ROWNUM in a Master Detail Form

Hello,
I am working in a Master Detail Form with Orders and Order Items Information; and I created a process that allows the users to select a Product ID on a tabular form, and the next column is populated automatically with the Product Description.
To achieve that, I followed some instructions by Denes Kubicek (http://apex.oracle.com/pls/otn/f?p=31517:241), but my case is slightly different:
<ul>I am using a wizard-created tabular form, instead of a manual tabular form; and </ul>
<ul>Instead of using another page as a Popup to pass the parameter of the ROWNUM, I am using a plug-in called “Tabular Form Super LOV” which is a modified version of the SkillBuilders’ Super LOV that works on Tabular Forms. </ul>
The Product ID is returned in the correct row by the plug-in; but in the case of the Product Description, it is always returned into the first row; and my problem is that I don't know how to determine the row where the user clicked to call the plug-in.
I set up an example in apex.oracle.com in case someone would like to look at it:
Workspace: ediazjorge
Username: test
Password: test
App Name: Sample App
App Number: 1550
BTW, I am using Apex 4.1.1.00.23 and Oracle DB 10.3.2.
Thanks in advance,
Erick

Hello VC,
Thank you for your time and help.
Unfortunately, it is still not working properly:
1. When the Popup LOV opens, the first row of the tabular form is 0, the second row is 1, and so on. How can I assign the values starting with 1 and in the format *0001* ? (I am still a novice on Apex and new to JavaScript :-), sorry about that).
--2. Also, when I close the Popup LOV, the value of P1_ROWNUM is ‘undefined’ again so I'm not sure if the Product Name column will be populated.--
3. And finally, you are using the jQuery Selector uPopupLOVIcon, which is an attribute of the Cloudy Theme. In my real application (Apex 4.1.1.00.26), my element looks like: *<img src="/i/lov_16x16.gif" width="16" height="16" alt="Popup Lov" alt="List" style="vertical-align:middle;" align="middle" />*. What do you recommend me to use as a jQuery Selector?
Again, I really appreciate your help and time. I think you solved the most difficult part.
Thank you so much,
Erick
Update: I just found out that the problem with my comment 2 is because I didn’t delete the previous dynamic action that set the value to P1_ROWNUM.
Edited by: ediazjorge on Sep 18, 2012 11:20 AM

How to determine the download media required from my License key?

Hi
After recently rebuilding a dead PC, The user has advised me she used to use Illustrator.
Unfortunately the user does not have the install media available.
Support advised my license key is a volume license for Design Standard.
I have downloaded Design Standard (Universal) but the Licence key is not accepted.
Can anyone advise how to determine the correct download based on my License key?
Many thanks

Some times you may need to sign in to volume licensing account and download
refer
Adobe Licensing Website | Serial numbers | Orders | Accounts

How to determine the u2018equivalent position of the same organizationu2019?

Hi,
"Position change is a transfer from one position to an equivalent position within the same org reporting structure and under the same chief position"
How to determine the u2018equivalent position of the same organizationu2019?
Cheers.

u can identity the position with help of the Holder
say for ex: A is the holder of the Position for Executive now the user performent an event called change of position so he changed to Manager (here we can find the chageing on the basis of some parameter so i have taken holder as Parameter as we dont know which has changed or wht has changed)
in this case we can use the report RHDESC20 se38
not an exact solution for ur question
will try to find some other way

EEWB : how to determine the business object and the extension type ?

Hi,
I ask myself how to determine the business object and the extension type to use to add new fields in a new tab of a specific transaction ? what means each business object, does that correspond to a specific transaction ?
I need to add a new tab in the BaMI business activity in transaction CRMD_ORDER just after the tab 'Actions' at header level.
Could you help me please to determine which business object and extension type I have to select during creation of the project and which business object category I have to select during creation of the extension (wizard) ?
Thanks for your help,
Marie

Marie,
In order to determine what type of transaction you are extending, you will need to look at the customizing for the transaction.
In the IMG:
Goto:
Customer Relationship Management->Transactions->Basic Settings->Define Transaction Types.
You will then choose the transaction defined that you want to extend. If you display the details of the transaction you will find an attribute called:
"Leading Transaction Category". This tells you the general context in which the transaction is used. The other item to view is the assignment of business transaction categories found in the maintenance screen.
This information general corresponds to one of the options that the EEWB will give you on the transaction type.
As far as extensions go, my recommendation is the following:
- Use CUSTOMER_H Customer Header Extensions for any new fields at the header level.
- Use CUSTOMER_I Customer Item Extensions for any new fields at the item level.
Unless you have a specific requirement to extend a segment of the transaction, I recommend placing all new fields in these segments. The CUSTOMER_H & CUSTOMER_I segments are considered "standard" segments, that are already built into all the necessary API structures.
Let me know if you have any further questions.
Good luck,
Stephen

About the execution order

I have a question about the execution order of the program, which bothers me for a long time.
If anybody knows how to resolve it, please help me and thanks a lot.
The code is very simple and as follows in class ExecutionOrder.
I would like the output is:
Thread is going to start!
Thread is running!
Thread is ended!
But actually the output is always:
Thread is going to start!
Thread is ended!
Thread is running!
public class ExecutionOrder extends Thread
    private static ExecutionOrder mainThread;
    public static void main (String[] args)
        mainThread = new ExecutionOrder ();
        mainThread.test();
    public void test (){
        testStart();
        mainThread.start();
        testEnd ();
    public void testStart (){
      System.out.println ("Thread is going to start!");
    public void testEnd (){
      System.out.println ("Thread is ended!");
    public void run ()
        System.out.println ("Thread is running!");


Resources for learning about threads:
Java's Thread Tutorial
JavaWorld: Introduction to Java threads
IBM: Introduction to Java threads
Google: java+threads+tutorial

How to get the Purchase order Qty in the object dependency

Hi,
We are using variant pricing in the purchase order. I have condition type say u201CZVBPu201D for Pallet cost. I defined Pallet cost as 5 USD per each (pallet). I have to calculate Number of pallets = Purchase order Qty/ 5. The number of pallets should be rounded to nearest integer.
My question is how to get the Purchase order Qty in the object dependency?
Is there any reference table and field can be used to get Purchase order Qty just like we use MMCOM-VKOND for variant pricing.
Appreciate your help
Thanks,
Srini

Hi,
1. I do not have system now so I can not conclusively tell about table field .
2. Since I did it long back so I also do not exactly remember it, there are more than one place where PO qty appears for example Item overview and Item details - one of the PO qty when used in the characteristic do pull the PO qty which can be used for variant pricing (so request to please update the forum with the correct table and field once you find it - in the meantime if I get opportunity to get to system I will also try and find out ).

How to determine the execution order of event structure

Similar Messages

Maybe you are looking for