How to determine the number of rows to be displayed in a report

hello experts,
Has anyone ever come across this requirement before? Before a report finishes being executed and before it displays the results, is there a way to determine the number of rows to be displayed as the result?
Many thanks in advance.
Regards,
Inma

Hello Arun,
Thanks for your reply but do you know which method I should use for this purpose if I use the table interface?
Thanks,
Inma

Similar Messages

How to increase the number of rows to be displayed in BEx Web Analyzer

hi,
I am viewing reports using BEx Web analyzer option. It is displaying only 24 rows of data at a time. How to increase the number of rows? do i need to any kind of settings?
pls reply.

Hi,
I think the standard template in 2004s is named 0ANALYSIS_PATTERN. You can find it in Web Application Designer, open, and search for the technical name. If you want to change the number of rows or columns, you can find this setting near the bottom of the XHTML view of the template:
<bi:BLOCK_COLUMNS_SIZE value="4" />
<bi:BLOCK_ROWS_SIZE value="17" />
Then just save, and ignore the error messages.
Message was edited by:
vind Reinsberg

How to determine the number of rows of data in a datatable?

I have a datatable that I fill from an SQL query. I do not know exactly how many rows of data it will return (due to my selection criteria) but will be somewhere between 100 and 300 rows. I send this data into a report but need to determine the length of the report (panel height data member) programatically based on how much data the query has returned. So, I need a way to count how many rows are filled in the data table.
I tried doing a nested "if" statement checking the value of each cell but when I tested the expression at 59 "if" statements (will need 300+) I got a parser error in lookout when I tried to accept the connection. I also tried a type of loop by assigning cursor.2 either to its own value (circular) or to its own value plus one depending on the value of the cell at cursor.2. It was close but overshot by one row or more (much more sometimes).
Any clever ideas? Perhaps I have just been looking at this problem too long. Thanks, in advance, for your help.

Since the datatable gets the data from the SQL query, you can also use the SQL statement to count the number of rows in the query result.
For example, in datatable you do "select localtime, trace1 from intdata where xxx". You can get the count by "select count(trace1) from intdata where xxx". Use the same condition in order to get the same number of rows.
Maybe another SQLExec object is needed to do the count.
Whenever the datatable executes the SQL, the SQLExec executes and return the count.
Ryan Shi
National Instruments

Smartforms table: how to fix the number of rows to be display in the table.

Hello.
I´m having problems with a smartform. I have defined a window with 7 cm high. Then I have define a table to print the content of a table.
I'm using the header, the main area, and the footer. It seems to be ok. But the main area is sizeble. I mean, that if in the table has 2 records, it dispaly the 2 records and inmediatly display the footer. It probably use only 3 cm of the 7 cm defined for the high of the window.
And I want that the footer of the table would be display at the end of the 7 cm of the window. Is that posible ?
Please, tomorrow we will have our kick off the module and this is the last issue we have.
Thanks in advance for your help.

Better idea wud be to create a WINDOW, just Below you Main window (After table) ..
In Form Layout (Form Painter) you can fix this Window on any place , Pass the FOOTER text node over there .. So you will get a Static FOOTER diplay ..
That what you need ?? Let me know
Edited by: Lokesh Tarey on Jul 22, 2010 7:15 AM

How to increase the number of rows in Status Oveview iView in MSS?

Hi
We have implemented MSS and have a question regarding Status overview iview.
The standard status overview iview of the team workset has 5 rows and we have to scroll using the arrow buttons to select/view a request.
Now can anyone explain me how to increase the number of rows in this iview? Is this somthing that has to be accoplished through web dynpro customization?
I checked the options in iView property and do not see any option to increase the number of rows.
please help
Thanks
-Michael

Hi Micheal,
Well, I am not really sure, if you could accomplish this using customizing, but I am sure that you can accomplish this using the JDI. Well, you can extract the application's source code using JDI and then change the required display rows property and republish it.
Am not really sure if this is suggestable method for this requirement,but it can be achieved using this JDI stuff.
Regards
<b>Raja Sekhar</b><i></i>

How to limit the number of rows in a smart form , sap script.

Can anyone tell me how to limit the number of rows in the output of a sap script/smart form. I have tried "protect/endprotect" in sap script but have no idea of how to do in smart form. In sap script the only way it has happened is by reducing the size of the main window.

Hi,
In Smartform also, why dont you try reducing the size of the window if you want to limit the rows in it. Also if you are printing Line Items in a LOOP, you can write
LOOP AT T_ITAB FROM 1 TO N in the LOOP Node if you know how many records exactly you want to display in 1 Page processing.
regards,
Mahesh

How to count the number of rows in a resultser object?

hi there
how to count the number of rows in a resultser object which may contains millions of rows? besides using a while loop? thanks

You don't, you execute a query whose result is the record count of those records that match the search and then you execute the actual query to create your record set. Typically you do
select count(id) from YourTable where [filter]
from the resulting ResultSet do
int res.getInt(1);
which gives you the count and then
select id from YourTable where [filter]
to produce the actual result set.
in the second query the id part can be substituted with the actual fields you want.

Is it possible to change the number of rows to be displayed in adf query ?

Hello,
is it possible to change the number of rows that are displayed in an adf query similar to an adf form ?
I need to display approx 5 rows per column instead of displaying all the fields in a single column ? Thanks.

Thanks , how do you add in the code ,is it something like follows :
<af:query id="qryId1" headerText="Search" disclosed="true"
                            value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
                            model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
                            queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
                            queryOperationListener="#{bindings.ImplicitViewCriteriaQuery.processQueryOperation}">
                    <af:inputText value="#{bindings.PrtDesc.inputValue}" label="Desc"
                                  required="#{bindings.PrtDesc.hints.mandatory}"
                                  columns="#{bindings.PrtDesc.hints.displayWidth}"
                                  maximumLength="#{bindings.PrtDesc.hints.precision}"
                                  shortDesc="#{bindings.PrtDesc.hints.tooltip}" id="it3">
                      <f:validator binding="#{bindings.PrtDesc.validator}"/>
                    </af:inputText>
                  <af:column>
                   <af:outputtext/>
                    <af:outputtext/>
                 </af:column>
                  </af:query>

How to increase the number of rows for Entry via Excel in SSM ?

hello
we are facing a scenario where we need to enter the target data for more than 14000 fields.So when we open the excel ad in and trying to upload, it is accepting data for only 500 fields and the rest are not getting displayed.
The condition is that we have to enter data via Entry and Approval and not using a procedure and multiple metric sets is not a feasible option since the number of records is large. How can the number of rows in excel be increased ?
Vijay

Hi Bob
I am facing another problem....
we have designed our model in such a way that we built it using normal procedures but the target values have to be entered using entry and Approval via Excel ad-in..
the problem we are facing is that if we select both the actual and the target measures to load the data via Excel login then the column TARGET is getting greyed out. When we build the same model using cube builder , the column TARGET is not getting greyed out and we are able to enter data there.
Is there any setting changes we need to make inorder to make the Entry and Approval process via Excel behave the same way when the model is built using the Cube builder ? Are there any new notes or a newer version of Excel ad in to resolve this ?
Vijay

How to get the number of rows returned by a report?

Hi,
I'm developing my first application in APEX and so far everything seems fine, except I can't figure out this very simple thing: I have a report based on a PL/SQL block returning an SQL string. I'd like to have a message (something like "X rows returned") just before the report. The closest thing I could find was "X to Y out of Z" in the pagination styles, but that's not what I want. Also I don't think running the same query to get COUNT() is wise.
Any help would be appreciated.
Thanks,
Konstantin

My guess is that it only shows the number of rows it has retrieved. I believe the defailt is for it to only retrieve 50 rows and as you page through your report it retrieves more. So this would just tell you how many rows was retireved, but probably not how many rows the report would contain if you pages to the end. Oracle doesn't really have a notion of total number of rows until the whole result set has been materialized.

How to set the number of rows that an awt.Choice can display

Dear Sir,
I want to ask how an awt.Choice can set the number of rows that it can display, like the method setMaximumRowCount in JCombobox. Since I want to set more row can be displayed, but choice no any method can set. And I have tried to add Jcombobox into awt.frame, then, the handling event function cannot receive event for the right-top cornet button(minimize, maximum, close).
Best Regards,

please post a Short, Self Contained, Correct Example showing your problem.
bye
TPD

How to limit the number of rows in the Custom Control box

Hi All,
In my Module pool screen I have a Custom Control box for providing some free text as input. Now, there is no limit in the number of rows allowed for this box.
But, the requirement is, it should have the maximum number of rows = 99. and each row should have maximum length = 60 characters.
User should not be allowed to enter more than 60 characters per row and more than 99 rows.
Could you please let me know how to do this..? Are there any methods available which controls the maximum number of rows and maximum length per row..?
Please help me in resolving the issue. Thanks in advance.
Thanks & Regards,
Paddu.

By "Custom Control Box", do you mean a Custom Container or a Table Control?
Anyway, I suggest you to use a table control (not a custom container as your requirement seems to be very precise on that point, maybe ask your client twice to make sure). Look at the examples of table controls in ABAPDOCU transaction.

How to know the number of rows in a cursor?

Hi all,
How can i know how many rows a cursor has ?
Glen

dbms_sql... you can use when you want to know how many lines of code the cursor has.
If you want to know how many rows it will fetch, you have to fetch all rows - the number of rows actually fetched are assigned to the variable <cursor_name>%ROWCOUNT.
When you don´t want to fetch all rows, all you can do is count(*)...
Regards,
Gerd

How to count the number of rows in a cube!!??

Experts,
I can somebody tell me how do I count the number of rows in my cube when i am using listcube???..
Thanks
Ashwin

Hi,
have a look ath this theard too
Number of Records in Cube
regards

How to get the number of rows in a repeating frame ?

Hi all,
When I launch a report from forms then sometimes there are data in the report and sometimes there are no data. And the problem is that when there are no data then the frame containing the repeating frame is still displaying and a blank page displays on the report.
So I want to get the number of rows from the repeating frame so that I can code a format trigger on the frame to display or not the enclosing frame depending on the existence of data from the repeating frame.
Thank you very much indeed.

Dear Friend,
You can achieve this. Define a summary column (say cnt). Select summary type as "COUNT". select any one of columns that are getting displayed in your repeating frame as summary column and provide "reset at" group name (or set this to report if you are defining this field at report level) . This "cnt" variable will contain how many records that will be fetched for your repeating frame (i.e. Group of Repeating frame). You can use this "CNT" variable in your format trigger.
In this case there is no need to write before report trigger or anything.
Regards,
Manish Trivedi

How to determine the number of rows to be displayed in a report

Similar Messages

Maybe you are looking for