How to determine which company code a customer is assigned

hi
anybody knows how a customer is connected to a company code
i know its connected to several company codes but i want to know the original company code

Hi
Anjali's question sounds valid. As per my understanding we cannot Create a customer many times. The customer will be created only once (say Customer 1000) and the same existing customer will be extended to other company codes and for other sales areas based on the requirement. The company code and the sales area details in which the customer was initially created should be traceable.
But I donot understand the reason for looking for these details.It will give more clarity on the requirement if the reason behind this requirement is also posted by Anjali.
Thanks,
Ravi

Similar Messages

  • How to see which company codes are affected by a WT

    Hello Community,
    Hope you all are doing well, I would like to consult you because I have this situation, I want to know what company codes are affected by a particular WT in an specific country, is there any report or Transaction or do you know a way to do it? I tried by launching the WT report in a large period for country area with the wt that I want to check but the problem with this is that it may exclude a company code that can have the wt active but was not generated under the period. Please your assistance.
    Thanks in advance for your time

    Efrain,
    Not exactly sure your requirement, however there is a transaction code PC00_M99_DKON which will show you the wage assignment. On the selection screen enter your country code as 10 if running for USA and the wage type. Execute it.
    When you run it for a particular wage type and expand the results 'source system' then you will see the associated Company code for which the wage type is applicable.
    Hope it helps you.
    Thx,
    Ashish

  • How find out which user is using which company code?

    Hi Gurus,
    I am having more than 500 users in Production System.I need to find out which user is using which company code?I can get the roles and users separately from two different SAP tables.
    Is it possible to get it from a single table or Tcode?
    Best Regards,
    Rahman

    Hi,
    Thanks for the update.Yes I tried with SUIM.But I was unable to find any clue.
    Regards,
    Rahman

  • How to map company code for customer master in CRM

    Dear CRM Experts,
    The scenario is ,Customer Master is created in SAP CRM 6.0 and it flows to ECC 6.0 . After replicating the data to ecc i am manually assinging company code to customer master.Is there any option to map company code to crm customer master level.
    Regards
    Ashwin

    Dear All,
    The above requirement was address by Development.

  • How to Mapping of company code to the billing units

    Hi,
    Please help me how to Mapping of company code to the billing units , iam doing the rollout project.
    Thanks
    Mustafa

    Hi Mustafa,
    External billing (A): Billing is controlled in the R/3 System.
    The company code is determined by the accounting adapter which calls
    the R3 system. You define the company code to be transferred in
    Customizing under:
    Customer Relationship Management
    Master Data
    Organizational Management
    Cross-System Assignment of Organizational Units
    Assign Company Codes and Business Places to Billing Units or
    Assign Company Codes to Billing Units.
    Also you can check attached note 717476 for further information.
    Cheers,
    Brian.

  • How to stop the Company Code popup window in MIRO!

    Hi,
    When User logs in the system and enters into the MIRO transaction, he is asked to enter the Company Code first in order to proceed further. I know that once you enter the company code then the system does not ask it to enter again during that login, however, it will asks again whenever User login the system again!
    Can someone tell that how to stop this Company Code popup window in MIRO, so that the system should not ask for the Comp Code whenever User logs in and enters into MIRO? I think there are some entries maintained in the User Master for this!
    Thanks.

    Hi,
    It is Necessary for the user to enter the company code for which he need to process the Invoice.
    First think is if the user knows ,that he is only going to do for one company code.then
    in the T code SU3.
    In the parameter TAB
    you can make the Default value for the parameter ID BUK as your Comany Code value ( Eg 1000)
    so that when ever the user does the MIRO ,it comes with that company code only.
    and if he want to do for another comapany code ,he has to use the option of Switching the comapny code.
    so this is user dependent and has to be made for all users.
    Note .the above setting works only you have entered saved and logged off and log in again.
    also ,this value gets defaulted you all the comapny codes in all screen.
    Hope so it helps.
    Regards
    Anjanna.

  • How to find out company code from a plant ?

    Hello friends,
    I have to modify a program that uses FM "BAPI_COMPANYCODE_GET_PERIOD".   For that, we have to export company code ID.  Currently it is hard coded with one company code.  Now we want to make this program usable by all company codes.  So instead of hard coding, I would like to dynamically find out company code based on the plant.   So I want to know - how to find out company code from a plant ?  Is there any table that has plant to company-code assignment data, or any other FM/BAPI to get this info ?
    Thanks,
    - Chetan

    hi
    u can find this from table T001K
    or just goto EC01
    here click on STRUCTURE>NAVIGATION
    double click on co code u will get the list
    u can slo try this in EC02
    regards
    kunal

  • How to setup a company code for material management

    Hi,
    While creating material in MM01, in sales org tab, when I gave plant XXXX, it is giving an error "Company code YYYY is not setup for material management".
    So can you help me , how to setup a company code for material management
    Help is appreciated
    thanks
    DIL

    Hello Sendil,
    You can maintain it with trns code OMSY or MMPI/MMPV.
    Hope this helps
    Regards
    Arif Mansuri

  • How to link ECC Company code with BCS Consolidation unit

    I have to create new consolidation unit in BCS, parallelly in SAP R/3 also I have created a company code.
    I could read following in the forum :-
    The Company Codes from ECC are assigned to the characteristic Company in BCS, thus creating a one to one relationship between ECC & BCS company codes.
    BUT HOW TO DO THE SAME.
    Also any advise on Profit centre and cost centre etc in BCS in line with ECC. This is first time I am configuring in BCS,

    Typically in ECC company codes are assigned to a company. The company is typically used for cons unit in BCS, but it is not uncommon for company code to be used as cons unit.
    When company code is used, it is an attribute of the characteristic company and thus in the load mapping, the company is mapped to the attribute company code. This results in company code being mapped to company.
    Otherwise, if company code is in the databasis as the cons unit role, then it is simply mapped to company code to company code.
    For profit center and cost center, these are typically assigned the role subassignment, but it is not uncommon for profit center to be a cons unit for a matrix consolidation. However, these characteristics must first be included in the totals/databasis infocube.

  • Error in F-02 : "No chart of accounts could be determined for Company Code

    Hi SAP GURUs,
    When we tried to post an Journal Entry it is giving the error message as "No chart of accounts could be determined for company code".
    Could you please help me with the reason & resolution for this.
    Best Regards,
    Pavan

    Dear,
    Please try tcode obd4, define a/c group with COA.
    hope it helps
    regards

  • How to determine which elements are queryable via Web Services QueryPage

    I am trying to query opportunities by associated opportunity product revenue records, but I continue to receive errors like "Unexpected text: = '9598015'".
    From reviewing the forums, it looks like this is when I am querying a field that is not defined to be queryable.
    Could someone please tell me how to determine which fields are queryable on a particular record type like this? I have tried using basic short text fields and indexed short text fields - but continue to receive the error message above.
    Thanks in advance.

    I found at least partial answers to my questions.
    MessageContext.getPropertyNames() can be used to see the properties on a given flow.
    MessageContext.getProperty(prop) can be used to get information for paroperties such as:
    prop=javax.xml.rpc.service.endpoint.address
    prop=wsdl.portName
    -- Frank

  • How to determine which chipset my Satellite L300/700 has?

    I have a SATELLITE L300/700 (PSLB8A-047004). The User Guide covers several models. It indicates that the chipset determines which memory modules I need for a memory upgrade. How do I find out which chipset I have, please?
    Kev.

    > I'm still curious about how to determine which chipset I have - any thoughts?
    Go to the device manger and click on IDE Ata/Atapi controllers:
    http://img814.imageshack.us/img814/7321/chipset.jpg
    There you will see your chipset installed on your laptop. In my case, as shown on the screenshot is Intel ICH9m

  • How CSSCAN determines which indexes need to be rebuild ?

    Hi everybody,
    i'm currently migrating 3 Oracle databases that contain CP1252 characters unproperly stored in WE8ISO8859P1 instances.
    The key steps of the migration are :
    1. ALTERing CHARACTERSET to WE8MSWIN1252
    2. changing CHARACTER SEMANTIC LENGTH for CHAR and VARCHAR2 columns
    3. truncating data stored in VARCHAR2(4000) columns
    2. Full export
    3. Full import in a ALL32UTF8 instance
    To do all of this (and especially the step 3), i use the CSSCAN utility (very practical !!!).
    And i have a question about CSSCAN: how CSSCAN determines which indexes need to be rebuild. What is the logic ?
    Looking at the CSSCAN report, i have a lot of cells/columns that are affected by the characterset migration, and i have just a few index to rebuild.
    Why would i like to understand the logic ? Because i would like to rebuild ONLY indexes that REALLY need to be rebuilt and i am not sure that all the indexes specified by CSSCAN really need to be rebuilt.
    Thanks for any information about that.
    (and sorry for my english)
    NB: i have managed "function-based indexes" specifically: i drop them before the export, and i recreate them after the import. So my question mostly target the "regular indexes"

    1. All indexes whose key contains at least one character column with convertible or exceptional data, excluding indexes with names equal to some constraint name for the same owner.
    plus
    2. All functional indexes on tables that have columns needing conversion, excluding indexes with names equal to some constraint name for the same owner.
    The condition regarding constraints does not seem to be very fortunate but it comes from times when the appropriate flag in index metadata was not yet available.
    But note that in your migration scenario, you do not actually have to care much about indexes. Step 1 & 2 do not need any modifications to the user data and hence to index contents. Step 3, if done through UPDATE, will modify affected indexes automatically. Step 4 does not affect the database. Step 5 will recreate all existing indexes anyway.
    -- Sergiusz

  • Company code ZG01 is not assigned to a fiELD status variant

    HI,
    I have created company called 'zg01'.
    when i try to create a GL ACCOUNT FOR this company using (FS00) i am getting the following error.
    Company code ZG01 is not assigned to a fiELD status variant.
    FOR YOUR INFORMATION I HAVE CREATED COA  and assign the same to the company ZG01.
    Please suggest....
    also suggest  how to i transport GL Accounts used by other companys of my system to my newly created company code : zg01.
    so that i can save creation of GL ACCOUNT.

    You have to maintain field status variant and assign it to your company code. This is required for GL master data.
    1. Define Field status variant in SPRO>Financial Acctg>Financial Acctg Global Settings>Document>Line Item>Controls>Define Field status variant. You create the field status variant and the field status group.
    2. Assign the Field Status group to your company code SPRO>Financial Acctg>Financial Acctg Global Settings>Document>Line Item>Controls>Assign Company Code to Field Status Variants
    Once you have defined this you will be able to assign field status group to your GL master data.
    The use of Field Status Group is to determine the required/displayed/optional fields during posting transactions.

  • Unique company code has not been assigned to company number

    Dear Experts,
    When I am posting the customer advance amount in FBCJ I am getting the below mentioned error.
    Unique company code has not been assigned to company number
    Message no. GLT0001
    Diagnosis
    Document breakdown is active in your system. In certain cases, a company code is derived from the company ID number, and this must lead to the assignment of a unique company code.
    A unique company code could not be assigned to company number .
    System Response
    You cannot carry out the required posting.
    Procedure
    Assign one company code to company number .
    Did I miss any config settings.
    Thanks in advance,
    Regards
    Aswin

    Hi,
    We faced the same issue and we managed to solve it thanks to SAP Support assistance. The system at the time of posting is looking for a value in the Field "Trading Partner" in the FBCJ Transaction code. That field is required because the item is like a Company Code clearing therefore if the field is not filled it cannot determine the Company code during posting.
    To solve this you have two approaches:
    To treat each Cash journal separately you need to Fill the Trading Partner field individually in the FBCJ with the respective value. Select the same Trading Partner as your original company code (even if you select other company code you cannot post Inter company through FBCJ).
    Go to FS01/FS02 of the particular account you face this issue and define a Trading Partner in the Type/Description Tab under Consolidation data in Chart of accounts. With this way the Trading Partner will apply for all postings concerning that particular GL Account and there will be no need for the first approach described above.
    I hope this helps.
    Regards,
    Athos Kyriakides

Maybe you are looking for