How to develop a Frame and add four panel in it.

Hi ,
Can any one send the source code for to develop a frame with four panels in it in NetWeaver developer studio.
Thanks,
Regards,
Ramana

Hi,
You have to change the framework page to achieve this.
Refer the link for more details
http://help.sap.com/saphelp_nw04s/helpdata/en/1c/0a3bcb9149453aab0132425c6f7cdf/frameset.htm

Similar Messages

How can i launch firefox AND adds-on (web of trust, http header with options for exemple) in commande line ?

How can i launch firefox AND adds-on (web of trust, http header with options for exemple) in commande line, on windows ?
firefoxe... -option? <addon name>?....?

Does opening this page help: <b>about:addons</b>
*https://developer.mozilla.org/en/Command_Line_Options

How to create a group and add class instances to that group using VSAE

how can i create a group in VSAE and add the objects to the group that too instances of a class.
should i use the ID of the object or some other rule to add members to that group
Thanks & Regards, Suresh Gaddam

Hi,
The below links should be helpful for you to create group in VSAE:
Computer and Instance Group Fragments in VSAE
http://blog.scomskills.com/create-a-computer-or-instance-group/
Create a Group of Health Service Watcher Objects Using VSAE
http://blog.scomskills.com/create-a-group-of-health-service-watcher-objects-using-vsae/
SCOM VSAE – Custom Dynamic Computer Groups Based On Server Registry Keys
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to create a control and add it to a page layput

I am reading the following link :-
http://www.itidea.nl/index.php/what-about-you-must-fill-out-all-required-properties-before-completing-this-action-when-publishing-a-page/
which says that i need to create a control and add it to a page layout. but can anyone help me in understanding how i can create a user control and add them to page layout ?
Thanks

> First problem i could not find a User Control (Farm Solution only) under the Office/SharePoint section
if you mean New item in Visual Studio, then check it under general Web category. User controls are basic ASP.Net functionalities, not Sharepoint-specific. If it is not there, you may use the following trick:
1. Create new project in other VS instance using "ASP.Net Empty Web Application" template
2. Add new user control there (in this project type it should exist for sure under Web category. Called "Web User Control")
3. Copy all user control's files to the folder of your Sharepoint project (ascx, ascx.cs, ascx.designer.cs)
4. In VS instance with Sharepoint project add existing items: all copied user control files. They should be grouped under ascx file automatically after that
> The type or namespace name 'TaxonomyFieldControl' could not be found (are you missing a using directive or an assembly reference?)"
you need to add reference to Microsoft.SharePoint.Taxonomy.dll assembly, which is located in the GAC (assume that you have installed Sharepoint on your dev env)
Blog - http://sadomovalex.blogspot.com
Dynamic CAML queries via C# - http://camlex.codeplex.com
thanks a lot for your help. so can i do the following steps:-
I follow these steps to deploy a user control.
using Visual Studio 2012 , i added a new Farm solution.
then inside the farm solution i added a new User Control(Farm Solution Only).
3. inside the user control i entered the following code:-
using Microsoft.SharePoint;
using Microsoft.SharePoint.Taxonomy;
using Microsoft.SharePoint.WebControls;
using System;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
namespace WikiPopUp.ControlTemplates.WikiPopUp
[ToolboxData("<{0}:CustomValidationRequiredFieldsOnPage runat=server></{0}:CustomValidationRequiredFieldsOnPage>")]
public class CustomValidationRequiredFieldsOnPage : WebControl
protected override void CreateChildControls()
base.CreateChildControls();
if (SPContext.Current.FormContext.FormMode == SPControlMode.Edit)
bool arethere = AreThereAnyMissingRequiredFieldsOnPage();
if (arethere)
//SPPageStateControl:
//Provides an ASP.NET control that handles the Ribbon buttons controlling the state of a Microsoft SharePoint Server wiki or publishing page,
//such as the CheckInCheckOutButton or the PublishingButton.
SPPageStateControl baseParentStateControl = Page.Items[typeof(SPPageStateControl)] as SPPageStateControl;
//Publish button: SPListItem MissingRequiredFields checks this.FieldHasValue(link.Name, field);
//the field is empty (which is right) when the page is first created (MMD field is never filled in)
//when the field was once filled, saved and emptied the field in sp code still has the previous value and the check MissingRequiredFields succeeds
//after succeeding this check the page is validated (this.Page.Validate()) and this one fails which results SP validating the page as the Save button does
if (baseParentStateControl.HasError)
//this overwrites the previous PageErrorState
//and validates the page
//no popup anymore and status updates in yellow area
baseParentStateControl.EnsureItemSavedIfEditMode(false);
else
//there are missing fields at this listitem, but they're not on the page
//do nothing here, because the SerializedErrorState contains the navigate url to the Edit Properties page
//and a message pops up
/// <summary>
/// Check if required fields are missing which are present at the page
/// </summary>
/// <returns></returns>
private static bool AreThereAnyMissingRequiredFieldsOnPage()
foreach (Control control in SPContext.Current.FormContext.FieldControlCollection)
//get the control type
string type = control.GetType().Name;
FieldTypes controlType = (FieldTypes)Enum.Parse(typeof(FieldTypes), type);
switch (controlType)
case FieldTypes.TaxonomyFieldControl:
TaxonomyFieldControl tfc = control as TaxonomyFieldControl;
if (!tfc.IsValid)
return true;
break;
default:
break;
return false;
enum FieldTypes
DateTimeField, FieldValue, TextField, RichImageField, NoteField, RichHtmlField, PublishingScheduleFieldControl, TaxonomyFieldControl, BooleanField, ComputedField
4. i add a reference for the Sharepoint.taxnomy
5. then i deploy the solution to my site collection. and now i can see the new solution inside the farm solution under central administration.
but not sure if these are all the required steps to register the user control or still i need to do extra steps ?

How to create a package and add a file?

Hi all,
I am new to Java and very much much confussed with how to create a package and then include some files any help will be very thankfull.
Thanks for your help
kka.

Steps for creating a package in java are as follows:
Choose a base directory for your classes. For example, you might choose c:\java\packages. Type the following command:
set CLASSPATH=%CLASSPATH%;c:\java\packages
Create subdirectories for each chapter or section, if you don't already have them.
For each of the classes in the subdirectories, add the following line to the very top of each file:
package directory-name;
where directory-name is the name of the subdirectory the class file is located in.
In other directories you may have class files that need to access one of the classes in another directory (package). To do this, write one of the following at the top of the class that needs the other class:
import subdir.*;
or
import subdir.classname;
Use the class by name in the new class file.
Note that you can create sub-packages by creating subdirectories of the original subdirectories, and inserting package statements at the top of the java files in those directories.
Hope this helps!

Easy Question How to create Basic Groups and add respective Users

Please help. I need to know how to create a basic group and later add users to the group. The group name would be callled Hardware and I will add johnsmith and janedoe to the group. Should I concern myself with the group id for whatever reason? I think the command is somthing like groupadd. Do I do somthing like:
# groupadd Hardware
# useradd -G Hardware johnsmith
# useradd -G Hardware janedoe
I'm using Solaris 10 if that helps.
A million thanks I very New2Solaris,
Johnny Mac

Ok here is what I found on the net:
change a user's group information change a user's primary group membership:
usermod -g Hardware johnsmith
usermod -g Hardware janedoe
I forgot to mention that these are existing accounts (sorry)
In order to change user's supplemental group membership:
usermod -G Hardware johnsmith
usermod -G Hardware janedoe
is the supplemental group simply adding them to another group and not changing there primary group, which by default I think is staff. I would like to keep them in staff and add them to another group, in this case Hardware.
Anyones thougths?

How do I go back and add a new e-mail address to my Envy printer

I wanted my son to be able to send pics to my printer. I added my e-mail but can't find how to go back and add anyone else.
This question was solved.
View Solution.

Hi,
Please
(a) Logon to your HP Connected account,
(b) Click Devices tab,
(c) Click your printer,
(d) Click Manage Allowed Senders
You can add more email address(es) from there.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to develop an android firefox add ons ? Is it same as developing a desktop firefox add ons? .xpi

How to develop android firefox add ons? Where i can launch my app using this add ons.This add ons show a button-like on the page that launch my android app if clicked.

thank you for your answer.
but do you think that firefox is a good browser to develop add ons for it?
I mean what about google chrome? Is it better?
Again, can i develop add ons that creates a button in the page to launch my android app.

Have TorBrowserBundle running Firefox ESR10.0.12 on Mac OS X10.8.2 after browser update how to migrate settings , preferences and add-ons?

Updated TorBrowserBundle and none of my settings, bookmarks,preferences,and add-ons were migrated to the new version. Have you had trouble with this before? I did not replace my older version, so can I migrate these settings and add-ons like is possible with the bookmarks HTML file export?

We are currently running 10.8.5 with Workgroup manager 10.8 and Server App 2.2.5
My question is, would there be any modifications i would need to make to your instructions for them to work on the above os and app version?

How to delete bank information and add a new one

as an ios develper i need to edit banking and tax. it doesnt give edit option , only the view option and i need to delete the bank information and add new one .

If you can't change the required information in the Member Center, contact [email protected] see if they can help, etc.

How to develop a drag-and-drop feature in JSF

Can someone give me some hints about how to add a drag-and-drop featurn on a HTML page developed in JSF?
For example, on Google personalized page, you can drag-and-drop some components and change their position easily. Can JSF do that, or even better?
Any idea and help is appreaciated!

You're looking for a portal software, with built in AJAX functionality...I'd love that kind of portal software as well.....you might want to look at Sun's portal software.
Regards
Haroon

How to create a site and add security groups through code: scripts, csom, ... ?

Hi,
I'm new to CSOM and are looking for a way to create sites in SharePoint Office365 and especially add user to it with a specific role eg. 'visitor' or 'owner'.
I use this code to add sites from a csv file, so far so good.
But now I want to add security groups based on the csv file and assign a role. The security groups allready exists.
and also how to add a user with a 'owner' role for some sites.
That would make my life easier :-)
so thank you in advance!
# load assemblies
#[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Client")
#[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Client.Runtime")
Add-Type -Path "c:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\ISAPI\Microsoft.SharePoint.Client.dll"
Add-Type -Path "c:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\ISAPI\Microsoft.SharePoint.Client.Runtime.dll"
# site collection
$siteUrl = “https://mysharepoint.com”
# admin
$username = "[email protected]"
$password = Read-Host -Prompt "Enter password" -AsSecureString
# get clientcontext as object
$ctx = New-Object Microsoft.SharePoint.Client.ClientContext($siteUrl)
# assign credentials to clientcontext object
$credentials = New-Object Microsoft.SharePoint.Client.SharePointOnlineCredentials($username, $password)
$ctx.Credentials = $credentials
# create site from template 'teamsite' => STS#0
$data = Import-Csv "c:\tools\CSOM\vakwerking_test.csv"
foreach ($row in $data) {
$webCreationInformation = New-Object Microsoft.SharePoint.Client.WebCreationInformation
$webCreationInformation.Url = $row.vakwerkingurl
$webCreationInformation.Title = $row.vakwerkingnaam
$webCreationInformation.WebTemplate = "STS#0"
$webCreationInformation.UseSamePermissionsAsParentSite = $false
$newWeb = $ctx.Web.Webs.Add($webCreationInformation)
Write-Host "Title" $newWeb.Title
#send to sharepoint
$ctx.Load($newWeb)
$ctx.ExecuteQuery()

Hi,
The command above about creating a group only works for the root site of the site collection, because the scope of the user group is site collection level, these groups
can be used in all the sites in this site collection.
With the existing groups in the root site, we can add users into them and grant specific permissions of a specific sub site to these groups.
Here is a demo about how to assign permission to a group using Client Object Model(though in C#) for your reference:
http://www.c-sharpcorner.com/UploadFile/54db21/set-permission-to-group-in-sharepoint-2010-programmatically/
Best regards,
Patrick
Patrick Liang
TechNet Community Support

How to develop a tool to add my text automatically in the desired location in a pdf document

I am trying to create an action in pdf just similar to "File name stamper" . Here I need to enter a text and save. and that saved text to be inserted in the desired loction in my document.Manually entering text is time consuming. I want this to be automated. How to go about it.
Kindly help

This can be done in many ways. The simplest is using a script that adds a watermark/form field/annotation with the text.

How to duplicate a target and add resources in xcode using command line?

I am trying to use command line tools to create, add resources, build, archive and export to ipa in xcode. I could do the Build, Archive and Exporting to IPA through the command line tools(xcodebuild). But I also wanted to duplicate the target in the same project,add a new Info.plist to the duplicated target resource through command line itself. How to do it? I could not find any valuable answers by Googling. I could not find any proper documentation also in Apple Sites.
Is there any tools that can be used to perform these? I don't want to use the UI. Please, help me out.

The Mac App Store is not appropriate for command line tools. You can use any language you want.

How to display an image and add axis labels

Hey everyone,
I just had a really quick question on a program I created. It uses the vision module to open a file in a new display window, and I would like to add axis to the image simlilar to the picture below (With both the x and y axis labels as pixel, and a cursor which displays the pixel value or intensity). I have attached the simple program, as well as an example of the type of image I would like to open. Thank you for the help! =]
Attachments:
TEST1.zip ‏2223 KB

I've updated the open_img.vi file so that it works with the generic sample picture provided, but the program does not work with the image within the ZIP file from the previous post.
Or if anyone has any other ideas how to add axis labels to an image, I am by all means open to suggestion. Thanks
Attachments:
open_img.vi ‏47 KB
Water lilies.jpg ‏82 KB

How to develop a Frame and add four panel in it.

Similar Messages

Maybe you are looking for