How to develop a popup window in Oracle BPM WorkSpace?

Hi,
Normally, after developing and deploying an application in OBPM, we can see that particular application in the left hand side of the Oracel BPM Work Space web page. On clicking the respective application, it will start working after logging with appropriate user.
My Question: On login with appropriate user, can i get a popup of that particular application and prompt me for inputs without clicking that link? if so how?
regards,
Srinivas.

Hi,
You can either use the approach above, which is having an Attribute, type IWDWindow in B's Component Context. When you open the popup you store the reference. When you click close you get that reference back and destroy the window.
Note, I'd suggest you to have your "View" with no Close Button. Then in Component A you create another View that has an UIViewContainer with your Popup View. You can code the Close code in Component A.
This way you can do the same and have a code in Component B to close your window.
Other way would be having it as a Component variable and using the Component Interface on A (create a Method) that goes to Component A and destroy that instance.
Regards,
Daniel

Similar Messages

How to close a popup window for system events?

Hi,
I have a screen 110 which shows several input field in popup mode.
The Cancel button can close the screen.
But my question is how to close the popup window for the following system events?
1, Customer clicks the cross button in top-right corner
2, Customer clicks the system icon in top-left corner and then select either: "Close" or "Stop Session"
The PAI subroutine of the screen has not been triggered for the above system events.
Thanks for the coming help.
Best Regards,
David

Hi Siddharth,
I did check with another very experienced ABAP developer.
The solution was the same as what Arunima Rudra provided.
And I got a sample program which did work properly.
The headache is that the system events in my program still cannot be triggered even after I have all the same changes.
Anyway, I suggest you to try the solution as provided by Arunima Rudra.
It should work for 2 system events:
1, Customer clicks the cross button in top-right corner
2, Customer clicks the system icon in top-left corner and then select either: "Close"
For "Stop Session", it should not be handled by popup.
You can observe the same behavior in ALV sorting configuration popup.
Good luck!
Regards,
David

How to create a popup window to load HTML page in AIR application without using any mx or spark?

How to create a popup window to load HTML page in AIR application without using any mx or spark components?
I need to load the HTML page in popup in AIR application without using any of the <mx> or <spark> components. I need to open in the application itself not in the browser.(If we use navigateToURL() it will open in th browser)

Can we achieve this? can somebody help me on this scenario..

How to create a popup window that shows detail information when press submi

hi,all
how to create a popup window that shows detail information when press the submit button ?I mean,when I press the button "Sumit"there will appear a popup window that shows the detail information you typed before.it means are u sure to submit,it is like some confirmation window.
how to do achieve this ?help plz .
best regards
hlee
Edited by: hlee on 2011-4-15 上午1:26

hey,vee
thanks for your response,but i had already read this thread before i put up a new question.any way,thanks.
best regards
hlee

How to display a popup window (DialogMessage) via code behind c#?

hi all,
How to display a popup window (DialogMessage) via code behind c#?
I use sp 2013, in else case I want show the DialogMessage:
if(condition)
else
HttpContext.Current.Response.Redirect(SPContext.Current.Web.Url+"/_layouts/TestError/ErrorDueDate.aspx");
the above Redirect work good but I want show the error in a DialogMessage its better because of Usability and not redirect the user to new page...
if not via code behind is there a better way to do it?
thanks in advance
Ahmad
SP 2013 & SPD 2013 & VS 2013 & MSSQL 2012

thanks for you answer,
And yes I includ them via CDN, like below:
<script
type="text/javascript"
src="http://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.min.js"></script>
<script
src="http://ajax.aspnetcdn.com/ajax/jquery.ui/1.8.9/jquery-ui.js"
type="text/javascript"></script>
<link
href="http://ajax.aspnetcdn.com/ajax/jquery.ui/1.8.9/themes/start/jquery-ui.css"
rel="stylesheet" type="text/css"
/>
But I get still the above error in my previes post.
SP 2013 & SPD 2013 & VS 2013 & MSSQL 2012

How can I allow popup window within secured site?

How can I allow popup window wlthin NWA People.com(secured site)？
Ｉneed to see Access.

You can allow pop-ups in Safari via Settings > Safari > Block Pop-Ups set 'off'

How to read Extended user property in oracle BPM?

Hi,
I have tried using the XPATH expression in Data Association to read an Extended User Property defined in Oracle BPM Workspace. Actually I'm using Active Directory for authentication, and as there is limitations for modifying existing AD to accommodate custom fields required for BPM Processes, I created an Extended User Property called Department Code and mapped it for all users who should be participating in the process. Now I want to read this Department Code and display in ADF Form (Human Task Form).
I tried something like this using XPATH Expr. in Data Association for Human Task :
ids:getUserProperty(bpmn:getProcessInstanceAttribute('creator'), 'departmentCode')
But it appears that using Identity Function exposed for Xpath we can only read some pre-defined set of properties associated with internal LDAP for weblogic. So please suggest what is the approach one should follow in order to read Extended User Properties defined in Oracle BPM Workspace.
I'm using Oracle SOA 12.1.3 and JDeveloper 11.1.17 deployed on Windows 7
Regards,
Shoaib R Khan

Hi,
I have tried using the XPATH expression in Data Association to read an Extended User Property defined in Oracle BPM Workspace. Actually I'm using Active Directory for authentication, and as there is limitations for modifying existing AD to accommodate custom fields required for BPM Processes, I created an Extended User Property called Department Code and mapped it for all users who should be participating in the process. Now I want to read this Department Code and display in ADF Form (Human Task Form).
I tried something like this using XPATH Expr. in Data Association for Human Task :
ids:getUserProperty(bpmn:getProcessInstanceAttribute('creator'), 'departmentCode')
But it appears that using Identity Function exposed for Xpath we can only read some pre-defined set of properties associated with internal LDAP for weblogic. So please suggest what is the approach one should follow in order to read Extended User Properties defined in Oracle BPM Workspace.
I'm using Oracle SOA 12.1.3 and JDeveloper 11.1.17 deployed on Windows 7
Regards,
Shoaib R Khan

How to get the papi wsdl of Oracle BPM Studio

How to get the papi wsdl of Oracle BPM Studio. What is the url of the papi wsdl of Oracle BPM Studio

Thanks to Lovin:
There is an icon in the studio when the engine starts.. called as "Launch Deployed Webservice webapp"
Also.. Need to go to Engine Preferences -> Engine -> Advanced Tab -> Startup and select Start PAPI Web Services.
Default URL:http://localhost:8585/papiws/PapiWebServiceEndpoint?wsdl

How to display workitems values with Hyperlink in Oracle BPM workspace

Hi,
In Oracle BPM workspace , is there any way to display hyperlinks for work items i,e., I want to give a hyperlink to the values displayed in the default columns under the work items. So that if user clicks any hyperlink , a new information window will be displayed.
Thanks
Bharath.

Hi,
If you create a derived table and pull the objects i guess it should work. Other wise this error will throw up.
There are some ideas to resolve this here, but not sure it will work - Error trying to modify SQL in Data Provider
Arun

Can't Start Oracle BPM Workspace

I'm trying to start oracle BPM workspace through this URI http://localhost:7001/bpm/workspace but it gives me an error which is:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
*10.4.5 404 Not Found*
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
If anyone know about that,please help me.I can't complete my semester project_
Note: it works when I try to start the following URIs:
http://localhost:7001/console/login/LoginForm.jsp
http://localhost:7001/em

Most likely you didn't check the 'Oracle BPM Suite'/'Oracle BPM Suite for developers' when you configured the SOA domain. Go to '<YOUR_MIDDLEWARE_HOME>\Oracle_SOA1\common\bin\' and run the config.cmd.
Choose 'Extend an existing Web Logic Domain' and then be sure to select 'Oracle BPM Suite'/'Oracle BPM Suite for developer'. Then it should work.
Good luck,
Mihai

Error during addition of external link to oracle BPM workspace

Hi All,
I just want to add an external link to oracle BPM workspace and I've followed this tutorial :
http://docs.oracle.com/cd/E28280_01/user.1111/e15175/bpmug_ext_apps.htm
but I am neither able to view the required, nor getting any error.
During deployment time I'm only getting this message :
Issues were encountered while parsing this deployment to determine module type. Assuming this is a library deployment.
I'm using the virtual m/c version : oel5u5-64bit-soabpm-11gr1-ps4-fp-Workshop-Exp_2
Please help me to resolve the issue.
Thanks in advance.

What I meant to say is check the logs at the time you are getting the error since sometimes the logs can be huge in size

How can we modify the Task Priority in BPM workspace???

How can we modify the Task Priority in BPM workspace??? Is it possible?? If so what is the best and easy way to implement this??

Hi Chandra,
First please find the job name in SM37 for FIGL and check the job status to be in "released" status. Select that job and go to job menu and click on change. then it will take you to the job screen where you have "job class". Here you can change the job class to "A" to get to high priority.
If you are unable to edit the job then create a new job with the same variants by clicking STEP button in the Job screen.
Try these steps, let me know if are able to do so.
Regards,
Ravi Kanth

How to create a popup windows

Hi
I have seen in Simon Collins application http://apex.oracle.com/pls/apex/f?p=20411:1:888811517916461 a popup windows.
Can anyone help me, buil a popup windows like that or is there any tutorial where i can see how its done.
Tanks

Hi,
You should have three processes: addPerson, getPerson and updatePerson. All three are "On Demand" processes. This is the PL/SQL code for each:
addPerson
BEGIN
INSERT INTO EMP (ENAME, JOB, MGR, HIREDATE, SAL, COMM)
VALUES (:P1_ENAME, :P1_JOB, :P1_MGR, TO_DATE(:P1_HIREDATE, 'DD/MM/YYYY'), :P1_SAL, :P1_COMM);
END;getPerson
DECLARE
vRESULT VARCHAR2(1000);
BEGIN
SELECT ENAME || ',' || JOB || ',' || MGR || ',' || TO_CHAR(HIREDATE, 'DD/MM/YYYY') || ',' || SAL || ',' || COMM
INTO vRESULT
FROM EMP
WHERE EMPNO = :P1_EMPNO;
HTP.P(vRESULT);
END;updatePerson
BEGIN
UPDATE EMP
SET ENAME = :P1_ENAME,
JOB = :P1_JOB,
MGR = :P1_MGR,
HIREDATE = TO_DATE(:P1_HIREDATE, 'DD/MM/YYYY'),
SAL = :P1_SAL,
COMM = :P1_COMM
WHERE EMPNO = :P1_EMPNO;
END;On the page, in the page's HTML Header setting, I have:
<script type="text/javascript">
$(function() {
   $('#ModalForm').dialog(
    modal : true,
    autoOpen : false,
    buttons : {
      Cancel : function() {
        closeForm();
      Add : function() {
        $('#ModalForm input[type="text"]').removeClass('ui-state-error');
         var valid = true;
        $('#ModalForm input[type="text"]').each(function() {
          if($(this).val().length == 0)
            $(this).addClass('ui-state-error');
            message = 'Error: ' + $(this).attr('id').substr(3).replace('_', ' ') + ' is blank';
            $('.msg').text(message);
            valid = false;
            return false;
        if(valid)
           addPerson();
function openForm(pID)
   $('#ModalForm').dialog('open');
   $('#ModalForm input[type="text"]').removeClass('ui-state-error');
   var btns = {};
   btns['Cancel'] = function() { closeForm() };
   $s('P1_ENAME','');
   $s('P1_JOB','');
   $s('P1_MGR','');
   $s('P1_HIREDATE','');
   $s('P1_SAL','');
   $s('P1_COMM','');
   if(pID)
      initilizeForm(pID);
      $('#ModalForm').dialog({ title : 'Update'});
      btns['Save Changes'] = function(){updatePerson(pID);};
   else
      $('#ModalForm').dialog({ title : 'Add'});
      btns['Add'] = function(){addPerson();};
   $('#ModalForm').dialog('option', 'buttons', btns);
function closeForm()
$('#ModalForm input[type="text"]').val('');
$('#ModalForm input[type="text"]').removeClass('ui-state-error');
$('#ModalForm').dialog('close');
function initilizeForm(pID)
   var ajaxRequest = new htmldb_Get(null, &APP_ID., 'APPLICATION_PROCESS=getPerson', 0);
   ajaxRequest.add('P1_EMPNO', pID);
   var ajaxResult = ajaxRequest.get().split(',');
   $s('P1_ENAME', ajaxResult[0]);
   $s('P1_JOB', ajaxResult[1]);
   $s('P1_MGR', ajaxResult[2]);
   $s('P1_HIREDATE', ajaxResult[3]);
   $s('P1_SAL', ajaxResult[4]);
   $s('P1_COMM', ajaxResult[5]);
function addPerson(pID)
   if (pID)
     updatePerson(pID);
   else
     var ajaxRequest = new htmldb_Get(null, &APP_ID., 'APPLICATION_PROCESS=addPerson', 0);
     ajaxRequest.add('P1_ENAME', $v('P1_ENAME'));
     ajaxRequest.add('P1_JOB', $v('P1_JOB'));
     ajaxRequest.add('P1_MGR', $v('P1_MGR'));
     ajaxRequest.add('P1_HIREDATE', $v('P1_HIREDATE'));
     ajaxRequest.add('P1_SAL', $v('P1_SAL'));
     ajaxRequest.add('P1_COMM', $v('P1_COMM'));
     ajaxRequest.get();
     ajaxRequest = null;
     closeForm();
     gReport.search('SEARCH');
function updatePerson(pID)
   if(!valid())
      return;
   var ajaxRequest = new htmldb_Get(null, &APP_ID., 'APPLICATION_PROCESS=updatePerson', 0);
   ajaxRequest.add('P1_EMPNO', $v('P1_EMPNO'));
   ajaxRequest.add('P1_ENAME', $v('P1_ENAME'));
   ajaxRequest.add('P1_JOB', $v('P1_JOB'));
   ajaxRequest.add('P1_MGR', $v('P1_MGR'));
   ajaxRequest.add('P1_HIREDATE', $v('P1_HIREDATE'));
   ajaxRequest.add('P1_SAL', $v('P1_SAL'));
   ajaxRequest.add('P1_COMM', $v('P1_COMM'));
   ajaxRequest.get();
   ajaxRequest = null;
   closeForm();
   gReport.search('SEARCH');
function valid()
   $('#ModalForm input[type="text"]').removeClass('ui-state-error');
   var valid = true;
   $('#ModalForm input[type="text"]').each( function() {
       if( $(this).val().length == 0)
           $(this).addClass('ui-state-error');
           message = 'Error: ' + $(this).attr('id').substr(3).replace('_', ' ') + ' is blank';
           $('.msg').text( message );
           valid = false;
           return false;
   return valid;
</script>And I have an HTML region on the page with the following settings:
Region Header:
<div id="ModalForm" style="display:none; width:500px;">Region Footer:
</div>This region contains all of the page items - P1_EMPNO (hidden), P1_ENAME (text), P1_JOB (text), P1_MGR (select list), P1_HIREDATE (datepicker), P1_SAL (text) and P1_COMM (text)
Apart from a bit of styling here and there, that's it
Andy

How to get current PopUp Window

Dear All,
I am using NetWeaver 7.1 sp1 and facing a problem. Actually I want to show a view in popup window. The popup window works fine but i want to get currently popup window. How can i get it in View and controller ??
I found a solution : wdContext.currentPopupElement().getWindowInstacnce();
but in wdContext there is no method like .currentPopupElement(). plz help.

Hi
wdContext.currentPopupElement().getWindowInstacnce();
Here PopupElement is a attribute of IWDWindow type where u have to put the window instances (say For close or life control of that popup)
For further plz go through these doc
1. [Dialog|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/903fed0d-7be4-2a10-cd96-9136707374e1&overridelayout=true]
2. [Popup Window|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a04870c5-749b-2b10-06ba-d25515ef39e3&overridelayout=true]
Best Regards
Satish Kumar

How to create large message window in Oracle Applications.

Hi there,
I would like to display a window in Oracle Applications very similar to the window we see when we go to Help-> About Oracle Applications.
Basically I need a window that can display quite a bit of text (hence with a scroll bar) that I can call from custom.pll
I tried using fnd_message.set_string but this cuts off the message if it is too long.
Does anyone know how to do this.
TIA.
Ash.

Hi Sandeep.
Thank you so much for the idea...i am trying to do this but have run into a problem when closing the form.
I have created a new form from template.fmb, with one window with just one field to display the message and one 'ok' button (that will close the form).
I am now calling this form from within a trigger in CUSTOM.pll.
Basically, when a user clicks on the quanitity field on a purchase order line, i want this message to pop up depending on the item they have selected.
I have used the 'WHEN-NEW-ITEM-INSTANCE' trigger on the quantity field. Once the conditions validates to true, the message pops up... but when I try to close the form (clicking the OK button), it seems like it pops up again as it returns control back to the quantity field and then the trigger kicks in again?
Any ideas as to how I can resolve this.
Thanks.
Ash.

How to develop a popup window in Oracle BPM WorkSpace?

Similar Messages

Maybe you are looking for