How to disable Backupnow EZ "a new version of software is available" update message on system bootup

Hi.  I just purchased a new Toshiba portable drive and installed the Backupnow EZ software with it.  The software works fine and does just what I want it to do (backup my data).  However, every time I boot up my PC I get a message in the taskbar of "a new version of Backupnow EZ software is available, click here to update).  When I click, it takes me to the manufacturer's website, which requires that I PURCHASE the updated version.  I do not want to do this, as I JUST purchased the drive/software and it works fine for what I need it to do.  How do I disable that annoying update message though?
Any ideas will be appreciated.

I would dump that NTI program. In my opinion, several other free ones are better. Check these out.
   Backup & Recovery Free by Paragon
   Todo Backup Free by EaseUS
   Macrium Reflect Free
   AOMEI Backupper
   DriveImage XML
But don't be surprised if you get a nag screen from time to time. That's the price of free software.
-Jerry

Similar Messages

  • HT1349 How do I resolve issue of new version of itunes not installing? I get an error messagge when software is trying to install?

    How do I resolve issue of new version of itunes software not installing on my computer? I get error message when I start the install..

    Do you have the correct system requirements to download the latest version of iTunes:
    Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, or 32-bit editions of Windows 7
    or
    Mac OS X version 10.5 or later

  • How to disable trace files in oracle version 11g

    Senario : trace file are growing
    How to disable trace files in oracle version 11g
    pls guide with best practice

    SHANOJ wrote:
    Senario : trace file are growing
    How to disable trace files in oracle version 11g
    pls guide with best practiceIn 11g, there is an extensive tracing that happens for the reasons best known to Oracle only. But if you want to disable it, Coskan had published a small post mentioning an undocumented parameter(which means you must think twice before using it) to disable it- disablehealth_check* . You may want to read the complete post here,
    http://coskan.wordpress.com/2009/06/03/too-many-trace_file-on-11g/
    Aman....

  • How to use track effects with new version of GarageBand

    In the version of GarageBand before this one, you could access different effects that you could manage and apply to the different tracks.  Each track had an area containing its set of effects that were either activated or deactivated.  With this removed, i am not sure how to add those same kind of effects.  I am aware of the new nobs that are provided in order to mix and edit trebles, bass, mid, etc., but i want to be able to add different effects such as voice transformer, flanger, chorus, speech enhancer, bit crusher, bass amp, track echo, track reverb, amplifier, etc.  I desperately need help finding out how to do this, as this was a major part of my mixing and producing with GarageBand, and without these given effects, i do not feel as comfortable using GarageBand.

    zachseiden wrote:
    How to use track effects with new version of GarageBand
    this may help:
    http://www.bulletsandbones.com/GB/GBFAQ.html#replacemissingtrackeffectsgbv10
    This FAQ entry offers a Minute GarageBand video tutorial
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How can I avoid the "iOS new version" popup

    Hi
    My company uses iPads in Kiosk mode (Kiosk Pro App) for customers to browse some dedicated web content. The user should not be able to leave this Kiosk App. This is achieved using a special Kiosk case that covers the home button of the iPad.
    Our problem now is, that every time a new version of iOS is available, a popup similar to this one is displayed:
    When the customer clicks on "Details" he gets into the settings app, where he isn't supposed to go.
    Is there any way of disabling these popups?
    e.g. block access to apple update servers on wifi router? I would need the specific hostnames. Or maybe any new feature of iOS 6 that would help?
    Thanks a lot

    In IE Options > Advanced there is a setting Allow active content to run in local files. If that is ticked you will not get the warning. However that applies to all active content, not just your help. Are the users in your company or are they external users? If the latter, you cannot control their settings.
    Another option would be to use Multiscreen HTML5 but that would change all the calls to your help. That output can run locally or from a  web server.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • HT4623 I do not have a Software update box on my iPad 2....how do I download a newer version of software?

    I do NOT have a software update box on my ipad2....how do I get a newer version of software?

    The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • TS1717 Running Vista on old HP computer.  New version of iTunes was available to download so I did.  Now iTunes won't start and says it is missing MSVCR80.dll file.  Any helpful information on how to fix this will be appreciated.  Have uninstalled and ins

    Got advised that a new version of iTunes was available for my HP PC running Vista.  Upon downloading, wouldn't launch.  Uninstalled and reinstalled.  Wouldn't launch.  Both error messages said that a file named MSVCR80.dll was missing.  Any help in correcting this problem would be greatly appreciated.  Thanks.

    I also posted this question and then Googled it.  The instruction was to delete, in order iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, Apple Application Support and iCloud.   Uninstall worked for all but apple Mobile Dvice Support and i Cloud.  However, when I reloaded iTunes, it worked fine.  I hope this is helpful. RobinVista

  • TS3212 I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message "Service 'Apple Mobile Device' failed to start, verify that you have sufficient Privileges to start

    I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message “Service ’Apple Mobile Device’ failed to start, verify that you have sufficient Privileges to start system Services”
    On pressing retry I got the same message.
    On pressing Ignore, I got the message “ITunes was not installed correctly, please reinstall ITunes – Error 7 – (windows error 126)
    I reinstalled with the same error messages and the same results.
    I uninstalled existing and reinstalled from scratch and the same error messages again.
    I try to repair and at the end it said it had installed correctly – but when it tried to start I got the message “This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem” I now get the same message when I first start the computer but when I press ok I receive ““ITunes was not installed correctly; please reinstall ITunes – Error 7 – (windows error 126)” again.
    It appears the update has not only corrupted the operating system (Xp Pro SP3) of my computer but I have no backups to my IPhone, my wife’s IPhone or the three others phones that use my computer.
    I hope you can advise me how to recover my backups

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • ITunes says a newer version of software (4.3.3) is available.  However, when I download it it gives me an error message after the download is complete.  Any solutions?

    When I sync my iPhone 4 with iTunes it says that a newer version of software (4.3.3) is available.  However, after it appears to download the software I get an error message that the server timed out.  What's happening?

    This is asked and answered here many times each day.  You can do a forum search ( right side of this page).
    Disable your firewall/security software and try again.

  • How to get and install the new MSI Bluetooth Software Package 1.4.3.3.

    How to get and install the new MSI Bluetooth Software Package 1.4.3.3.
    This little FAQ will only cover the new version of MSI Bluetooth Software Package.
    First thing too do is unistall any older version of the MSI Bluetooth Software.
    Do this through the Add/Remove program applet in your control panel.
    There seams too be only through Live update you could get the new version of MSI Bluetooth Software Package.
    If you can't see any enter for MSI Bluetooth Software in the Live driver section of Live update then you have too enter the following too your registry.
    Create following code in Notepad and save it as MSILD.reg, then run the file.
    ;-->Code start
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\MSI\Drivers\MSI Bluetooth Software]
    "DrvSetup"="1"
    "Version"="1.4.2.10"
    ;-->Code end
    Rerun the Live update and hopefully you will now see a entry for MSI Bluetooth Software in Live driver section.
    Install the new version of MSI Bluetooth Software and reboot your computer. Even if the setup program doesnt told you too doit.
    After rebooting the computer you will see the Bluetooth icon in the taskbar. If it's Red then try too start the Bluetooth services by right click on the try icon and the only alternetiv there is.
    If the Bluetooth services is asking for a valid licens.dat then you should do the following.
    Surf to Jon's Bluetooth guide http://www.jonsguides.com./bluetooth/prepare.html and download the patcher from the link there.
    Unzip the the patcher and then run the BTWPatcher.exe program.
    Now the Bluetooth services will start and you will bee able too configure your own settings for the Bluetooth services.
    If nothing of this work you could try the complete Bluetooth solution at Jon's gudie and install the IBM version of the same program. I havent test this solution and will not do soo.

    I have the MS-6968 device and i want to use driver 1.4.x or 3.0.x. I found the driver 1.4.2.10 but i cannot find any WIDCOMMSecurity code.
    So, can anyone give me a link for BTWPatcher.exe???
    It cannot be found here (Jon's Bluetooth ) anymore.
    Thanks

  • New version of Software Packager?

    Our Company is Oracle Partner and we use Oracle Software Packager for deploying our application to our customers. It's been a while since Oracle released an update for it.
    Does Oracle plan to release a new Version of Software Packager which supports products.xml or will Oracle release a new toolset for creating installation sets in the new .xml format?
    Maybe the tools you internally use for creating your installation sets? Or does Oracle create everything by hand?
    Thanks for your reply,
    Regards Daniel

    Trust me i have read every document on metalink concerning OSP more then once...
    "Any question or problem with this product from non members of Oracle Partners
    should be posted in the OTN forums."
    If this are not the OTN forums tell me where to find them please.
    (Ignoring the fact the we are oracle partners.)
    I didn't criticize the support itself, it's the philosophy how oracle tries to let some products die silently, more or less ignoring the fact that they have customers which use them.
    This isn't the first time/product we have to deal with that...
    Regards Daniel

  • A new version of iConcertCal is available!

    I received an update alert for iTunes 8.11 and when I did clic ok this other pop window saying " A new version of iConcertCal is available!"
    The iTunes does not work now and the beach ball keeps spinning I go to force Quit and it shows iTune not responding.
    I deleted and deleted iTunes installed it and nothing it just keep generating a report, relaunch or quit!
    What is going on can someone tell me, Please. I want to sync my iPhone and weekly TV shows.
    Thanks,
    hank

    Pjorosco! thank you for your help! it work fine. allthough I did that before and didn't work. I went to apple programs dowloads and they had remove the iConcertCal from their site, so thats when I got concern and posted the topic. How ever I knew that it was a matter of time before someone will come up with the solution. You were that someone. Thanks!

  • While updating new version of software internet stoped working and now it will not reconise my ipod and it stays on one screen with the apple sign and a bar running horrizontle underneath

    while downloading a new version of software the internet dropped out and now itunes Wont reconise my ipod and on the ipods screen their is the apple sign and a load bar running horizontaly can someone help me

    - First try resetting your iPod.  Than may make the iPod visible in iTunes o you can restore it.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next see if placing the iPod in recovery mode will make it visable.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Lastly see if DFU mode will make it visible.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • HT1222 I am using old iphone 3G with capacity of 8GB memory, when ever I try to download  any application it is telling it require newer version of software or iOS 4.3. can I get this software or not. Please advise.

    I am using old iphone 3G with capacity of 8GB memory, when ever I try to download  any application it is telling it require newer version of software or iOS 4.3. can I get this software or not.  I even  restore my all my software online, in that process I lost my contacts, photos, notes & mails stored & saved in my iphone. After  that also no use, Please advise how and where can I get that.

    Iphone 3g can only go to 4.2.1
    Sorry

  • HT2292 gnature can't can't update new version of itunes due to error message saying invalid siupdate new version of itunes due to error messagecan't update new version of itunes due to error message saying invalid si saying invalid si

    can't update new version of itunes due to error message saying invalid si

    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Maybe you are looking for

  • Applications frequently failing to launch and/or not responding

    iTunes, Safari, and even Tweetdeck have all had this problem recently: either upon trying to launch them or bringing them up from a minimized status on the Dock, an application will fail to respond. It then won't even respond to a Force Quit, and the

  • How to create a master detail form on same page in apex 4.2.1

    Hi All, i need to design a master detail form on same page i am not finding an option in wizard from where i can do that. will appreciate your suggestions. Thanks

  • Using EWS to work with mail items from a range derived from Get-Date

    I am attempting to write a powershell script that uses EWS to move items from the prior month and create a folder named after that month to hold those items.  I am finding that the search filter only likes the format if you use .NET system.DateTime a

  • Plz tell me how to use JSpinner with JTable

    I have retrieve records from database but as the number of records(rows) are more than 1000 , i want to use JSpinner with JTable . plz solve my problem by giving the appropriate code for the same.

  • Parallel Background jobs - Reg.

    Hi All, Good Morning. I have below requirement : I have developed one report which gives missing document numbers for particular fiscal year. But my client asked that program  must run in Background for a given year from January until April next year