How to disable nag message for easy-webprint EX install

I didn't install Easy-WebPrint EX when setting up my Canon Pixma MP495 printer.  Ever since, I get a nagging message asking if I want to install Easy-WebPrint EX, but there is no option to disable the message that is very annoying.  How can the nag message be disabled?  I don't ever want the Easy-WebPrint software installed.
Gary

 
Group Policy settings
The following Group Policy settings have been added for Terminal Services printing:
Use Terminal Services Easy Print printer driver first
This policy setting is located in the following node of the Local Group Policy Editor:
Computer Configuration\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Printer Redirection
The possible values are:
Enabled or Not configured: If this policy setting is enabled or not configured, the terminal server will first try to use the Terminal Services Easy Print driver to install all client printers. If for any reason the Terminal Services Easy Print driver cannot be used, a printer driver on the terminal server that matches the client printer will be used. If the terminal server does not have a printer driver that matches the client printer, the client printer will not be available for the Terminal Services session. By default, this policy setting is not configured.
Disabled: If you disable this policy setting, the terminal server will try to find a suitable printer driver to install the client printer. If the terminal server does not have a printer driver that matches the client printer, the server will try to use the Terminal Services Easy Print driver to install the client printer. If for any reason the Terminal Services Easy Print driver cannot be used, the client printer will not be available for the Terminal Services session.
-According to MS using TS Easy Print renders jobs faster, cause they are smaller in size then emf. 
-There are steps to complete to see all user session printers, One was to add the "Print Server" role to the Terminal Server, add yourself to the "Print Operators" group and a few other things.  Do a search for it, you'll find it. 
-Also all clients MUST be running XP sp3 OR Vista sp1 AND .NET Framework 3.0 sp1.  The .NET Framework is what makes it all work correctly.  As far as the Arabic thing, can't help!Network Administrator

Similar Messages

  • How to configure Broadcast messaging for IC Webclient profile

    Dear all,
    How to configure Broadcast messaging for IC Webclient profile. what are the prerequisites for it?
    We are not using EP interface for IC Webclient, then where can I find broadcast messaging URL in SAP CRM system.
    I have checked for the relevant BSP application, but could not find.
    Please help me to configure the scenario successfully, your help will be highly appreciated.
    Best regards,
    Raghu ram

    Hi raghu
    In CRM Broad cast messaging application is CRM _BM,
    Go to easy access u2013 go to favourites u2013 select add other objects - select BSP Applications- then select CRM_BM Application.
    Select that BSP application and test it u2026
    `
    Regards,
    Narsimha

  • How to prevent error message for material description in MDG material detail screen, when user click on check action

    Dear Experts,
    I have a requirement for making material description as non mandetory in change request view of mdg material screen.
    I have done that using field usage in get data method of feeder classes, but still message is displaying.
    This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
    How to prevent error message for material description in MDG material detail screen, when user click on check action.
    Thanks
    Sukumar

    Hello Sukumar
    In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
    You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
    Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
    Regards, Ingo Bruß

  • How to give error message for the screen element text field when wrong i/p

    How to give error message for the screen element text field when wrong i/p
    when wrong input given
    eg. 
    I have a text box with SBOOK-CARRID
    so when user give wrong entry in text box i.e LG
    then I should give some error stating that the the input is invalid or not available ,
    now it showing the error of standard messages,
    i want manual message to be displayed when error comes.
    Thank you,
    Regards,
    Jagrut Bharatkumar Shukla

    Hi all,
    Thank you for your valuable reply,
    but the thing is that its a screen field,
    i.e text box not a selection screen
    i created in screen layout
    with name sbook-carrid
    now i want to get error message display if wrong i/p is given
    thank you.
    Regards,
    Jagrut bharatkumar Shukla,

  • How to disable SC message BBP_PD 008 and BBP_PD  882

    how to disable SC message BBP_PD 008 and BBP_PD  882

    Hi. Why do you want to disable 008? That message means no account assignment has been entered, you will not be able to save your cart.
    What is 882? I can not see that in SRM 5.
    Regards,
    Dave.

  • Does Anyone Knows How To Disable The "Check For Updates" Option in Adobe Edge Code and Reflow?

    Does Anyone Knows How To Disable The "Check For Updates" Option in Adobe Edge Code and Reflow?
    Thanks in Advance

    I don't think there is a way for Edge Code. I'm not sure about Reflow.
    Why don't you just upgrade? That will stop the notifications.
    Randy

  • How to write Error message for select options?

    Hi
    i have this select option statement
    SELECT-OPTIONS: s_fevor FOR afko-fevor.
    how to write error message for this?
    Regards
    Smitha

    Error messages are displayed for Select-options mostly on two conditions:
    1) You needs to check wether a value is entered or not its done by:
    a)
    Select-options:SELECT-OPTIONS: s_fevor FOR afko-fevor Obligatory.
       In this case error message is automatically throwed by system.
    b) You can do this in Selection Screen events.
    Ex:
    AT SELECTION-SCREEN./AT SELECTION-SCREEN ON S_FEVOR.
    IF S_FEVOR-LOW IS INITIAL.
    MESSAGE 'XXXXX' TYPE 'E'.
    ENDIF.
    2) You need to Validate the entered value:
    You can do this in Selection Screen events.
    Ex:
    AT SELECTION-SCREEN./AT SELECTION-SCREEN ON S_FEVOR.
    SELECT FEVOR
                 FROM AFKO
                 INTO AFKO-FEVOR
                 UP TO 1 ROWS
    ENDSELECT.        
    IF SY-SUBRC NE 0.
    MESSAGE 'XXXXX' TYPE 'E'.
    ENDIF.
    Regards,
    Gurpreet

  • How turn off I message for galaxy s4 on ipad

    How turn off I message for galaxy s4 on ipad

    You can't iMessage with an Android device. iMessages is an Apple app that only works with other iOS devices and Macs running Maverciks to Mountain Lion. What exactly are you trying to do?

  • Nag message for 2.3.1?

    Did I just miss it for previous updates, or is the nag message for 2.3.1 especially annoying and persistent? It pops up about every other song while I'm using my ATV and I don't recall this behavior in the past.
    -dan

    Winston Churchill wrote:
    Then why not simply update and it will go away.
    Because with Apple updates its pot-luck as to weather it fixes more than it breaks

  • How to Add error message for component from the baking bean

    I am in the situation, I need to add the h:message message component for each component at the time I am looking for an easy process something like I have to add the error message at the bean side, here I am using component binding approach but I am not able to add child for input Text components at the bean side, actually my final target is to add the message for each component when ever they get error and I have to change the style also.....
    So please anybody help me......

    Thanks for the response but one more thing right now I can't add message tag for each component so that I can add message from the baking bean as per ur solution I tried like this
    FacesMessage msg = new FacesMessage("Testing is going");
    msg.setSeverity(FacesMessage.SEVERITY_ERROR);
    FacesContext.getCurrentInstance().addMessage(tf_ADD1.getId(), msg);
    it is working but it is showing on the top of the for even no problem but I need to change the component color based on the message but I am not able to achieve that so how can I do that from backing bean now I can't add tags for each component.
    So please show me a way.

  • How to disable nag screens about updating to Firefox 24

    I would like to know how to disable the endless nag screens inviting me to update to Firefox 24.
    I do not want Firefox 24 because I tried it for two weeks and it was repeatedly crashing - several times in each day - or simply freezing. I cannot work this way and so I have downgraded to a previous version of Firefox and I have not had a single problem in a whole month.
    Please be aware that I do not allow Norton products on my computer so that is not an issue.
    I keep a very clean computer - scanning EVERY night before shutdown with CCleaner and JetClean with Avast running permanently in the background. I also scan weekly with Superantispyware.

    Note that using any version older than 24 has security risks, I would update and then try to post crash reports using the instructions below.
    First update Firefox
    * [[Update Firefox to the latest version]]
    '''Then once as Firefox crashes 5 times and you have submitted the crashes to mozilla, using the [[Mozilla Crash Reporter]].''' Place crash ID's to this site to find how the problem can be fixed.
    #Enter ''about:crashes'' in the address bar (that's where you enter your website URL) and press Enter. You should now see a list of submitted crash reports.<br><br>[[Image:aboutcrashes.png|width=520]]
    #Copy the '''5''' most recent crash ID's that you see in the crash report window and paste them into your response here.
    More information and further troubleshooting steps can be found in the [[Firefox crashes]] article.

  • How to extract error message for each output type.

    Hi All,
    Need your advice on the problem that I have.
    Expected Solution:
    1. Create an extra column for displaying header output error message from VF02 into a report program.
    Steps that i have did:
    1. Go to transaction VF02.
    2. Enter a billing document number.
    3. Hit enter. Click "Goto" > Header> Output
    4. Click on the status that is red colour. Click on "processing log".
    5. Press "F1" on the red colour message type. (Found out that it is a structure).
    Need your advice on the question that I have:
    1) How do we know that which "not successfully" process output type belong to which error message class?

    Hi Brad Bohn,
    Thanks for your advice. I am so sorry about that. Thanks so much for your advice. And i have follow your advices and steps given by you. Appreciate it very much.
    But for this issue about how to extract message for each output type. I have follow your steps by using SE30 to trace VF03 and I managed to found out that they are using this function module "WFMC_PROTOCOL_SHOW". Need your advice on this, how do we know each different output type with different error message is pulled from?
    From my further research and in depth debugging into this function module, i  manage to find this global internal table "PROTO_TAB" which stores all the text messages for each output.  How does this internal table is populated?
    Thanks in advance.
    Regards
    Shawn

  • How to disable SSL v3 for sun os 5.6 (OAS 4.0.8), I am facing POODLE vulnerability issue?

    my Website is hosted on Sun OS 5.06 (OAS 4.0.8) and using web server : Oracle_Web_Listener/4.0.8. Website is configured to use https for secure pages and it was working fine from last 10 years but suddenly i am getting complaints from my customers that they can not browse site on chrome version 40 and above and firefox 34 and above.
    I searched for this issue and found that there is POODLE attack which may causing this issue. now the only solution i can see is to disable SSL v3 on server.
    Can any help me out with the process or an idea, How to disable SSL V3 on this Olde server? its sun microsystem server.

    Hi Aamir,
       This is old software, been a while since I saw one of these.
        Normally when SSL was setup there were two listeners, one with SSL and one without, in a different port, so you could try to find this second port, which may work without any need to change the configuration.
        Else, try to check on the OAS manager (Usually on port 8888), the HTTP listener -> WWW -> Network, if there is a setup only for the SSL port, you will need to add a new line, with the same configuration, but a different port and the security disabled.
        Also, there may be some setting on the application itself for the url path. If so, when you navigate in the application it will try to redirect you back to the SSL port. In that case you will need to figure out where to change that, which depend on the application itself.
       Found this page on google with the process to setup SSL on OAS 4.0, you need to do the inverse of step 5.
    WoSign Support: SSL Certificates Installation Instruction - Oracle Web Server (OAS 4.0.8)
    Regards,
    Luis

  • How to disable the message that pops up every time i connect my iphone "photos in the camera roll of iphone cannot be imported because the device is locked with a passcode"?

    Wrongly posted in iPhoto forum, should probably be posted here instead.
    I want to remove the message that pops up every time i connect my IPhone that says: "Photos in the Camera Roll of "Name" cannot be imported because the device is locked with a passcode.".
    This computer is not one that I want to import photos to (or sync with the iPhone), so this message is just very annoying, and it pops up all the time. I cannot find a way to disable this message. It is constantly appearing. No application is launching, I have turned off the iPhoto launch in the Image Capture app as well as in iPhoto. Thanks in advance if anyone has any information about this.

    Because your computer sees your phone, as it would see any digital camera, as long as you have photos in your camera role. Since you state you don't sync with this computer & have a passcode on your phone, that's why you get that message. The only way to prevent that message is either start syncing with this computer; remove the photos from your camera roll prior to connecting; or first turn off your passcode before you connect. Either that, or you live with it.
    You shouldn't be storing photos in your camera roll anyway. iPhone camera roll is not designed for photo storage. You should be regularly importing them.

  • How to change bounce message for spam tagged email?

    Hello,
    I'm checking outgoing email messages for spam. I will send bounce to email sender (user from my domain) if message is tagged as positive or suspected spam. ok, I can set it, but how can I change text in bounce message?
    default bounce if mail is tagged as spam is:
    Your message did not reach some or all of the intended recipients.
    Subject: FW: something
    Sent: 7/12/2009 8:33 PM
    The following recipient(s) could not be reached:
    [email protected] on 7/12/2009 8:35 PM
    The e-mail system was unable to deliver the message, but did not report a specific reason. Check the address and try again. If it still fails, contact your system administrator.
    <smtp.domain.com #5.0.0 smtp; 5.x.0 - Message bounced by administrator (delivery attempts: 0)>
    ^^ but there is no information for the sender that message is not possible deliver, because is tagged as spam.
    Is it possible to change this default message?
    (AsyncOS: v6.5.2-101)
    martin

    You are correct that it doesn't appear that the Positive Spam or Suspect Spam setting doesn't appear to give you any leeway on using a different bounce profile/message to whomever you bounce it back to.
    You may want to consider this workaround.
    1. In the Action, change it to "Deliver"
    2. In the Advanced section of both the Positive and Suspect spam, there is a section labeled "Add Custom Header". Add a custom header like the following:
    X-Internal-Spam-Message: true
    3. Then, since this message will still go through the outgoing content filters, you can create an outgoing content filter that looks for the "X-Internal-Spam-Message" header. If that header exist, then the outgoing content filter will match. For the action, you may need to use the "notify()" action and notify the original sender that it could not get delivered since it was detected to be spam. There is an option to attach the original message. The reason you need to use the notify() instead of the bounce() is because bounce doesn't currently have the option to specify which bounce profile to use.
    You can only specify a different bounce profile in the "Mail Policies > Destination Controls".
    Let me know if you have any question.

Maybe you are looking for