How to disable scheduled task through database?

I would like to know to disable scheduled task without OIM running, preferably through the database.
OIM has out of the box schedule tasks that are set to run when OIM starts, and I would like to prevent that from happening.
Is is possible to disable these tasks when OIM is not running?
if possible I would like to know what I need to do, preferably through the database

The QRTZ92_TRIGGERS table contains the trigger time of the schedule tasks. You can directly modify the START_TIME and the NEXT_FIRE_TIME columns to future dates in order to prevent the scheduled jobs from starting.
You can also stop the Scheduler, which is responsible for kicking off the scheduled jobs.
To manually stop the Scheduler go to http://OIM_HOST:OIM_PORT/SchedulerService-web/status
You can configure the oim-config.xml so that the Scheduler is not started when OIM starts.
Reference: Managing Scheduled Tasks
To disable a schedule task, you have to have OIM running. You can use the APIs, modify the schedule tasks metadata (<taskStatus>false</taskStatus>), or use the UI to disable the schedule tasks.

Similar Messages

Can labview do schedule task on database ??

hi all
Can labview does schedule task with database ???

Yes, it's a programming language...
Maybe you should provide more details to your question!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Scheduled Tasks In Database

not sure how to do it, but pls advice.
I have the schedule task to pass diffrent ID nto url for the same page. If I have 3 IDs, I don't want to create 3 pages from CF admin schedule like
task.cfm?id=1
task.cfm?id=2
task.cfm?id=3
Instead of doing that, i create 2 pages below
Thanks

got 3 ID returned from variables.q_compInfo query(ID =1, 2 and 3). I want to loop thru then pass id into task.cfm dynamiclly but runs it for 3 time.
<cfset baseUrl = ("http://" &cgi.server_name &getDirectoryFromPath( cgi.script_name )) />
<cfoutput>
<cfloop query="variables.q_compInfo">
<cfhttp method="get" url="#baseUrl#task.cfm" timeout="1" throwonerror="false">

<cfhttpparam type="url" name="id" value="#task.ID#"/>
</cfhttp>
</cfloop>
</cfoutput>

when run.cfm excuted, I expected it query will be run 3 time and update this table for 3 dirrent ID.
<cfquery name="update" datasource="#variables.dsn#">
update tbl
set schedule = 3
where id = #url.id#
</cfquery>

More information - Issue happened last night.
Here is what the application log says
++[Wed Nov 09 18:19:15 2011]Local/Finance/Bud/admin@Native Directory/3316/Info(1012668)++
++Calculating [ Schedule(ICRC501)] with fixed members [Measure(Cash, Irrec VAT, MA Adjustment, FAS Adjustment, Manual Accruals, Order Accruals, Prepayments, Manual Accruals Reversal, Order Accruals Reversal, Prepayments Reversal); Activity Type(]++
++[Wed Nov 09 18:19:15 2011]Local/Finance/Bud/admin@Native Directory/3316/Info(1012677)++
++Calculating in serial++
++[Wed Nov 09 22:15:03 2011]Local/Finance///8456/Error(1013291)++
++Failed to logout user [admin@Native Directory]: user has requests running++
You can see that a calculation was running (normally takes 10mins or so) but nothying happens after 18:19.
The below is an extract from the MAXL log:
+OK/INFO - 1012569 - Formula on (or backward dependence from) member [ICRC501] forces calculation to execute in serial mode.+
ERROR - 1042013 - Network error [10054]: Cannot Receive Data.
ERROR - 1042012 - Network error [10054]: Cannot Send Data.
MAXL> execute calculation 'Finance'.'Bud'.'PMRecB12' ;
+ERROR - 1042006 - Network error [10061]: Unable to connect to [hypessbase-liv:1423]. The client timed out waiting to connect to Essbase Agent using TCP/IP. Check your network connections. Also make sure that server and port values are correct.+
SESSION - 1241102 - Internal API error 1042006.
Anyone know what is possibly going on? Could it still be due to fragmentation and the network errors are a bit of a red herring?
Paul

How to disable scheduled backups?

I'd like to disable scheduled backups because my Norton antivirus software cannot be copied and I must be present for the first 20 minutes of backup to choose "skip" for each of about 20 Norton files. This occurs even though I tried to exclude files having *Norton* in their names, and even when I turn off Norton software before backup. I'm running ThinkCentre M55, 8811-CTO, with Windows XP Pro. I've removed backup from the XP "Scheduled Tasks" manager, and in "Config AwayManager tasks", Backup using R&R is not checked. In R&R, "Set Schedule, Schedule your Backups" is not checked. Despite these settings, once a day every day I continue to get the "backup cannot copy the ....(Norton)...file" window. I tried allowing one scheduled backup to run to completion, hoping that if I did this, R&R would no longer run auto backups. But it didn't work. How can I stop R&R from running auto backups? I'd prefer to run manual backups at my convenience.
Solved!
Go to Solution.

If you can't disable scheduled backups (under Set Schedule etc.), check under Scheduled Tasks (XP) or the
equivalent for your OS and see if anything labelled R&R is set to run, if so disable it.
In R&R you can exclude entire directories and directory trees from being backed up,
this should be better than trying to filter on file names.
Advanced - Exclude Files.
What I did is to set up excluded directories, but thereafter I run R&R from a batch file in command line mode.
This is documented in a manual that can be downloaded from Lenovo.
Before I start it I stop internet access, and shut down anti-virus (Kaspersky in my case), and verify that all anti-virus processes
have stopped using Process Explorer (a free download from Microsoft). I also manually stop Google Desktop,
Google notifier, in general everything that seems like it might interfere.
Since I started following this procedure I no longer have any issues.
You can also add a batch file command to shut down the computer after the backup,
which is desirable.
Here's most of my batch file:
echo Perform full backup
echo Delete old backup on USB drive
"c:\program files\lenovo\rescue and recovery\rrcmd" delete location=U silent
rem above deletes the old backup on the USB drive
echo Create base backup on USB drive
"c:\program files\lenovo\rescue and recovery\rrcmd" backup location=U name=base silent
rem above backs up to USB
echo Shutdown
computershutdown -s -f

How to create scheduled task to delete failure/open tasks

hi.
I have a question that I hope someone can give me some input to.
we have an OIM 9.1.0.1 installation and have a situation where we have around 14 500 open tasks. we read somewhere that this might cause performance issues. we have also found a HOWTO on Oracle Metalink that explains how to delete these tasks. i states that one should:
- Create a scheduled task which uses the API:
Thor.API.Operations.tcProvisioningOperationsIntf.setTasksCompletedManually
...and that's it. it doesn say anything else. doing this by creating a scheduled task in OIM Admin Console will not work since we don't have this Java class. is there anyone who has sort a similar problem? any help/tips/guidelines are appreciated.
P.S.: The Oracle Metalink HOWTO:
Link: [https://metalink.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(from=BOOKMARK&bmDocType=HOWTO&bmDocDsrc=KB&bmDocTitle=How%20to%20%3Cb%3EDelete%3C/b%3E%20Failure%20or%20Cancelled%20%3Cb%3ETasks%3C/b%3E%20in%20%3Cb%3EOpen%3C/b%3E%20%3Cb%3ETasks%3C/b%3E&bmDocID=731282.1&viewingMode=1143))]
Edited by: user10378227 on Oct 27, 2009 1:07 AM

Use this link:
How to create a new schedule task from java code
http://download.oracle.com/docs/cd/E10391_01/doc.910/e10361/tasks_archival.htm#sthref85

How to set schedule task in windows using java code

Hi,
i want to set the schedule task in windows os using the java code can any one help me on that
can any one thinks i need to wright a dll file for that which set the schedule task for me which dll i can use in my java code.
thanks in advance.

Maybe this will help you?

How to disable Scheduler logging in CF10

Hi,
In the coldfusion-out.log we are seeing scheduler log entries like this:
Nov 11, 2014 20:54:14 PM Information [ajp-bio-8012-exec-127] - Starting HTTP request {URL='http://somesite.com:80/1.2?output=xml', method='get'}
Nov 11, 2014 20:54:14 PM Information [ajp-bio-8012-exec-127] - HTTP request completed {Status Code=200 ,Time taken=313 ms}
Nov 11, 2014 20:55:00 PM Information [scheduler-2] - Run Client Storage Purge
Nov 11, 2014 21:00:00 PM Information [DefaultQuartzScheduler_Worker-1] - Task default.blah triggered.
Nov 11, 2014 21:45:00 PM Information [DefaultQuartzScheduler_Worker-2] - HTTP request completed {Status Code=200 ,Time taken=773 ms}
Quite simply, how can we disable them?
We have no logging enabled for scheduling in CF10 Admin, and yet they are still generated.
Advice appreciated.

Thanks for the speedy reply, however in that page you mention I can see coldfusion-out.log but I only want to stop scheduler events being logged. How do I do that? There is a scheduler.log, but the events are not appearing in that log file; they are appearing in coldfusion-out.log. The logging is very confusing in CF10, at least to me!

How to use schedule task for execute my java file

I have five java file.
I want every 20 minutes all of them executed.
how to write the program for scheduling that execution.

> I have five java file.
I want every 20 minutes all of them executed.
how to write the program for scheduling that
execution.
I recommend using an external application (e.g., Task Scheduler, cron, etc.) to handle this kind of scheduling.
~

How To Disable Connections or Freeze Database

I have no need to do so right now but I'm curious what the recommended process would be if there's an issue with Oracle 11g & one had to keep the database engine up and running but stop all users from connecting while 'X' was investigated. Do you guys have any recommendations (examples) on standard / simple procedure to stop users from connecting to Oracle 11g and querying the database or altering the database?
Thanks for any info and like I said, this is a hypothetical question as to what would one do if this issue came up. I don't have an actual performance issue that requires me from limiting database access.
Thank you!

>
When searching Google, you don't get the details that could make or break an idea you have but rather generic instructions if that. Yes all this could have been easily found on some janky site linked off Google but you miss specific reasoning and theory based on my specific needs
>
Totally wrong on both counts. You may get some initial satisfaction from copping an attitude and trying to blame others for your omissions but that is not the way to learn.
If you want to learn you need to be able to analyze what other, more experienced people are trying to tell you and then try their suggestions.
You asked
>
I'm curious what the recommended process would be if there's an issue with Oracle 11g & one had to keep the database engine up and running but stop all users from connecting while 'X' was investigated. Do you guys have any recommendations (examples) on standard / simple procedure to stop users from connecting to Oracle 11g and querying the database or altering the database?
>
And sb92075 responded with
>
ALTER SYSTEM ENABLE RESTRICTED SESSION;
>
At that point you should have thought about that reply and try to understand what was meant.
Did you recognize that as an Oracle command? If not you should have followed up with questions like
1. what does 'ALTER SYSTEM' mean? What is that?'
2. where can I get more information about that ALTER SYSTEM reply you provided?
If you recognized the reply as an Oracle command then it is obvious how to get more information about it. You check the Oracle documentation. If you don't have it you can 'Google' for it.
Did you do that? Apparently not because your next question was
>
So if I run this command as SYS, does that mean . . .
>
That is an indication that an OP is too lazy to do anything at all to answer their own question. Why should we look something up in the documentation if you won't bother to do it?
>
I am sorry to see that GOOGLE is broken for you.
>
Perfectly appropriate response for someone that is too lazy to do any work. Especially after you were given the exact answer you ask for.
So let's see what the result is if you had thought about exactly 'why' you were given this response.
I recognized ALTER SYSTEM as an Oracle command so my first thought is to read the Oracle documentation for that command to see what it says. I have the Oracle documentation but in order to provide a link to users asking questions I prefer to find the doc on the net so I can provide a link that lets a user read the same documentation, for the same version of Oracle, that I read.
So I entered a Google search
>
oracle 11g doc ALTER SYSTEM ENABLE RESTRICTED SESSION;
>
And what do you know?
The VERY FIRST RESULT was for
>
ALTER SYSTEM - Oracle Documentation
>
which took me to this link - http://docs.oracle.com/cd/E11882_01/server.112/e17118/statements_2014.htm
And if you search for RESTRICTED SESSION (words in the command you were provided) you will find
>
RESTRICTED SESSION
The RESTRICTED SESSION clause lets you restrict logon to Oracle Database. You can use this clause regardless of whether your instance has the database dismounted or mounted, open or closed.
Specify ENABLE to allow only users with RESTRICTED SESSION system privilege to log on to Oracle Database. Existing sessions are not terminated.
This clause applies only to the current instance. Therefore, in an Oracle RAC environment, authorized users without the RESTRICTED SESSION system privilege can still access the database by way of other instances.
Specify DISABLE to reverse the effect of the ENABLE RESTRICTED SESSION clause, allowing all users with CREATE SESSION system privilege to log on to Oracle Database. This is the default.
>
Which answers the question you ask instead of looking it up yourself.
So your comment that
>
When searching Google, you don't get the details that could make or break an idea you have but rather generic instructions if that
>
is totally wrong. I searched Google and got the exact details that were needed.
And this?
>
Yes all this could have been easily found on some janky site linked off Google but you miss specific reasoning and theory
>
The Oracle doc was the very first link provided! And it wasn't a link to 'some janky site' - it was the official Oracle documentation. And it contains the reasoning and an example.
So next time you need help
1. leave the attitude behind - it doesn't impress anyone and makes it less likely that people will want to help you in the future.
2. check the documentation first - if you don't know how to find something in the docs then ask what it is called or what doc it is in.
3. when you are given a command or example go back to the doc and read the complete command and all of the syntax options. If you have any questions about how to interpret something then ask.
4. demonstrate that you are willing to do more work to find an answer than any of us - it's your problem - why should we spend time helping you if you aren't willing to spend your own time?

How to do scheduled SFTP through an ABAP code

Hi All,
i have a scenario like this:
XI -> Firewall -> UNIX machine <- 3rd PARTY.
Since 3rd parties are putting their files on UNIX machine, so after UNIX machine there is a firewall so that the 3rd parties cant access the XI machine.
Since firewall is there, so i cant do normal FTP to get files from UNIX to XI....Moreover it is client requirement to do SFTP to get files from UNIX to XI.
So i have to do SFTP to get the files from UNIX machine.Moreover i have to bring the files at a scheduled time on weekly basis.
i have seen the SAPFTP function module in SE37.
i have to write an ABAP program to do this scheduled SFTP to get the specified files at scheduled times only.
Can anybody suggest how to do this thing.
Thanks,
Rajeev Gupta

Hi All,
according to SAP note, SFTP can be achived by using SAPFTP over SSH. it then says that communication via SSH can be configured for both active and passive mode of FTP communication.
Can anybody tell how to configure communication via SSH for both active and passive mode of FTP communication.
Because after the above is done, then i think that SAPFTP will use SSH for secure FTP.
Can anybody also tell how to install SSH client local to client system and SSH demon local to FTP server system.
Thanks,
Rajeev Gupta

How to disable formsetting menuitem through sdk code

hi experts,
I am facing bit problem while loading my udo screen ,when my screen is getting opened sap's menuitem formsetting is enable'd,My requirement is to disable the formsetting menuitem only when udo screen opens through sdk code.so,that user cannot change any of the field in the matrix.
help would be appreciated.
regards,
Vijay Kumar

Hi Vijay ,
Try This.....
'After Loading form
oform=sbo_application.forms.item("ur fromid")
sbo_application.Menus.Item("5890").Enabled = False
Thanks
Shafi

How to disable multi-task on iPod Touch?

I find the multi-task a troublesome and a waste of battery as I always forgot to clean them off. Is there any options to disable it?

I done some testing on this with a system monitoring app. There is no need to go in your multitasking tray all the time and remove apps in there. All you need to do is simply restart your unit and it kills ALL processes running in every app in there. So, if you restart your unit every day or so (which only takes around 30 seconds), you should get a little longer better battery life.
Basic troubleshooting steps.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

How to disable menu items through c# in adobe x standard. I didn't find the required APIs.

Hi
We are working on a desktop application on C# which uses Adobe Express 5.0. to view the PDF files. Recently we had an issue reported that PDFs created in Adobe 9 are not opening up. So we decided to upgrade to Acrobat Adobe X Standard. Now the issue is that I have to suppress controls (tool bars(or Panels), menu items) for which I'm using the below code which worked in express 5.0 but not on Adobe X. Also I want to view the toolbar by default instead of the translucent menu at the bottom of the page.
Acrobat.CAcroApp.ToolButtonRemove("SaveFileAs");
Acrobat.CAcroApp.MenuItemRemove("Quit");
Please help.
Thanks,
vinay

Hi
We used javascript to find out the names of the menu items that are present in the Adobe 9.0 Std. I presume that it would work even for Adobe 10.o as well. After that in the .NET C# code we have used App.RemoveMenutItem ("<<MenuItemName>>") to disable all the menu items that we dont want You can search for javascript references for Acrobat and you would find many.
Also I've figured out another way where you remove the .api files from your plugins folder, however I'm not sure if it would create any further problems. This is route is not taken, atleast for now.
Please post here the route taken by you.
Thanks.

How to disable the "Connect to Second Node" task of the Windows Server 2012R2 and run a customized verision of this task?

I am running a customized ICT. When I am running the ICT on a single node cluster, it is automatically detecting the if remote node is present? I need to disable this feature of ICT and tweak it to have a customized version of this. How to disable this
task?

Hi Sounak Ghosh,
You can customize the ICT by the following KB:
Windows Storage Server 2012: Planning and Deployment
https://technet.microsoft.com/en-us/library/jj643306.aspx?f=255&MSPPError=-2147217396
Server Manager Extension Schema
https://technet.microsoft.com/en-us/library/hh825683.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

OIM Schedule task query

Hi
I have installed two separate weblogic servers (non-cluster) and installed OIM 9101 on them with same Oracle Database. This system does not include any other servers. I am planning to use a hardware load balancer on top of these two OIM Weblogic servers.
I have deployed EBS trusted source recon connector. This connector has a recon schedule task which run at every 6 hrs. It was working fine on single node OIM weblogic pair. Now I have two weblogic servers with corresponding OIM servers. I wonder how the schedule task will work now. which OIM will have the priority ??
any idea about this..

Disable schedule task in one of the servers, so that it does not account for running schedule purposes. Go to xellerate/config/xlConfig.xml
You can find the scheduler section and change the StartOnDeployment parameter to false. SO that this server never runs the scheduler.
Suren- The database is same ! ! !
Thanks
Sunny

How to disable scheduled task through database?

Similar Messages

Maybe you are looking for