How to do scheduled SFTP through an ABAP code

Hi All,
i have a scenario like this:
XI -> Firewall -> UNIX machine <- 3rd PARTY.
Since 3rd parties are putting their files on UNIX machine, so after UNIX machine there is a firewall so that the 3rd parties cant access the XI machine.
Since firewall is there, so i cant do normal FTP to get files from UNIX to XI....Moreover it is client requirement to do SFTP to get files from UNIX to XI.
So i have to do SFTP to get the files from UNIX machine.Moreover i have to bring the files at a scheduled time on weekly basis.
i have seen the SAPFTP function module in SE37.
i have to write an ABAP program to do this scheduled SFTP to get the specified files at scheduled times only.
Can anybody suggest how to do this thing.
Thanks,
Rajeev Gupta

Hi All,
according to SAP note, SFTP can be achived by using SAPFTP over SSH. it then says that communication via SSH can be configured for both active and passive mode of FTP communication.
Can anybody tell how to configure communication via SSH for both active and passive mode of FTP communication.
Because after the above is done, then i think that SAPFTP will use SSH for secure FTP.
Can anybody also tell how to install SSH client local to client system and SSH demon local to FTP server system.
Thanks,
Rajeev Gupta

Similar Messages

How to generate new perner number using Abap Code in pa0002. what is the fu

how to generate new perner number using Abap Code in pa0002. what is the function Module used.

hi
define internal number ranges for ur implementation then when u run PA 40 do not input any employee number , system will generate the employee number automatically.
Regards
sameer

How to Stop at Source System's Abap Code from BI Infopackage Trigger

Hi Experts,
I have enahanced 2 fields to some standard data source, that fields data is comiong fine to RSA3 in Source system.
i am not getting 2 fields data to BI PSA, but that 2 fields data i am getting at in RSA3 Tcode source system.
i have tried all the ways to get data to BI PSA, but no luck.
so, while running infopacke from BI i need to stop at Source System's Abap code where i have wriiten the code for those 2 fields.
so, please any one can explain, how to stop at source system's Abap Code once i trigger infopackage from BI.
Regards,
Nagaraju K.

Hi,
which data source on your working?
master data or transaction data
enter the TCODE- CMOD
choose the project
select the funciton exit - EXIT_SAPLRSAP_001 - Transaction data
                                    EXIT_SAPLRSAP_002 - master data attr
                                    EXIT_SAPLRSAP_003 - mster data text
                                    EXIT_SAPLRSAP_004 - master data hier.
choose the include program - ZXRSAU01.
go to source code tab -> go to change mode -> find the code will start form here
EX- : when " ZLIS_13_VDITM
if not required don't put break-point .
just comment it code.
Thanks,
Phani.

How to translate an excel macro to ABAP code

Hi Guys,
My requirement is need to put the subtotaling option w.r.t divison when i download the file to an excel sheet via OLE.
Iam able to get the records in the excel sheet but unable to write the macro in ABAP code.
the macro which i recorded in Excel is
Range("A1:C3").Select
Selection.Subtotal GroupBy:=2, Function:=xlSum, TotalList:=Array(3), _
Replace:=True, PageBreaks:=False, SummaryBelowData:=True
how do i convert this into ABAP code .Pls help. Thanks...
the data might be like
NAME DIVISION AMOUNT
ABC IT 400
DEF BPO 500
HTG IT 400

Hi,
You can run an excel macro like this
CREATE OBJECT h_excel 'EXCEL.APPLICATION'.
Call Method of h_excel 'WORKBOOKS' = h_mapl.
set property of h_excel 'VISIBLE' = 0.
Call Method of h_mapl 'OPEN'
EXPORTING
#1 = d_file.
CALL METHOD OF H_EXCEL 'ActiveWorkbook' = h_book .
CALL METHOD OF H_book 'Activesheet' = H_sheet .
CALL METHOD OF h_excel 'RUN'
EXPORTING
#1 = ld_macro.
Check the links below as well
http://sample-code-abap.blogspot.com/2009/07/controlling-excel-using-ole-automation.html
http://arthur_ong.tripod.com/xab017.htm

How to disable scheduled task through database?

I would like to know to disable scheduled task without OIM running, preferably through the database.
OIM has out of the box schedule tasks that are set to run when OIM starts, and I would like to prevent that from happening.
Is is possible to disable these tasks when OIM is not running?
if possible I would like to know what I need to do, preferably through the database

The QRTZ92_TRIGGERS table contains the trigger time of the schedule tasks. You can directly modify the START_TIME and the NEXT_FIRE_TIME columns to future dates in order to prevent the scheduled jobs from starting.
You can also stop the Scheduler, which is responsible for kicking off the scheduled jobs.
To manually stop the Scheduler go to http://OIM_HOST:OIM_PORT/SchedulerService-web/status
You can configure the oim-config.xml so that the Scheduler is not started when OIM starts.
Reference: Managing Scheduled Tasks
To disable a schedule task, you have to have OIM running. You can use the APIs, modify the schedule tasks metadata (<taskStatus>false</taskStatus>), or use the UI to disable the schedule tasks.

How to implement this calendar function in ABAP code

Hi everyone,
Our requirement is : Give a date (e.g. YYYY.MM.DD, 1983.12.26), then we need to know which weekday it is. Is there a existing FM for this fuction? or how to implement it in ABAP?
Thanks a lot for any hint
Best regards
Deyang

Hi Deyang Liu,
Could you please check these the below links they would give you some idea ....[SAP Calendar Control|http://help.sap.com/printdocu/core/print46b/en/data/en/pdf/BCCICALENDAR/SAP_KALENDER.pdf]
[Calendar functions |http://help.sap.com/saphelp_nw04/Helpdata/EN/2a/fa00f6493111d182b70000e829fbfe/content.htm]
[SAP Functions|http://abap4.tripod.com/SAP_Functions.html]
[Determine calendar |http://help.sap.com/saphelp_nw04/helpdata/en/2a/fa00e9493111d182b70000e829fbfe/content.htm]
Regards,
S.Manu

How to reduce the run time of ABAP code (BADI) when it is reading huge data from BPC Cube and thus writing back huge data to the cube.

Hi All ,
In Case of reading huge amount of record from BPC Cube from BADI code , performing calculations and writing back huge amount of data into the cube , It takes lot of time . If there is any suggestion to read the data from Cube or writing data into the cube using some Parallel Processing methods , Then Please suggest .
Regards,
SHUBHAM

Hi Gersh ,
If we have a specific server say 10.10.10.10 (abc.co.in) on which we are working, Then under RZ12 we make the following entry as :
LOGON GROUP          INSTANCE
parallel_generators        abc.co.in_10         ( Lets assume : The instance number is 10 )
Now in SM59 under ABAP Connections , I am giving the following technical settings:
TARGET HOST          abc.co.in
IP address                  10.10.10.10
Instance number          10
Now if we have a scenario of load balancing servers with following server details (with all servers on different instance numbers ) :
10.10.10.11
10.10.10.13
10.1010.10
10.10.10.15
In this case how can we make the RZ12 settings and SM59 settings such that we don't have to hardcode any IP Address.
If the request is redirected to 10.10.10.11 and not to 10.10.10.10 , in that case how will the settings be.
I have raised this question on the below thread :
How to configure RZ12 and SM59 ABAP connection settings when we have work with Load Balancing servers rather than a specific server .
Regards,
SHUBHAM

HOW CAN I MARK A CHECKBUTTON USING ABAP CODE?

HOW CAN ALL THE CHECKBOXES IN MY ALV BE MARKED WHEN I CLICK ON A BUTTON?

HI,
check this code.
TABLES:SSCRFIELDS.
PARAMETERS:c1 AS checkBOX,c2 AS checkBOX,
c3 AS checkBOX,c4 AS checkBOX.
SELECTION-SCREEN PUSHBUTTON /10(5) BUTTON1 USER-COMMAND ABCD1.
SELECTION-SCREEN PUSHBUTTON 20(7) BUTTON2 USER-COMMAND ABCD2.
INITIALIZATION.
BUTTON1 = 'Check'.
BUTTON2 = 'Uncheck'.
AT SELECTION-SCREEN.
case SSCRFIELDS-UCOMM.
when 'ABCD1'.
c1 = 'X'.
c2 = 'X'.
c3 = 'X'.
c4 = 'X'.
when 'ABCD2'.
c1 = ' '.
c2 = ' '.
c3 = ' '.
c4 = ' '.
ENDcase.
rgds,
bharat.

How to activate data in ODS using ABAP code

Hi
Question like in subject.
THX
Adam

Hi........
U can use Program : RSDG_ODSO_ACTIVATE ...........During activation the M version will be read.
There are two other options besides the activation:
Check only >> this will only check consistency of the ODS and no activation will be executed
Clean up DDIC structures >> this deletes old generated tables, which were only necessary in previous releases
Also check this link..............it is very useful.......
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action%3fpageid=35458
Regards,
Debjani........

How to assign a class to the material through ABAP code

Hi,
I am working on a transaction in ABAP which takes material name, material description and a class from the user. Now, after this much input I create the material, its configuration profile through the ABAP code. For this I know I have to make relevant entries in tables MARA, MAKT, CUCO.. and also check for the existence of the class in the table KLAH.
Now the point where I am stuck is that I am not able to get how to assign the class to the material through the code. I am able to get the internal class id from the table KLAH but I am not able to figure how the internal material number is being generated in the table INOB and i need this number as well as the internal class id number to insert a record in the table KSSK to show proper assignment.
Can anyone please suggest me some solutions?
Thanks....

Hi,
I tried using BAPI_OBJCL_CREATE. In order to understand it functioning better I created a material and class (of type 300) through transactions MM01 and cl01 respectively. Then i created a report and called the FM BAPI_OBJCL_CREATE, gave the material name as the material above, table as MARA, class as the one i created above and class type 300. I even analysed the message of the table return (return-message) after executing the report. The messahe said assignment done. But when I checked mnaually in cl20n there was no assignment done to the required material. There was also no entry for the required material in the table INOB which I need.
Can anyoene tell me that where am i going wrong? Please do help.

How-to trigger a process chain using ABAP?

Does anybody know how to trigger a process chain using ABAP code?
Any help would be appreciated!
Thanks
Ioan

Hi Ioan,
try this in your ABAP:
    CALL FUNCTION 'BP_EVENT_RAISE'
      EXPORTING
        eventid         = 'Your Event'
        eventparm       = 'START'
        target_instance = ' '
      EXCEPTIONS
        OTHERS          = 01.
and schedule your process chain, waiting for 'Your Event'.
regards
Siggi

How to call a transaction from ABAP code

Hi everybody,
How do I run a transaction from my ABAP code?
For example, through my ABAP code, I want to call the ME24 transaction (Maintain Purchase Order).
Thanks for the help,
Roy

CALL TRANSACTION
Syntax
CALL TRANSACTION ta { [AND SKIP FIRST SCREEN]
 | [USING bdc_tab [bdc_options]] }.
Extras:
1. ... AND SKIP FIRST SCREEN
2. ... USING bdc_tab [bdc_options]
Effect
The statement CALL TRANSACTION calls the transaction whose transaction code is contained in data object ta. The data object ta must be of character type and must contain the transaction code in uppercase letters. If the transaction specified in ta cannot be found, an untreatable exception is triggered. The additions suppress the display of the initial screen and allow you to execute the transaction using a batch input session.
At CALL TRANSACTION the calling program and its data is kept, and after exiting the called transaction, processing is resumed in the calling program after the call.
When the transaction is called, the ABAP program linked with the transaction code is loaded in a new internal session. The session of the calling program is kept. The called program runs in an SAP LUW of its own.
If the called transaction is a dialog transaction, after loading the ABAP program the event LOAD-OF-PROGRAM is triggered and the dynpro defined as initial dynpro of the transaction is called. The initial dynpro is the first dynpro of a dynpro sequence. The transaction is finished when the dynpro sequence is ended by encountering the next dynpro with dynpro number 0 or when the program is exited with the LEAVE PROGRAM statement.
If the called transaction is an OO transaction (as of release 6.10), when loading all programs except class pools the event LOAD-OF-PROGRAM is triggered and then the method linked with the transaction code is called. If the method is an instance method, implicitly an object of the corresponding class is generated and referenced by the runtime environment. The transaction is finished when the method is finished or when the program is exited using the LEAVE PROGRAM statement.
After the end of the transaction call, program execution of the calling program resumes after the CALL TRANSACTION statement.
Note
At the statement CALL TRANSACTION, the authorization of the current user to execute the called transaction is not checked automatically. If the calling program does not execute a check, the called program must check the authorization. To do this, the called program must call function module AUTHORITY_CHECK_TCODE.
Addition 1
... AND SKIP FIRST SCREEN
Effect
This addition suppresses the display of a screen of the initial dynpro of a called dialog transaction. The addition AND SKIP FIRST SCREEN suppresses the first screen under these prerequisites:
For the initial dynpro, in the Screen Painter the own dynpro number must not be specified as the next screen number.
All mandatory input fields of the initial dynpro must be filled completely and with the correct values by the SPA/GPA parameters
If these prerequisites are met, that screen of the dynpro is displayed that is specified in the Screen Painter as the next dynpro of the initial dynpro.
Example
If the static next dynpro of the initial dynpro of the called dialog transaction FLIGHT_TA is not the initial dynpro itself, its screen is suppressed, because its input fields are filled using the SPA/GPA parameters CAR and CON.
DATA: carrid TYPE spfli-carrid,
 connid TYPE spfli-connid.
SET PARAMETER ID: 'CAR' FIELD carrid,
 'CON' FIELD connid.
CALL TRANSACTION 'FLIGHT_TA' AND SKIP FIRST SCREEN.
Addition 2
... USING bdc_tab [bdc_options]
Effect
Use this addition to pass an internal table bdc_tab of row type BDCDATA from the ABAP Dictionary to a dialog transaction. The additions bdc_options control the batch input processing. When a transaction with addition USING is called, the system field sy-binpt is set to value "X" in the called program - while this transaction is running, no other transaction can be called with this addition.
The internal table bdc_tab is the program-internal representation of a batch input session and must be filled accordingly. The structure BDCDATA has the components shown in the table below.
Component Description
PROGRAM Name of the program of the called transaction
DYNPRO Number of the dynpro to be processed
DYNBEGIN Flag for the beginning of a new dynpro (possible values are "X" and " ")
FNAM Name of a dynpro field to be filled or batch input control statement, for example, to position the cursor
FVAL Value to be passed to the dynpro field or to the control statement
Using the internal table bdc_tab, you can provide any number of screens of the called transaction with input and user actions.
System Fields
sy-subrc Description
0 The batch input processing of the called transaction was successful.
< 1000 Error in the called transaction. If within the transaction a message was sent, you can receive it using the addition MESSAGES.
1001 Error in batch input processing.
Note
Outside of ABAP Objects you can specify the additions AND SKIP FIRST SCREEN and USING together. However, this does not make sense, because the addition AND SKIP FIRST SCREEN is desigend only to fill the mandatory input fields using SPA/GPA parameters, while the batch input table specified with USING controls the entire transaction flow including the display of the screens.
Example
Call of the Class Builder (transaction SE24) and display of class CL_SPFLI_PERSISTENT. The internal table bdcdata_tab contains the input for the batch input processing of the first dynpro (1000) of the transaction. Using structure opt, the batch input processing is set to suppress the first screen and to display the next screen in the standard size.
DATA class_name(30) TYPE c VALUE 'CL_SPFLI_PERSISTENT'.
DATA: bdcdata_wa TYPE bdcdata,
 bdcdata_tab TYPE TABLE OF bdcdata.
DATA opt TYPE ctu_params.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLSEOD'.
bdcdata_wa-dynpro = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'SEOCLASS-CLSNAME'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'SEOCLASS-CLSNAME'.
bdcdata_wa-fval = class_name.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=CIDI'.
APPEND bdcdata_wa TO bdcdata_tab.
opt-dismode = 'E'.
opt-defsize = 'X'.
CALL TRANSACTION 'SE24' USING bdcdata_tab OPTIONS FROM opt.

How to access SQL tables from WebDynPro ABAP application ?

Hi,
I am trying a scenario, where I need to send an user ID to SQL server table (update/modify/delete) from webDynpro ABAP application.
Basically ,I am trying to know:---
a>How to write a SQL Connection from ABAP code within webdynpro ABAP application
b>What are the ways to do it.(by code or any other API/mechanism)
I appreciate if anybody knows this.
Thanks
Praveen

Hi,
The EXEC CONNECT ... is usually used in the procedural ABAP code. For this you can refer to the ABAPDOCU.
I dont have any sample code on the classes I listed try to check out them for the parameters and the methods they have.
In WD for Java, we have these connection classes to connect to any databsae server.
Or try to create an RFC with DESTINATION for this
Pls check out this link for this -
Pull data from another r3 server using abap dynpro
Regards
Lekha

How to read Filter selection variable values into ABAP code

HI IP Gurus,
Requierement: In my filter characterstics, i have assigned variables, which use will enter when running th e planning sequence.
so variable values entered by user , i would like to get those values into ABAP code and pass them to some function module.
SO please give me step by step detail how to achive this.
MY understanding use the below method . but not sure how to proceed.Please let me know abap code to get values.
GET_TAB_PARAM_DATA_SEL and GET_PARAM_DATA_SEL.
Please help me.
Thanks in advance.Will Assign points
Sania

Hi Srinivas,
So In RSPLF1 , in paramters tab, Do i have create structure(str1) and then create component Data selection (Dtsel1) under str1(what setting i have to do here, where should i enter variable value and do i need to give info object name and how do it in code.i tried to following example, not able to get any values in tab_sel .
It will be great, if you could explain in detail.
other thing i found out is in Initialization method i can read i_t_data_charsel table values , where it contains filter slected values.but could not pass these values to execute method
Is there is any way that i can pass values from init method to execute method.
A tabular structured parameter with name "MY_TABSTRUC" is defined for the function type. "MY_TABSTRUC" consists of the two parameter components "MY_ELEM" and "MY_DATASEL". You access the parameter values as follows:
DATA: TAB_PARAM_STRUC TYPE RSPLFA_T_PARAM_STRUC,
       REF_PARAM_STRUC    TYPE REF TO IF_RSPLFA_PARAM_STRUC,
      REF_PARAM_ELEM     TYPE REF TO IF_RSPLFA_PARAM_ELEM,
      REF_PARAM_DATASEL TYPE REF TO IF_RSPLFA_PARAM_DATESEL,
       L_VAL(20)          TYPE C,
       TAB_SEL            TYPE RSPLF_T_CHARSEL.
get table of parameter MY_TABSTRUC:
TAB_PARAM_STRUC = I_R_PARAM_SET->GET_TAB_PARAM_STRUC( 'MY_TABSTRUC' ).
process all lines:
LOOP AT TAB_PARAM_STRUC into REF_PARAM_STRUC.
get component MY_ELEM:
    REF_PARAM_ELEM = REF_PARAM_STRUC->GET_COMP_ELEM( 'MY_ELEM' ).
get internal value of MY_ELEM:
    REF_PARAM_ELEM->GET_VALUE( IMPORTING E_VALUE = L_VAL ).
get component MY_DATASEL:
    REF_PARAM_DATASEL = REF_PARAM_STRUC->GET_COMP_DATA_SEL( 'MY_DATASEL' ).
get data selection table of MY_DATASEL:
    TAB_SEL = REF_PARAM_DATASEL->GET_T_SEL( ).
ENDLOOP.
Thanks in Advance..please help me

Enhancement-ABAP Code-Customized Field issue

Hi Experts,
Currently I am working on the BW3.5 version. We are using the standard SRM standard extractor 0BBP_TD_SC_1 and we enhance same extractor(populate the filed through CMOD - ABAP Code) with one customized field also. We are having issue on the customized field data which post from SRM system. I have verified the field value and value is fine in RSA3 in SRM source system. But while posting into the BW(PSA itself), its loading correct & wrong value. When i check the PSA for the particular load, It looks little strange. In the PSA, I can see correct value on my first record of the same SC and then next records has incorrect value of the same SC. Currently I am using the ODS as a data target. So finally i am getting the incorrect value on the customized field.
Ex Scenario:
Ex Customized Field: ZORGID
In SRM source system RSA3 Extractor Checker value:
Shopping Card No: 100
Customized Field: ZORGID=1
Shopping Card No: 200
Customized Field: ZORGID=2
In BW posting-PSA:
Shopping Card No: 100
Customized Field: ZORGID=2
Shopping Card No: 200
Customized Field: ZORGID=2
At the same time, if i do the selective deletion of the particular Shopping Card or group of SC in BW and do the full repair, then it gets a correct ZORGID=1 for the same Shopping Card.
I strongly believe, something wrong in the ABAP code. But when we tried to debug the customized filed value in RSA3. The value is fine. so we unable to trace out the issue. Please help me to fix the code. Thanks in advance.
CMOD ABAP Code:
*Populate approver ID even though it doesn't require approval this is required to make sure BW reports have restrict access to respective Org Unit approvals only
IF l_s_bbp_sc-approver_id IS INITIAL AND l_s_bbp_sc-itm_guid IS NOT INITIAL.
CALL FUNCTION 'Z_BBP_FIRST_APPROVALGET'
EXPORTING
iv_header_guid = l_s_bbp_sc-guid
iv_itm_guid = l_s_bbp_sc-itm_guid
IMPORTING
approver_no = l_s_bbp_sc-approver_id
EXCEPTIONS
no_data = 1
OTHERS = 2
IF sy-subrc 0.
ENDIF.
ENDIF.
To ensure that the Org Unit passed in into the field
l_s_bbp_sc-zzapprov_orgunit belongs to the Actual Level 1
Budget Owner and not any other manager such as Added Approver.
CLEAR : ls_ln_approvers, l_userid, lv_bpartner_guid.
DATA : lv_f_apprv_part TYPE BU_PARTNER.
READ TABLE lt_ln_approvers INTO ls_ln_approvers
WITH KEY INITIAL_INDEX = '0000000001'.
IF sy-subrc EQ 0.
MOVE ls_ln_approvers-approval_agent+2(12) TO l_userid.
CALL FUNCTION 'BP_CENTRALPERSON_GET'
EXPORTING
iv_username = l_userid
IMPORTING
ev_bu_partner_guid = lv_bpartner_guid
EXCEPTIONS
no_central_person = 1
no_business_partner = 2
no_id = 3
OTHERS = 4.
IF sy-subrc = 0.
CALL FUNCTION 'BUPA_NUMBERS_GET'
EXPORTING
iv_partner_guid = lv_bpartner_guid
IMPORTING
ev_partner = lv_f_apprv_part.
ENDIF.
ENDIF.
We get the BP number of the first Budget Owner 1
Here, we superseed the field l_s_bbp_sc-approver_id
whereby it may be wrong due to Added Approver.
IF l_s_bbp_sc-approver_id IS NOT INITIAL.
IF lv_f_apprv_part IS NOT INITIAL.
IF l_s_bbp_sc-itm_guid IS NOT INITIAL.
CALL FUNCTION 'RH_STRUC_GET'
EXPORTING
act_otype = 'BP'
act_objid = lv_f_apprv_part
act_wegid = 'EBP-UP'
act_begda = sy-datum
act_endda = sy-datum
act_tdepth = 4
TABLES
result_tab = lt_result_tab
EXCEPTIONS
no_plvar_found = 1
no_entry_found = 2
OTHERS = 3
IF sy-subrc = 0.
READ TABLE lt_result_tab INTO ls_result_tab WITH KEY
otype = 'O'.
IF sy-subrc EQ 0.
l_s_bbp_sc-zzapprov_orgunit = ls_result_tab-objid.
ELSE.
ENDIF.
ENDIF.
ENDIF.
Thanks,
RR

Hi Experts,
Any suggestions. Thanks.
Thanks,
RR

How to do scheduled SFTP through an ABAP code

Similar Messages

Maybe you are looking for