How to Create a New Software Component

Dear All,
I am trying to prepare a list of steps to develop add-on products over SAP ECC 6.0. I was just wondering how to create a Software component for my namespace development, which I would like to assign my development package to.
Any ideas or guidance is highly appreciated.
Regards
VG

Hi VG,
I think I am just facing the same issue right now. Like you we do not want to do XI/PI development. We registered namespace and starting on developing a product based on ECC, which should be on a seperate namespace. We have read of AddOn Assembly Kit, but we don't have it for th emoment. We might have it at a later stage.
Still we would like to create an own Product and SC for shipment purposes. We created Product and SC in SLD but we are not able to select it in the SE80 dialogues of creating development objects. We haven't found away or documentation on how to sychnronize the SCs from SLD to ABAP system.
Is it possible to create SCs in the systme directly which will then show up for development objects?
Is it mandatory to have the Assembly Kit? (costs good money)
Is it possible to do all that in a later stage? (we saw it's possible to reassign SC for dev ojects)
I know it's been quite some time, I would still highly appreciate a feedback as SAP docu is very limited.
best,
Stefan

Similar Messages

Create a new software component release in sld

hi,
i have a software component ABC whose version is 1.0 and vendor is SDN
software component: ABC
vendor: SDN
version: 1.0
now I created a new software component like
software component: ABC
vendor: SDN
version: 2.0
but in the SLD, when I check the release history tab of one software component, there is no any information about the release relation between these two software component.
Does anyone know how to make it?
Regards,
Hui

Hui,
Please check this michals weblog for any dependencies:
/people/michal.krawczyk2/blog/2005/08/26/xi-are-you-independentfrom-your-dependencies
---Satish

How to create a new component using SPICE?

People, I don't know how to create a new component using SPICE.
I know that it's possible to create a new component and use a SPICE code, but I don't know how to do this very well, and I need the TI ISO124 (Isolation Amplifier), and I have no idea on how to do that. Can somebody help me? I need to develop a layout.
Thank you!!

Hi,
Here is a tutorial that explains in details how to create your own component in Multisim using a SPICE model.
Hope you find it helpful,
Mahmoud W
National Instruments

Creating a new software instrument track in Logic Pro 9

When I create a new software instrument track in Logic 9, the newly-created track always defaults to "EVP 88 Electric Piano" instead of "Inst 1" like it's supposed to. Why does Logic do this and how can I restore the settings so that it opens the new track as "Inst 1."
Thanks much!!
Alex

That was added around 9.1.1 - presumably so people wouldn't create an instrument and then ask "I created an instrument, but it don't make no sound."
You can uncheck the open library box or go to HD>Library>App support>Logic>channel strip settings>Instrument>01 Logic instruments and change the one called something like "EVP88 Electric Piano" to just "Electric Piano."

How to create a new tag in page properties in the sidekick of geometrrix page

how to create a new tag in page properties in the sidekick of geometrrix pagesame as basic, advanced, blue print??

Hi prachi,
Is it tag OR Tab ? Seems like you are looking for Tab. Look at [1] & overlay to custamize per your need. Or define at your page component.
[1] /libs/foundation/components/page/dialog/items/tabs/items
Thanks,
Sham

Can not change vendor when creating a new Development Component in NWDS

Dear friends,
Im trying to create a new Development Component in NWDS. Our NWDS is connected to NWDI and we are using CM Services option of NWDI.
Before I could create a DC and change the vendor but now I cant change it anymore. Now, the vendor is by default sap.com and we cant change it and it seems that we also have to put our project in a separate directory. home/ directory or other directories in the list.
See below screen shots...
If I make a new DC than we see it like this: home/bpm_test [sap.com].
If I make a new DC in my LocalDevelopment I can change the vendor and I dont have to choose a home directory.
Do you have any idea how to change that?
Any help would be greatly appreciated.
Thank you in advance,

HI,
it seems that the vendor is defined in the NWDI track. That's why you can't change it.
regards,
Vasils

How to create a new System Data

Hi guys.
I need to create a new System Data with which to filter a list output using a field derivated from siebel marketing. This data isn't between the standard system data like CampaingCode, SegmentId .....
Now i discover one .XML file (someting like Marketing....xml), in the OracleBIData/web/config directory, in which there are defined all the standard System data like:
<WebExpression>
</WebExpression>
Can I try to modify this file and add a new system data? if the answere is YES, hao i can do this? My real problem is how take a system value, from siebel marketing, to assign at this new systme data.
Thanks in advance
Best reguards

Hi
thanks for your solution,
i created a new Data carrier type AC for viewing auto cad files and given the path as, C:\Program Files\AutoCAD 2006\acad.exe"
and at Define serveres and files or folders,
defined the data carrier as Autocad type was default as AC,
at Identify frontend computers i could not enter any thing it is only in display form and no values were there and niether could be entered.
and my datacarrier created is not there to be selected while creating documents.
through CV01N create documents.
i suppose this is because i have already defaulted PC as the data carrier type. default system as my data carrier.
please clarify my Below douts also
as in my configuration i have defined only one Datacarrier ie Default PC, will this do all the need full, or will lead to to any complication in any aspect,
i want to know what is the Advantages of defining many datacarriers or the Limitation of a single Datacarrier.
iam facing a situation where a particular software say PDF reader or AutoCAD, is not installed in all the System. and iam thinking of installing this Software in a particular System or say in the Content Server system.
can this software be made used to view these cad and Pdf files on the front end system where this software is not installed,
Say in a particular PC the software AutoCAD is not installed and if he wants to View the AutoCAD file,
another problem iam facing is
while Creating a New AutoCAD file in my system through DMS Create, it gives a message "Drawing file is not Valid"
while i can create a Word Doc File, but it is not possible to create a new AutoCAD file throuh DMS, (AutoCAD is Installed in my system)
also i have no idea of how to create a New Data carrier type,
what exactly have to be filled in
1, define data carrier type
2, define server and files or folder
3, identify frontend computers
please provide configuration details or if possible screen shot details
points will be awarded for sure.
Thanks and Regards
Sathish

How to change name of software component version in IR and ID?

Hi All,
I have a scenario in which 50 interfaces are there.All interfaces are working fine and we are in Testing stage.
I need to change name of Software component which I have used in IR.
I tried with release transport. I am able to pass all my mapping programs and everything under new software component name. But in ID all configuration objects contain IR objects (Like interface mapping) with old software component name.
Do I need to change everything in ID manually or is there any other way for this?
Thanks in advance.
Warm Regards,
Gouri

Gouri,
If you check this blog , you are able to transfer data even without IR content, i.e, there is no message interface , no namespace in IR and stil this works. Reason, there is no validation if the message interafce exists in the IR. In the runtime the SOAP Header is filled with the interfacename and namespace and it uses these values.
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
Likewise, irrespective of which SWCV the interface name and namespace is, things will work fine as long as they exists in the IR in your case.
The SWCV is a means to group objects, it might be displayed while doing the manual configuration but it doesnt matter even if you just key in the values without using the help.
Things will work fine.
Regards
Bhavesh

How to delete/remove the software component from integration repository

Dear All
How to delete/remove the software component from integration repository which we have created some Data and message types.
Regards
Blue

Hi,
Follow the steps below to delete the Software component:
1. Delete the created Data Types, Message Types, Message Interfaces, Message Mappings, Interface Mappings and other imported objects like RFC's or IDoc's. Activate all changes.
2. Then delete the namespace and the default datatypes present with the namespace after checking "objects are modifiable".
3. Then delete the SW component, after placing the radio button in "Not permitted".
Regds,
Pinangshuk.

How should I add a Software Component in the Integration Repostory?

What should I do in the SLD and in the IR in order to add a new Software Component in the Integration Repostory?

Hi Javier,
Create a new s/w compnent in SLD first.
In IR go to menu Tool ->Transfer from SLD->Import S/w component.
Select the S/W component u created and import in in IR.
Thanx
Rekha.

How to Create a new column from two different result sets

How to Create a new column from two different result sets, both the result set uses the different date dimensions.

i got solutions for this is apply filters in column formula it self, based on the requirement.

How To Create The New VO in Standered Page?

Hi Gurus,
Pl z help me how to create the new Custom VO in slandered page,and how to attach that VO in custom RN in all are slandered page only.
Regards,
Srini

Hi Sara,
1. Could you please tell me how to create the new webservice in XI?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f3ee9d7-0901-0010-1096-f5b548ac1555
2. What tools we have to use to create it.?
/people/community.user/blog/2006/09/19/xi-webservice-studio--a-plain-jane-soap-tool
http://www.gotdotnet.com/Community/UserSamples/Details.aspx?SampleGuid=65a1d4ea-0f7a-41bd-8494-e916ebc4159c
Altova is also a good option
3. How to send the SOAP request to XI?
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
SAP Note 856597
An Add-on
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
Regards,
Prateek

How to create a new connection from SAPGUI to Test drive?

Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh

>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh

How to create a new facebook account in iphoto?

How to create a new facebook account in iphoto?

Instructions can be found by selecting iPhoto Help from the Help menu within iPhoto.

How to create a new field for Q3 - QM notification in Header and item level

Dear All,
l
Sub: How to create a new field for Q3 - QM notification in Header and item level
Ref. the link --> Quality Notification
We want to create a new field in header level and item level.
As per the thread the solution is given below.
In the IMG Config: Quality Management -> Quality Notification -> Notification Types -> Define screen areas for notification types Then Choose 'Define screen areas' Then Click on 'New entries' button Now, select the relevant Notification Type and click in 'Enter'. Select the 'Iten Cases' register and remember to setup the Tabstrip Header, Icon, etc. Set the 'Tabstrip active' flag. Then Save.
Quality Notification -> Notification Types -> Define screen areas for notification types
WE ARE UNABLE TO FIND IN CUSTOMIZATION PATH --> DEFINE SCREEN AREAS FOR NOTIFICATION TYPES.
Please help.
Question No. 2 :
THE REQUIREMENT IS GIVEN BELOW.
We want to hide the field in Q3 - QM Notification
In header --> Reference tab --> Item (sub heading) --> "DEFECT LOCATION" FIELD TO BE ELIMINATED (HIDE)
Ref the link --> Quality notification
The solutiion is given below.
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
By double clicking the "DEFECTIVE QUANTITY (EXTERNAL), WE COULD NOT GET --> field TXTCDOT .
Plese do the needful.
We are using ECC6.0 Ehp3 and Ehp4.
With Best Regards,
Raghu Sharma

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

How to Create a New Software Component

Similar Messages

Maybe you are looking for