How to disable the Export process

Hi Guru's
We have an FDM application which requires certain locations to only proceed as far as the validate stage. We would like a simple method of disabling the export process.
Locations which meet this criteria are held within specific control groups and have specifically formatted location names which makes identifcation via script very easy. For example all such location end with "_PADJ". A pre-export event script can test and trap this condition but I can find no reference as to how the export process that has been started can be terminated through the API.
Any advice greatly appreciated

Create a second target adaptor and assign it to these locations. Under the integration settings for this adaptor, uncheck the "Enable Load" option.
Please be sure to flag correct & helpful responses so others may benefit

Similar Messages

How to Disable the Process Header, collapsible Area, and Process Warning Bar from Contacts Form of CRM 2013

Folks,
How to Disable the Process Header, collapsible Area, and Process Warning Bar from Contacts Form of CRM 2013
Thank you.

Hi,
You can deactivate the business process itself if you do not want at all. So that the header will not available for the entity.
Regards,
Priya

How disable the export feature in Discoverer

Hi there,
I appreciate if someone can help me in these two subjects, well
1- For security purposes I wish to disable the export option from Oracle Discoverer V
10g. Can someone please help?
2- Can in get a full log file about all activities performed during session login?
Thanks

Hi,
You can remove the link of the export.
log in to the enterprise manager, go to Discoverer->Discoverer Viewer
go to the customization tab, in the drop down list change to "Layout" and press the "GO".
it the "action links" you will find a check box for the "Export" Remove it.
You may nee to restart the application or clear cache.
Good luck
Tamir

Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size

Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size to 7 inches on the long edge. My exported result is 457 dpi and sized at 3200x2134 pixels.. Any ideas on why this is happening and what I can do to correct it?

The DPI setting in a digital image has no meaning at all. You need to learn how to calculate what you need in your exported image. The only measurement in a digital image that has any meaning is the number of pixels in each direction. It doesn't matter what you set that DPI to (actually it's PPI or pixels per inch). The image will have the same number of pixels regardless of the setting. If you need an image that is 5 x 7" (for example) at 200 PPI then you would want an image that measured:
5 x 200 = 1000 pixels
7 x 200 = 1400 pixels
So you would need an image that is 1000 x 1400 pixels to have a 5 x 7" image at 200 PPI. The reason your exported image had such a high PPI setting is because you specified the number of inches you wanted the image to be. And there were enough pixels in the image that it calculated out to be that high PPI setting.
I apologize, I don't explain this very well. But you need to learn to do the math to determine how large you really want your exported images to be.

How to disable the button in application toolbar in report pgm

Can anyone help with How to disable the button in application toolbar in report pgm

Hi,
You can use it_excluding to disable button on the tool bar.You have to find the function code for the required button and append that function code to the it_excluding .The optional IMPORTING parameter IT_EXCLUDING is an internal table. It is only needed if the caller uses the list tool standard interface but wants to deactivate interface functions which he or she does not need.You can have your defined pf-status using I_CALLBACK_PF_STATUS_SET.
SAMPLE PROGRAM
tables spfli.
type-pools: slis.
DATA W_FCODE TYPE SLIS_EXTAB-FCODE.
data: t_spfli TYPE SPFLI OCCURS 0 WITH HEADER LINE.
select * from spfli into table t_spfli.
data : t_excluding TYPE SLIS_T_EXTAB .
W_fcode = '&OUP'.
append w_fcode to t_excluding.
W_fcode = '&ODN'.
append w_fcode to t_excluding.
call function 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_STRUCTURE_NAME = 'SPFLI'
IS_LAYOUT =
IT_FIELDCAT =
IT_EXCLUDING = T_EXCLUDING
tables
t_outtab = T_SPFLI
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
http://help.sap.com/saphelp_nw2004s/helpdata/en/99/49b844d61911d2b469006094192fe3/frameset.htm
Regards,
Priyanka.

Is it possible to disable the Export Application Button/functionality

Hi fellows,
I need to disable the export button/functionality in a customer's apex installation (3.2.1) as part of the security measures.
Customer do not want developers to be able to export the applications they have access to. As the internal application is not editable (is it with some sort of trick??) , does anyone ever had this requirement and know how to do it?
Thanks in advance for your support.
JP

Hello,
>> I need to disable the export button/functionality in a customer's apex installation (3.2.1) as part of the security measures.
>> this need applies for both development and production enviroments although if a solution is available, it will be first tried in the development enviroment.
I agree with Tyler, this is indeed a really strange request. If your customer can’t rely on his developers, I would say you have a problem. I’m saying it because disabling the export button, even if it’s possible, doesn’t really give you any kind of protection. A malicious developer can still export APEX application using the Java utility APEXExport; it can be done with SQL Developer; it can also be done on a page level, and I only named the documented options.
I don’t think this type of action should be considered for a development environment. Of course, the production environment is a completely different ball game. You can use the APEX run-time only environment, and by that neutralize most of the developer related “risks”.
Just my 2 ¢,
Arie.

I have changed the apple ID (email, but on my iphone , the icloud is stil asking me to log in whit the old email.And it is poping-up on every 10 seconds.I never used icloud, and i dont want to use it.I just dont know how to disable the icloud.

i have changed the apple ID (email) but on my iphone , the icloud is stil asking me to log in whit the old email.And it is poping-up on every 10 seconds.I never used icloud, and i dont want to use it.I just dont know how to disable the icloud.

If you see that pop up you enabled icloud. Whether you want or do not want now to use it irrelevant until you actually disable activation lock.
In order to do that you have to change your apple id back to do that just long enough to sign in and back out. System will ask you to verify, don't.
Just sign in on the prompt you getting and then logout. Once done, change apple id to what you have now and verify. Then decide if you want to
use icloud (who does not want to be able to track their phone if lost or stolen).

I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update

I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update so I can use the store.

If Software Update is offering the update then it would be compatible with your model. Unfortunately, you haven't provided us with any information on your hardware that would enable us to determine if it really is too old.
If you really wish to disable the update alert then the next time Software Update opens, select the update in the list then select "Ignore update" from SU's Update menu.

How to disable the reminding dialog when close the webi report viewer

Dear all
How to disable the reminding dialog when close the webi report viewer
Background
When user close the webi report viewer in inforview by click the button in the right-top of the webi report viewer frame. It always prompt a dialog to remind user that the modification will be lost without saving.
But customer need to disable this dialog, and can clost the report viewer directly.
So is there any ways to modify this?
I think it shoule modify some .js file under tomcat, but can not find the solution.
Thanks a lot, any information woulde be appreciated.
David Zhang

I've had the same issue bugging me since installing Snow, er, lion, er, cat, er, cougar, er, Mountain Lion. Incredibly ANNOYING.
It's stupid stuff like this and reverse scrolling that really turn long-timer users off. I'm personally glad Forstall got fired for blunders such as these.
I'm serious peeved that turning off iCloud Documents & Data actually deletes documents and data locally. That's just incredibly stupid.
MANY thanks mende1 for the answer on how to fix it.

How to stop the running process chain

How to stop the running process chains or infopackges...just qm status change is enought?

BI - SM 37 - Kill the Job
ECC - SM 50 - Kill the job

How to stop the backup process....

How to stop the backup process....
Okay, so it happens nearly everytime you synch your iPhone with your iTunes? Easy. As soon as it starts, hit the "X" in the bar where the backup process is being shown, this does NOT STOP the synching process, ONLY the backup process.
HOWEVER, keep in mind that a few times during the week (depends how often you synch ur iPhone) it will be good to let the backup process let run fully.
There we go. Problem solved...

i agree its what i do i backup whenever i add a new app, or take more pics etc its exactly what i do its what ive been saying on all these threads talking about backups etc, im hoping in 2.0.1 will be bug fixes about this sort of thing...

How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID promts the previously used email user IDs... Want to disable this feature---How can ot be done ?

Question
How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID prompts the previously used email user IDs... Want to disable this feature---How can it be done ?

*Click the (empty) input field on the web page to open the drop down list
*Highlight an entry in the drop down list
*Press the Delete key (on Mac: Shift+Delete) to remove it.
*http://kb.mozillazine.org/Deleting_autocomplete_entries
* Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
* Tools > Options > Privacy > History: "Remember search and form history"
* https://support.mozilla.com/kb/Remembering+passwords
* https://support.mozilla.com/kb/Form+autocomplete

How to disable the purchase function?

Anyone know how to disable the purchase function from the ipad2? How to disable and empty the payment credit card inform? If not, is it secure?

None for payment
After establishing the Credit Card account (i.e. after you have made purchases), you can remove the credit card information by editing your payment info, choosing "None".

How to get the all process orders and outbound deliveries based on material

Hi Team ,
I need one help from you regarding the MB 56 transaction.
My doubt is : How to get the all process orders and outbound deliveries based on material, plant and batch?
Please help me regarding this.
Thanks & Regards,
Srikanth.

Hi,
You can use ST05,to trace the program and find out,
hope it will help you...
thanks and regards,
veera.

How to disable the selection of "Title and logo URL of a SharePoint 2013 site" from browser

how to disable the selection of "Title and logo URL of a SharePoint 2013 site" from browser or How can we able to set our custom default log to the sp2013 site using code.So that users are not allowed to change from browser again.
Thanks & Regards, Krishna

Hi Krishna,
For your issue, you need to deploy a farm solution using HideCustomAction to hide site settings link. For example to hide “Title, description, and logo” link you can use below code:
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<HideCustomAction
GroupId="Customization"
HideActionId = "ProjectSettings"
Location = "Microsoft.SharePoint.SiteSettings">
</HideCustomAction>
</Elements>
Reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/92f002b7-0e9c-424e-836a-de40c4e5d81f/hide-option-from-site-settings-page-in-sharepoint-2010?forum=sharepointdevelopmentprevious
http://blog.milanchauhan.com/2013/06/add-custom-section-in-site-settings.html
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to disable the Export process

Similar Messages

Maybe you are looking for