How to stop the backup process....
How to stop the backup process....
Okay, so it happens nearly everytime you synch your iPhone with your iTunes? Easy. As soon as it starts, hit the "X" in the bar where the backup process is being shown, this does NOT STOP the synching process, ONLY the backup process.
HOWEVER, keep in mind that a few times during the week (depends how often you synch ur iPhone) it will be good to let the backup process let run fully.
There we go. Problem solved...
i agree its what i do i backup whenever i add a new app, or take more pics etc its exactly what i do its what ive been saying on all these threads talking about backups etc, im hoping in 2.0.1 will be bug fixes about this sort of thing...
Similar Messages
-
How to stop the running process chain
How to stop the running process chains or infopackges...just qm status change is enought?
BI - SM 37 - Kill the Job
ECC - SM 50 - Kill the job -
How to stop the upload process?
Hi,
i had by mistake started the other upload than the required!
How to stop the current upload process,( generally it takes lot of time to upload the data as data is huge )
Thanks,
RaviHi Ravi Kottur
Just follow the things like Sunil suggested check one more just kill the process
manually and goto RSMO and in the Monitor QM status just Amke it red manually
for the load which you want to stop and then go to that particular info provider
Manage and delte the request..
Hope itz clear a little atleast...!
Thanks & Regards
R M K
***Assigning pointz is the only way of saying thanx in SDN ***
**Learning the thingz is never end process if u stop it will Be a devil if u continue it will be a divine***
> Hi,
>
> i had by mistake started the other upload than the
> required!
>
> How to stop the current upload process,( generally it
> takes lot of time to upload the data as data is huge
> )
>
>
> Thanks,
> Ravi -
PFRD 11.1.1.4 - How to stop the In-process Reports Server
I'm running an "out-of-the-box" PFRD 11.1.1.4 installation in Windows XP SP3.
According with documentation:
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt006.htm#BEHDJFHD
To directly start or stop the in-process Reports Server using a URL, enter the following in your Web browser:
http://machine_name:port/reports/rwservlet/startserver
http://machine_name:port/reports/rwservlet/stopserver
startserver works.
stopserver returns:
REP-50171 : Authentication failed.
Tried
http://machine_name:port/reports/rwservlet/stopserver?authid=weblogic/passwd
same error.
Commented the line:
<!--security class="oracle.reports.server.RWJAZNSecurity" id="rwJaznSec"/-->
in rwserver.conf.
Same error.
The only uncomented elements in "rwservlet.properties" (original configuration) are
<server>rep_wls_reports_pfurtado-lap_asinst_1</server>
<singlesignon>no</singlesignon>
<inprocess>yes</inprocess>
Did any of you managed to stop "in-process" reports server using the reports servlet?
What credentials did you use?
Thanks & Best Regards
PauloThanks RZ!
The line you mentioned was already as you described.
According with the documentation:
[Starting and Stopping Reports Server|http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt001.htm#i1005629]
If Reports Server is running as an in-process server through the Reports Servlet, issue the following URL:
http://your_host_name:port_number/reports/rwservlet/stopserver?authid=admin user/admin password
Note:
authid is Reports Server's administration user name and password. In Oracle Reports 11g Release 1 (11.1.1), the default security is based on standards-based Java EE security model through Oracle Platform Security Services. For a non-secure Reports Server, this user is defined in the identifier element.
I added the identifier element to rwserver.conf and restarted WLS_REPORTS, but after this the in-process reports server failed to start with the usual generic exception.
I finally found the missing step in:
How To Secure Showjobs Web Command In A Non Secured Reports Server In Oracle Report 11g? (Doc ID 1242614.1)
The thing is that the identifier element has to be placed in the right location inside rwserver.conf:
The needed change is:
FROM
<queue maxQueueSize="1000"/>
<pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
TO
<queue maxQueueSize="1000"/>
<identifier encrypted="no">....type here your user/password....</identifier>
<pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
So although using the default non-secure reports server, the identifier element has to be present in rwserver.conf for rwservlet/stopserver to work as described above.
Otherwise the needed authentication will fail as described.
Regards
Paulo -
How to stop running Backup process by BRTOOLS ?
Dear All,
We r using HP-UX -- OS for SAP system. We run backup process by DB13 TC.
once the backup started, we can not log in till backup process ends.
If we want to stop this process in between then how to stop BACKUP process safely ? We have to use BRTOOLS ?
Pl' give right method ..............Hi,
Just confirm whether you are doing a disk to disk backup or disk to tape backup.
Disk to Disk - It copies the files from oraarch filesystem to logbackup, and sapdata1,2,3... to sapbackup filesystems respectively. This is scheduled through brtools (DB13). This affects the performance tremdrously.
Disk to Tape - This takes all the files from sapbackup and logbackup filesystems to tape. this doesnot affect the performance.
We can kill the backup scheduled by brtools,because there is always a background job is triggered for the backup, the jobs always start with DBA*. Then kill that job, with help of pid from SAP level or OS level. but I doubt that the stopped backup can be used for recovery for future use.
With regards
Sudha -
11G R2 How to stop the backup job totally
I have a third party application connected to 11G R2 database and is having issue every morning at 2. After applying the patch from the third part application, most of the issues are resolved. Unfortunately, I still get an ORA-12528 error - Failed to connect to database instance. Look like the third party application is having issue with the backup job. I have tried the command "alter tablespace tsname flashback off", but I check the alert log, the backup job is still running. I may have turn on the backup job during the database installation. How do I stop it?
Thanks for any help!
- JohnnySorry, I forgot to add "alter database flashback off "command on top of the other one. The third party application is basically a monitoring and scheduler tool. It uses JBOSS and TOMCAT connecting to the database using both jdbc and odcb. It doesn't store a lot of data. Here is the alert email I got this morning:
Target Name=MEDIAMGR
Target Type=Database Instance
Host=mediamgr2-db
Metric=Status
Metric Value=0
Timestamp=Jan 4, 2012 2:01:12 AM PST
Severity=Critical
Message=Failed to connect to database instance: ORA-12528: TNS:listener: all appropriate instances are blocking new connections (DBD ERROR: OCIServerAttach).
Notification Rule Name=Database Availability and Critical States
Notification Rule Owner=SYSMAN
Notification Count=1
as for backup, I have already disabled the archive logs and flashback database. A few minutes ago, I just turn off RMAN autoback. What else can I turn off related to backup?
Thanks,
- Johnny -
How to stop the boot process after the GRUB menu?
Hello there.
I am getting an error message in the boot process, after the GRUB menu, but I can't read completely the message because it is shown too fast. So, how can I stop the process when I see the error message, for writing down it?
Thanks in advance.zuargo wrote:
Hello there.
I am getting an error message in the boot process, after the GRUB menu, but I can't read completely the message because it is shown too fast. So, how can I stop the process when I see the error message, for writing down it?
Thanks in advance.
I didn't try this before, but if you use systemd, you may want to try systemd.confirm_spawn to invoke interactive booting process, so you can start the services one by one manually therefore locate the one throwing out error message.
It is explained in the systemd manual:
http://www.freedesktop.org/software/sys … stemd.html -
My backup to iCloud seems to be taking so long, I don't even have any confidence that it is working. Going on 16 hours. I want to use my phone, but it says if I stop it will return my phone to initial state. Do I lose all my apps?
Welcome to the Apple Community.
The first back up to iCloud may take some considerable time. Just how long isn't really possible to say without knowing how much is in your back up and your connection speed.
What many people don't realise is that upload speeds are often significantly less than download speeds, so for example a user may have a download speed of 40 Mbps, but only 1 Mbps for uploading. As a rough guide it will take around 2 ¼ hours to upload 1 GB of data at 1 Mbps. -
An error ocurred while installing os x - how to stop the upgrade process?
Hello:
I tried a lot of ways, entered on safe mode and redownloaded the upgrade, booted on recovery mode to check the disk (no errors), restarted the upgrade several times, I erased /Library/Updates... all of these I did several times but no luck...
How do I get it to stop trying to ugrade on reboot? the only way I can get into the old os is in safe mode, righ now i only want to get into the old os ... Any advise?Hello:
I tried a lot of ways, entered on safe mode and redownloaded the upgrade, booted on recovery mode to check the disk (no errors), restarted the upgrade several times, I erased /Library/Updates... all of these I did several times but no luck...
How do I get it to stop trying to ugrade on reboot? the only way I can get into the old os is in safe mode, righ now i only want to get into the old os ... Any advise? -
HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?
HI ALL,
CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
THANKS
HARITHAHi,
First and foremost let me advice you to be very careful while doing this.
For Rescheduling
RSPC> chain > Goto > Planning view and
click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
For terminating active chain
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Re: Kill a Job
Re: Killing a process chain.
Regards,
JituK -
How to stop the process chain showing status as yellow but no process step
Dear Friends,
How to stop the process chain showing status as yellow but no process step is running in that process chain.
We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
Please guide me.
Thanking you in advance.
Regards,
ShubhangiHi,
At times even I have faced this situation. During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
Regards,
Raj -
How do I stop the login process when I open iTunes?
How do I stop the login process when I open iTunes? It often request I login sometimes twice.
I amhaving the same issue of having to log into my apple account wheever I open I-Tunes. In my iTunes sharing my password requirment is unchecked and in filevault it is unchecked also. I have just upgraded to the newest version of iTunes and I still get the pop-up window asking me to login.
Any other thoughts?
thank you -
How to stop the duplicate idoc processing ? whar need to done SAP R/3
Hi All
If the Same Idoc is processed to SAP R/3 then what to do for not processing
the duplicate IDOC ?
Or some thing like this...
If by mistake same idoc processed then how to avoid to process the idoc?
what i need to in SAP R/3 side?
Regards
Kiran lvsHi
some thing like this:Using T.code: we19 ...Idoc processed a day ago
today by using the same t.code we19 ..processed the
same idoc, what i sent a day ago.
Here how to stop this duplicate processing ?
I hope this is clear...else pl put a note
regards
Kiran lvs -
CS6 3d: how do I stop the rendering process?
How do I stop the rendering process in CS6 3d? You used to be able to just click the mouse.
Steve:
Thanks for working with me on this. I'm not much of a techie, so bear with me. This is the info I think you were referring to. If it's not, just let me know and I'll try and get it.
Hardware Overview:
Model Name: iMac
Model Identifier: iMac10,1
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory: 12 GB
Bus Speed: 1.07 GHz
Chipset Model: ATI Radeon HD 4670
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x9488
Revision ID: 0x0000
ROM Revision: 113-B8030C-253
EFI Driver Version: 01.00.367
If you have any questions or concerns please don't hesitate to contact me.
Dennis -
How can we stop the Collapse process in process chain.
hi
guys
How can we stop the Collapse process in process chain.if any one know's plz tell me
your regards
sureshHi,
All the above post duly suggest a the methods we usually follow to cancel a collapse request i.e sm37 ---> Cancel without core,but these solution only applies if we are running collapse as a seperate variant in the process chain, in case its running as a part of change run the all above process will lead to the locking of the target.
In that case if you could "lock the target" even before the collapse ran will result in the "Stopping of the collapse on the target automatically" .
As far as figuring out the exat job of the collapse, you can directly get the job details in the "display message' , context menu option of the "Collapse variant" in the chain, clicking on the batch monitor and then clicking on the job to get its detail,then going to the specific "Application server " via SM51 and cacelling the job.
Do check wearther the target is unlocked or not in sm12 if not then choose the object in se03 and select "Unlock".
Hope it will serve yoour purpose
Thax & Regards
Vaibhave Sharma
Maybe you are looking for
-
Checking to see whether a user exists in a Windows Active Directory
I have a little java applet that has to run through a large list of users, and for one of its tasks, it has to check to see whether that user exists. Mostly this is the same as running with local users, with the one exception that I can't just check
-
Error when using LOV wildcard(%) in custom web ADI
Hello, I'm getting the following error on a custom Web ADI integrator. There are a number of LOVs on the form, and they're all working fine except one. The LOV is populated correctly, however, once the wildcard (%) search is used, the following error
-
Hello All, I have installed a new Database and importing a Datapump dump into a newly created schema. The data is around 150 GB . When i invoked the imprort Data wash pumped in just two hours whereas the index creation part is taking longer than usua
-
Signature Scribble value MUST empty
Sample File [HERE] I want to make the Signature Scribble field EMPTY once the client empties Printed Name or Date. By result Invisible and Disabled it does not remove the value; it hides and make the field invisible only, but once Printed Name and Da
-
Hai, I have created Journal Voucher using Code.I want the last created Journal Voucher No. How to get it? Thanks in advance.