How to disable/uncheck IPv6 in network adapter properties

Hi,
I need to programmtically disable/uncheck IPv6 during all Windows 7 deployments. Does anyone know where to find this in the registry or is there a Microsoft utility you can can use to achieve this?
This is what I'm talking about:
Open Network and Sharing Center
Click Change adapter settings in the upper left
Right click Local Area Connection
Choose Properties
On the networking tab, look for Internet Protocol Version 6 (TCP/IPv6)
I need to uncheck the checkbox on that line item
Thanks a lot for your help!
Rob

Microsoft has a command line program nvspbind (http://archive.msdn.microsoft.com/nvspbind), that can disable ipv6 on a specific interface. It seems to be identical to unchecking the
IPv6 box in adapter settings dialog. You can launch this program from a script or your program.
The command line arguments to disable IPv6 on a particular interface is:
nvspbind -d {GUID} ms_tcpip6
Rohit Harnikar MCSE (Exchange) 2003

Similar Messages

Disabled my Win2003 DC Network adapter by fault and cannot login locally to enable it again

Disabled my Win2003 DC Network adapter by fault and cannot login locally to enable it back again

Hi,
Agree with Darshana. For the detailed procedure, please refer to the link below:
https://technet.microsoft.com/en-us/library/cc776568(v=ws.10).aspx
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How To Disable A Wireless Printer Network Setting (SSID) On A HP L7700

How To Disable A Wireless Printer Network Setting (SSID) On A HP L7700 Previousley Set Up

Hello @flamek2,
Welcome to the HP forums.
I understand that you are trying to disable the wireless settings on your Officejet pro L7700 series printer.
I would like to help.
To erase the printers network information, go into the Setup menu.
Then go into the Network menu.
Select restore network defaults.
If you want to disable wireless altogether, then go into setup and choose network.
Select wireless radio, and turn it off.
Hope this helps you.
If you need any additional assistance please let me know.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

How to install microsoft hosted virtual network adapter

I have a HP 20- A225IN windows 8.1 All in one PC
I accidentally uninstall the Microsoft hosted virtual network adapter from Network Adapters under Device Manager.
please tell me how to install this adapter again?

I have a video that covers the steps to install the Microsoft Loopback Adapter in Windows 7. Hope this helps...
http://www.youtube.com/watch?v=R9674zGHxrE
Guides and tutorials, visit
ITGeared.com.

HOW TO RESOLVE(Test failed: The Network Adapter could not establish the connection)

Hii
I want to create new databse as sysdba in jdev.I followed the steps as given in
Oracle JDeveloper 11g Release 2 Tutorials - Designing and Building Database Tables
In step 7 create database user and database connection, I am not able to do that and getting the error
(Test failed: The Network Adapter could not establish the connection).
Please help me.

Hi,
Could you please provide all value you pass to the connection properties on the connection creation panel? First of all, you should choose "Generic JDBC" as the connection type in order to use BDB SQL JDBC driver.
Regards,
Cindy

Network Adapter Properties Advance tab (Roaming Aggressiveness)

Hi All,
we need to change wireless network adapter (Intel Chipset) properties - advance tab - Roaming Aggressiveness from the default 3 medium to 4 Medium high
How do i do this using GPO? please help.
Thanks.

I was able to successfully force this setting via GPO for Computer Configuration, Startup Scripts:
Computer, Configuration (Enabled), Policies,
Windows Settings, Scripts,
Startup
For this GPO, Script order: Not configured
Name
Parameters
changeIntelWiFi-RoamingAggressiveness.ps1
Within the script I have the following line:
Set-NetAdapterAdvancedProperty -Name Wi-Fi -DisplayName "Roaming Aggressiveness" -DisplayValue "4. Medium-High"
Hope this helps anyone else out there looking to set this up on a large scale, you can likely target this script different as required...

How to disable external display (s-video adapter)

My problem is this:
I have the new iMac in my office and I have my widescreen TV (CRT non-HDTV) on the other side of the wall in the living room. I recently purchased the Apple video adapter so I could run a s-video cable through the wall to my TV. I got it to work fine but how do I disable it? If I have mirroring on (only way to use Front Row) my iMac screen resolution drops obviously but I can't turn native screen resolution back on without either a) turn off mirroring b) remove video adapter.
Surely there is a better way to do this?
Joshua.

I'm not a hundred percent sure this will work for you since I've never used svideo out on my mac before, but if it works similar to dvi out, then do the following:
1. Set you tv up as extended desktop rather than mirror. This will allow you to set different resolutions on the internal and external monitors.
2. When you want to use the TV for front row, drag the Menu bar from the internal monitor to the external monitor in the monitors system pref. This will make your tv the controlling monitor and front row will play on it.
3. When you finish with front row, drag the menu bar back to the internal monitor.
Again, this works when I have my dvi cable connected to my tv, I'm not sure if a svideo output is treated the same way, though I would think it should be.
Glor

How do I determine if my network adapter is in the kernel?

Hello everyone Great job on this distro. I am a newbie Anyway quick question on other platforms(Freebsd,etc) my nic card is listed as sis0. I can't seem to get the OS to recognize the nic card. Doing a dmesg shows that the board is a SIS 730 chipset. Any suggestions on how to get this to work? I have a W2k dhcp server and a router with IP address 192.168.x.x that Arch picks up no problem as the default gateway. Just a little confused...Mark

Hi Mark,
Here is some info I hope you find useful.
1. SIS5513:IDE Controller at...SIS5513:not 100% native mode:will probe irqs later.
This is not your ethernet card chipset. This refers to your northbridge/southbridge chipsets. These are simply two chips that the CPU talks through to perform many functions. The CPU uses IDE via the southbridge chip, in your case the SIS5513. You can safely ignore this message. I'm not familiar with the sis900 module, but is it for a PCI ethernet card? If so, you can confirm that this is the proper module by:
[root@limbo linux]# cat /proc/pci | grep -i eth
Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 67)
As you can see, in my case, I have a PCI ethernet card that uses the via-rhine module.
2. Have you properly edited the "eth0 = " section in /etc/rc.conf? You have to set it up properly. How to you connect to the internet? I can't really make suggestions about how to edit rc.conf unless you provide info on how you connect to the internet.
3. Assuming you have /etc/rc.conf properly configured, after you "modprobe sis900" you have only enabled the module for your card. You still have to start your network connection. What is the output of the following command?
[root@limbo linux]# /etc/rc.d/network start
4. If (3) starts the network fine, then add network to the list of services you want started at boot in /etc/rc.conf
I hope you find this info helpful. I know how frustrating it is when things aren't working (all too well ), but hang in there, you'll get it.

OSB - How to disable a JCA Pooling (DB Adapter) or AQ Listener

Hello!
I have created a JCA DB Adapter Pooling on OSB that calls a ProxyService everytime a record is changed on database.
My question is: is it possible to disable or pause it temporally?
Thanks

Yes you can temporary disable the OSB from osb console. click on the proxy service name then go to operational settings and unchek the box next to State.https://blogs.oracle.com/ateamsoab2b/entry/automatic_disabling_proxy_service_when

How to switch my Atheros AR8151 network adapter to 1G speed

Hi,
I have an Alienware 17x3 with an Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20). Since a reinstall of my laptop I can't get my network up to 1G anymore. The connection is always 100M.
I already tried several drivers but no luck.
Can someone help me pls?
Thanks in advance
Kind Regards
Filips Houbrechts

Hi IEEE488,
Thanks for the link. In the meantime My PC is re-installed about a month ago and all my software is in place already. All of the mentioned drivers are already installed but maybe not in the right order.
What do you suggest in this case?
Thanks in advance
Kind Regards

Windows 7 x64 Network Adapter Stops working on high load

My Network has been failing and it has been happening for about a month or so on Windows 7 x64. I dont think that the system configuration is the problem as it is happening on 2 seperate machines. One being a relatively beefed up "white" box, 4 gig OCZ ram, EVGA nForce 790I SLI Mobo, Q9600 Quad core processor, dual raid 1 - 150 Gig Raptors, 2 8800GTX SLI cards, Pure Power 800W PS. The second machine is an IBM Netbook S10. I use the Netbook as a media center connected to a Pioneer Elite 1050HD. One thing is I have a PS3 and have several 1TB Esata drives connected to an IOGear 3132 Esata 3.0Gb pciX card to my desktop.
My typical usages:
1. FTP from a private server
2. Streaming music via Winamp
3. Streaming video 720, 1080 from pc to PS3 via the PS3 Media Server
4. DLing demos or movies on the PS3
5. Network streaming a movie from the Esata drives to the bedroom or kids rooms
6. Streaming video from abc.com or southparkstudios.com from the Cox cable modem
7. RDC over VPN to work machines
Now I have noticed that when I am streaming HEAVILY, from any 2 of the above mentioned, my network connections will simply stop working with a yellow exclamation mark on the task bar network icon after a few moments, nothing in the event logs, no logs or ANYTHING at all. It will simply stop working no notifications or anything poof, gone. I have EVERY single patch, driver anything I can think of installed. Nothing works, the timing is completely random. FYI I have a NETGEAR ProSafe VPN Firewall FVX538 with a cable modem connection on WAN 1 and a cellular connection on WAN2, these have no impact I feel on the connections because the PC may go down or the Netbook will go down depending on which one has the most load. So this simply tells me that it it not a firewall router problem as I have tried using a cisco unmanaged 24 port 1GB switch and I get the same problems. From analyzing the systems and layout I am led to believe that it is either a network adapter driver OR a Windows 7 problem (collisions, unhandled exception?), this NEVER happened with XP or Vista. I have tried everything but a new network adapter, I have tried the secondary adapter card on the mobo, I have tried bridging the two, I have tried daisy chaining the switch and putting each machine on its own dedicated switch linked to each other with no change. When the network goes down it is only that box effected, all other machines still connect to each other fine, only the one with load shuts down and the only ones that shut down are Windows 7. These machines are all wired with commercial cat5e patch cables, they have all been swapped for new ones lately. All networking and PC equipment are on UPS so I doubt voltage variations. Windows Firewall is disabled I only use the hardware firewall, I do not use any antivirus.
I am completely out of options, can anyone recommend a new route?
In addition when I go to the command prompt and attempt to do an ipconfig /release. I get an error saying that the adapter is not in a usable state. Very irritating, this forces me to reboot, or right click disable/enable on the network adapter. The right click route takes almost a minute to complete.
Tried update driver in nvidia control panel, no luck. I have also turned off the networking power saver option in the adapter settings.

Hi,
Considering this issue occurs on 2 different machines, I also think this issue may be more hardware related. You may also try the following:
1.    If the computers are connecting to a router, please ensure the router’s firmware is up-to-date.
2.    Please run the following command in an elevated command prompt in Windows 7:
netsh interface tcp set global rss=disabled
netsh interface tcp set global autotuninglevel=disabled
netsh int ip set global taskoffload=disabled
3.    Disable SNP in Windows 7 by setting Registry as following:
Note: Please perform a full-system backup first.
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters]
EnableTCPChimney=dword:00000000
EnableTCPA=dword:00000000
EnableRSS=dword:00000000
If the keys do not exist, please create them and assign the value.
An update to turn off default SNP features is available for Windows Server 2003-based and Small Business Server 2003-based computers
4.    If the issue persists, please add another network adapter to this computer and see how it works.
Hope this helps. Thanks.
Nicholas Li - MSFT
Hi, I'm experiencing a simular problem here.
My PC was using Asus P5Q-E motherboard but exchanged it for Asus P5Q TURBO Pro because it loses 'connectivity ' after an interval between a few hrs to 26hrs. During this state, I can't browse or my Outlook to check emails. The only thing that can send/receive data is Vuze. Plus, the strange thing is that the network icon says there's nothing wrong at all (when it obviously there is). Even the currency desktop gadgets says the time elapsed since it 'lost connectivity '.
I initially thought P5Q-E was faulty so now I'm using the TURBO Pro. However, the problem still persisted.
I am using Win 7 Ultimate x64 with all the updates and drivers. Connected via LAN cable to the router and the firmware is the latest. My ISP sent me a replacement router to confirm that their equipment is not faulty, which is true.
I have tried the above methods 1-3.
Although I'm not sure if I implemented Method 3 correctly since I don't usually go to the registry but here's what it looks like after creating it:
EnableRSS   REG_DWORD   0x00000001 (1)
EnableTCPA REG_DWORD   0x00000001 (1)
EnableTCPChimey REG_DWORD   0x00000001 (1)
There are 3 more PC's and 1 laptop in the house. 2 PCs use Win XP, 1 uses Win 7 Ultimate x64 and laptop uses Linux Ubuntu.
My PC has a second OS, Linux Ubuntu, I used it to time trial both motherboards (before and after switching) and found no problems at all even after 48hrs, so it confirms it's not a hardware issue.
The other PC's apart from mine are connected wirelessly. As far as I've been told, they don't experience the same issue I have.
I've been trying to tackle this problem for months now and I'm frustrated to reboot my PC every time it 'loses connection '.
I chatted with Asus about the issue when I still had the P5Q-E mobo, they said that they built a simular system to mine with the same mobo and said they couldn't reproduce the problem I'm having. THey even tested on other mobos with the same LAN chip and found nothing wrong. That's why I got the TURBO Pro that has a different LAN chip.
Anyone got anymore suggestions???
Thanks in advance.

NVIDIA Network Adapter problem (MSI K8N Neo4-F)

We have an MSI K8N Neo4- F motherboard. We are running Windowx XP SP2 (just upgraded to Service Pack 2). The computer will only boot in Normal mode if we disable or remove the NVIDIA Network Adapter driver. If we attempt to boot in Normal mode, it always ends with a Bad Pool Header problem (Blue Screen of Death). If we boot in Safe Mode with Networking, we can access the Internet. If we disable or remove the driver, then boot in normal mode, we can run in Normal mode but we do not have internet connection.
Does anyone know how we can use the onboard Network Adapter, and still boot in normal mode?
We have been using the latest drivers from MSI for this motherboard. Is there a different version that can be used? Is it possible that we have to update our BIOS for it to work correctly with SP2?
Thanks!

I think I may have misunderstood what you meant by a clean install. I probably should have asked what you meant before I answered my last post.
If you mean "did we just build the system by wiping the hard drive, installing XP SP1, then apply SP2", the answer is no. The system has been running Windows XP SP1 for several years without any problems, and we just wanted to upgrade to SP2 because there is some software that we want to load that requires SP2 to run. We have lots of software loaded on this machine that we use every day that we really want to avoid (short of time right now to tackle that project) rebuilding the entire operating system/machine because of the work involved in reloading all the software, etc.
Am I correct in assuming that we would have to wipe out the hard drive and start over if we did a re-install from a slipstreamed SP2 cd? If so, then we will probably just stay with SP1 for the time being if there is no other option to fix this Nvidia driver problem until we have more time to do a complete re-install and reload of the computer.
What about just installing a NIC in one of the PCI slots and use that instead of the onboard NetWork Adapter?
Thanks for all your help.

Disable "Safe Mode with Networking in Windows 7"

Hello,
Does anyone know, how to disable "Safe Mode With Networking" option from Windows 7 boot menu?
Kind Regards
Kalle Reivilä

Hi,
Base on my research, there’s no official method to disable Safe Mode with networking in Windows 7.
Thank you for your understanding.
Regards,
Leo
Huang
Leo Huang
TechNet Community Support
Thank You .This is what I was afraid.
I work at school and We have one problematic classroom. It's http traffic is blocked by a FSecure's firewall, but students have figured out a way. They boot computers to safe mode with networking and after that
they have access to the Internet! Now We have to change Microsofts's own firewall.
Regards,
Kalle Reivilä

AGN Virtual Network Adapter

Why does AGN Network adapter install and what does it do?
I had two icons in network connections:
1. AGN Virtual Network Adapter
2. Local Area Connection
I am connected to an adsl router and am able to connect OK.
I disabled the AGN Virtual network adapter and am still able to connect ok.

Sorry, let me further add I get the following messages from Access connections after the wireless connection fails....
Error code: 011
Veyify that the encryption settings (WEP/TKIS/AES) specified in this profile match those expected by the wireless network
and
Verify that the wireless adapter in your computer has not been restricted from accessing the radio channels being used by the wireless newtork.
and
The wireless network name (SSID) specified in this profile shares the same radio channel as another wireless network that is in range. To attempt to resolve this conflict, click repair.
None of these messages are helpful or should be the problem. I had been using wireless access on this laptop with the same router for several years before 'uprading' the dirver...that's when my problems started.

How to disable IPv6 for loopback adapter (lo0)

I was wondering if anyone knows how to disable IPv6 for the loopback (lo0) adpater. I know how to do it for other adapters using the Network preferences pane, but lo0 doesn't appear there...
Thanks,
- alan

I need to temporary disable ipv6 address of lo0 (which by the way is not 127.0.0.1 but ::1) for testing development purpose..

How to disable/uncheck IPv6 in network adapter properties

Similar Messages

Maybe you are looking for