How to discard message in Queue Reciever?

          Hi there,
          I would like to discard a message in the Queue reciever when there is any exception
          occures in the OnMessage() method. Is setJMSExpiration() is the answer to it?
          Thanks in advance.
          Charan

          acknowledge() is on the message, commit() is on the session - but
          only applies to transacted sessions. There are also JTA
          transactions, which use neither. An MDB onMessage
          uses JTA transactions if it is configured to do so, and will
          commit the JTA tran for you. In addition
          there is AUTO-ACKNOWLEDGE ack-mode, where onMessage will
          do the ack for you (MDBs use AUTO-ACK or JTA transactions).
          I suggest you start with a JMS tutorial - the BEA JMS developer's
          guide starts with one, and javasoft has a more detailed one.
          Charan wrote:
          > Hi Tom,
          > Thanks for your responce.
          >
          > Can you pls let me method name to Commit the message? I couldn't find it on
          > the Java API.
          > I could find the method for acknowledging but not for commiting.
          >
          > Charan
          >
          >
          >
          >
          >
          > Tom Barnes <[email protected]> wrote:
          >
          >>Hi,
          >>
          >>I'm not sure what you are looking for, acknowledging or committing
          >>a receive deletes the message - so why can't the app acknowledge
          >>or commit?
          >>
          >>Tom
          >>
          >>
          >
          >

Similar Messages

How to receive message from queue based on JMSPriority

Hi all,
I want to receive message from Receive Message From Queue based on JMSPrirority.
I am able to send message to queue using Send Message To Queue component with specifying Priority value as Five(Liternal value).
Now, when I am trying to receive message from Queue by specifying JMSPriority='Five'; in Message selector, it is not working.
But, when I use JMSPriority is not null in Message selector, I am able to receive message.
How to receive message from queue by specifying exact value of JMSPriority.
Please suggest.

Hi WASIL,
I tried with captial FIVE and it is not working.
I tried also like operator and the standard example doesn't recieve messages based on priority.
I am experiecing below error:
Caused by: javax.jms.InvalidSelectorException: The selector is invalid: JMSPriority LIKE '%FIVE%';
    at com.adobe.livecycle.jms.QueueMessageReceiver.receiveMessageFromQueueWithPropertiesNoWait( QueueMessageReceiver.java:206)
    at com.adobe.livecycle.jms.JMSService.receiveMessageFromQueue(JMSService.java:413)
    at sun.reflect.GeneratedMethodAccessor1017.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:616)
    at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
    ... 135 more
Caused by: javax.jms.InvalidSelectorException: The selector is invalid: JMSPriority LIKE '%FIVE%';
    at org.jboss.jms.server.selector.Selector.<init>(Selector.java:107)
    at org.jboss.jms.server.endpoint.ServerSessionEndpoint.createConsumerDelegateInternal(Server SessionEndpoint.java:2103)
    at org.jboss.jms.server.endpoint.ServerSessionEndpoint.createConsumerDelegate(ServerSessionE ndpoint.java:277)
    at org.jboss.jms.server.endpoint.advised.SessionAdvised.org$jboss$jms$server$endpoint$advise d$SessionAdvised$createConsumerDelegate$aop(SessionAdvised.java:94)
    at org.jboss.jms.server.endpoint.advised.SessionAdvised$createConsumerDelegate_8721389917985 689973.invokeTarget(SessionAdvised$createConsumerDelegate_8721389917985689973.java)
    at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:111)
    at org.jboss.jms.server.container.SecurityAspect.handleCreateConsumerDelegate(SecurityAspect .java:124)
    at sun.reflect.GeneratedMethodAccessor389.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:616)
    at org.jboss.aop.advice.PerInstanceAdvice.invoke(PerInstanceAdvice.java:122)
    at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:102)
    at org.jboss.jms.server.container.ServerLogInterceptor.invoke(ServerLogInterceptor.java:105)
    at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:102)
    at org.jboss.jms.server.endpoint.advised.SessionAdvised.createConsumerDelegate(SessionAdvise d.java)
    at org.jboss.jms.wireformat.SessionCreateConsumerDelegateRequest.serverInvoke(SessionCreateC onsumerDelegateRequest.java:100)
    at org.jboss.jms.server.remoting.JMSServerInvocationHandler.invoke(JMSServerInvocationHandle r.java:165)
    at org.jboss.remoting.ServerInvoker.invoke(ServerInvoker.java:967)
    at org.jboss.remoting.transport.socket.ServerThread.completeInvocation(ServerThread.java:791 )
    at org.jboss.remoting.transport.socket.ServerThread.processInvocation(ServerThread.java:744)
    at org.jboss.remoting.transport.socket.ServerThread.dorun(ServerThread.java:586)
    at org.jboss.remoting.transport.socket.ServerThread.run(ServerThread.java:234)
    at org.jboss.remoting.MicroRemoteClientInvoker.invoke(MicroRemoteClientInvoker.java:216)
    at org.jboss.remoting.Client.invoke(Client.java:2034)
    at org.jboss.remoting.Client.invoke(Client.java:877)
    at org.jboss.remoting.Client.invoke(Client.java:865)
    at org.jboss.jms.client.delegate.DelegateSupport.doInvoke(DelegateSupport.java:189)
    at org.jboss.jms.client.delegate.DelegateSupport.doInvoke(DelegateSupport.java:160)
    at org.jboss.jms.client.delegate.ClientSessionDelegate.org$jboss$jms$client$delegate$ClientS essionDelegate$createConsumerDelegate$aop(ClientSessionDelegate.java:267)
    at org.jboss.jms.client.delegate.ClientSessionDelegate$createConsumerDelegate_87213899179856 89973.invokeTarget(ClientSessionDelegate$createConsumerDelegate_8721389917985689973.java)
    at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:111)
    at org.jboss.jms.client.container.StateCreationAspect.handleCreateConsumerDelegate(StateCrea tionAspect.java:136)
    at org.jboss.aop.advice.org.jboss.jms.client.container.StateCreationAspect_z_handleCreateCon sumerDelegate_930384804.invoke(StateCreationAspect_z_handleCreateConsumerDelegate_93038480 4.java)
    at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:102)
    at org.jboss.jms.client.container.ConsumerAspect.handleCreateConsumerDelegate(ConsumerAspect .java:76)
    at org.jboss.aop.advice.org.jboss.jms.client.container.ConsumerAspect_z_handleCreateConsumer Delegate_930384804.invoke(ConsumerAspect_z_handleCreateConsumerDelegate_930384804.java)
    at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:102)
    at org.jboss.jms.client.container.FailoverValveInterceptor.invoke(FailoverValveInterceptor.j ava:92)
    at org.jboss.aop.advice.PerInstanceInterceptor.invoke(PerInstanceInterceptor.java:86)
    at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:102)
    at org.jboss.jms.client.container.ClosedInterceptor.invoke(ClosedInterceptor.java:172)
    at org.jboss.aop.advice.PerInstanceInterceptor.invoke(PerInstanceInterceptor.java:86)
    at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:102)
    at org.jboss.jms.client.delegate.ClientSessionDelegate.createConsumerDelegate(ClientSessionD elegate.java)
    at org.jboss.jms.client.JBossSession.createConsumer(JBossSession.java:237)
    at org.jboss.jms.client.JBossSession.createConsumer(JBossSession.java:220)
    at org.jboss.jms.client.JBossSession.createReceiver(JBossSession.java:396)
    at com.adobe.livecycle.jms.QueueMessageReceiver.receiveMessageFromQueueWithPropertiesNoWait( QueueMessageReceiver.java:198)
    ... 140 more
Please suggest

How to send message to Queue using JMS

Hai Friends,
I have written one program, which sends one seriablizable object to the queue. At
queuesender.send(objectmessage) statement
i am getting the following exception, but message is going to queue. The next statement is not executing. Next statements is simple debug statement.
i.e.,System.out.println("Message has been send");
why this is not working let me know plzz
HERE is EXception
<May 15, 2006 11:02:46 AM IST> <Alert> <JMS> <BEA-040049> <JMSServer "cgJMSServer" store failure occurred while writing message for queue ACMQueue, java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-nonXA>, prefix = <weblogic>: flush failed
java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-nonXA>, prefix = <weblogic>: SQL exception
java.sql.SQLException: Connection failure. sendMethodRequest(...).

Hai Friends,
Previously i didn't give full stack trace. now i am sending the exact stack trace and little bit code. Plz help me
CaseQuerySearchResult cqsr = new CaseQuerySearchResult();
ObjectMessage obj = qsession.createObjectMessage();
while(rs.next())
// I am getting 10 fields from DB and setting those values like the following,
cqsr.children.setLoan(rs.getString(1));
obj.setObject(cqsr);
qconnection.start();
System.out.println("----B4 qsender----");
qsender.send(obj);
System.out.println("----After qsender----");
<May 15, 2006 12:05:47 PM IST> <Alert> <JMS> <BEA-040095> <JMSServer "cgJMSServer". Store I/O failure, java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-nonXA>, prefix = <weblogic>: ping failed, database not responding
java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-nonXA>, prefix = <weblogic>: SQL exception
java.sql.SQLException: Connection failure. sendMethodRequestNoFlush(...).
at com.pointbase.dbexcp.dbexcpException.getSQLException(Unknown Source)
at com.pointbase.net.netJDBCPrimitives.sendMethodRequestPrivate(Unknown Source)
at com.pointbase.net.netJDBCPrimitives.sendMethodRequestByID(Unknown Source)
at com.pointbase.net.netJDBCConnection.setAutoCommit(Unknown Source)
at weblogic.jdbc.wrapper.PoolConnection.setAutoCommit(PoolConnection.java:141)
at weblogic.jms.store.JDBCIOStream.opendb(JDBCIOStream.java:2205)
at weblogic.jms.store.JDBCIOStream.ping(JDBCIOStream.java:1286)
at weblogic.jms.store.StoreRequest.doTheIO(StoreRequest.java:355)
at weblogic.jms.store.JMSStore.execute(JMSStore.java:493)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
at weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:498)
at weblogic.jms.store.JDBCIOStream.opendb(JDBCIOStream.java:2287)
at weblogic.jms.store.JDBCIOStream.ping(JDBCIOStream.java:1286)
at weblogic.jms.store.StoreRequest.doTheIO(StoreRequest.java:355)
at weblogic.jms.store.JMSStore.execute(JMSStore.java:493)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-nonXA>, prefix = <weblogic>: ping failed, database not responding
java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-nonXA>, prefix = <weblogic>: SQL exception
java.sql.SQLException: Connection failure. sendMethodRequestNoFlush(...).
at com.pointbase.dbexcp.dbexcpException.getSQLException(Unknown Source)
at com.pointbase.net.netJDBCPrimitives.sendMethodRequestPrivate(Unknown Source)
at com.pointbase.net.netJDBCPrimitives.sendMethodRequestByID(Unknown Source)
at com.pointbase.net.netJDBCConnection.setAutoCommit(Unknown Source)
at weblogic.jdbc.wrapper.PoolConnection.setAutoCommit(PoolConnection.java:141)
at weblogic.jms.store.JDBCIOStream.opendb(JDBCIOStream.java:2205)
at weblogic.jms.store.JDBCIOStream.ping(JDBCIOStream.java:1286)
at weblogic.jms.store.StoreRequest.doTheIO(StoreRequest.java:355)
at weblogic.jms.store.JMSStore.execute(JMSStore.java:493)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
at weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:498)
at weblogic.jms.store.JDBCIOStream.opendb(JDBCIOStream.java:2287)
at weblogic.jms.store.JDBCIOStream.ping(JDBCIOStream.java:1286)
at weblogic.jms.store.StoreRequest.doTheIO(StoreRequest.java:355)
at weblogic.jms.store.JMSStore.execute(JMSStore.java:493)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
at weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:498)
at weblogic.jms.store.JDBCIOStream.ping(JDBCIOStream.java:1318)
at weblogic.jms.store.StoreRequest.doTheIO(StoreRequest.java:355)
at weblogic.jms.store.JMSStore.execute(JMSStore.java:493)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)

How to consume message with queue payload type 'SYS.AQ$_JMS' in BPEL

In oracle database
1. created a queue table with multi consumer, queue_payload_type => 'SYS.AQ$_JMS_OBJECT_MESSAGE' .
2. created a queue using this queue table.
3. started the queue.
4. From java class, published a message into this queue.
Now when I try to access this queue from bpel using AQ adapters, not able to see the queue name. But if I try to consume from java, it is working fine.
Please let me know how we need to access from bpel the messages that are not of xml type and are user defined objects.
Thanks

Hi
Thank You for your information,
I have seen that link which you have provided. Here they have given a example in which they are using Database messaging, i am working on memory/file based messaging.
I am using default JMS Queue (jms/demoQueue) and default Connection Factory (jms/QueueConnectionFactory) which is provided by default in the server. With these i am trying to push message from process to the Queue.
From other process i am trying to receive a message.
For default Queue and Connection factory, i think we dont need to configure any of the xml files.
Please try to use default Queue and Connection Factory to recevie a message from the Queue. Use two different process to develop this.
Thank You
Rgards
Reddy

How can I clean up queue one-time on Sun Java system messaging 6.3

Hi,
<address>Our Email server have a problem, When I run _./imsimta qm directory tcp_local_, There are about 5 Millions of messages in the queue.</address>
Now our Email server send messages very slowly, how can I clean up queue one-time?
the command _./imsimta qclean_ is very slowly.
What can I do to prevent this problem?
our Email server version is :
Sun Java(tm) System Messaging Server 6.3-6.03 (built Mar 14 2008; 32bit)
libimta.so 6.3-6.03 (built 17:12:37, Mar 14 2008; 32bit)
SunOS email-1 5.10 Generic_120011-14 sun4u sparc SUNW,Sun-Fire-V890
Thank you !

If you have more than 100,000 messages in the queue, then look at the MAX_MESSAGES parameter in [the job_controller.cnf file|http://wikis.sun.com/display/CommSuite/Job+Controller+Configuration+File]. If the parameter is not specified, it defaults to 100000. If you have more than that number of messages in the channel queues, it will take a long time for new/legitimate messages to be sent because job_controller is only considering the first 100,000 messages in the queue.
If you get into the "imsimta qm" command do do "sum -database", it will show a summary of what job_controller has in its internal cache and therefore what job_controller is working on. If you compare that to "sum -directory" you will probably see a difference.
If these are all legitimate messages, you need to increase MAX_MESSAGES, cnbuild, and restart job_controller.
If they are not, then preventing this in the future will require determining how they got into your queue and correcting that.
As for removing them, the "imsimta qm" commands allow you to select messages by various criteria and then you can "return" or "delete" them. But yes, that will take a long time if there are many messages because it is a single threaded process and it needs to open and examine each message. You may be able to accomplish the task more quickly with a shell script that works on individual channel queue subdirectories and then run multiple copies of that script in parallel. After you have cleaned out the queue, restart job_controller.
Also, you might want to consider [the subdirs channel keyword|http://msg.wikidoc.info/index.php/Subdirs_and_nosubdirs_Channel_Options].

How to Group messages in a same queue

Hi all,
if it's possible.... how can I group messages of a same interface in one only queue???
because today if SAP sends 100 iDocs, it generate 10 queues with 10 LUW each one... I want only one queue with 100 LUWs
I want it, even if the third message comes 10 minutes later and the queue is still being processed...
example....
my queue (Q1) has 2 luws being processed, and there's other queues with many other interfaces messages (Q2, Q3....Qn) and ten minutos later comes a third message wich should have to be on Q1... I don't want a new queue, I want the new message in queue(Q1) then i'll have sorted my three messages in only one queue
Any idea? thanks

because today if SAP sends 100 iDocs, it generate 10 queues with 10 LUW each one... I want only one queue with 100
LUWs
There is an option of Queue Priritization (document available for the same in SDN)....using this you can make sure that all the message related to an interface are processed in a pre-defined queue only.
Check if this is what you are looking for.
Regards,
Abhishek.

How to remove messages from JMS Queue?how to configure queue in spring?

Hi
I have Confiured a JMS configaration in spring applicationConfiguaration.xml file
<bean id="connectionFactory" class="org.apache.activemq.ActiveMQConnectionFactory">
<property name="brokerURL" value="tcp://localhost:61616"/>
<property name="useAsyncSend" value="true"/>
</bean>
<bean id="queue" class="org.apache.activemq.command.ActiveMQQueue">
<constructor-arg value="foo"/>
</bean>
<bean id="broker" class="org.apache.activemq.xbean.BrokerFactoryBean">
<property name="config" value="classpath:activemq.xml" />
<property name="start" value="true" />

</bean>
<bean id="auditInterface"
class="org.springframework.jms.remoting.JmsInvokerProxyFactoryBean">
<property name="serviceInterface" value="com.infiniti.gpn.auditing.AuditInterface"/>
<property name="connectionFactory" ref="connectionFactory"/>
<property name="queue" ref="queue"/>
</bean>
<bean id="listenerContainer" class="org.springframework.jms.listener.SimpleMessageListenerContainer">
<property name="connectionFactory" ref="connectionFactory"/>
<property name="destination" ref="queue"/>
<property name="messageListener" ref="auditMessageListener"/>
</bean>
Sender is sedning messages continusly messages that messages r storing in queue , these r acupying more memory in RAM , due to that jboss is restarting for each request, is there any way to clean up messages in Queue ? if it is there then how will configure that queue in apllicationConfiguaration.xml file?
Thanks in advance
Nara

Hi,
Even i have a similar kind of requirement where in, i want to clear the JMS Queue Message programmatically, on certain condition.
i am using Spring JMS. The JMS Queue has a listener. In the listener we want to clear the Queue contents based upon the condition.
If anybody has any idea about this, please reply back.
Thanks in Advance.
Manjunath.

How to send message to a multi-consumer queue using pl/sql

How to send message to a multi-consumer queue using pl/sql ? Thanks.
I tried following, but got an message: no receipient specified.
DBMS_AQ.ENQUEUE(
queue_name => 'aqadm.multi_queue',
enqueue_options => queue_options,
message_properties => message_properties,
payload => my_message,
msgid => message_id);
COMMIT;
END;
/

Here's two way to enqueue/publish new message into multi-consumer queue.
(1) Use explicitly declared recipient list
- Specify "Recipients" by setting recipient_list to messge_properties, before ENQUEUE().
DECLARE
recipients DBMS_AQ.aq$_recipient_list_t;
BEGIN
recipients(1) := sys.aq$_agent('RECIPIENTNAME',NULL,NULL);
message_properties.recipient_list := recipients ;
(2)Or, declare subscriber list permanently. Then you need not to specify recipient list each time you call ENQUEUE().
begin
dbms_aqadm.add_subscriber(
queue_name=>'YOURQUEUE',
subscriber=> sys.aq$_agent('RECIPIENTNAME', null, null)
end;
You can add 1024 local subscriber include maximum 32 remote-queue-consumer to one queue.

How to delete messages in the queue?

The system log shows that it could not send message from queue , so I want to delete messages in the queue.
Please tell me how to deal with , thank you !

because the system log (/var/adm/messages) shows that it could not upload bulk message and not send message from queue. I am afraid of system down , I always uses
imsimta qclean -from=sendmailuser -delete
the result is Deleted N message files
but I found that message files was exist at the same
could you tell me the reasons!!

How should I find out the number of messages on queue?

I am using iMQ 3.0. Point-to-point messaging.
I have sent some messages to the queue. How should I
find out the number of messages on queue ?

You can use MQ's admin tools (imqcmd or imqadmin)
to find that out.
'imqcmd query dst -n queuename -t q' will print out what
you want.
Check the administration guide for more info.

How the message appear to reciever only not the sender.

Hi Everyone,
I want to know in p2p or client server architucture ,how to view a Instant Message without adding the sender ip or Machine name , such in all IM software the sender see it's message what i need is how the message appear to reciever only not the sender.
How can i exctract the Machine name on a Lan.

OCKBA wrote:
I want to know in p2p or client server architucture ,how to view a Instant Message without adding the sender ip or Machine name ,For the server to receive a message, it has to read it from a socket. To prevent the sender seeing its own message, remember which Socket it came from and make sure it doesn't go back to that Socket.
How can i exctract the Machine name on a Lan.socket.getRemoteAddress()

How to delete the delta queue in the ECC

Hi everyone!
After I tryed to save a new Infopackage and I have the error :
(Deltas already loaded for request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG init. selection; no 2. init
Message no. RSM1071
Diagnosis
Deltas have already been loaded for the init. selection of request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG. A second initialization is therefore not possible with these selection conditions.
Procedure
If you want to carry out a new initialization, you have to choose selections that do not overlap.
If you want to repeat the init. for the same selection, you have to delete the delta queue in the source system, and restart the delta process.
As the error says - Deltas have already been loaded for the init. selection.
Can you please give me some links/guids which describes how to delete the delta queue in the source system, and restart the delta process.
thank you, Ron

Hi,
Assuming as you need to the reinit for same selections.
in such case you need to delete old init.
how to delete init:
Go to your info pack screen, menu Scheduler--> initialization options for source system--> here you can see the existing init, select init(green) and delete it.
Later you can trigger your init info pack with selections.
Thanks

Issue while posting message to queue

Hi ,
I am getting following exception while posting message into queue.For every new build I am getting this exception and after 2 or 3 times of restart of corresponding OBPM related weblogic server,Issue is getting resolved
A component failed while executing activity '/COM/OU/UserlProcess#Default-3.0/ComponentExecution[PreProcessor]' (BP-method preProcessor) over instance '/COM/OU/UserlProcess#Default-3.0/15141/0'.
Details:
The task could not be successfully executed.
Reason: 'fuego.connector.ConnectorException: Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
Detail:Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
Caused by: Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
Detail:Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
Caused by: Connector [MAIN_Q:null:JMS] returned the wrong class [com.tibco.tibjms.naming.TibjmsConnectionFactoryAttributes] for a resource of type [2].
Detail:Connector [MAIN_Q:null:JMS] returned the wrong class [com.tibco.tibjms.naming.TibjmsConnectionFactoryAttributes] for a resource of type [2].
fuego.lang.ComponentExecutionException: The task could not be successfully executed.
Reason: 'fuego.connector.ConnectorException: Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
Detail:Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
     at fuego.server.execution.EngineExecutionContext.invokeMethodAsCil(EngineExecutionContext.java:1091)
     at fuego.server.execution.EngineExecutionContext.runCil(EngineExecutionContext.java:1277)
     at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.runCil(ComponentExecutionMicroActivity.java:126)
     at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.execute(ComponentExecutionMicroActivity.java:84)
     at fuego.server.execution.microactivity.MicroActivityEngineExecutionHandler.executeActivity(MicroActivityEngineExecutionHandler.java:57)
     at fuego.server.execution.ImmediateActivity.execute(ImmediateActivity.java:42)
     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
     at fuego.transaction.TransactionAction.startNestedTransaction(TransactionAction.java:527)
     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:548)
at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
     at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:62)
     at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42)
     at fuego.server.execution.ToDoItem.executeAutomaticWork(ToDoItem.java:251)
     at fuego.ejbengine.ItemExecutionBean$1.execute(ItemExecutionBean.java:217)
     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
     at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
     at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
     at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
     at fuego.ejbengine.ItemExecutionBean.processMessage(ItemExecutionBean.java:203)
     at fuego.ejbengine.ItemExecutionBean.onMessage(ItemExecutionBean.java:115)
     at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
     at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
     at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4123)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:4013)
     at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:4541)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:464)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
Caused by: fuego.connector.ConnectorException: Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
Detail:Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
at fuego.connector.ConnectorException.exceptionOnGetResource(ConnectorException.java:95)
     at fuego.connector.ConnectorTransaction.getResource(ConnectorTransaction.java:324)
     at fuego.connector.ConnectorTransaction.getResource(ConnectorTransaction.java:298)
     at fuego.connector.JMSHelper.getSession(JMSHelper.java:75)
     at fuegoblock.msg.DynamicJMS.sendMessage(DynamicJMS.java:145)
     at xobject.Utility.JMSService.writeToAppQueue(JMSService.xcdl:11)
     at xobject.Utility.Notification.sendAuditNotification(Notification.xcdl:19)
     at XXX.ManualProcess.Default_3_0.Instance.CIL_preProcessor(Instance.xcdl:20)
     at XXX.ManualProcess.Default_3_0.Instance.CIL_preProcessor(Instance.xcdl)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at fuego.server.execution.EngineExecutionContext.invokeMethodAsCil(EngineExecutionContext.java:1082)
     ... 31 more
Please help how can I resolve this issue
Thanks
Sailendra

I am also getting the same issue. Sailendra, did you resolve the issue?
If not could anyone help us to resolve this issue.
I am using Tibco JMS for queue and I have set 'ConnectionFactory' as Connection Factory Lookup Name value in the external resourse.
Thanks in advance.
Regards,
Ramanan

Net.Msmq Binding Not Picking Up Messages in Queue as soon as the application pool gets recycled

Hi,
We are trying to implement a wcf service that exposes a net.msmq endpoint. We are running windows server 2008 R2/IIS 7.5 running on a DOMAIN mode.
1. Our service is called service.svc and it is deployed under an application called Test in the default website (application pool running under network service)
2. The url to reach the service webpage is http://machinename/Test/service.svc.
3. We created a private queue called Test/service.svc and we configured permissions for network service to full control.
Now, when the application pool is "alive" the service picks up the messages correctly, but as soon as the application pool gets recycled (because of timeout or any other reason), the service stops picking up the messages, that just sit in the queue until the service starts again by browsing to the service webpage (http://machinename/Test/service.svc)
I know this is a popular question, but I already tried several solutions with no luck (for example, we triedhttp://keithelder.net/blog/archive/2009/06/03/fix-for-wcf-netmsmqbinding-not-picking-up-messages-in-queue.aspx,http://www.codewrecks.com/blog/index.php/2009/03/17/hosting-a-wcf-service-based-on-msmq-in-iis7/,http://social.msdn.microsoft.com/Forums/en-US/wcf/thread/a1df55c4-e642-442a-9057-f0aec278d10c/ and other ones)
Any Help?
If this post is helpful, please mark it as such
Alessandro Cardoso
MVP | Microsoft Heroes | MCT
blog: http://itaustralia.spaces.live.com
http://cardosoalessandro.spaces.live.com

Hi Steven,
I am Alessandro's colleague, I am working with him on these net.msmq issues.
Our configuration includes a transactional queue called Test/Service.svc (unauthenticated,
we shut down all security for the moment...does it matter?) and these attributes on the service:
[ServiceContract]
public interface IService
[OperationContract(IsOneWay=true)]
void ProcessMyMessage(MyClass parameter);
[ServiceBehavior(InstanceContextMode = InstanceContextMode.PerCall, TransactionIsolationLevel = IsolationLevel.Serializable, TransactionTimeout = "00:03:00")]
public class Service: IService
[OperationBehavior(TransactionScopeRequired = true, TransactionAutoComplete = true)]
public void ProcessMyMessage(MyClass parameter)
//Do some stuff here
The service is hosted on IIS 7.5 under an application called Test (so that the full http address of the service is http://machine/Test/Service.svc).
In the configuration (for both client and service) we specified None for the security mode, "true" value in durable and exactlyOnce
The Net.msmq Listener Adapter windows service is running fine under the Network Service account (the same as our application pool)
Is there something we are missing?
Also, can you explain how a transaction not configured properly can create this behaviour? In my understanding the process of delivering a message happens in 3 steps (I remember a nice picture of this the Juval Lowy book):
1) Transaction 1: client delivers message to local instance of msmq. The transaction rolls back if the message does not get delivered.
2) Transaction 2: the local instance of msmq delivers the message to the remote (service) instance of msmq. The transaction rolls back if the message does not get delivered.
3) Transaction 3: wcf activates my service which picks up the message and process it. The transaction rolls back if the service fails to pick up the message or does not complete the transaction (for example, because of an unhandled exception).
The message gets delivered to the service machine successfully, so I am assuming that steps 1 and 2 are executed correctly. If my service was not configured to handle transaction properly, wcf should still activate it and do something with it. Or at least,
if it doesn't get activated at all, this should be the case even when the application pool is well alive and awake, because it should be a configuration problem. Instead, the service works great if the appPool is alive and it never gets activated when the
appPool is sleeping (absolute nothing in the .svclog trace file generated by the service). Am I saying something wrong?

Drop messages in queue that have a blank sender

I'm getting hundreds of messages in the Queue where the From Address is < >.
Do I just let these build up or is there a setting somewhere that would just drop the message if it has a blank sender?
Here is an example of one that I've received;
Identity: Pebbles\512\21474838371
Subject: Undeliverable: MUST READ: Vehicle's Below Kelly-Blue-Book*
Internet Message ID: <[email protected]>
From Address: <>
Status: Ready
Size (KB): 10
Message Source Name: DSN
Source IP: 255.255.255.255
SCL: -1
Date Received: 5/27/2014 11:51:09 AM
Expiration Time: 5/29/2014 11:51:09 AM
Last Error: 400 4.4.7 Message delayed
Queue ID: Pebbles\512
Recipients: [email protected];2;2;[{LRT=};{LED=400 4.4.7 Message delayed};{FQDN=};{IP=}];0;CN=outbound,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT)....
1 email server in domain; Exchange 2013 sp1/Win2012 Standard
PennyM

On Exchange 2010 you have antispam agents that can help you discard such messages.
Sender filtering has a check box called drop messages with blank senders select that and restart the transport service on the servers to get that updated quickly.
In 2013 server, you have sender filtering as well.

How to discard message in Queue Reciever?

Similar Messages

Maybe you are looking for