How to display a select query record in a tool tip?

hi,
How to display a select query record in a tool tip?
for example i have a report employee. when i move the mouse pointer over a employee name, the tool tip should display the respective department id, department name...of that employee name.
select dep_id, dep_name ....from department where employee.....Is it possible?
thanks

Dear Skud,
Yes its possible..select ''||ename||'' from emp
other wise you can use jQuery tooptip or some other JScript bundles.
Thanks and Regards
Maheswara

Similar Messages

Displaying the selected multiple records from node using onleadselect event

Hi all,
How to display the selected multiple records from node to node using onleadselect event.
i came to know tht to fulfill this requirement i need to use the method get_selected_elements,
how to use this method in my event??
sree

Hi Sree,
Try below code..
DATA : lo_nd_it_lips TYPE REF TO if_wd_context_node,             // This is first node
             lo_el_it_lips TYPE REF TO if_wd_context_element,
             ls_it_lips TYPE wd_this->Element_it_lips,
             lt_it_lips TYPE wd_this->Elements_it_lips.
           DATA: wa_temp TYPE REF TO if_wd_context_element,
            lt_temp TYPE wdr_context_element_set.
* navigate from <CONTEXT> to <IT_LIPS> via lead selection
      lo_nd_it_lips = wd_context->path_get_node( path = `ZRETURN_DEL_CHANGE.CHANGING_3.IT_LIPS` ).
      CALL METHOD lo_nd_it_lips->get_selected_elements
        EXPORTING
            INCLUDING_LEAD_SELECTION = ABAP_true
        RECEIVING
          set = lt_temp.
      DATA lo_nd_pack_mat TYPE REF TO if_wd_context_node.          //Second Node
      DATA lo_el_pack_mat TYPE REF TO if_wd_context_element.
      DATA ls_pack_mat TYPE wd_this->Element_pack_mat.
      DATA lt_pack_mat TYPE wd_this->Elements_pack_mat.
* navigate from <CONTEXT> to <PACK_MAT> via lead selection
      lo_nd_pack_mat = wd_context->get_child_node( name = wd_this->wdctx_pack_mat ).
      lo_nd_pack_mat->get_static_attributes_table( importing table = lt_pack_mat ).
      LOOP AT lt_temp INTO wa_temp.
        CALL METHOD wa_temp->get_static_attributes
          IMPORTING
            static_attributes = ls_it_lips.
              ls_pack_mat-vbeln = ls_it_lips-vbeln.
              ls_pack_mat-material = ls_it_lips-matnr.
              ls_pack_mat-vgbel = ls_it_lips-vgbel.
                append ls_it_lips to lt_unpack.
              CLEAR ls_pack_mat.
       ENDLOOP.
Cheers,
Kris.

How to display the selection screen fields for selected checkboxes

Hi all,
         I have 7 checkboxes, for each check box we have some seletion screen fields.if i select first check box,i want to display first slection screen fields only.
and if we select more than one check box how to display the selection screen fields for selected check boxes,please help me this
Thanks
sriman.

hi,
Try this code
report z_13317_sdn2.
tables : mara, marc, dd03l.
parameters : p_chk1 as checkbox user-command ABC,
             p_chk2 as checkbox user-command PQR,
             p_chk3 as checkbox user-command XYZ.
select-options : s_matnr for mara-matnr modif id A,
                 s_ersda for mara-ersda modif id A,
                 s_werks for marc-werks modif id B,
                 s_lvorm for marc-lvorm modif id B,
                 s_tab for dd03l-tabname modif id C.
data: v_chk1,
      v_chk2,
      v_chk3.
at selection-screen output.
loop at screen.
    if screen-group1 = 'A' or
       screen-group1 = 'B' or
       screen-group1 = 'C'.
        screen-input = 0.
       modify screen.
    endif.
endloop.
loop at screen.
    if v_chk1 = 'X'.
      if screen-group1 = 'A'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk2 = 'X'.
      if screen-group1 = 'B'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk3 = 'X'.
      if screen-group1 = 'C'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
endloop.
at selection-screen.
if sy-ucomm = 'ABC'.
    if v_chk1 = ' '.
      v_chk1 = 'X'.
    else.
      v_chk1 = ' '.
    endif.
endif.
if sy-ucomm = 'PQR'.
    if v_chk2 = ' '.
      v_chk2 = 'X'.
    else.
      v_chk2 = ' '.
    endif.
endif.
if sy-ucomm = 'XYZ'.
    if v_chk3 = ' '.
      v_chk3 = 'X'.
    else.
      v_chk3 = ' '.
    endif.
endif.
Regards,
Sailaja.

How to display the selection screen with icons as well as with text element

How to display the selection screen with icons as well as with texts (written in text elements) for PlantDate, OrderType,WareHouse..

Report zex33.
type-pools: icon.
selection-screen begin of line.
selection-screen comment 1(20) text_001.
parameters: p_werks type marc-werks.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_002.
parameters: p_whouse(10).
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_003.
parameters: p_auart like vbak-auart.
selection-screen end of line.
initialization.
write ICON_PLANT as icon to text_001.
concatenate text_001 text-001 into text_001 separated by space.
write ICON_WAREHOUSE as icon to text_002.
concatenate text_002 text-002 into text_002 separated by space.
write ICON_ORDER as icon to text_003.
concatenate text_003 text-003 into text_003 separated by space.

How to insert the select query result into table?

How to insert the select query result into table?
SELECT top 20 creation_time
,last_execution_time
,total_physical_reads
,total_logical_reads
,total_logical_writes
, execution_count
, total_worker_time
, total_elapsed_time
, total_elapsed_time / execution_count avg_elapsed_time
,SUBSTRING(st.text, (qs.statement_start_offset/2) + 1,
((CASE statement_end_offset
WHEN -1 THEN DATALENGTH(st.text)
ELSE qs.statement_end_offset END
- qs.statement_start_offset)/2) + 1) AS statement_text
FROM sys.dm_exec_query_stats AS qs
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) st
ORDER BY total_elapsed_time / execution_count DESC;
Thanks,
Tirumala

1. SELECT INTO
Below method will create table when data is inserted from one table to another table. Its useful when you need exactly same datatype as source table.
Use AdventureWorks2008R2;
Go
---Insert data using SELECT INTO
SELECT AddressLine1, City
INTO BothellAddresses
FROM Person.Address
where City = 'Bothell';
GO
---VERIFY DATA
Select AddressLine1, City
FROM BothellAddresses
---DROP TABLE
DROP TABLE BothellAddresses
GO
2. INSERT INTO SELECT
Below method will need table to be created prior to inserting data. Its really useful when table is already created and you want insert data from
another table.
Use AdventureWorks2008R2;
Go
---Create Table
CREATE TABLE BothellAddresses (AddressLine1 NVARCHAR(60), City NVARCHAR(30))
---Insert into above table using SELECT
INSERT INTO BothellAddresses(AddressLine1, City)
SELECT AddressLine1, City
FROM Person.Address
where City = 'Bothell';
---VERIFY DATA
Select AddressLine1, City
FROM BothellAddresses
---DROP TABLE
DROP TABLE BothellAddresses
GO
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

How can I turn off the yellow pop-up tool tips?

Howdy,
I have searched high and low in the preferences and found nothing that does the trick. How can I turn off the yellow pop-up tool tips?
See attached screen shot. They are incredibly annoying. It's probably obvious, but I cannot find it anywhere on internets or this forum.
Thanks!

Thanks Nancy. Unfortunately that doesn't do it. I turned those off awhile back. Nor can I find anything under VIEW that seems to make a difference. Just FYI: I'm on a Mac OS w/Dreamweaver CS6 - but this has happened on previous versions of DW. Thanks again.

How to display lead selection ONLY in the ALV

HI All,
   User would like display the selected records in ALV .
   i suggested that add two button - "Display ALL" & "Display Selected" .
   How can i only display the lead selection only in the ALV? or Hide un-selected records.
   Please help.
Thank you so much
Gordon

Hi,
Pelase have a look.. same requirement.
get_selected_elements method for ALV
Re: select rows in alv and show them in another alv in another view
Web dynpro ALV table copy selected row
cheers,
Kris.

How to display multiple selected rows in a table inside a popup?

Hi,
I have a table on which multiple selection is enabled. I am able to get hold of multiple selected rows i.e. i am able to iterate over the selected row keys and print their values. Now, my problem is how to display the contents of all the selected rows in a popup? I get the details of only one row when I launch the popup.
Thanks
Karan

Hi,
Not confident if this works or not but just try it...
1. create a ViewLink between the same view Object.
The source and destination wil be the same Vo and the source and destination attribute will be the pk of both Vos.
2. Update the changes in Appln Module.
Open the AM and in DataModel tab .
select the Same VO from which you created table in the DataModel Listbox and select the VL in the "Avaible View Objects" List Box. Add under it(selected vo in datamodel listbox).
3. Refresh DataControl accordion.
4. in your jsff page drag and drop the child vo as a table..
See if it works
Regards,
Santosh.

How to write XSJS Select Query with input parameters

Hello Experts,
I am creating a xsjs file and in that file I am trying to write a Select Query based on a Calculation View
I have tried it the following way:
var query = 'SELECT TOP 100 \"Name\", \"Address\", \"City\", \"Country\" FROM \"_SYS_BIC\".\"Test.HL/AddressView\"'
+ 'WITH PARAMETERS(\'PLACEHOLDER\' = (\'$$P_Name$$\', \' Akhil \'),'
+ '\'PLACEHOLDER\' = (\'$$P_City$$\', \' Lucknow \'))';
But it gives me the "Mixed spaces and tabs error".
How should I write XSJS Select Query with input parameters?
Regards,
Rohit

>But it gives me the "Mixed spaces and tabs error".
Mixed spaces and tabs has nothing to do with the syntax of the statement. You used both spaces and the tab in the content - which JSLint doesn't like. Remove the beginning spaces of each line and use only one or the other.
The actual syntax of your statement doesn't look right. The problem is that you are escaping the \ when you don't need to if you are using ' instead of " for your string. You escape with \" in the first line but then escape with \' in the 2nd and 3rd line. That is going to cause serious parsing problems with the command.

How to display only selected columns in the table on the tableview

Hi All,
I am displaying in the below tableview the data from the SFLIGHTS tables in the tableview using flow logic. It displays all the columns in the database table. How can I set in the code to display only selected columns and not all columns.
Also, in these columns displayed I want to make the key columns of SFLIGHT as non editable and the rest of the columns in SFLIGHT editiable. Can you please kindly share the code to implement this.
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design="design2003" >
<htmlb:page>
    <htmlb:form>
      <htmlb:tableView id              = "tv1"
                       visibleRowCount = "10"
                       selectionMode   = "lineEdit"
                       table           = "<%= flights %>"
                       filter = "SERVER"
                       sort = "server"
                       iterator        = "<%= iterator %>" />
    </htmlb:form>
</htmlb:page>
</htmlb:content>
Thanks
Karen

Hi,
   Please try this code.
<!-- To display Table control on BSP page with table internal table it_hist --!>
          <htmlb:tableView id              = "TV_HIST"
                           headerText      = "Previous History"
                           headerVisible   = "TRUE"
                           footerVisible   = "TRUE"
                           design          = "ALTERNATING"
                           selectionMode   = "LINEEDIT"
                           visibleRowCount = "5"
                           fillUpEmptyRows = "TRUE"
                           table           = "<%= it_hist %>"
                           width           = "500" >
<!-- to show selected columns give required field name --!>
<htmlb:tableViewColumns>
<htmlb:tableViewColumn columnName          = "FIELD1"
                                     title               = "COLUMN1"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
<htmlb:tableViewColumn columnName          = "FIELD2"
                                     title               = "COLUMN2"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
<htmlb:tableViewColumn columnName          = "FIELD3"
                                     title               = "COLUMN3"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
<htmlb:tableViewColumn columnName          = "FIELD4"
                                     title               = "COLUMN4"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
<!-- to make column editable set edit property to TRUE --!>
<htmlb:tableViewColumn columnName          = "FIELD4"
                                     title               = "COLUMN4"
                                     edit = "TRUE"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
            </htmlb:tableViewColumns>
          </htmlb:tableView>

How to execute a select query stored in variable

Hello helpers ,
I have some "select queries" stored in the database . Now I can derive this query in some variable . How do I execute this query from the variable .
example :
Data Query type char50 .
QueryVar = 'Select MATNR from MBEW where BWKEY = '0001' . '
How do I execute this Query stoored in variable QueryVar in ABAP program ?
Thanks a lot for helping .
Regards
Shashank

Shashank,
It is also possible to use (column_syntax) and (dbtab_syntax) together with (cond_syntax) when using SELECT statements in ABAP. For more info on (column_syntax) and (dbtab_syntax) just have a quick look at ABAP Keyword documention on SELECT statement (hit F1 on SELECT then scroll down to Select->Select result->Select Columns....)
So in your case, you need to separate out (split) the value in 'wa_itab-query' into other variables or append into separate internal tables using common keys etc. - then looping at those tables with the common key (READ TABLE WITH KEY....) use the following syntax at the time of triggering the SELECT query:
SELECT (column_syntax)
       FROM (dbtab_syntax)
       WHERE (cond_syntax).
Also worth a look at this example below:
PARAMETERS: p_cityfr TYPE spfli-cityfrom,
            p_cityto TYPE spfli-cityto.
DATA: BEGIN OF wa,
         fldate TYPE sflight-fldate,
         carrname TYPE scarr-carrname,
         connid   TYPE spfli-connid,
       END OF wa.
DATA itab LIKE SORTED TABLE OF wa
               WITH UNIQUE KEY fldate carrname connid.
DATA: column_syntax TYPE string,
      dbtab_syntax TYPE string.
column_syntax = `c~carrname p~connid f~fldate`.
dbtab_syntax = `( ( scarr AS c `
& ` INNER JOIN spfli AS p ON p~carrid = c~carrid`
& ` AND p~cityfrom = p_cityfr`
& ` AND p~cityto   = p_cityto )`
& ` INNER JOIN sflight AS f ON f~carrid = p~carrid `
& ` AND f~connid = p~connid )`.
SELECT (column_syntax)
       FROM (dbtab_syntax)
       INTO CORRESPONDING FIELDS OF TABLE itab.
LOOP AT itab INTO wa.
WRITE: / wa-fldate, wa-carrname, wa-connid.
ENDLOOP.
Hope this helps.
Cheers,
Sougata.

How to Run a Select Query stored in a Variable

Hello,
I have a following requirement:
Result of one select query on Var1 , result of other select query in Var2 ,
if Va2 = 'value11' OR Var2 = 'Value2' then Var1 = 'select query'. Now how can I run this SQL query at the end of the Pl/SQL?
so I'm writing following query for the same:
DECLARE
qry nvarchar2(500);
result nvarchar2(500);
BEGIN
select 'select TEXTVAL as "CHARG" FROM TABLE1 WHERE LOC =''[ParameterValue]'' and KEYNAME =''<<REPLACE>>''' INTO qry from dual;
SELECT CASE WHEN count(RW."CountofBATCH") > 1 then 'Mixing'
WHEN count(RW."CountofMAT") = 0 then 'None'
ELSE 'Other'
END
INTO result
FROM TABLENAME2 TT, XMLTable('/Rowsets/Rowset/Row' PASSING TT.XMLCOL
COLUMNS
"CountofBATCH" PATH '/Row[CLABS > 0]/CHARG',
"CountofMAT" PATH '/Row[MATNR = "[Parameter Value]"]/MAT'
) AS RW
where
TT.PL = '[Parameter Value]' and
TT.TANK = '[Parametr Value]' ;
IF result = 'Mixing' OR result = 'None' THEN
qry := replace( qry , '<<REPLACE>> ' , result);
else
qry := 'Nothing';
END IF;
This way the variable qry will have select statement. Now How can I run this qry variable to get the output of that select statement in the same query?

you can use execute immediate if the output of the query is in the single query.
that is very simple.
have the query in the signle string and then pass like this
declare
qry varchar2(255);
result varcharf2(2500);
vempid number :=1;
begin
qry:='select empname from emp where empid=:empid';
execute immediate qry into result using vempid;
-----now the data result is in result
end;

How to create a select query to compare a collection via jpa?

I'm new to jpa (java persistence) and its query language.
If I've an entity named "Person" with a collection of Addresses (a one-to-manay relationahip), how do I create a Select query to get a person by using a collection of Addresses as its input parameter?
Would "SELECT p FROM Person p JOIN p.addresses = :addresses" work?

Hi,
You can try the below logic:
STATISTICS.date_reg} >= '27-may-2011' and { STATISTICS.date_reg} < ' 27-June-2011'
I guess you are trying to apply this condition.
Here in selection formula you need not to give select and from.
Cheers,
Kiran

How to month in select query.....for vbap

Hi Experts,
I am using selection option Listbox ( January, February, March, etc...).
How to use it in select query for table vbap (Shown below),
I want to retrieve data of january from vbap and matches erdat in pa_mnr.
    parameters: pa_mnr type ztemp-zlist as listbox visible
                length 13 default 'January'.
    select * from vbap into corresponding fields of table it_vbap
             where matnr in matnr1 and
                   gsber = 'HIP'   and
                   vstel = 'BSP'   and
                   erdat in pa_mnr.

hi,
take the date from the select option.
let say you have date, month and year seperate select option..
then look at some FM whcih gives month number for your month name..
concatenate all the three separated by dot and put it in a variable of type datum..
now your variable contains the user selected date.
you can write your select query.
rewards if useful
regards,
nazeer

How to display a selection option for service selection

Dear All,
I want to display the selection option ("Other sources") which I find
in the /nse80 screen painter but cannot be display in the ME22N.
/nME22N
-> select one Purchase Order for Services
-> select one Item Line
-> at "Services" tab on Item Details Level
-> Add new ICON behind "Serv. selection"
Any ideas?
Thanks,
Neil

Hi Sharmila,
Thanks for your reply!
Actually, I find a User Exit program ("EXIT_SAPLMLSP_011") in selection screen program ("SAPLMLSP" ). This User Exit is for the radio button ("Other sources").
However, I don't know how to activate that button at ME22N.
By the way, can you go more details on how screen exits work?
Really thank for your support!
Neil
Message was edited by:
Neil Lam

How to display a select query record in a tool tip?

Similar Messages

Maybe you are looking for