How to display a text in smartform without compression

Hi,
My requirement is to print a text in a smartform with out compression of the line text.
ex. In my internal table having a line text as
'spoolno 25200 | pageno 500--> while printing in smartform, it was displayed as
''spoolno 25200 | pageno 500'.
but i want to print the line as it is in Internal table. please send me the solutions..
Thanks in advance.

If you want your text to be read-only, you can use the RichText component instead of TextArea. Search for Text Layout Framework for more info on how to mark up your text.

Similar Messages

How to display long text in smartforms

Hi experts,
Iam trying to display long text into smartforms.I got the long text into ITAB frm database
in the abap program.In the form interface how to define the variable?In the long text i have 6 lines.
points guaranteed
cheers
kaki

Kaki,
Delcare a table and getting the LONG TEXT is not the right way of doing this.
You create a TEXT object and change the TYPE to INCLUDE TEXT. Once that is done all you have to do specify the parameters of your long text - TEXT ID, TEXT OBJECT and TEXT NAME. These are the same parameters that you use for READ_TEXT funciton. You don't have to fetch the text manually, it happens automatically.
Make sure this is a part of the main window as this might run into multiple pages.
Regards,
Ravi
Note : Please reward the posts that help you.

How to use standard texts in smartforms

Hi Friends,
How to use standard texts in smartforms, ie in scripts we are using standard texts using tr so10.
thanks in advance,
regards,
sharma.

For long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above
btw SO10 is just for Scriptform, in smartforms we use text module to replace SO10

HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS

HI,
   HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS?

in ur script main window
/: IF &TTXSY-PAGE& = 15.
ur text or standard text
/: ENDIF.
use this.
hope it helps if any issues revert back

How to add standard text in smartforms?

Hi friends,
How to add standard text in smartforms ?
points rewarded soon
Regards
RH

Creating the Standard Text:
Go to SO10
1. Enter Text Name. For example, ZABC
2. Text ID ST
3. Language EN
Click on Create.
And enter the Required Information and save.
To include a Standard text in SmartForm.
Follow the steps below:
1. Create a text node in the window.
2. Under general attributes select "Include text" as Type.
3. Specify the fields under Text.
Text Name ZABC
Text Object TEXT
Text ID ST
Language EN.
Hope it helps.
Regards.

Hi..how we enter standard text for smartform using include text

hi
guru
..how we enter standard text for smartform using include text..
i know only using so10 we write text..
in smartform it asking text-object
text-id,
so what values we should give to get text

Hi,
Do u want to print Standard Text or the Texts that are maintained at the Transaction level.
If it is standard text , then u use text id as ST or if it is Texts that are maintained at the Transaction level then u have to go to that specific transaction and check for that text , then go to text editor ,in the goto menu u have header data where u get the Text id , text name.... , use them in ur smartform in the INCLUDE text.
Further u have the option of text modules in smartforms which act as standard texts, so if u r going for creation of standard texts then its better to use text modules.
Regards,
Shafivullah Mohammad

How to display dynamic signature in Smartforms?

Hi,
Someone could help me in displaying dynamic signatures in SmartForms?. The signature is an attached file to the document. I already have the binary file but I don't know how to display this as an image in the Smartforms.
Thanks in advance,
Oliver
Message was edited by: Oliver Vera
Message was edited by: Oliver Vera

Please give me the reply.
I have an image content in one internal table.I want to display that image in the smartforms.
plaese please.

How to display Long text in a JLabel with multiline??

Hi,
Suppose I have a label that displays a long text....
""This is an example label that displays long text, how to break the line????.........""
how to display it like below with one label?
""This is an example label
that displays long text, how
to break the line????.........""
Thanks

so basically do this
JLabel myLabel = new JLabel();
String theText = "<html>This is an example label<br>
that displays long text, how<br>
to break the line????.........</html>";
myLabel.setText(theText);Obivously, u dont have to use a separate string, u could just call setText or pass it into the JLabel constructor, i just separated it to make it easier to see what your supposed to do.
GOod Luck

How to display Long text in alv output

Hi,
I have developed an ALV report.It is displaying the output.
There is another requirment for alv output text field as below
From the long text fields show only the first 20 characters and afterwards the long text icon. If the icon is clicked open the long text display screen.
Please give your suggestion how to work on this requirement.
Thanks in advance

Hi,
Create a hotspot for the long text column of ALV.
When user clicks on the hotspot, handle the event to display long text screen.
You may refer sample program of hotspot ALV :
Goto SE38
Type BCALV*
Click F4
search for HOTSPOT or EVENTS & you will get a sample program.
Best regards,
Prashant

How to display Formatted text in adobe form

In adobe form, I want to display the text which is inputed by formatted text edit in WD ABAP application.
It is always displayed as plain text like '<p>this is test text.</p>'. I have set the attribute Data Format to XHTML, Field Format to Rich Text for the Text Field in adobe form. But it doesn't work.
How to display these formatted text?
Thanks and Best Regards,
Jun

Hi Juergen,
I found Your blog and found it really interesting... though I was not able to use it: I (like Jun Li is asking, I guess) need to use a dynamic text, containing formatting informations (according the xhtml syntax).
I tried to pass it to the form by an ABAP-dictionary based interface and by means of the context (in a webdynpro page), but both tries failed.
Some suggestion will be greatly appreciated.
Thankyou
Simone

How to display the text as a Bold in the Text Element of a Smart Form

Hi,
I created one Smart Form.
In that i created the Text element.
I provide some data also in that.
It is coming as a MS WORD.
I executed my smart form.
Customer Number: &WA_KNA1-KUNNR&
it display the data of the particular customer.
But i need to display the Customer Number as BOLD or else Increase the Size.
For this also I created one SMARTSTYLE.
In that I created the Paragraph and Character Formats also.
Now i assignee that SMARTSTYLE in the Output Option Tab of the Text Element also.
But i unable to get the CUSTOMER NUMBER in Bold.
In MS WORD we have BOLD button.
I selected the Text and Press the BOLD button. At that time it is Highlighted.
Whenever i press the SAVE Button.
Then it is not saved with BOLD.
It is coming in Normal Format.
In the ECC 6.0. I am unable to get the Text as a BOLD.
This text Element is like a MS WORD.
Can you please tell me how to display the Data with BOLD. please tell me. I am unable to get that one.
Thank You.
Regards,
B. Krishna.

Hi,
Check where u have given BOLD. In character Format or in Paragraph format.
In SMART FORM,
1. Change to OLD EDITOR if u are confused with the new one.
        (This can be done by clicking the button left to new editor ).
2. If it is PARAGRAPH FORMAT,
           Give the name of paragraph format in the editor.
            P1         &WA_KNA1-KUNNR&
    If it is CHARACTER FORMAT,
                         <C1> &WA_KNA1-KUNNR&
Thanks,
Nithya.

How to display total in a block without total showing up in relevant detail block

Hi there,
          I create a worksheet, including two block, one of which have detail information with multiple characts and one key figure, another block only have sumerization information takes one cell, which is summarized key figure for that detail information block.
         I implement this summary cell with formula 'GETDATA', but it is only effective after I show total for detail block.
        such as for detail block:
                     employee_no, wage type, earning_amount.
                     overall result                        total for earning_amount
        for summary block:
                     summary of earning_amount for all employees in the detail block.
please tell me how to display summary block without pulling in overall result for detail block.
Many Thanks,

Hi bo zhang,
This can be a work around
As Michael Tocik suggested
goto components tab, right click on data source and select copy
do not insert cross tab
then use the formula for DS_2 like
=SAPGetData("DS_2","earning_amount","employee_no=TOTAL")
this should work.
and if you do any drill down for DS_1, the above total will not chnage because that is dependent on DS_2
Hope it helps
Best Regards,
Subhash

How to eliminate "Company" text in smartform "address" node

Hi all,
I got a problem.
I want to display company address using "Organization Address" in address node.
However, the address node displayed "Company" text automatically when company address contains incomplete info. Eg, the company address only contains city='new city' info.
Then the address node will displayed as below:
Company
city
Anyone know how to remove "Company" text if no incomplete company address data?
Any suggestion/comment will be greatly appreciated!
Thanks.
best regards,
Xiang Li Heah

read addres using internal tables. dont use address node..
refer this code.
SELECT SINGLE ADRNR FROM KNA1
INTO ADDRNUM
WHERE KUNNR EQ WA_VBPA1-KUNNR.
SELECT * FROM ADRC INTO TABLE IT_ADRC
WHERE ADDRNUMBER = ADDRNUM.
READ TABLE IT_ADRC INTO WA_ADRC INDEX 1.
then print wa_adrc-city.
wa_adrc-street like this.
if u want to remove company andall dat is already therein fields then please contact urfunctional consultant. they will give u the tcode to remove that.
some usefulinformation. hopeu will get tcode from here also. to remove company from address.
Client
SCC4
Tools > Administration > Administration > Client Admin > Client Maintenance
Change the name of the client you are using (updates T000) Client Independent
Company Code
OX02
IMG > Enterprise Structure > Maintain Structure > Definition > Financial Accounting > Define, copy, delete, check Company Code > Define Company Code
Change the name, city and country to your company details (updates T001)
Company Code Address
OBY6
IMG > Financial Accounting > Financial Accounting Global Settings > Company Code > Enter Global Parameters > Click on address button
Maintain the complete address details here (updates SADR)
Credit Control Area
OB45
IMG > Enterprise Structure > Maintain Structure > Definition > Financial Accounting > Maintain Credit Control Area
Change the description (updates T014)
Controlling Area
OX06
IMG > Enterprise Structure > Maintain Structure > Definition > Controlling > Maintain Controlling Area
Change the name (updates TKA01)
Plant
OX10
IMG > Enterprise Structure > Maintain Structure > Definition > Logistics u2013 General > Define, copy, delete, check plant > Define Plant. Select the plant of choice and go into the detail screen.
Change Name 1 and Name 2 and detailed information (updates T001W)
Plant address
OX10
IMG > Enterprise Structure > Maintain Structure > Definition > Logistics u2013 General > Define, copy, delete, check plant > Define Plant. Select the plant of choice and go into the detail screen. Click the address button.
Maintain the complete address details here (updates SADR)
Division
OVXB
IMG > Enterprise Structure > Maintain Structure > Definition > Logistics u2013 General > Define, copy, delete, check division > Define Division
Change the name (update TSPA)
Storage Location
OX09
IMG > Enterprise Structure > Maintain Structure > Definition > Materials Management > Maintain Storage Location
Change the description (updates T001L)
Purchasing Organization
OX08
IMG > Enterprise Structure > Maintain Structure > Definition > Materials Management > Maintain Purchasing Organization
Change the description (updates T024E)
Sales Organization
OVX5
IMG > Enterprise Structure > Maintain Structure > Definition > Sales and Distribution > Define, copy, delete, check Sales Organization > Define Sales Organization
Change the name and replace the standard texts ADRS_* with ZXYZ_* (updates TVKO)
Sales Organization Address
OVX5
IMG > Enterprise Structure > Maintain Structure > Definition > Sales and Distribution > Define, copy, delete, check Sales Organization > Define Sales Organization > Click the address button
Maintain the complete address details here (updates SADR)
Distribution Channel
OVXI
IMG > Enterprise Structure > Maintain Structure > Definition > Sales and Distribution > Define, copy, delete, check Distribution Channel > Define Distribution Channel
Change the name (updates TVTW)
Sales Office
OVX1
IMG > Enterprise Structure > Maintain Structure > Definition > Sales and Distribution > Maintain Sales Office
Change the description (updates TVBUR)
Sales Office Address
OVX1
IMG > Enterprise Structure > Maintain Structure > Definition > Sales and Distribution > Maintain Sales Office > Click the address button
Maintain the complete address details here (updates SADR)
Sales group
OVX4
IMG > Enterprise Structure > Maintain Structure > Definition > Sales and Distribution > Maintain Sales Group
Change the description (updates TVKGR)
Shipping Point
OVXD
IMG > Enterprise Structure > Maintain Structure > Definition > Sales and Distribution > Define, copy, delete, check Shipping Point > Define Shipping Point
Change the description and replace the standard texts ADRS_* with ZXYZ_* (updates TVST)

How to add package text to smartform

Hi,
i'm new to SAP and I have a question. We have smartform with material number and material text output. We also have package number - in what this material gets packed (palette, case etc.) Now we want to add also package text to smartform.
How to include package text from table?
Thanks

Hi,
i'm new to SAP and I have a question. We have smartform with material number and material text output. We also have package number - in what this material gets packed (palette, case etc.) Now we want to add also package text to smartform.
How to include package text from table?
Thanks

How to add body text to smartform email?

Hi,
In release 620, how can you add text to the mail message that is generated from e-mailing a smartform. I need to add a small message to the body of the message in addition to the attachment.
i.e. Please find attached your invoice. [attachement.pdf]
Thanks,
Guy

I don't know SmartForm so there may be another way to do it but the following approach was fine for Sapscript.
Basically have a look at the SAP sample programs bcs_example_* where * = 1 thru 5. I think bcs_example_5 is the one to focus on. This creates a simple email and then adds an attachemnt to it. In your case you want the attachment to be your SmartForm's output.
For the SapScript I was able to call the form from abap, receive the output into a table whose contents I could then attach to the email.
The attachment code needs to be changed to set type to OTF:
i_attachment_type = 'OTF'
I'll speak in SAPscript and hope there are equivalent terms in SmartForm. I created the following abap form to run the SAPscript and get it's output into a table:
     Form GET_OTF_CODE
FORM get_otf_code
USING us_work       TYPE zsd_fet_signup_confirm
CHANGING ch_otf_out TYPE solix_tab.
DATA: BEGIN OF otf OCCURS 0.
          INCLUDE STRUCTURE itcoo .
DATA: END OF otf.
DATA: itcpo LIKE itcpo.
DATA: itcpp LIKE itcpp.
CLEAR itcpo.
itcpo-tdgetotf = 'X'.
Start writing OTF code
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      form     = 'ZSD_FET_COVERFAX'
      language = sy-langu
      OPTIONS = itcpo
      dialog   = ' '
    EXCEPTIONS
      OTHERS   = 1.
CALL FUNCTION 'START_FORM'
    EXCEPTIONS
      error_message = 01
      OTHERS        = 02.
CASE us_work-recipient_type.
    WHEN c_agent_recipient.
      w_recipient_name = us_work-agent.
    WHEN c_asm_recipient.
      w_recipient_name = us_work-asm.
    WHEN OTHERS.
      w_recipient_name = 'IPL Agent/ASM'.
ENDCASE.
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      window        = 'MAIN'
      element       = 'HEADER'
    EXCEPTIONS
      error_message = 01
      OTHERS        = 02.
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      window        = 'MAIN'
      element       = 'TEXT'
    EXCEPTIONS
      error_message = 01
      OTHERS        = 02.
Close up Form and get OTF code
CALL FUNCTION 'END_FORM'
    EXCEPTIONS
      error_message = 01
      OTHERS        = 02.
MOVE-CORRESPONDING itcpo TO itcpp.
CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
      RESULT = itcpp
    TABLES
      otfdata = otf
    EXCEPTIONS
      OTHERS = 1.
Move OTF code to output structure
REFRESH ch_otf_out.
LOOP AT otf.
    APPEND otf TO ch_otf_out.
ENDLOOP.
ENDFORM.                    "GET_OTF_CODE

How to display a text in smartform without compression

Similar Messages

Maybe you are looking for