How to display dynamic signature in Smartforms?

Hi,
Someone could help me in displaying dynamic signatures in SmartForms?. The signature is an attached file to the document. I already have the binary file but I don't know how to display this as an image in the Smartforms.
Thanks in advance,
Oliver
Message was edited by: Oliver Vera
Message was edited by: Oliver Vera

Please give me the reply.
I have an image content in one internal table.I want to display that image in the smartforms.
plaese please.

Similar Messages

How to create Dynamic Window in Smartforms

Hi all,
Could you please help me out on how to create Dynamic Window in smartforms excluding Main Window.
Thanks in Advance.
Vinay.

hi,
Hi,
1.If you are creating the Different windows for the Countries,then In conditions tab of window specify the Condition i.e.
company -code = '2201'.
2.Then that window can trigger ofr that condition.
3.Other wise, if you are using the different layouts ,then write the condition in Print program and call that form .
reward me if helpful.

How to display dynamic column added by vo.addDynamicAttribute in jspx?

Hi,
I met problem when programmatically add cloumn and display it on screen. Here are my steps:
0. define a ViewObject using xml. Define a transient column Addtion2. later will add a dynamic column Addtion3, but not defined here.
1. Implement Application Module, adding a method init() and expose it to client.
2. In init() method, get target VO and use vo.addDynamicAttribute("Addition3"). Then iterate it use row.setAttribute("Addition3", Math.random()). Add init() to page binding and invoke it.( it's invoked )
3. In jspx, use dynamic table. But Addition3 never shows up.
This is my last question: Re: How to display dynamic column added by vo.addDynamicAttribute in jspx? People say I should use dynamic table.
please have a look at my code:
Application Module: when it runs, it will print 6 coulmns. vo.getAttributeCount() is 6.
<pre>
public void init() {
ViewObject vo = this.getCountryView1();
if (vo.getAttributeIndexOf("Addition3") == -1) {
vo.addDynamicAttribute("Addition3");
vo.executeQuery();
for (AttributeDef deft : vo.getAttributeDefs()) {
System.out.println(deft.getColumnName() + ": " + deft.getName());
RowSetIterator it = vo.createRowSetIterator("i1");
while (it.hasNext()) {
Row r = it.next();
r.setAttribute("Addition2", Math.random());
r.setAttribute("Addition3", Math.random());
it.closeRowSetIterator();
for (AttributeDef deft : vo.getAttributeDefs()) {
System.out.println(deft.getColumnName() + ": " + deft.getName());
System.out.println(vo.getAttributeCount()); //vo.getAttributeCount() is 6
</pre>
jspx: when it runs, only 5 columns are shown. Column Addition2's values are set as expected. but Column Addition3 never shows up. And #{bindings.CountryView1.attributeCount} shows 5.
<pre>
<af:table rows="#{bindings.CountryView1.rangeSize}"
fetchSize="#{bindings.CountryView1.rangeSize}"
emptyText="#{bindings.CountryView1.viewable ? 'No data to display.' : 'Access Denied.'}"
var="row" rowBandingInterval="0"
value="#{bindings.CountryView1.collectionModel}"
selectedRowKeys="#{bindings.CountryView1.collectionModel.selectedRow}"
selectionListener="#{bindings.CountryView1.collectionModel.makeCurrent}"
rowSelection="single" id="t1">
<af:forEach items="#{bindings.CountryView1.attributeDefs}" var="def">
<af:column headerText="#{def.name}"
sortable="true" sortProperty="#{def.name}" id="c1">
<af:outputText value="#{row[def.name]}" id="ot1"/>
</af:column>
</af:forEach>
</af:table>
<af:forEach items="#{bindings.CountryView1.attributeDefs}" var="def">
<af:outputText value="#{def.name}" id="ot2"/>
</af:forEach>
<af:outputText value="#{bindings.CountryView1.attributeCount}" id="ot3"/>
</pre>
it's quite weird for me. The vo.getAttributeCount() is 6, but #{bindings.CountryView1.attributeCount} shows 5. And column Addtion3 never shows up.
what's the matter? How can I show the dynamic added column Addtion3?
Edited by: simon li on 2012-9-10 下午7:31
Edited by: simon li on 2012-9-10 下午8:00

Hi,
Can you check the tree binding (CountryView1 - in the pagedef) and see it has the 5 attributes hardcoded in it. If yes, try removing everything and then run the page to see if it works fine.
-Arun

How to display image in the smartforms

Hi All,
I have image conent in the Binary formate.I want to dispaly that image in the smartforms.
Please tell me how to display that image in the smartforms dynamically.
Normally wa uploaded in SE78.And that is used in smartforms.But this is static way.
I want to display tha images dynamically.
Please Please
Thanks,
Saritha

Hi,
The image is in the DB ,right..Its in Binary format..
See first we want the picture to be get uploaded inside the SAP.It is done by se78..
If possible we can retrieve the picture outside in a place means we can get tht into sap by using
Call Transaction 'SE78'.
Reward if useful ...........

How to display long text in smartforms

Hi experts,
Iam trying to display long text into smartforms.I got the long text into ITAB frm database
in the abap program.In the form interface how to define the variable?In the long text i have 6 lines.
points guaranteed
cheers
kaki

Kaki,
Delcare a table and getting the LONG TEXT is not the right way of doing this.
You create a TEXT object and change the TYPE to INCLUDE TEXT. Once that is done all you have to do specify the parameters of your long text - TEXT ID, TEXT OBJECT and TEXT NAME. These are the same parameters that you use for READ_TEXT funciton. You don't have to fetch the text manually, it happens automatically.
Make sure this is a part of the main window as this might run into multiple pages.
Regards,
Ravi
Note : Please reward the posts that help you.

How to print dynamic images in smartforms?

Hi Guys,
We are maintaining images in QM02 similar to the header or item texts. Those images has to be displayed in smartform.
Can anyone know how to read any image from transaction and display the same in smartform. Those images will be different for different notification numbers?
Please let me know if instead of SE78 we can read the image and display the same in smartform?
Or is there anyway we can achieve the same?
Thanks,
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Dec 28, 2009 2:30 PM

Hi Naidu,
I Have the same problem with you. I Did a program to put all imagens in SE78. After this, you can use a variable to fill out the name.
Example:
Name: &name&
Object:GRAPHICS
ID:BMAP
Regards,
Marcelo

How to display dynamic header title in the report?

I have a req to display dynamic header title in the report.
When a id is entered in the prompt text, it will display the user data based on that user_id.
so similarly....the header title should vary each time when you select different user_id.
How can we implement this?

>
Zack H wrote:
> Lazaro,
>
> It depends on what you want displayed in the heading for each id.
> Please elaborate.
>
> Thanks,
> Zack H.
Zack..I have several projects listed under several project id's...
so when a user selects project id 00164 then it should display something like "Project document for Jon Doe"
again when the user selects project id as 00192 then it should display something like "project document for Zimmerman"
Did you get it??

How to create dynamic window in smartform

HI Floks
my requirement is invoice smartform having few line items .i can print this line items with different categories with dynamically placed in smartfom. there how many items with in particular category print its self . how is it possible to printing .is it possible to print dynamic fields and window without changing driver program and structure .How to create dynamic window.
any body knows reply me fast
thanks in advance ,
suresh

Hi suresh,
You can create all the windows, but if you go to specific window you will see different tabs like general attributes, output options and conditions. In that conditions tab, you can give condition. so based on that condition, that window will be printed.
Dont forget to reward points if helpful.
regards,
Chandra.

How to display digital signature on PDF?

How to see digital signature on the pdf. Pdf signature section show "At least on signature has problems." Please let me know, How resolve this issue to see the digital signature on the PDF.
Thank you,
Neeraj

Configure TurnKey installation to install Digital Signature into PDF.
Regards,
Joan

How to display dynamic values in poplist at row level in advanced table

I want to display dynamic values in poplist at row level based on a row value in advanced table, with lov i can achieve it, is there any way to achieve this in poplist
Thanks
Bbau

Babu,
You have been long enough in forum and still come out with these one liners. Problem statement is not clear.
--Shiv

How to display dynamic datas and double datas (chart)

Hi all !
I would like to display dynamic datas and double datas by using charts.
However, it doesn't work and I don't understand why.
Can you help me to fix that ?
Best regards,
- John
Attachments:
double_dynamics_data.vi ‏54 KB

Hi John,
the sine looks like it should look with your VI!
You convert the DDT to a scalar DBL. That conversion will only use the first sample of the generated sine waveform - usually this is always the same (offset) value when you generate full periods… Or to put it in a mathematical expression: sin(0°)+4 = 4!
When you want to display waveform you should work with waveforms!
Actually, I have used Dynamic data type in order to simulate an signal.
Well, I also simulated a signal in my example VI. I didn't use any ExpressVI to do so…
In a few weeks, I will receive a sensor. I will use in LabView 'DAQ Assistant' whose the ouput is a Dynamic Data.
Nobody forces you to use the DAQAssistent ExpressVI. There are nice DAQmx functions available and LabVIEW comes with a lot of ready-to-use example VIs…
That's why, I used in first place, the 'Simulate signal'. So I think I should keep Dynamic Data Type
I do think you don't need to use the DDT. I think it's better to understand what is going on in your VI. And I think the DDT will be no help for you…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to display a text in smartform without compression

Hi,
My requirement is to print a text in a smartform with out compression of the line text.
ex. In my internal table having a line text as
'spoolno 25200 | pageno 500--> while printing in smartform, it was displayed as
''spoolno 25200 | pageno 500'.
but i want to print the line as it is in Internal table. please send me the solutions..
Thanks in advance.

If you want your text to be read-only, you can use the RichText component instead of TextArea. Search for Text Layout Framework for more info on how to mark up your text.

How to display Dynamic Message in Message Pool.

HI All,
I want to display the Error Message in Message Pool Dynamically.
By creating only one Message in Message Pool of Type Error.
I.E If user leaves the First Name and Last Name Field Blank then
Error Message Should appear as:
Please Enter First Name.
Please Enter Last Name.
How could i achieve this.....
Regards,
Dhruv Shah

Hi Dhruv,
In the Message Pool create a new Message of Type error and the Text Please enter the .
And on the action of Your Submit button write the following code :-
String strFirstName = wdContext.currentContextElement().getFirstName();
IWDMessageManager msgMgr = WdComponentAPI().getMessageManager();
IWDAttributeInfo <ObjectName> = this.wdContext.getNodeInfo.getAttribute("FirstNameField");
if( strFirstName == null || strFirstName.length() == 0)
msgMgr.reportContextAttributeMessage(wdContext.currentContextElement,<ObjectName>,IMessage<componentName>.<MessageKey>,new Object[] {"First Name"},true);

How to create dynamic windows in smartforms

Hi All,
i am creating a smartform wherein i have to print different layout for different company codes,
like if the company code belongs to an Indian company then i need to display cost center window. so can you please guide me through the procedure to create windows dynamically.
thanks in advance
pooja.

U can create different layouts for different company codes.
Declare a variable p_bukrs i.e. company code form interface.
Made u r window as condition like in the condition tab.
p_bukrs = '1000'.
Then it will call corresponding to the company code.
or
u can create different forms for different company code and u can differentiate in the driver program.
if p_bukrs = '1000'.
call function ssf .
if p_bukrs = '1500'.
call
endif.
with regards,
Kiran.G

How to display dynamic text in flash CS5....

i am using flash cs5...i created a game but when i m running it...it is showing a message saying "Fonts should be embedded for any text that may be edited at runtime, other than text with the "Use Device Fonts""
and i am not getting my dynamic text output.......please hwlp me out!!!!!!

As the error message says, you need to embed the font(s) that you use in any input or dynamic text object so that Flash will have that font to use when displaying the dynamic text. There are several different ways to accomplish this. Are you using textField objects on the stage, or are you creating instances of textFields using Actionscript?

How to display dynamic signature in Smartforms?

Similar Messages

Maybe you are looking for