Creating new Clinet in Trial ABAP 702 version

Hi All,
ive sucessful instal SAP NW Trial version, but to play my own scenarions i need to create additional clients. I maintained them in scc4, i see them in t000 table, but i cannot log in, iv used all passwords that i could use, but i failed, can you tell me hot to create those clients, and what profile to use, to log in? Is this possible in trial version? Thanks in advance.

Hi,
Below post could be of help:
http://forum.onestopsap.com/forum_posts.asp?TID=3700
Section mentioning creation of client and logging in to the new client.
Regards,
Srikishan

Similar Messages

How to create new schema or restore on full version from 11g xe backup.

hi,
the situation is i get bakup of a 11g xe installation at remote place and i have to restore only one schema out of it into
a running enterprise version of oracle database.
please tel me how many ways i can transfer one schema to full version of oracle.
i know one way is to export import schema from one data base to other.
please tel me is there any other ways to do it. which is better, if not better then at least it should be practical.
--i want that same schema be present at both places and when ever i get backup from xe it will be resorted on existing schema in full version of oracle
--or i am ready to create new schema at full version from backup of xe installation also,optionally if i can restore on it, than it will be comfortable for me.
note: schema at both end will be same.
afteter

1)can exported schem from xe be imported on full oracle ( enterprise standerd etc ,that is the paid one) ?
2)i thought , people will say when u have bakup use bakup, it is more practical than using export import.
this is where we need help.people who are working in oracle they can help us in deciding.
yours sincerley

Creating new report category in Abap HR

When I try and create a new custom report category, I get a message saying "Choose the key from the allowed namespace". I did use a Z report category (we do have Z report categories that have been created earlier by somebody else). It would be great if somebody could list the steps to create a new report category. By the way, I would just want to keep just the personnel number (PNPPERNR) in the selection option.
I did try using SM30 to create a new entry but got the same message as above.
Thanks.

>
Lakshmi Srinivasan wrote:
By the way, I would just want to keep just the personnel number (PNPPERNR) in the selection option.
> I did try using SM30 to create a new entry but got the same message as above. Thanks.
You can use the Report category HRDKPRNR to meet your reqt.
~Suresh

Creating new PCR Scenario in ABAP Workbench

Hi everyone,
I'm trying a lot to create a new scenario for the PCR functionality of Manager Self Service but I'm having some problems.
I enter in the transaction QISRSCENARIO and create a new adobe form from scratch. I created some characteristic and made a bind with some texts fields that I have created in the Adobe forms. But, here is the problem, only the PERNR characteristic it's displayed. Others like ENAME, ORGEH isn't working. Is that any other thing that I need to do to be able do display this characteristic??
Thanks,
Daniel Kiel

Hi Daniel,
Yes that's right. ISRs provide a generic framework for form processing, but you still have to add any form-specific processing such as:
Data reads
Validations
Additional functions/buttons
You may be able to reuse (by adding your scenario to the BADI filter) or copy the code from the standard scenario of course. Just check out the matching BADI implementation for the standard scenario.
Regards,
Jocelyn
P.S. Please assign points if it helped...

[syntax_error] in Creating New User - After applying SP ABAP & Basis lv 8

Hi Gurus.
actually I already created message to SAP regarding this. but i havent receieve any respond. I post here just in case maybe I can have immediate solution from you guys..
I have 2 system HLC and MFG
which is using same OS and DB
DB Information
DB client lib.     SQL_Server_8.00
DB releases        MSSQL 7.00.699 or higher, MSSQL 8.00.194
DBSL version       700.08
DBSL Patch Level   144
System Information
SAP versions       700
Operating System   Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Wi
OP release         5.2
which have same Kernel and SP patches
Kernel release    700
Sup.Pkg lvl.      146
SAP_ABA     700     0008     SAPKA70008
SAP_BASIS     700     0008     SAPKB70008
ST-PI 2005_1_700     0006     SAPKITLQI6
PI_BASIS     2005_1_700     0005     SAPKIPYJ75
Problem
previously both of the system HLC and MFG is in level 6 SP ABAP and BASIS
when i try to create EWA report for both of them, i have missing module in the report
and i read a note that i need to upgrade to level 8.
when i upgrade both of them to level 7, then i run sgen and there are no problem on both system
but when i upgrade both of them to level 8
in my MFG system, i can run sgen with no problem.
in my HLC system, i run sgen and it take a long time to validate the programs which are need to be recompiled. so i never run sgen to recompile on HLC system after i update the SP to level 8. but i believe this shouldnt be an issue.
the day after i update the SP, one of my user raise an issue.
(same issue is not happened in MFG system only in HLC system)
when we try to create new user..
SU01 -> create new user -> fill all the details -> save -> abap dumps
Error in the ABAP Application Program
The current ABAP program "/SAPSLL/CL_IM_BP_ADDRESS======CP" had to be
   terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/SAPSLL/SAPLBP_ADDRESS " in
   include "/SAPSLL/LBP_ADDRESSTOP " in
line 22:
"Statement "/SAPSLL/DEBUG_DATA" is not defined. Check your spelling . ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "

Hi all
problem is solved..
after doing some debugging, we found out
there are some missing entries in table TRMAC
so i just copy the missing entries from my MFG server to HLC server since they are both in same condition.
now i am wondering why do the support package miss to enter the rows in TRMAC table >.<
SAPache man..

Installation Procedure for SAP Netweaver 2004 Trial ABAP Version

Hi,
I am new to ABAP, and want to Install SAP Netweaver 2004 Trial ABAP Version on my system. I downloaded the software from SDN. If any one knows the Installation Preocedure, please send me it will be very helpful for me.
Regards,
Mithun Birabinth.

Please check the SMP:
http://service.sap.com/instguides & navigate accordingly.
PS:
Award points if your question is resolved.

Create new versions when making adjustments?

Hi,
What does anyone suggest this setting should be set to? It's on the Advanced Tab in Preferences.
I think it was un checked when I installed the Trial Version.
The help file stated the following:-
+Create new versions when making adjustments” checkbox: Select this checkbox to have Aperture automatically create a new version when you adjust a selected image. The adjustment is applied to the original version and the new one is left untouched.+
So when I edit an image the the software makes a copy and the original is altered? What happens if it's left un checked?
Any help on the whole editing thing would be gratefully received.

This is just a way to automatically create a new version when you make an adjustment. The new version is stacked with an unaltered version, allowing you to quickly see them side by side. What you have to remember is that the *original file is never altered*. This is all virtual. What is called original in this case is in fact an original version, not the actual file. The actual file is called the Master. Very important to understand the distinction.
I personally leave this off. I never use RAW files without adjustments so there's no point in keeping an unaltered version around, plus it tends to quickly multiply versions and just creates clutter. If I want to see the original file I just hit M (this is the default command key for Show Master). Hit M again and I'm back to my version. If I've created a version and want to do a new different looking one starting from scratch, I can select New Version From Master: presto a new "original"!
If I've worked on a picture and want to create a BW version, chances are I want to keep the work I've already done as a starting point. In that case I select Duplicate Version and do my BW on the new version. Again, I'm never actually duplicating files and I'm never actually altering pixels, original or otherwise. This is all a set of xml instructions that Aperture applies when it displays the files.
Helping?
Message was edited by: Jade Leary

Aperture creating new version of image for each adjustment applied!

To anyone out there who can sort this one out, I will be forever grateful!
Here's the problem. I'll be jamming away in Aperture, adjusting photos like a madman. After adjusting a random number of photos (it usually varies between 5-30 photos or so after starting Aperture each time), the adjustments panel will no longer update when I click on a new image (i.e. it holds the info from the last image I adjusted and will continue to apply new adjustments to that last image even if another image is highlighted). If I switch to the metadata panel and then back to adjustments it will refresh itself and recognize the currently selected image (although I have to do this for EACH image I want to adjust once it starts acting up like this). The BIG problem is that even if I get the adjustments panel to recognize the selected image at this point, for EACH adjustment I apply it makes a new version of the image. For example, if I first change the contrast, it will make Version 2 of the image and select it (which is what it's supposed to do for the first adjustment, because I have "create new versions when making adjustments" checked in my preferences), but if I then make another adjustment like changing the saturation, it makes Version 3 of the image (from the master, so that only the saturation adjustment is applied and not the contrast adjustment). As you can imagine, this utterly destroys my once incredibly efficient Aperture workflow and makes it pretty much impossible to use Aperture for adjustments unless I turn off "create new versions when making adjustments" in the preferences, at which point it does seem to work again (although I've only tried it on a few images, so not 100% sure it will work properly even then). If I restart Aperture (or my computer), it will work normally again for a few pictures and then will start acting up again with the same problem.
Originally I was running into this problem on my PowerBook G4, and so I figured it was just because Aperture didn't like my wussy G4 processor and was acting up when the load got too heavy (after all, the adjustments would work fine for up to 30 images or so). However I recently purchased a sexy iMac 24" 2.8 GHz and maxed out the RAM to 4GB, but I'm still getting the same darned problem with Aperture on my iMac. Yes, I'm using the same library of photos I was using on my PowerBook G4.
This problem has been plaguing me for about 3 months now (everything else in Aperture works fine so I'm still using it to import and organize my photos, I just haven't been able to make adjustments on large groups of pictures for a while), and I've searched and searched these forums countless times to see if anyone has run into similar problems, but I've not seen a single mention of it. I've also tried EVERYTHING mentioned for similar problems (rebuilding library, vacuuming database, erasing com.apple.aperture.plist preference file, repairing permissions, reinstalling Aperture, making burnt offerings to Steve Jobs), and NOTHING is working. ARRGH!!
For those who might have some words of wisdom to offer this delighted-***-miserably frustrated Aperture user, here are a few more details about my setup:
I have a library of about 37,000 photos, the vast majority of them being RAW .CRW files from a Canon 10D. The 25GB library file is stored on my internal hard drive, and all photos are referenced from an external LaCie 500GB FireWire 400 hard drive. I have a LOT of export plug-ins installed in Aperture, but no image adjustment plugins. I have generated previews turned off for all projects. I've had the same problem on both my PowerBook G4 and new iMac 24" 2.8 GHz. One other thing worth mentioning is that instead of upgrading from 2.1 (which was already giving me this problem) to 2.1.2, I downloaded the full version of 2.1.2 and installed it. I noticed that my 2.1 Aperture.app file was less than 100MB, whereas the 2.1.2 Aperture.app file is over 300MB. Don't know if that's normal or not.
The only other thing I can think of to try at this point is to load a new library into Aperture and import a large group of pictures and make adjustments to them to potentially see if my problem is being caused by Aperture or by the library. Will probably try that tomorrow.
I would appreciate any advice or feedback anyone can offer about this nasty little problem, as it's giving me a serious hormonal imbalance.
THANKS!

Thanks for the reply RB, but my current workflow depends on me creating new versions when I make adjustments. I suppose as a temporary solution I will probably have to either turn this preference off or just be willing to constantly restart Aperture. At least I finally found another thread with the same problem, so finally I don't feel completely alone in the far reaches of the Aperture universe. For anyone who is interested, here is the link to that thread:
http://discussions.apple.com/thread.jspa?messageID=8555067
It appears this problem is closely related to the ubiquitous black viewer problem that seems to be plaguing far more users than my issue (although I've run into the black viewer problem a few times myself), as both problems force Aperture to output the following message to Console:
Main Thread Exception in Aperture: * -NSCFArray objectAtIndex:: index (1) beyond bounds (1)
It seems that both of these problems existed in Aperture 1 and 1.5 up until the 1.5.6 upgrade which seems to have fixed it, but then with Aperture 2 the problem seems to have returned. At least that's the gist of what I've been reading on a number of threads. Whatever the case, I hope Apple gets this sorted out in their next update!
As it appears there is no proper answer to this problem at the moment, I'm gonna go ahead and mark this thread answered (and since you were kind enough to at least take the time to reply RB, you can be credited with the answer... thanks!).

Aperture creating new versions unexpectedly

One of my projects in Aperture started behaving unexpectedly yesterday and I still haven't figured out why. I was reviewing proofs with a client and we were making selections and adjustments to some of the images. We were working in a smart album that was filtered on 5-star ratings. We made a few new versions of some of these images within the smart album, made adjustments, and ultimately selected her picks by adding the keyword "pick" to her selected images. In retrospect I probably will change that flow so that when I make my original selects I will rate them as a 4-star and then up it to a 5-star when the client makes their picks.
But for now, back to the problem. All was going well with the workflow until I tried to rearrange some of the images within the smart album. When I dragged the first image to a new location it created new versions of several images. I think this happened multiple times before I realized what had happened, so before I new it the album was filled with duplicate versions. I deleted the duplicate versions, but I find that they keep cropping up unexpectedly. If I go to the parent project and then return to the smart album, it makes a duplicate version of every image in the album.
A light table and a book within the project are now also giving me trouble in that they claim to have images in them, but even with all queries turned off they do not show any of the images (and yes, the "show all images" button is selected).
Any thoughts on what could be wrong?
G5 Mac OS X (10.4.3)

Mmm...I don't think this explanation tells the whole story.
Dragging an image out of the project container and into an enclosed (non-smart) album does NOT automatically generate a new version of the master image local to that album; instead, the album is populated with a new reference to the original version. Dragging that same image again out of the project container - or the first album - to yet another album generates yet another reference to the same underlying version.
Edits performed in any of these containers propagate to the images in all containers (within a particular project, of course), demonstrating that each type of container holds merely a reference to the project's single original version.
The Aperture User Manual is a bit ambiguous in its description (Chapter 5 pg 113) of the distinction between "copying" and "moving" images between projects and albums; I believe that when it refers to copying versions it's really talking about copying REFERENCES to versions between various containers.
So, long story short, I don't think moving images between the various types of containers within a single project can explain your duplicated images.
15" Alu PB 1.25GHZ G4 FW800 1GB RAM 100GB HDD Mac OS X (10.4.6) Aperture 1.1.1

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display/

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display.

There are two things we use the name "Slideshow" for in Aperture: a Slideshow Album, used for making Slideshows, and the Slideshow that is made. (Imho, it is a design mistake to not call the containers used to create Slideshows, Books, etc., "Albums".)
The Slideshow will use the Album Pick from any Stack. A good way to use Aperture is to promote the Image you want to regularly use (such as, for example, a Version with adjustments) to the top of the Stack. This makes it the Stack Pick, and will be the default Album Pick. If you haven't done that, you can still change the Album Pick for any Stack in a Slideshow Album. Expand your Stack(s), select the Image in each Stack that you want to be the Album Pick (and thus shown in the Slideshow), and "Stacks➞Set Album Pick". (Note the keyboard shortcut; there is also a Toolbar icon for this.) The change is immediate. The Slideshow will always show the Album Pick (or, if there is not one, the Stack Pick) for every Stack in your Slideshow Album.

Error creating a new project in trial system

I recently registered for a trial system to check Netweaver Gateway and build some sample services. Unfortunately could able to create a new project and being challenged with attached error"You are not authorised to create a new project "
Does this mean the trial system/demo system only allows to consume the sample services but not create new services?

Yes. demo system only allows to consume sample services. see this discussion How to create new gateway services using SAP Gateway demo system
Regards,
Chandra

Problems creating new Web Dynpro ABAP application

All,
I am following this tutorial to create my first Web Dynpro ABAP application
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/fc/501b42b5815133e10000000a155106/frameset.htm
In this tutorial I was asked to create a component as Local object.
But after giving the name of the component, I get an alert saying
"Object can only be created in SAP Package"
When I confirm this, I was shown a "Create Object Directory entry" dialog box which asks for attributes like Package.
And this box has Local Object button, when clicked I get the message "Test Objects cannot be created in foreign namespaces".
I found some other article through Google
http://www.octavia.de/fileadmin/octavia_files/content_bilder/Hauptnavigation/SAP_NetWeaver/WebDynpro/Web_Dynpro_Part_I.pdf
According to this, I tried to give $TMP as Package. But still have the same error
"Test Objects cannot be created in foreign namespaces"
Where am I and what should I do to create a new project?
Thanks.

Thanks Abinav.
My problem is with naming convention only. Component name starting with Z solved my problem.

I have an MP4 home vid in itunes. I cannot get it onto my ipad. I tried "create new version" to make it into a format suitable for ipad, but the options were greyed out. Any help appreciated.

I have created a home video, using my Panasonic Camera, and a high definition SD card. It is now on my computer as anMTS file, which I converted into an MP4 as well.
But I cannot get this file onto my ipad. I have tried countless ways. I finally today thought I had the answer..........the MP4 file is now in Itunes (I hate itunes, it is so user-unfriendly) and I read that I need to click on it, go to "create new version" and select the ipad version. But those options were greyed out. !!! Aaargh! Frustration! Any help gratefully recieved.

You can try and import your MP4 using free OPlayer HD Lite via File Sharing.
https://itunes.apple.com/sg/app/oplayerhd-lite-best-free-video/id385896088?mt=8

Problem in creating new objects in ABAP workbench

Hi ,
I am getting error in a newly installed SAP system when try to create new objects in ABAP workbench. The error is like'No changes for the user allowed'.
Can you tell me what the error is here? What can be done for this so that I can create new object.
Thanks,
Manas

Hi,
Run tcode SU01. (Provided if u hav authorization to run this Tcode)
Enter SAP* as user and click on the Copy button.
Enter the name for your new user in the dialog box and click Continue
Enter a password for your new user.
Goto Profile sheet and adjust the profiles to be SAP_ALL and SAP_NEW.
Save the user and logon with it.
Now you'll be able to do your changes.
Reward Points if useful.
Regards
Rose
Edited by: Rose Preethi on Mar 31, 2008 5:20 PM

Problem in creating new versions for existing DIR using CV01N

I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.B

There is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110.    "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
    +**EXPORTING**+
      +**is_draw = ls_draw**+
    +**TABLES**+
      +**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B

Creating new Clinet in Trial ABAP 702 version

Similar Messages

Maybe you are looking for